Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WAVE FORMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High-electric-field behavior of the metal-insulator transition in TiS3 nanowire transistors

We investigate the behavior of the metal-insulator transition (MIT) in TiS 3 nanowire field-effect transistors, in the strongly nonequilibrium limit that has, thus far, largely been neglected. Under high electric fields within the TiS 3 channel (≤115 kV/cm), we observe the emergence of a critical fixed point, separating insulating and metallic regions in the transfer curves of the device. The critical gate voltage that defines this fixed point evolves systematically with the drain bias (field), allowing us to map out a phase diagram that identifies the conditions for metallicity or for insulating behavior. Dependent upon the choice of the gate voltage used to tune the carrier concentration in the nanowire, the existence of the field-induced MIT allows the TiS 3 to be either insulating or metallic over an extensive range of temperature. The possible connection of this strongly nonequilibrium state to some form of charge density wave is discussed.

2D materials↗
DOE OSTI2023

Electromagnetic pinned solitons for space debris detection

Electromagnetic “pinned” solitons in the form of stationary nonlinear waves are studied within the framework of an inertial magneto-hydrodynamic model. These structures, that can arise when a charged source moves in a magnetized plasma, have a velocity that is equal to the source velocity and, hence, appear as “pinned” structures that envelope the source. We investigate the excitation of such solitons in the Low Earth Orbit region due to the passage of charged orbital debris objects. The spatial size of these electromagnetic solitons, typically of the order of a few ion skin depths, can be very large in this region. Such solitons can be detected using a variety of ground- or orbit-based radio sounding techniques and may provide a convenient additional means of tracking small sized orbital debris objects that are difficult to spot optically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Real-space atomic dynamics in liquid gallium studied by inelastic neutron scattering

Gallium is a prototypical liquid metal and has gained renewed attention because of its unique properties. Characterizing and elucidating its atomic dynamics remains elusive despite numerous studies, primarily because of the challenges in quantifying atomic-scale dynamics in liquids. Recent developments in inelastic neutron scattering enable us to measure the Van Hove correlation function that describes the real-space motion of liquid atoms. Here, in this work, we use this approach to reveal the dynamics in gallium liquids and find the co-existence of two dynamical medium-range orders (MROs), which have a dynamical behavior distinct from that of the short-range order (SRO). We propose that these MROs are driven by global forces in the form of two density waves, as a direct consequence of the underlying competition between ionic core repulsion and valence electron cohesion. We suggest that the density wave approach is not only applicable to other metallic liquids exhibiting similar structural anomalies, but also offers a promising direction for elucidating the dynamics of complex liquids and glasses by linking electronic-state fluctuations to atomic dynamics.

Hua, Chengyun [Oak Ridge National Laboratory (ORNL↗
DOE OSTI2024

Algebraic model to study the internal structure of pseudoscalar mesons with heavy-light quark content

The internal structure of all lowest-lying pseudoscalar mesons with heavy-light quark content is studied in detail using an algebraic model that has been applied recently, and successfully, to the same physical observables of pseudoscalar and vector mesons with hidden-flavor quark content, from light to heavy quark sectors. The algebraic model consists on constructing simple and evidence-based of the meson’s Bethe-Salpeter amplitude (BSA) and quark’s propagator in such a way that the Bethe-Salpeter wave function (BSWF) can then be readily computed algebraically. Its subsequent projection onto the light front yields the light front wave function (LFWF) whose form allows us a simple access to the valence-quark parton distribution amplitude (PDA) by integrating over the transverse momentum squared. We exploit our current knowledge of the PDAs of lowest-lying pseudoscalar heavy-light mesons to compute their generalized parton distributions (GPDs) through the overlap representation of LFWFs. From these three dimensional knowledge, different limits/projections lead us to deduce the related parton distribution functions (PDFs), electromagnetic form factors (EFFs), and impact parameter space GPDs (IPS-GPDs). When possible, we make explicit comparisons with available experimental results and earlier theoretical predictions. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Nanoscale electronic inhomogeneities in 1⁢ T ⁢-TaS 2

Here, we report a set of scanning tunneling microscopy (STM) and spectroscopy (STS) experiments studying native defects in CVT grown 1⁢T–TaS 2 . Six different sample surfaces from four bulk crystals were investigated. Wide area imaging reveals a prevalence of nanometer-scale electronic inhomogeneities due to native defects, with pristine regions interspersed. These inhomogeneities appear in typical as-grown crystals and coexist with a well-formed commensurate charge density wave of 1T–TaS 2 at low temperatures. Electronic inhomogeneities show up both as variations in the apparent height in STM and in the local density of states in STS; the bands can shift by 60 meV and the gap varies by more than 100 meV across inhomogeneities. These inhomogeneities are present in similar concentration across large-scale areas of all samples studied, but do not influence the charge density wave formation on local or global scales. The commensurate charge density wave exhibits long-range order and remains locally intact in the presence of these inhomogeneities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characteristics of thermospheric infrasound predicted using ray tracing and weakly non-linear waveform analyses

