Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Lunar electromagnetic scattering. III - Propagation at arbitrary angles to the cavity axis

An analytic theory is developed for both the steady state and the time-dependent electric and magnetic fields inside the moon and its downstream cavity for interplanetary electromagnetic field fluctuations incident at arbitrary angles to the cavity axis. The moon model has an electrical conductivity, electrical permittivity, and magnetic permeability which vary arbitrarily with radius. The cavity downstream of the moon in the solar wind is assumed to be an infinitely long nonconducting cylinder. If the interplanetary field fluctuations propagate parallel to the cavity, the far cavity field is a single cylindrical transverse electric mode propagating downstream with the same frequency, wavelength, and phase velocity as the interplanetary field. The far cavity field is the result of a forced surface wave on the cylindrical boundary of the void. When the interplanetary fluctuations are incident at an arbitrary angle to the cavity axis, the far cavity field is a superposition of an infinite number of cylindrical TE and TM modes.

Horning, B. L.↗
NASA NTRS1975

Lunar topography and the limb compression source regions

Data from the Apollo 15, 16, and 17 laser altimeters have been used to study slopes, elevations, and roughness in the identifiable regions on the moon which sporadically produce plasma compressions and magnetic-field enhancements in the solar wind/lunar void boundary when those regions are at a flow limb. It is found that occurrence rates for such 'limb compressions' derived from Explorer 35 satellite measurements are significantly correlated with peak, average, and RMS slopes in the source regions, whereas rates derived from Apollo 15 and 16 subsatellite data are not correlated with topography. This suggests that two or more mechanisms operate in the source regions to produce limb compressions. Together with the known correlation between limb compressions and local surface remanent magnetic fields, the results indicate that lunar magnetization is not strongly related to surface features.

Srnka, L. J.↗
NASA NTRS1976

The use of LANDSAT DCS and imagery in reservoir management and operation

The author has identified the following significant results. A graph that shows the snow water equivalent data during the 1975-76 winter season for the Ninemile and Michaud Farms snow pillows located in northern Maine is shown. The Bournes transducers used in the snow pillow interface were tested after field use under controlled laboratory conditions of temperature and pressure. It was found that the temperature calibration curve for the Bournes transducers became erratic below 0 C. On 8-10 August 1976, the remainder of hurricane, Belle, travelled through Vermont, New Hampshire, northern Maine, and on into Canada's Maritime Provinces dumping three inches of rain in many areas. In Canada and Maine, local storms dropped up to two inches during the following week. The Saint John River reached near flood stages at Fort Kent, Maine. During this storm, DCP data were received from Fort Kent, Ninemile Bridge, and Saint Francis River in New Brunswick. Resulting high runoff after these storms was studied in connection with the proposed Dickey-Lincoln School dams to be built in that area, and significantly, it was found that creditable flood hydrographs could be generated from LANDSAT DCP data in spite of the voids caused by the satellite being below the horizon.

Cooper, S.↗
NASA NTRS1976

High voltage design guide for airborne equipment

The report supplies the theoretical background and design techniques needed by an engineer who is designing electrical insulation for high-voltage high-power components, equipment, and systems on aircraft. A literature survey and abundant bibliography identify references that provide further data on the subjects of partial discharges, corona, field theory and plotting, voids and processes for applying insulation. Both gaseous and solid insulations are treated. Cryogenic and liquid design notes are included. Tests and test equipment for high voltage insulation and equipment are defined. Requirements of test plans and procedures for high-voltage high-power equipment are identified and illustrated by examples. Suggestions for high-voltage specifications are provided. Very few of the Military and Government specifications deal with system voltages above 10kv, thus most aircraft high-voltage specifications will have to be derived from the power industry specifications and standards produced by ASTM, IEEE, and NEMA.

W G Dunbar↗
NASA NTRS1977

Ultrasonic evaluation of the strength of unidirectional graphite-polyimide composites

An acoustic-ultrasonic method is described that was successful in ranking unidirectional graphite-polyimide composite specimens according to variations in interlaminar shear strength. Using this method, a quantity termed the stress wave factor was determined. It was found that this factor increases directly with interlaminar shear strength. The key variables in this investigation were composite density, fiber weight fraction, and void content. The stress wave factor and other ultrasonic factors that were studied were found to provide a powerful means for nondestructive evaluation of mechanical strength properties.

