Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Visualization research”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Models of Wake-Vortex Spreading Mechanisms and Their Estimated Uncertainties

One of the primary constraints on the capacity of the nation's air transportation system is the landing capacity at its busiest airports. Many airports with nearly-simultaneous operations on closely-spaced parallel runways (i.e., as close as 750 ft (246m)) suffer a severe decrease in runway acceptance rate when weather conditions do not allow full utilization. The objective of a research program at NASA Ames Research Center is to develop the technologies needed for traffic management in the airport environment so that operations now allowed on closely-spaced parallel runways under Visual Meteorological Conditions can also be carried out under Instrument Meteorological Conditions. As part of this overall research objective, the study reported here has developed improved models for the various aerodynamic mechanisms that spread and transport wake vortices. The purpose of the study is to continue the development of relationships that increase the accuracy of estimates for the along-trail separation distances available before the vortex wake of a leading aircraft intrudes into the airspace of a following aircraft. Details of the models used and their uncertainties are presented in the appendices to the paper. Suggestions are made as to the theoretical and experimental research needed to increase the accuracy of and confidence level in the models presented and instrumentation required or more precise estimates of the motion and spread of vortex wakes. The improved wake models indicate that, if the following aircraft is upwind of the leading aircraft, the vortex wakes of the leading aircraft will not intrude into the airspace of the following aircraft for about 7s (based on pessimistic assumptions) for most atmospheric conditions. The wake-spreading models also indicate that longer time intervals before wake intrusion are available when atmospheric turbulence levels are mild or moderate. However, if the estimates for those time intervals are to be reliable, further study is necessary to develop the instrumentation and procedures needed to accurately define when the more benign atmospheric conditions exist.

Rossow, Vernon J.↗
NASA NTRS1982

AgRISTARS. Supporting research: Algorithms for scene modelling

The requirements for a comprehensive analysis of LANDSAT or other visual data scenes are defined. The development of a general model of a scene and a computer algorithm for finding the particular model for a given scene is discussed. The modelling system includes a boundary analysis subsystem, which detects all the boundaries and lines in the image and builds a boundary graph; a continuous variation analysis subsystem, which finds gradual variations not well approximated by a boundary structure; and a miscellaneous features analysis, which includes texture, line parallelism, etc. The noise reduction capabilities of this method and its use in image rectification and registration are discussed.

Rassbach, M. E.↗
NASA NTRS1994

Applied virtual reality at the Research Triangle Institute

Virtual Reality (VR) is a way for humans to use computers in visualizing, manipulating and interacting with large geometric data bases. This paper describes a VR infrastructure and its application to marketing, modeling, architectural walk through, and training problems. VR integration techniques used in these applications are based on a uniform approach which promotes portability and reusability of developed modules. For each problem, a 3D object data base is created using data captured by hand or electronically. The object's realism is enhanced through either procedural or photo textures. The virtual environment is created and populated with the data base using software tools which also support interactions with and immersivity in the environment. These capabilities are augmented by other sensory channels such as voice recognition, 3D sound, and tracking. Four applications are presented: a virtual furniture showroom, virtual reality models of the North Carolina Global TransPark, a walk through the Dresden Fraunenkirche, and the maintenance training simulator for the National Guard.

Montoya, R. Jorge↗
NASA NTRS1994

Virtual Environments in Scientific Visualization

Virtual environment technology is a new way of approaching the interface between computers and humans. Emphasizing display and user control that conforms to the user's natural ways of perceiving and thinking about space, virtual environment technologies enhance the ability to perceive and interact with computer generated graphic information. This enhancement potentially has a major effect on the field of scientific visualization. Current examples of this technology include the Virtual Windtunnel being developed at NASA Ames Research Center. Other major institutions such as the National Center for Supercomputing Applications and SRI International are also exploring this technology. This talk will be describe several implementations of virtual environments for use in scientific visualization. Examples include the visualization of unsteady fluid flows (the virtual windtunnel), the visualization of geodesics in curved spacetime, surface manipulation, and examples developed at various laboratories.

Bryson, Steve↗
NASA NTRS1994

Virtual Environments in Scientific Visualization

Virtual environment technology is a new way of approaching the interface between computers and humans. Emphasizing display and user control that conforms to the user's natural ways of perceiving and thinking about space, virtual environment technologies enhance the ability to perceive and interact with computer generated graphic information. This enhancement potentially has a major effect on the field of scientific visualization. Current examples of this technology include the Virtual Windtunnel being developed at NASA Ames Research Center. Other major institutions such as the National Center for Supercomputing Applications and SRI International are also exploring this technology. This talk will be describe several implementations of virtual environments for use in scientific visualization. Examples include the visualization of unsteady fluid flows (the virtual windtunnel), the visualization of geodesics in curved spacetime, surface manipulation, and examples developed at various laboratories.

