Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WASTE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Flanged Tritium Waste Containers: Waste Characterization Information for Container FTWC-229

The following information packages present the radiological data as well as physical properties of the four Flanged Tritium Waste Containers currently stored at TA-54, Area G. Also included are summaries of the contents of each container (including waste logs) as well as photographs of the inner and outer portions of each container.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hanford Waste Treatment Plant Low Activity Waste Facility Stack Effluent Monitoring - Sampling Probe Location Qualification Evaluation

The Hanford Tank Waste Treatment and Immobilization Plant low activity waste (LAW) facility stack monitor locations were qualified using scale model stacks to mitigate the risk of identifying that sampling locations do not meet the qualification criteria on the full-scale stack. As required by the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999 standard, the scale model and its sampling location were geometrically similar to the actual stack and the Reynolds numbers for both the actual and model stacks were >10,000. An additional criterion is that the product of the hydraulic diameter and mean velocity (DV) of the full-scale stack must be between 1/6 DV and 6 DV of the scale model stack tests. Verification tests of the LAW stacks were performed at normal operating conditions. The minimum 1/6 DV value, along with the maximum 6 DV value from the scale model testing determines the range of conditions for which the full-scale stack may be operated and remain in compliance with the stack verification criterion. Based on these DV values, the corresponding stack flow rates for each of the LAW stacks are 815–55,758 scfm for LV-S1, 980–112,078 scfm for LV-S2, 264–22,901 scfm for LV-S3, and 981–79,832 scfm for LV-C2. The remaining criteria for the stack verification to be considered valid involve the flow angle and velocity uniformity results. First, the flow angle at the full-scale stack must be =20°. Second, the velocity uniformity at the full-scale stack must be =20% coefficient of variance (COV). Finally, the velocity uniformity results for the actual and scale model stack tests must agree within 5% COV. These criteria were met through the full-scale stack tests at the LAW facility. Flow angle results were primarily less than 10°, except for one LV-S2 Fan A result, which was 13.2°; all flow angle results were within the =20° criterion. The velocity uniformity results for each test condition ranged between 1.5 COV and 9.2% COV, which were all within the range of the target % COV values from the scale model tests. Based on these stack verification test results, the four LAW filtered exhaust stack sampling locations meet the qualification criteria provided in the ANSI/HPS N13.1-1999 standard for all fan operating configurations. This includes single-fan operating conditions for LV-S1 and LV-S2, dual-fan operations for LV-S3 at both the continuous air monitor and record sampler locations, and both the single-fan as well as the dual-fan operations for LV-C2. Further changes to the system configuration or operating conditions that are outside the bounds described in this report may require additional tests or analyses to determine compliance with the standard.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Hanford Waste Treatment Plant Low Activity Waste Facility Stack Effluent Monitoring: Sampling Probe Location Qualification Evaluation (Rev.1)

The Hanford Tank Waste Treatment and Immobilization Plant Low Activity Waste (LAW) facility stack monitor locations were qualified using scale model stacks to mitigate the risk of discovering that sampling locations do not meet the qualification criteria on the full-scale stacks. As required by the American National Standards Institute/Health Physics Society (ANSI/HPS) N13.1-1999 standard, the scale model and its sampling location were geometrically similar to the actual stack and the Reynolds numbers for both the actual and model stacks were >10,000. An additional criterion is that the product of the hydraulic diameter and mean velocity (DV) of the full-scale stack must be between 1/6 DV and 6 DV of the scale model stack tests. Verification tests of the LAW stacks were performed at normal operating conditions. The minimum 1/6 DV value, along with the maximum 6 DV value from the scale model testing, determines the range of stack flow rates for which the full-scale stack may be operated and remain in compliance with the stack verification criterion. For this analysis, the range of qualified flow rates listed is conservatively based on the average DV through 6 DV for LV-S1, LV-S2, and LV-C2, and 1/3 DV to 3 DV for LV-S3. Table S1 lists the operating flow rates along with the conservative lower and upper qualified stack flow rates for each of the LAW facility stacks. For each stack, the operating flow is below the upper qualified stack.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Reassessment of Dose Contributions from the Paducah Cask Special Waste Form Buried in the E-Area Low-Level Waste Facility