Vary, A.↗
NASA NTRS1977

Measurement of insulation integrity of IUE camera tube facsimiles by partial discharges method and diffusion of gases through various silicone rubbers

Several dummy tubes imitating the IUE Camera System design were encapsulated with Solithane 2, Conathane EN-11, Green and Black Hysols and SMRD 432. Various flaws were purposefully placed in some of these. Partial discharge testing in vacuum under direct voltage conditions was carried once a week for 12 weeks, 15 kv dc being applied during normal working hours for 40 hours duration per week. None of the units showed much damage during this time judging by the P.D. energy histograms. A more complete mathematical presentation is given on diffusion and permeation than previously. Measurements of diffusion constants for various silicone rubbers are carried out by the Time-Lag method and compared to other determinations in the literature. Calculations of the time required for diffusion through a thick wall are demonstrated in the long time approximation and for dimensions pertaining to void and wall sizes of a delamination problem in the LANDSAT-C vidicon tubes. An actual delaminated LANDSAT-C tube and some facsimiles are immersed in vacuum for long periods and tested for catastrophic breakdown due to diffusion of gas, by application of high voltage.

Bever, R. S.↗
NASA NTRS1977

Bimetallic junctions

The formation of voids through interdiffusion in bimetallic welded structures exposed to high operating temperatures is inhibited by utilizing an alloy of the parent materials in the junction of the parent materials or by preannealing the junction at an ultrahigh temperature. These methods are also used to reduce the concentration gradient of a hardening agent.

Arcella, F. G.↗
NASA NTRS1977

The interaction of bubbles with solidification interfaces

The behavior of bubbles at a dendritic solidification interface was studied during the coasting phase of a sounding rocket flight. Sequential photographs of the gradient freeze experiment showed nucleation, growth and coalescence of bubbles at the moving interface during both the low-gravity and one-gravity tests. In the one-gravity test the bubbles were observed to detach from the interface and float to the top of the melt. However, in the low-gravity tests no bubble detachment from the interface or steady state bubble motion occurred and large voids were grown into the crystal. These observations are discussed in terms of the current theory of thermal migration of bubbles and in terms of their implications on the space processing of metals.

Papazian, J. M.↗
NASA NTRS1977

Poly /Diels-Alder/ matrix resins

A poly (Diels-Alder) (PDA) resin approach was investigated as a means to achieve autoclavability of high-temperature resistant resin/fiber composites under mild fabrication conditions. The results of the study were highly promising and program objectives were achieved. Low-void content Type A-S graphite reinforced composites were autoclave fabricated from a PDA resin/fiber prepreg prepared from an acetone:methanol:dioxane varnish. Autoclave conditions were 400 F and 100 psi for up to two hours duration. After postcure at temperatures up to 600 F, the composites demonstrated high initial mechanical properties at temperatures up to 550 F. The results from isothermal aging studies in air for 1000 hours indicated potential for long-term (over 1000 hours) use at 500 F and shorter-term use at 550 F.

Jones, R. J.↗
NASA NTRS1977

Development of a low temperature phase change material package

Test data obtained for a low temperature phase change material (PCM) canisters are presented. The canister was designed to provide up to 30 w-hrs of storage capacity at approximately -90 C with an overall thermal conductance which is greater than 8 w/deg C. N-heptane which is an n-paraffin and has a -90.6 C freezing point was used as the working fluid. The canister was fabricated from aluminum and has an aluminum honeycomb core. Its void volume permits service temperatures up to 70 C. Results obtained from component and system's tests indicate well defined melting and freezing points which are repeatable and within 1 C of each other. Subcooling effects are less than 0.5 C and are essentially negligible. Measured storage capacities are within 94 to 88% the theoretical.

Brennan, P. J.↗
NASA NTRS1978

High-rise foam-in-place process

Large polyurethane parts are molded by sequential pouring without waiting for foam to cure. Joints between pours and tops of parts are free of voids and need no trimming.

