SEARCH · Engineering Papers

Results for “Vibrational states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

NASA NTRS1996

Deformation of Fluid Column by Action of Axial Vibration and Some Aspects of High-Rate Thermocapillary Convection

The deformation of the fluid column by an action of a low-frequency vibration is considered. It is shown that behavior of the free fluid surface depends on the frequency of applied vibration and its amplitude. In the area of very low frequencies when fluid has time to comment on travel of bounding solid walls limiting column, the harmonical oscillations of free surface with given frequency are observed. With increase of vibration frequency the steady-state relief on free fluid surface is formed. If the amplitude of vibration is very small and the frequency corresponding to the first peak in the vibration spectrum on the Mir orbital station, the deformation of free surface tends to zero. Fluid flow induced thermocapillary effect on deformed free surface is more unstable as in the case of smooth cylindrical surface. It was shown that width of heating zone affects very essentially the flow pattern and transition to oscillatory regime of thermocapillary convection.

Feonychev, Alexander I.↗

NASA NTRS1993

Ab initio calculation of a global potential, vibrational energies, and wave functions for HCN/HNC, and a simulation of the (A-tilde)-(X-tilde) emission spectrum

A potential energy surface for the HCN/HNC system which is a fit to extensive, high-quality ab initio, coupled-cluster calculations is presented. All HCN and HNC states with energies below the energy of the first delocalized state are reported and characterized. Vibrational transition energies are compared with all available experimental data on HCN and HNC, including high CH-overtone states up to 23,063/cm. A simulation of the (A-tilde)-(X-tilde) stimulated emission pumping (SEP) spectrum is also reported, and the results are compared to experiment. Franck-Condon factors are reported for odd bending states of HCN, with one quantum of vibrational angular momentum, in order to compare with the recent assignment by Jonas et al. (1992), on the basis of axis-switching arguments of a number of previously unassigned states in the SEP spectrum.

Bowman, Joel M.↗

DOE OSTI2023

Bridge-Mediated Metal-to-Metal Electron and Hole Transfer in a Supermolecular Dinuclear Complex: A Computational Study Using Quantum Electron–Nuclear Dynamics

Bimetallic electron donor–acceptor complexes can facilitate electron and energy transfer with excellent structural control through synthetic design. In this work, we investigate the photochemical dynamics in a Ru–Cu bimetallic complex after photoexcitation of the Ru-centered charge transfer state. The physical underpinnings of the metal-to-metal directional charge transfer process are unraveled via analyses of the quantum electronic dynamics and electron–nuclear trajectories. Here, the effects of molecular vibrations in the photoexcited state on the charge transfer processes are also analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1986

Dipole moments and transition probabilities of the a 3Sigma(+)g - b 3Sigma(+)u system of molecular hydrogen

Multiconfiguration variational calculations of the electronic wave functions of the a 3Sigma(+)g and b 3Sigma(+)u states of molecular hydrogen are presented, and the electric dipole transition moment between them (of interest in connection with stellar atmospheres and the UV spectrum of the Jovian planets) is obtained. The dipole moment is used to calculate the probabilities of radiative transitions from the discrete vibrational levels of the a 3Sigma(+)g state to the vibrational continuum of the repulsive b 3Sigma(+)u state as functions of the wavelength of the emitted photons. The total transition probabilities and radiative lifetimes of the levels v prime = 0-20 are presented.

Guberman, S.↗

DOE OSTI2020

9 Li($\textit{d,p}$) reaction as a specific probe of 10 Li, the paradigm of parity-inverted nuclei around the $\textit{N}$ = 6 closed shell

In this work, we show, within the framework of renormalized nuclear field theory and of the induced reaction surrogate formalism, that the highly debated 10 Li structure, studied in a recent high statistics 9 Li ($\textit{d,p}$) 10 Li one-neutron transfer experiment, is consistent with, or better, requires, the presence of a virtual 1/2 + state of similar single-particle strength than that of the 1/2 – resonance at 0.45 ± 0.03 MeV. Based on continuum spectroscopy self-energy techniques, we find that the physical mechanism responsible for parity inversion in $^{10}_3$Li is the same as that at the basis of the similar phenomenon observed in $^{11}_4$Be and as that needed in 11 Li to have an important $\textit{s}$-wave ground-state component. In particular the strong dynamical coupling between the $s_{1/2}$ and the $d_{5/2}$ states, mediated by the quadrupole vibration of the core 9 Li. A phenomenon which also affects the strength distribution of the $d_{5/2}$ state, in particular, in the energy range of 3–4.5 MeV. Furthermore, this mechanism is also consistent with the (normal) sequence of the $1_{p_{1/2}}$ and $2_{s_{1/2}}$ levels in the $\textit{N}$ = 7 isotones $^{12}_5$B and $^{13}_6$C. The main aim of the present Rapid Communication is that of treating structure and reactions on equal footing and in a common language. In other words, the calculation of the 9 Li ($\textit{d,p}$) 10 Li reaction as a single conceptual step from individual single-particle motion and collective vibrations to absolute double differential cross sections of renormalized virtual and resonant final states, which can be directly compared with experiment.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Complete collision data set for electrons scattering on molecular hydrogen and its isotopologues: I. Fully vibrationally-resolved electronic excitation of H 2 $X^1Σ^+_g)$

