SEARCH · Engineering Papers

Results for “Vibrational Spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Observation of D 2 molecule line emission after massive D 2 injection into runaway electron plateaus in DIII-D

Molecular deuterium line emission is observed in both the visible and ultraviolet (UV) wavelength ranges after massive (> 100 Torr-L) injection of D 2 gas into post-disruption runaway electron (RE) dominated plasmas in the DIII-D tokamak. D 2 UV line emission is found to be the dominant source of radiated power, surpassing D Lyα. Interpretive modeling with a collisional-radiative model (CRM) indicates that D 2 radiation surpasses D radiation because Lyα is strongly trapped, while D 2 UV lines are mostly untrapped. The CRM also indicates that the D 2 line emission is completely dominated by RE impact (rather than thermal electron impact), so the D 2 line emission can serve as a good diagnostic for the spatial localization of REs. Analysis of D 2 visible lines indicates that the D 2 molecules in the plasma are thermally equilibrated with the background plasma, with vibrational, rotational, and kinetic temperatures all near 0.3 eV. D 2 spectroscopy therefore serves as a convenient diagnostic of background plasma temperature. As a result, measurement of D 2 radiated power also appears to serve as a useful diagnostic for constraining neutral transport modeling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

In-situ Synthesis of PuCl 3 and Corresponding Raman and Density Functional Theory Vibrational Modes

The experimental and calculated Raman spectrum of PuCl 3 has been reported for the first time. PuCl 3 is a primary species found in plutonium metal refinement, specifically in pyrochemical salt processes including multicycle direct oxide reduction, metal chlorination, and electrorefining. As such, Raman signatures of PuCl 3 could serve as potential forensic indicators of material process history. A novel technique for synthesizing PuCl 3 from the in situ chlorination of plutonium metal with HCl was developed to establish these signatures. Cerium metal surrogates were utilized to ensure optimization of the plutonium experiments and to minimize personnel exposure, and all experiments were carried out in a Raman reaction chamber designed for air-tight, high vacuum environments. In situ Raman spectroscopy was employed in conjunction with density functional theory (DFT) to investigate the vibrational modes of PuCl 3 . Associated mixed oxy and hydroxyl phases are also reported. The combined Raman and DFT results have eliminated inconsistencies in Raman mode assignments for the MX 3 family of metal chlorides having P6 3 /m symmetry, and IR modes derived from the DFT calculations are additionally presented. The data observed in this study are of potential interest to nuclear forensic analyses, nuclear sample aging, nuclear energy, plutonium processing, and stockpile stewardship.

36 MATERIALS SCIENCE↗

DOE OSTI2023

In-situ Synthesis of PuCl 3 and Corresponding Raman and Density Functional Theory Vibrational Modes

The experimental and calculated Raman spectrum of PuCl 3 has been reported for the first time. PuCl 3 is a primary species found in plutonium metal refinement, specifically in pyrochemical salt processes including multicycle direct oxide reduction, metal chlorination, and electrorefining. As such, Raman signatures of PuCl 3 could serve as potential forensic indicators of material process history. A novel technique for synthesizing PuCl 3 from the in-situ chlorination of plutonium metal with HCl was developed to establish these signatures. Cerium metal surrogates were utilized to ensure optimization of the plutonium experiments and to minimize personnel exposure, and all experiments were carried out in a Raman reaction chamber designed for air-tight, high vacuum environments. In-situ Raman spectroscopy was employed in conjunction with Density Functional Theory (DFT) to investigate the vibrational modes of PuCl 3 . Associated mixed oxy and hydroxyl phases are also reported. The combined Raman and DFT results have eliminated inconsistencies in Raman mode assignments for the MX 3 family of metal chlorides having P6 3 /m symmetry, and IR modes derived from the DFT calculations are additionally presented. The data observed in this study is of potential interest to nuclear forensic analyses, nuclear sample aging, nuclear energy, plutonium processing, and stockpile stewardship.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Terahertz Circular Dichroism Spectroscopy of Molecular Assemblies and Nanostructures