Liskay, G. G.↗
NASA NTRS1978

Friction of thick laminates

Technique which improves fiber alignment and reduces void content of thick laminated structures is readily applicable to structures that contain sections such as ribs, channels, or bosses joined to thin stems of same material.

Dickerson, G. E.↗
NASA NTRS1979

Deaerating high-viscosity silicon rubber

Method utilizing a modified hand operated centrifuge is used to deaerate high velocity (6,000 poise) silicon rubber for economical production of void-free silicon rubber seals.

Gabriel, R. W.↗
NASA NTRS1977

Plasma distribution and spacecraft charging modeling near Jupiter

To assess the role of spacecraft charging near Jupiter, the plasma distribution in Jupiter's magnetosphere was modeled using data from the plasma analyzer experiments on Pioneer 10 (published results) and on Pioneer 11 (preliminary results). In the model, electron temperatures are kT = 4 eV throughout, whereas proton temperatures range over 100 or equal to kT or equal to 400 eV. The model fluxes and concentrations vary over three orders of magnitude among several corotating regions, including, in order to increasing distance from Jupiter, a plasma void, plasma sphere, sporadic zone, ring current, current sheet, high latitude plasma and magnetosheath. Intermediate and high energy electrons and protons (to 100 MeV) are modeled as well. The models supply the information for calculating particle fluxes to a spacecraft in the Jovian environment. The particle balance equations (including effects of secondary and photoemission) then determine the spacecraft potential.

Goldstein, R.↗
NASA NTRS1978

Solventless LARC-160 Polyimide Matrix Resin

The addition polyimide, LARC-160, which was originally synthesized from low cost liquid monomers as a laminating resin in ethanol, was prepared as a solventless, high viscosity, neat liquid resin. The resin was processed by hot-melt coating techniques into graphite prepreg with excellent tack and drape. Comparable data on graphite reinforced laminates made from solvent-coated and various hot-melt coated prepreg were generated. LARC-160, because of its liquid nature, can be easily autoclave processed to produce low void laminates. Liquid chromatographic fingerprints indicate good reaction control on resin scale ups. Minor changes in monomer ratios were also made to improve the thermal aging performance of graphite laminates.

Stclair, T. L.↗
NASA NTRS1977

Spacecraft disinfectant/cleansing agent development

The sanitation agent container, which was selected in a trade off study, employs two chambers, a rigid outer container and an inner flexible bladder. The bladder contains the sanitation agent formulation and its release is controlled by a manually operated valve. The outer container holds a high pressure vapor. There is no void in the bladder which makes the package operation independent of orientation and therefore usable in zero gravity. Foam is developed by a low boiling point fluid or dissolved in the product. When the product is dispensed at atmospheric presure, the evolved gas or vapor whips up a goam in the valve. The sanitation agents were initially formulated with freons which produces an excellent foam. However freon is incompatible with the life support system and was replaced with carbon dioxide dissolved at high pressure. The CO2 system may limit high temperature exposure to prevent leakage or package distortion. The sanitation agents have been shown to be effective in cleaning soils from personnel and material.

Abbate, M.↗
NASA NTRS1978

Fiber reinforced PMR polyimide composites

Commercially obtained PMR-15 polyimide prepregs with S-glass and graphite fiber reinforcements were evaluated along with in-house prepared glass and graphite cloth PMR 2 materials. A novel autoclave approach was conceived and used to demonstrate that both the PMR systems respond to 1.4 MPa (200 psi) autoclave pressures to produce void free composites equivalent to die molded laminates. Isothermal gravimetric analysis and subsequent mechanical property tests indicated that the PMR 2 system was significantly superior in thermo-oxidative stability, and that S-glass reinforcements may contribute to the accelerated degradation of composites at 316 C (600 F) when compared to graphite fiber reinforced composites. Fully reversed bending fatigue experiments were conducted with a type of fixture unused for organic matrix composites. These studies indicated that the graphite fiber composites were clearly superior in fatigue resistance to the glass fiber reinforced material and that PMR matrix composite systems yield performance of the same order as composite materials employing other families of matrices.

Cavano, P. J.↗