Infrasonic signals refracted by thermal gradients in the rarefied upper atmosphere are modeled using a combination of ray tracing and weak shock theory to develop an understanding of thermospheric infrasound signals produced by energetic, transient sources. Canonical arrival structures in the form of u-wave signatures are identified for returns refracted at lower altitudes within the thermosphere, and possible multi-pathing produced by effective sound speed inflections are investigated to elucidate more complex arrival structures, which are found to be spatially localized. Furthermore, variability in the source characteristics is investigated and it is found that whereas some waveform phase information is lost due to finite amplitude effects, arrival characteristics are strongly dependent on the peak overpressure near the source. Variability in the propagation path is considered using archived atmospheric specifications and implies that despite uncertainties related to the dynamic and sparsely sampled nature of the atmosphere, thermospheric signatures might be useful in estimating the yield for explosive sources. Last, thermospheric arrivals from a failed rocket launch, as well as those from several large chemical explosions, are analyzed and it is found that qualitative trends match those predicted, and analyses here provide additional insight into such signatures.

42 ENGINEERING↗
DOE OSTI2020

A simple hydride model for cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a known roughness or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle relative to the gas. A simple model is developed, assuming that the particle remains intact and spherical, to capture the heat and mass transfer that occurs during this process. Model performance is evaluated by comparing with cerium ejecta experiments where the particles are ejected into deuterium gas at initial pressures of 4 and 8 atm. Overall, the model is able to capture the approximately 400 K increase in particle temperature above the surrounding gas temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A simple hydride model for cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a known roughness or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle relative to the gas. A simple model is developed, assuming that the particle remains intact and spherical, to capture the heat and mass transfer that occurs during this process. Model performance is evaluated by comparing with cerium ejecta experiments where the particles are ejected into deuterium gas at initial pressures of 4 and 8 atm. Overall, the model is able to capture the approximately 400 K increase in particle temperature above the surrounding gas temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A hydride model for solid and liquid cerium ejecta particles

Cerium ejecta particles form after a shock wave impacts a cerium plate with a rough surface or prescribed surface perturbation. When these particles are ejected into hydrogen or deuterium gas the material reacts exothermically and raises the temperature of the particle. Two models are developed to capture the heat and mass transfer that occurs during this process. One model assumes that for larger solid ejecta particles, the loss of mass is negligible while for smaller liquid ejecta particles, the loss of mass during reaction is accounted for. The loss of mass is assumed to occur from the hydride layer being extremely brittle and the fact that it will be relatively easy for the hydride material on the outside of the particle to go into tension, crack and flake off. The model is tested by performing simulations similar to the original experiments that motivated the development of these models and comparing the particle temperatures. While the model is able to capture some general features of the flowfield, inaccuracies clearly exist that must be addressed and the results underscore the need for more isolated experiments where fewer assumptions and physical processes are present simultaneously.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1972

Finite-amplitude pressure waves in the radial mode of a cylinder

A numerical study of finite-strength, isentropic pressure waves transverse to the axis of a circular cylinder was made for the radial resonant mode. The waves occur in a gas otherwise at rest, filling the cylinder. A method of characteristics was used for the numerical solution. For small but finite amplitudes, calculations indicate the existence of waves of permanent potential form. For larger amplitudes, a shock is indicated to occur. The critical value of the initial amplitude parameter in the power series is found to be 0.06 to 0.08, under various types of initial conditions.

Kubo, I.↗
NASA NTRS1973

Theory of disordered Heisenberg ferromagnets

A Green's function technique is used to calculate the magnetic properties of Heisenberg ferromagnets in which the exchange interactions deviate randomly in strength from the mean interaction. Systems of sc, bcc, and fcc topologies and of general spin values are treated. Disorder produces marked effects in the density of spin wave states, in the form of enhancement of the low-energy density and extension of the energy band to higher values. The spontaneous magnetization and the Curie temperature decrease with increasing disorder. The effects of disorder are shown to be more pronounced in the ferromagnetic than in the paramagnetic phase.