Bryson, Steve↗
NASA NTRS1999

Visual-vestibular integration as a function of adaptation to space flight and return to Earth

Research on perception and control of self-orientation and self-motion addresses interactions between action and perception . Self-orientation and self-motion, and the perception of that orientation and motion are required for and modified by goal-directed action. Detailed Supplementary Objective (DSO) 604 Operational Investigation-3 (OI-3) was designed to investigate the integrated coordination of head and eye movements within a structured environment where perception could modify responses and where response could be compensatory for perception. A full understanding of this coordination required definition of spatial orientation models for the microgravity environment encountered during spaceflight.

Reschke, Millard R.↗
NASA NTRSDate not supplied

A Newly Developing Community-Oriented Data System from NASA GES DISC

Data services are essential to facilitate data access and to aid efficiency of conducting research and application activities. With emerging technologies such as cloud computing and AI/ML (Artificial Intelligence/Machine Learning) leading the pace of the data world, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), home to the permanent archive for multidisciplinary Earth Observation (EO) geospatial data to study atmospheric composition, weather and climate variability, and water and energy cycles is no exception.Interfacing directly with users as part of data center work, we understand the challenges for the required time and effort to discover, visualize, and analyze large varieties and quantities of Earth Observation information for research, monitoring, and decision-making, largely due to the existing data and information systems aim to support experienced users, but has been proved difficult for non-earth scientists and new users that are unfamiliar with the variety of formats and structures in which data, metadata, and information are stored, as well as the required methods to use them. To address these challenges, I will update our latest activities with regard to water-and energy-related products and community-oriented and user-friendly services at the GES DISC, including our plans for the emerging technologies.

Jennifer Wei↗
NASA NTRS1999

Intelligent Command and Control Systems for Satellite Ground Operations

This grant, Intelligent Command and Control Systems for Satellite Ground Operations, funded by NASA Goddard Space Flight Center, has spanned almost a decade. During this time, it has supported a broad range of research addressing the changing needs of NASA operations. It is important to note that many of NASA's evolving needs, for example, use of automation to drastically reduce (e.g., 70%) operations costs, are similar requirements in both government and private sectors. Initially the research addressed the appropriate use of emerging and inexpensive computational technologies, such as X Windows, graphics, and color, together with COTS (commercial-off-the-shelf) hardware and software such as standard Unix workstations to re-engineer satellite operations centers. The first phase of research supported by this grant explored the development of principled design methodologies to make effective use of emerging and inexpensive technologies. The ultimate performance measures for new designs were whether or not they increased system effectiveness while decreasing costs. GT-MOCA (The Georgia Tech Mission Operations Cooperative Associate) and GT-VITA (Georgia Tech Visual and Inspectable Tutor and Assistant), whose latter stages were supported by this research, explored model-based design of collaborative operations teams and the design of intelligent tutoring systems, respectively. Implemented in proof-of-concept form for satellite operations, empirical evaluations of both, using satellite operators for the former and personnel involved in satellite control operations for the latter, demonstrated unequivocally the feasibility and effectiveness of the proposed modeling and design strategy underlying both research efforts. The proof-of-concept implementation of GT-MOCA showed that the methodology could specify software requirements that enabled a human-computer operations team to perform without any significant performance differences from the standard two-person satellite operations team. GT-VITA, using the same underlying methodology, the operator function model (OFM), and its computational implementation, OFMspert, successfully taught satellite control knowledge required by flight operations team members. The tutor structured knowledge in three ways: declarative knowledge (e.g., What is this? What does it do?), procedural knowledge, and operational skill. Operational skill is essential in real-time operations. It combines the two former knowledge types, assisting a student to use them effectively in a dynamic, multi-tasking, real-time operations environment. A high-fidelity simulator of the operator interface to the ground control system, including an almost full replication of both the human-computer interface and human interaction with the dynamic system, was used in the GT-MOCA and GT-VITA evaluations. The GT-VITA empirical evaluation, conducted with a range of'novices' that included GSFC operations management, GSFC operations software developers, and new flight operations team members, demonstrated that GT-VITA effectively taught a wide range of knowledge in a succinct and engaging manner.