During a recent revision to the groundwater and inadvertent human intruder screening analysis report (Aleman and Hamm, 2023), weaknesses within the screening logic were observed resulting in the addition of U-235 being brought back into the list of radionuclides requiring inventory limits within the Paducah Cask special waste form (SWF). In addition, while reviewing the earlier vadose zone transport analysis efforts, an inconsistency was observed in the initial U-235P inventory that was supplied to the Consolidated Waste Tracking System (CWTS) back in 2009.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Bacterial Productivity in a Ferrocyanide-Contaminated Aquifer at a Nuclear Waste Site

This study examined potential microbial impacts of cyanide contamination in an aquifer affected by ferrocyanide disposal from nuclear waste processing at the US Department of Energy’s Hanford Site in south-eastern Washington State (USA). We examined bacterial productivity and microbial cell density in groundwater (GW) from wells with varying levels of recent and historical total cyanide concentrations. We used tritiated leucine (3H-Leu) uptake as a proxy for heterotrophic, aerobic bacterial productivity in the GW, and we measured cell density via nucleic acid staining followed by epifluorescence microscopy. Bacterial productivity varied widely, both among wells that had high historical and recent total cyanide (CN−) concentrations and among wells that had low total CN− values. Standing microbial biomass varied less, and was generally greater than that observed in a similar study of uranium-contaminated hyporheic-zone groundwater at the Hanford Site. Our results showed no correlation between 3H-Leu uptake and recent or historical cyanide concentrations in the wells, consistent with what is known about cyanide toxicity with respect to iron speciation. However, additional sampling of the CN− affected groundwater, both in space and time, would be needed to confirm that the CN− contamination is not affecting the GW biota.

Plymale, Andrew (ORCID:0000000333070155)↗

Waste management health risk assessment: A case study of a solid waste landfill in South Italy

An integrated risk assessment study has been performed in an area within 5 km from a landfill that accepts non hazardous waste. The risk assessment was based on measured emissions and maximum chronic population exposure, for both children and adults, to contaminated air, some foods and soil. The toxic effects assessed were limited to the main known carcinogenic compounds emitted from landfills coming both from landfill gas torch combustion (e.g., dioxins, furans and polycyclic aromatic hydrocarbons, PAHs) and from diffusive emissions (vinyl chloride monomer, VCM). Risk assessment has been performed both for carcinogenic and non-carcinogenic effects. Results indicate that cancer and non-cancer effects risk (hazard index, HI) are largely below the values accepted from the main international agencies (e.g., WHO, US EPA) and national legislation ( and ).

54 ENVIRONMENTAL SCIENCES↗

Experimental Design for Hanford Low-Activity Waste Glasses with High Waste Loading

This report discusses the development of an experimental design for the initial phase of the Hanford low-activity waste (LAW) enhanced glass study. This report is based on a manuscript written for an applied statistics journal. Appendices A, B, and E include additional information relevant to the LAW enhanced glass experimental design that is not included in the journal manuscript. The glass composition experimental region is defined by single-component constraints (SCCs), linear multiple-component constraints (MCCs), and a nonlinear MCC involving 15 LAW glass components. Traditional methods and software for designing constrained mixture experiments with SCCs and linear MCCs are not directly applicable because of the nonlinear MCC. A modification of existing methodology to account for the nonlinear MCC was developed and is described in this report. One of the glass components, SO 3 , has a solubility limit in glass that depends on the composition of the balance of the glass. A goal was to design the experiment so that SO 3 would not exceed its predicted solubility limit for any of the experimental glasses. The SO 3 solubility limit had previously been modeled by a partial quadratic mixture model expressed in the relative proportions of the 14 other components. The partial quadratic mixture model was used to construct a nonlinear MCC in terms of all 15 components. In addition, there were SCCs and linear MCCs. This report describes how a layered design was generated to (i) account for the SCCs, linear MCCs, and nonlinear MCC and (ii) meet the goals of the study. A layered design consists of points on an outer layer, and inner layer, and a center point. There were 18 outer-layer glasses chosen using optimal experimental design software to augment 147 existing glass compositions that were within the LAW glass composition experimental region. Then 13 inner-layer glasses were chosen with the software to augment the existing and outer-layer glasses. The experimental design was completed by a center-point glass, a Vitreous State Laboratory glass, and replicates of the center point and Vitreous State Laboratory glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