Here, we present a comprehensive set of vibrationally-resolved cross sections for electron-impact electronic excitation of molecular hydrogen suitable for implementation in collisional-radiative models. The adiabatic-nuclei molecular convergent close-coupling method is used to calculate cross sections for excitation of all bound vibrational levels and dissociative excitation of the B 1 Σ u + , C 1 Π u , E F 1 Σ g + , B ′ 1 Σ u + , G K 1 Σ g + , I 1 Π g , J 1 Δ g , D 1 Π u , H 1 Σ g + , b 3 Σ u + , c 3 Π u , a 3 Σ g + , e 3 Σ u + , d 3 Π u , h 3 Σ g + , g 3 Σ g + , i 3 Π g , and j 3 Δ g electronic states from all –14 bound vibrational levels of the ground electronic ($\text{X}$ $^1&#x3A3^+_g$) state. The data set consists of cross sections from threshold to 500 eV for over 5000 transitions, representing all possible electronic and vibrational transitions between the state and the –3 singlet and triplet states (where refers to the united-atoms-limit principle quantum number). The cross sections are presented in graphical form and provided as both numerical values and analytic fit functions in supplementary data files.

74 ATOMIC AND MOLECULAR PHYSICS↗

NASA NTRS1974

Vibration and recoil control of pneumatic hammers

Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.

Constantinescu, I. N.↗

NASA NTRS1990

Theoretical study of the spectroscopy of NO(+)

The spectroscopy of the NO(+) molecule has been studied using multireference configuration-interaction calculations. The peak at 21.7 eV in the photoelectron spectrum of NO is assigned to the (2) 3Pi state (c 3Pi) and the vibrational progression centered at 23.1 eV is assigned to the diabatic (3) 1Pi state (B 1Pi). Several additional bound states with binding energies in excess of 1 eV are characterized in the present work. Radiative lifetimes are presented for many of the states.

Partridge, Harry↗

NASA NTRS1967

Forced sound propagation induced by a fractionally accommodating piston.

Steady state forced sound propagation in semiinfinite gas induced by oscillating plane piston reflecting particles with Maxwellian distribution

SOUND PROPAGATION↗

NASA NTRS1990

A comparison of internal energy calculation methods for diatomic molecules

Various methods of calculating the internal energy of diatomic molecules are studied. An accurate and efficient method for computing the eigenvalues of the vibrational Schroedinger equation for an arbitrary potential is developed. The method is based on a finite-element discretization using the cubic Lobatto element. A combination of spectrum slicing and the Laguerre algorithm is used to solve for the eigenvalues. A simple method to compute the quasi-bound states is presented. For N2 molecules, all vibrational-rotational states of eleven available electronic potentials are computed, and summed to obtain the exact internal energy function with temperature. The total computation required 314 seconds of CPU-time on NASA's Cray 2 computer. Various approximate models are discussed and compared with the exact numerical simulation. It is shown that the splitting of the macroscopic internal energy into separate electronic, rotational, and vibrational energies is not justified at high temperatures.

Liu, Yen↗

NASA NTRS1983

Electron impact excitation from a 1 Delta g state of molecular oxygen

First measurements of electron impact excitation on the O2 a delta-one sub g metastable state to a higher bound state, pi-one sub u, is reported. The data were taken at an incident electron energy of 500 eV and scattering angles of 0 deg to 15 deg. A superelastic electron scattering experiment was performed on the pure oxygen target gas in order to establish the composition of the discharged oxygen and to confirm the existence of delta-one sub g molecules in the interaction region. The electron-impact energy loss spectrum obtained is shown. The electronic assignment of the upper state which produces the vibrational structure was determined to be pi-one sub u by examining the potential energy curves of O2 and applying the electric dipole selection rules. The relative line intensities were obtained and used to determine the Morse potential for the pi-one sub u state.

Khakoo, M. A.↗

NASA NTRS1996

Observation of Vibrational Relaxation Dynamics in X(sup 3)Sigma(sup -)(sub g) Oxygen Following Stimulated Raman Excitation to the v=1 Level: Implications for the RELIEF Flow Tagging Technique

The vibrational relaxation of ground-state molecular oxygen (O2, X(sup 3)Sigma(sup -)(sub g)) has been observed, following stimulated Raman excitation to the first excited vibrational level (v=1). Time delayed laser-induced fluorescence probing of the ro-vibrational population distribution was used to examine the temporal relaxation behavior. In the presence of water vapor, the relaxation process is rapid, and is dominated by near-resonant vibrational energy exchange between the v=1 level of O2 and the n2 bending mode of H2O. In the absence of H2O, reequilibration proceeds via homogeneous vibrational energy transfer, in which a collision between two v=1 O2 molecules leaves one molecule in the v=2 state and the other in the v=0 state. Subsequent collisions between molecules in v=1 and v>1 result in continued transfer of population up the vibrational ladder. The implications of these results for the RELIEF flow tagging technique are discussed.