Mitchell, Christine M.↗
NASA NTRS2019

Evaluation of a Head-Worn Display with Ambient Vision Cues for Unusual Attitude Recovery

A Commercial Aviation Safety Team (CAST) study of 18 loss-of-control events determined that a lack of external visual references was a contributing factor in 17 of these events. CAST recommended that manufacturers should develop and implement virtual day-VMC display systems, such as synthetic vision (SV) or equivalent systems (CAST Safety Enhancement, SE-200). In support of this recommended action, CAST has requested studies to define minimum requirements for virtual day-visual meteorological conditions (VMC) displays to improve flight crew awareness of airplane attitude. NASA’s research in Virtual day-VMC displays, known as synthetic vision systems, are intended to support intuitive flight crew attitude awareness similar to a day-VMC-like environment, especially if they could be designed to create visual dominance. A study was conducted to evaluate the utility of ambient vision (AV) cues paired with virtual Head-Up Display (HUD) symbology on a prototype head-worn display (HWD) during recovery from unusual attitudes in a simulated environment. The virtual-HUD component meets the requirement that the HWD may be used as an equivalent display to the HUD. The presence of AV cueing leverages the potential that a HWD has over the HUD for spatial disorientation prevention. The simulation study was conducted as a single-pilot operation, under realistic flight scenarios, with off-nominal events occurring that were capable of inducing unusual attitudes. Independent variables of the experiment included: 1) AV capability (on vs off) 2) AV display opaqueness (transparent vs opaque) and display location (HWD vs traditional head- down displays); AV cues were only present when the HWD was being worn by the subject pilot.

Nicholas, Stephanie N.↗
NASA NTRS1977

Simulation replay - Implementation and flight simulation applications

Throughout the aircraft development process flight simulators are used to evaluate design concepts, 'handling' qualities, and operational procedures. A modern flight research simulator comprises a cockpit equipped with flight instruments and controls, subsystems to provide visual, motion, and other flight cues, and a digital computer. REPLAY is a computer program which enables a user to reproduce the multidimensional flight cues for an entire simulation 'run'. Attention is given to simulation fidelity improvement, simulation data recovery, simulation quality assurance, and aircraft systems research. It is pointed out that each of the applications discussed supports aircraft systems research by improving the realism, efficiency, or reliability of the simulation facility.

Crane, D. F.↗
NASA NTRS2017

Collaborative Data Publication Utilizing the Open Data Repository's (ODR) Data Publisher

Introduction: For small communities in diverse fields such as astrobiology, publishing and sharing data can be a difficult challenge. While large, homogenous fields often have repositories and existing data standards, small groups of independent researchers have few options for publishing standards and data that can be utilized within their community. In conjunction with teams at NASA Ames and the University of Arizona, the Open Data Repository's (ODR) Data Publisher has been conducting ongoing pilots to assess the needs of diverse research groups and to develop software to allow them to publish and share their data collaboratively. Objectives: The ODR's Data Publisher aims to provide an easy-to-use and implement software tool that will allow researchers to create and publish database templates and related data. The end product will facilitate both human-readable interfaces (web-based with embedded images, files, and charts) and machine-readable interfaces utilizing semantic standards. Characteristics: The Data Publisher software runs on the standard LAMP (Linux, Apache, MySQL, PHP) stack to provide the widest server base available. The software is based on Symfony (www.symfony.com) which provides a robust framework for creating extensible, object-oriented software in PHP. The software interface consists of a template designer where individual or master database templates can be created. A master database template can be shared by many researchers to provide a common metadata standard that will set a compatibility standard for all derivative databases. Individual researchers can then extend their instance of the template with custom fields, file storage, or visualizations that may be unique to their studies. This allows groups to create compatible databases for data discovery and sharing purposes while still providing the flexibility needed to meet the needs of scientists in rapidly evolving areas of research. Research: As part of this effort, a number of ongoing pilot and test projects are currently in progress. The Astrobiology Habitable Environments Database Working Group is developing a shared database standard using the ODR's Data Publisher and has a number of example databases where astrobiology data are shared. Soon these databases will be integrated via the template-based standard. Work with this group helps determine what data researchers in these diverse fields need to share and archive. Additionally, this pilot helps determine what standards are viable for sharing these types of data from internally developed standards to existing open standards such as the Dublin Core (http://dublincore.org) and Darwin Core (http://rs.twdg.org) metadata standards. Further studies are ongoing with the University of Arizona Department of Geosciences where a number of mineralogy databases are being constructed within the ODR Data Publisher system. Conclusions: Through the ongoing pilots and discussions with individual researchers and small research teams, a definition of the tools desired by these groups is coming into focus. As the software development moves forward, the goal is to meet the publication and collaboration needs of these scientists in an unobtrusive and functional way.