M-Area Mixed Waste Glasses: II: Durability and Viscosity Testing of High Aluminum and Uranium Containing Borosilicate Waste Glasses

Radioactive waste sludges that were high in A l2 O 3 (14.17 to 29.02 wt%) and U 3 O 8 (2.93 to 5.66 wt%) while being simultaneously low in Fe 2 O 3 (1.26 to 2.01 wt%) were vitrified into borosilicate glass in the Savannah River Site’s (SRS) M-Area. The overall Na 2 O concentrations of borosilicate and soda-lime-silica (SLS) glasses studied at the Savannah River National Laboratory (then the Savannah River Technology Center) prior to startup of the M-Area melter ranged from 6.80 to 27.09 wt%, while the B 2 O 3 concentrations ranged from 0.04 to 32.62 wt%.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Effect of Sulfate Sequestration by Ba-Sn Composite Material on Re Retention in Low-Activity Waste Glass

Difficulty incorporating radioactive Tc-99 into glass during vitrification of low-activity waste (LAW) at the Hanford Site is a technical challenge. Previous studies suggested that the presence of sulfate salts in the melt hinder the incorporation of Re, a non-radioactive surrogate for Tc-99, into nuclear waste glass. In this study, we assessed the capability of a Ba-Sn composite to sequester sulfate during vitrification of AN-102 LAW feed and the resulting effects on Re retention in the glass. We also investigated a feed where the initial soluble sulfate source in the simulated LAW (Na2SO4) was replaced with insoluble BaSO4. The Ba-Sn composite-treated feed and BaSO4-substitute feed were compared to a control, AN-102 baseline. The feeds were prepared and then heated to temperatures from 400-1000 °C at 5 °C/min and air-quenched to room temperature. The heated samples and dried feeds were leached in deionized water. The solutions from the leach test were analyzed by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) to determine the amount of soluble sulfate as a function of temperature and the resulting solids were analyzed for Re retention. Although the Ba-Sn composite material successfully sequestered sulfate in the as-prepared LAW feed, heating to 400 °C resulted in most of the sulfate partitioning to a soluble salt phase. By 700°C, sulfate partitioning in the composite-treated feed was identical to the baseline feed. Throughout the entire temperature range the BaSO4-substitute feed behaved similarly to the composite-treated feed. The results of the study show that sequestering sulfate into a BaSO4 phase is ineffective for rhenium retention as the sulfate salt behavior was identical in the three feeds at =700 °C. The fraction of rhenium retained in the glass at 1000°C varied from 39.4-46.6% for the three feeds, which is shown to be an insignificant difference.

George, Jaime L.↗

Effects of Sulfate on Rhenium Incorporation into Low-Activity Waste Glass

Technetium-99 (99Tc) is a major radionuclide of concern in the Hanford low-activity waste (LAW), which will be vitrified into borosilicate glass at the Waste Treatment and Immobilization Plant (WTP). Sulfate content in LAW has been known to be a critical factor affecting the volatile loss of 99Tc during melting of the LAW glass feed (a mix of liquid LAW and mineral/chemical additives). We investigated rhenium (a nonradioactive surrogate for 99Tc) incorporation into glass by performing crucible melting tests of two representative simulated LAW glass feeds, each prepared with varied sulfur levels. The sulfate content varied from the original content to half of the original (½S) and to zero (0S), in the range of 0 to 0.8 mass % SO3 in glass if 100% retained. The slurry feeds were dried at 105°C and heated to 400–1100°C. Deionized water leach at room temperature and at 80°C was conducted on the dried feed and heat-treated samples to analyze the chemical compositions of soluble and insoluble phases separately and to profile the partitioning of various components into different phases during the melting process. Different partitioning behavior of rhenium, sulfate, and chlorine is discussed in connection with major feed-to-glass conversion reactions. The mechanism on how sulfate affects rhenium incorporation during feed-to-glass conversion reactions, and so final retention of rhenium in glass, is proposed based on the two hypotheses that segregated sulfate-rich phase forms during feed conversion reactions and Re preferentially partitions to this sulfate-rich phase.