Stubbs, R. M.↗
NASA NTRS1973

The design and development of an automatic control system for the in-duct cancellation of spinning modes of sound

The reduction is discussed of the discrete tones generated by jet engines which is essential for jet aircraft to meet present and proposed noise standards. The discrete tones generated by the blades and vanes propagate in the inlet and exhaust duct in the form of spiraling acoustic waves, or spinning modes. The reduction of these spinning modes by the cancellation effect of the combination of two acoustic fields was investigated. The spinning mode synthesizer provided the means for effective study of this noise reduction scheme. Two sets of electrical-acoustical transducers located in an equally-spaced circular array simultaneously generate a specified spinning mode and the cancelling mode. Analysis of the wave equation for the synthesizer established the optimum cancelling array acoustic parameters for maximum sound pressure level reduction. The parameter dependence of the frequency ranges of propagation of single, specified circumferential modes generated by a single array, and of effective cancellation of the modes generated by two arrays, was determined. Substantial sound pressure level reduction was obtained for modes within these limits.

Harrington, W. W.↗
NASA NTRS1973

Nonthermal turbulent heating in the solar envelope.

It is shown that MHD pulses, in the form of fast magnetosonic waves or solitons, can produce a strong electron-ion coupling capable of maintaining electron-proton temperature equilibrium in the solar envelope. The mechanism producing the nonthermal heating is the fluid-like modified two-stream instability, which, since it is essentially independent of the electron-proton temperature ratio and the value of beta, becomes a prime candidate for the anomalous collisions required by the fluid models inside a distance less than 30 solar radii, in order to explain the dominant features of the solar-wind flow.

Papadopoulos, K.↗
NASA NTRS1974

Chromospheric flares and sudden commencements of geomagnetic storms

A catalogue of flare activity was compiled during 1957-1967 (the solar activity cycle). By comparing all reliable SC during this period with chromospheric flares, the following conclusions are drawn; (1) There is no statistically significant correlation between SC and chromospheric flares. (2) The assumption that a shock wave propagates throughout the entire hemisphere is unjustified and contradicts the fact of recurrence of SC. (3) A statistically significant correlation was established between SC and chromospheric flares, that is, a relationship between a SC and the moment that a flare active region transits the Central Meridian. (4) SC are caused by shock waves or tangential discontinuities formed at the western boundary of the quasisteady directed corpuscular flux or at the boundary between sectors.

Nesmyanovich, A. T.↗
NASA NTRS1974

Jupiter entry simulation with the ANAA shock tube

An annular arc accelerator (ANAA) shock tube has been built which produces shock velocities and pressures that simulate entry into the atmosphere of Jupiter. The ANAA driver deposits the energy of an arc discharge into a flowing gas, which then expands and cools without any delay for the opening of a diaphragm. A flow transducer, trigger system, and spark gap switches have been developed to coordinate the flow from a high-pressure helium driver with the discharge from a 300-kJ capacitor bank. Shock velocities up to 47 km/sec have been produced in 1.0 torr of hydrogen with the ANAA shock tube, compared with 35 km/sec velocity produced in a conical arc driver with three times the available energy. Attenuation with the ANAA shock tube is comparable to that of a conical arc driver shock tube, and initial spectroscopic measurements indicate that an impurity-free test slug is formed behind the shock wave.

Leibowitz, L. P.↗
NASA NTRS1977

Cooling of a sunspot

The question of whether a perturbed photospheric area can grow into a region of reduced temperature resembling a sunspot is investigated by considering whether instabilities exist that can lead to a growing temperature change and corresponding magnetic-field concentration in some region of the photosphere. After showing that Alfven cooling can lead to these instabilities, the effect of a heat sink on the temperature development of a perturbed portion of the photosphere is studied. A simple form of Alfven-wave cooling is postulated, and computations are performed to determine whether growing modes exist for physically relevant boundary conditions. The results indicate that simple inhibition of convection does not give growing modes, but Alfven-wave production can result in cooling that leads to growing field concentration. It is concluded that since growing instabilities can occur with strong enough cooling, it is quite possible that energy loss through Alfven waves gives rise to a self-generating temperature change and sunspot formation.

Boruta, N.↗
NASA NTRS1979

Asymmetry of a circular jet observed in near and far fields

Turbulence intensity measurements were made in three different-size jets at various Mach numbers and the aerodynamic jet axis, defined as the locus of points in the flow at which the turbulence intensity is minimum, was determined. The deviations from the geometrical jet axis were on the order of 2-4% of the nozzle diameter, and the pure jet axis had the form of a helical wave. A similar asymmetry in the radiated noise was also noted. The measured circumferential distribution of rms fluctuating velocity signals confirmed the asymmetry of even a circular jet.

Yamamoto, K.↗