easy to use and implement software tool↗
NASA NTRS2022

Flow Visualization to Complement Modern Wing Tunnel Testing

In recent times, wind tunnel testing at the NASA Ames Unitary Plan Wind Tunnel (UPWT) seeks to validate computational fluid dynamics (CFD) tools. To that end, we find that now more than ever, flow visualization is a powerful capability that provides context to the experimental results bringing real-time insight to the researcher. It enables us to answer questions like: “Why does this drag polar look different?” or “What is the source of this tone in the microphone data?”. Flow visualization can verify that assumptions made in the CFD model are correct, addressing questions like: “Are our trip dots the correct size and location?” or “Does the position of this shock match our prediction?”. Techniques such as infrared flow visualization and schlieren / shadowgraph are powerful capabilities that when taken together can provide results as to the nature of the fluid structure interaction at a test condition in a format that pairs well with computational results. When properly integrated these measurements can be taken with no impact on the productivity of the test program, supplementing traditional measurements and often discovering something unforeseen, helping the researcher to answer those slippery aerodynamic questions and ultimately build confidence in the accuracy of a model.

wind tunnel↗
NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗
NASA NTRSDate not supplied

Transition Measurements on the SWiFT Model in the National Transonic Facility

Boundary layer transition locations on the Swept Wing Flow Test (SWiFT) Hybrid Wing Body model were measured in the National Transonic Facility (NTF) at the NASA Langley Research Center using several different methods. These methods include sublimating chemical flow visualization for a limited number of low Reynolds number conditions, as well as mean static pressure and dynamic pressure measurements. Results are presented for a range of conditions in the NTF, demonstrating Mach and Reynolds number effects. The transition front locations obtained from the different techniques agree well. A variation of the static pressure transition detection method is described in which continuous angle of attack polars are performed. This approach enables detection of the transition front at more challenging (high Reynolds number) conditions than is possible with sparser data from pitch-pause angle-of-attack polars. The trip dot effectiveness is also verified using all of the available diagnostics. Additionally, low Reynolds number results are compared with those acquired on the same model at the Aircraft Research Association (ARA) facility, and these results show good agreement overall, suggesting similar freestream flow quality conditions of the two facilities.

National Transonic Facility↗
NASA NTRS2003

Procedure Visualization to Augment Space Mission Training

The Intelligent Virtual Station (IVS) has been developed by the Smart Systems Research Laboratory at the NASA Ames Research Center as a solution to some of the training and operations challenges faced by organizations like the International Space Station training facilities and Mission Control engineering teams. At present, astronaut crews are constrained by limited access to physical mockups, which themselves have a built-in 1-g limitation. Mission operations team are faced with the daunting task of controlling the operations and maintenance of an ever-changing Station in space. Many operations teams create and follow textual procedures without the ability to visualize the given actions or alternatives. The NS allows users to easily generate and view procedures to enhance training and operations. Because training and mission operations are of crucial importance to the International Space Station and other similarly sophisticated programs, this paper is focused on the NS integrated procedure tool.

McIntosh, Dawn M.↗
NASA NTRS1970

Optics at the Lewis Research Center

Lewis Research Center applications of optics to research in flight propulsion and space power generation, discussing gas density visualization, radiative heat transfer, etc

Buchele, D. R.↗
NASA NTRS1977

Recent ground-based and in-flight simulator studies of low-speed handling characteristics of supersonic cruise transport aircraft

Several advanced arrow-wing concepts have evolved from NASA's Supersonic Cruise Aircraft Research (SCAR) Program. Evaluations of the low-speed handling characteristics of these configurations have been conducted at Langley Research Center using a fixed-base ground simulator with a visual landing scene. A brief in-flight simulation program was also conducted using Calspan's Total In-Flight Simulator (TIFS) in order to provide: (1) points of reference for interpretation of the ground-simulator results, (2) data for control-system design tradeoffs, and (3) data on effects of real-world visual height cues and cockpit-motion cues not available in the fixed-base simulation. The more significant results of these studies are presented.

Grantham, W. D.↗
NASA NTRS1982

Research through simulation

The design of the computer operating system at Langley Research Center allows for concurrent support of time-critical simulations and background analytical computing on the same machine. Signal path interconnections between computing hardware and flight simulation hardware is provided to allow up to six simulation programs to be in operation at one time. Capabilities and research applications are discussed for the: (1) differential maneuvering simulator; (2) visual motion simulator; (3) terminal configured vehicle simulator; (4) general aviation aircraft simulator; (5) general purpose fixed based simulator; (6) transport simulator; (7) digital fly by wire simulator; (8) general purpose fighter simulator; and (9) the roll-up cockpit. The visual landing display system and graphics display system are described and their simulator support applications are listed.

Copeland, J. L.↗