Jin, Tongan↗

Redox-Dependent Solubility of Technetium in Low Activity Waste Glass

The solubility of technetium was measured in a Hanford low activity waste glass simulant. The simulant glass was melted, quenched and pulverized to make a stock of powdered glass. A series of glass samples were prepared using the powdered glass and varying amounts of solid potassium pertechnetate. Samples were melted at 1000°C in sealed fused quartz ampoules. After cooling, the bulk glass and the salt phase above the glass (when present) were sampled for physical and chemical characterization. Technetium was found in the bulk glass up to 2000 ppm (using the glass as prepared) and 3000 ppm (using slightly reducing conditions). The chemical form of technetium obtained by x-ray absorption near edge spectroscopy can be mainly assigned to isolated Tc(IV), with a minority of Tc(VII) in some glasses and TcO 2 in two glasses. The concentration and speciation of technetium depends on glass redox and amount of technetium added. Solid crystals of pertechnetate salts were found in the salt cake layer that formed at the top of some glasses during the melt.

LAW glass↗

Fluoropolymer Composites from Partially Perfluoroalkylated Waste Polyethylene

Chemically modified plastics have emerged as practical solutions to plastic waste increases. Here, the inherent novelty of decorating polymer chains with chemical functionality results in distinct properties that expand the available application space. Nevertheless, developing designer materials for specific applications beyond compatibilization or mild property enhancement is difficult due to the synergistic effects of both the polar functionality imparted and the parent materials' intrinsic properties. By incorporating perfluoro-alkyl side-chains onto the backbone of dehydrogenated waste HDPE, unique surface properties intermediate between polytetrafluoroethylene (PTFE, the model fluoropolymer) and HDPE become apparent, while the overall material mechanical and thermal properties result in more LLDPE-like materials. This is demonstrated through moderate decreases in the surface free energy of the perfluoroalkylated polyolefin surface (increase in H 2 O contact angle of ~ 6°) and increased ordering under shear when blended with PTFE nanoparticles where the crossover point occurred at higher strains. Critically, perfluoroalkylated HDPE possesses improved rheological modification properties at elevated temperatures with PTFE nanoparticles, resulting in more thermally robust and stable composite materials.

fluoropolymer↗

Role of Bifunctional Ru/Acid Catalysts in the Selective Hydrocracking of Polyethylene and Polypropylene Waste to Liquid Hydrocarbons

Hydrogenolysis of C–C bonds over Ru-based catalysts has emerged as a deconstruction strategy to convert single-use polyolefin waste to liquid alkanes at relatively mild conditions, but this approach exhibits limitations, including methane formation resulting from terminal C–C bond scission. In this study, a variety of catalysts were investigated for the reductive deconstruction of polyethylene (PE) and polypropylene (PP) to identify supports that promote nonterminal C–C bond scission. We found that Ru nanoparticles supported on Brønsted-acidic zeolites with the faujasite (FAU) and Beta (BEA) topologies were highly active for the cleavage of C–C bonds in PE and PP, exhibiting improved liquid yields and suppressed methane formation. For the deconstruction of PE, supporting ruthenium nanoparticles (5 wt %) on FAU increased the yields of liquid alkanes to 67% compared to 33% over an inert silica support (5 wt % Ru/SiO 2 ) at 200 °C, 16 h, under 30 bar of H2. A dramatic selectivity enhancement toward liquid hydrocarbons was also observed for PP over Ru/FAU and Ru/BEA compared to Ru/SiO 2 . To understand the origin of this selectivity improvement, a combination of ex situ and operando characterization techniques were used to reveal that both catalyst structure and acidity play key roles in PE and PP conversion. Operando X-ray absorption spectroscopy studies with model polyolefins over Ru-supported catalysts with varying acidity levels revealed that the local chemical environment of Ru [0] during the reaction is consistent across multiple acidic supports, although the onset of reduction during synthesis of the nanoparticles varies across different supports. These results, combined with reactivity data, demonstrate the importance of the acid-noble metal cooperativity in promoting selective C–C bond scission toward liquid alkanes that shifts the mechanism from hydrogenolysis to ideal hydrocracking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