Diskin, Glenn S.↗

DOE OSTI2020

Spatially dependent H-bond dynamics at interfaces of water/biomimetic self-assembled lattice materials

Significance It is challenging to develop biomimetic lattice self-assemblies because such materials need to resemble the flexibility and crystallinity of their biological analog. We show that these materials exhibit unique micro- and mesoscopic-ordered ultrafast hydrogen-bond dynamics, which could be a key feature in the lattice self-assembly: the ultrafast dynamics ensure flexibility, whereas the domain-level ordering reflects crystallinity. This scientific insight cannot be revealed without the ultrafast transient vibrational sum-frequency generation microscope, which integrates ultrafast interfacial spectroscopy with interfacial molecular vibrational imaging––a state-of-the-art development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1977

The influence of molecular rotation on vibration-translation energy transfer

A three-dimensional vibration-rotation collision model is formulated within a semiclassical framework to study the effect of coupled rotational motion on the rate of vibrational energy transfer for collisions between anharmonic diatomic molecules and structureless atoms. Emphasis is on the net rates of vibrational energy transfer summed over all final rotational states rather than those for individual vibration-rotation transitions. The corresponding three-dimensional rate parameters are cast into forms that may be identified with equivalent parameters associated with the collinear approximation. Their comparisons allow the validity of a collinear model to be evaluated and some constraints on its application to be implied. The mechanisms of vibrational energy transfer including rotational transitions are shown to be separable into three classes which are identified and discussed

Mckenzie, R. L.↗

DOE OSTI2023

Methods for the Automated Determination of Sustained Maximum Amplitudes in Oscillating Signals

Machine condition monitoring has been proven to reduce machine downtime and increase productivity. The state-of-the-art research uses vibration monitoring for tasks such as maintenance and tool wear prediction. A less explored aspect is how vibration monitoring might be used to monitor equipment sensitive to vibration. In a manufacturing environment, one example of where this might be needed is in monitoring the vibration of optical linear encoders used in high-precision machine tools and coordinate measuring machines. Monitoring the vibration of sensitive equipment presents a unique case for vibration monitoring because an accurate calculation of the maximum sustained vibration is needed, as opposed to extracting trends from the data. To do this, techniques for determining sustained peaks in vibration signals are needed. Here, this work fills this gap by formalizing and testing methods for determining sustained vibration amplitudes. The methods are tested on simulated signals based on experimental data. Results show that processing the signal directly with the novel Expire Timer method produces the smallest amounts of error on average under various test conditions. Additionally, this method can operate in real-time on streaming vibration data.

Industrial Internet of Things↗

NASA NTRS1983

Theoretical studies of solar-pumped lasers

Metallic vapor lasers of Na2 and Li2 are examined as solar energy converters. The absorbed photons cause transitions to vibrational-rotational levels in an upper electronic state. With broad band absorption the resultant levels can have quantum numbers considerably higher than the upper lasing level. The excited molecule then relaxes to the upper lasing level which is one of the lower vibrational levels in the upper electronic state. The relaxation occurs from collisions, provided the molecule is not quenched into the ground level electronic state. Lasing occurs with a transition to a vibrational level in the lower electronic state. Rough estimates of solar power efficiencies are 1 percent for Na2 and probably a similar figure for Li2. The nondissociative lasers from a family distinct from materials which dissociate to yield an excited atom.

Harries, W. L.↗

NASA NTRS2004

Reduced-Order Blade Mistuning Analysis Techniques Developed for the Robust Design of Engine Rotors

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo-Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using eigenfrequency curve veerings to identify "danger zones" in the operating conditions--ranges of rotational speeds and engine orders in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued. Several methods will be investigated, including the use of intentional mistuning patterns to mitigate the harmful effects of random mistuning, and the modification of disk stiffness to avoid reaching critical values of interblade coupling in the desired operating range. Recent research progress is summarized in the following paragraphs. First, significant progress was made in the development of the component mode mistuning (CMM) and static mode compensation (SMC) methods for reduced-order modeling of mistuned bladed disks (see the following figure). The CMM method has been formalized and extended to allow a general treatment of mistuning. In addition, CMM allows individual mode mistuning, which accounts for the realistic effects of local variations in blade properties that lead to different mistuning values for different mode types (e.g., mistuning of the first torsion mode versus the second flexural mode). The accuracy and efficiency of the CMM method and the corresponding Turbo-Reduce code were validated for an example finite element model of a bladed disk.

Min, James B.↗

NASA NTRS2005

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

Min, James B.↗