Chemical, physical, biological and materials engineering disciplines use a variety of chiroptical spectroscopies to probe geometrical and optical asymmetry in molecules and particles. Electronic (ECD) and vibrational (VCD) circular dichroism are the most common of these techniques and collectively enable the studies of electronic and vibronic transitions with energies between 0.1 and 5.0 eV. The vibrational states with characteristic energies in the range of 0.001–0.01 eV carry valuable information about concerted intermolecular motions in molecules and crystals involving multiple atoms. These vibronic transitions located in the terahertz (THz) part of the spectrum become increasingly more important for the chemistry, physics, and biology of complex molecules and materials However, the methodology and hardware of THz circular dichroism (TCD) are much less developed than the chiroptical spectroscopies for ultraviolet, visible, near- and mid infrared photons. In this report we provide theoretical foundations, practical implementations, comparative assessments, and exemplary applications of TCD spectroscopy. We show that the sign, intensity, and position of TCD peaks are highly sensitive to the three-dimensional structure and long-range organization of molecular crystals, which offer unique capabilities to study (bio) molecules, their crystals, and nanoscale assemblies and apply the novel data processing methodologies. TCD also offers a convenient toolbox to identify new physical phenomena, such as chiral phonons and their propagation in nanostructured matter. We also discuss the major challenges, emerging opportunities and promising research directions, including broad investigation of chiral phonons observed in chiral (nano) crystals and emerging machine learning methodologies for TCD in biological and nanoscale structures. Ubiquity of low-frequency vibrations with rotational components in biomolecular structures, combined with sharpness of peaks in TCD spectra, enables a variety of technological translations.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Impact of cycling conditions on lithium-ion battery performance for electric vertical takeoff and landing applications

The development of better electrochemical energy storage systems has sparked significant interest in using Li-ion batteries for electric vertical takeoff and landing (eVTOL) applications. To ensure the optimal performance and safety of onboard batteries, their behavior under different charging/discharging protocols and environmental conditions must be understood. Here, this paper presents a comprehensive evaluation of commercial Li-ion batteries for eVTOL applications, focusing on their responses to varying charging/discharging strategies and mechanical vibrations experienced during flight. Through controlled experiments, the effects of rapid cycling on battery performance were investigated, including effects on lifespan, capacity, and internal resistance. Additionally, the impact of mechanical vibrations on battery behavior was assessed to identify potential challenges for onboard batteries. The results of this study revealed intriguing insights into the interplay between temperature, vibration, and battery performance. This work contributes to the broader adoption of electric aerial transportation, promising a greener and safer future for urban mobility.

18650 cells↗

DOE OSTI2025

Watching Polarons Dance: Coherent Carrier–Phonon Coupling in Hematite Revealed by Transient Absorption Spectroscopy

Hematite remains a prominent photoanode candidate for the oxygen evolution reaction in solar water splitting, despite efficiency limitations from rapid trapping of photoexcited electrons and holes. While the formation of polarons, quasiparticles formed by electron–hole interactions with lattice vibrations, is a proposed trapping mechanism, direct evidence of such states has been elusive. Here, we use potential-dependent transient absorption spectroscopy to identify the coherent phonon mode and strong exciton–phonon coupling responsible for exciton–polaron formation after band gap excitation in α-hematite and identify the three underlying d–d transitions that are strongly modulated by this phonon. The equilibrium geometry of exciton–polarons in α-hematite is displaced from the ground state geometry along the vibrational coordinate of an A 1g symmetric Fe–O stretching motion at 225 ± 7 cm –1 , resulting in vibrational coherence with a lifetime of 1.9 ± 0.1 ps. Our comparative ex situ and in situ experiments reveal that the energy and dephasing time of the A 1g mode are remarkably resilient to applied potential and the addition of an Al 2 O 3 overlayer; however, the dephasing time is sensitive to substrate identity. Furthermore, this potential-dependent transient absorption approach establishes a powerful platform for directly probing polaron dynamics in photoelectrochemical systems, opening new pathways to rationally design modified hematite and other transition metal oxide electrodes with enhanced charge transport properties for more efficient solar water splitting.

Hematite↗

DOE OSTI2020

Searching for correlations between vibrational spectral features and structural parameters of silicate glass network

Infrared (IR) and Raman spectroscopic features of silicate glasses are usually interpreted based on the analogy with those of smaller molecules, molecular clusters, or crystalline counterparts; this study tests the accuracy and validity of these widely cited peak assignment schemes by comparing vibrational spectral features with bond parameters of the glass network created by molecular dynamics (MD) simulations. A series of sodium silicate glasses with compositions of [Na 2 O] x [Al 2 O 3 ] 2 [SiO 2 ] 98- x with x = 7, 12, 17, and 22 were synthesized and analyzed with IR and Raman. A silica glass substrate and a crystalline quartz were also analyzed for comparison. Glass structures with the same compositions were generated with MD simulations using three types of potentials: fixed partial charge pairwise (Teter), partial diffuse charge potential (MGFF), and bond order-based charge transfer potential (ReaxFF). The comparison of simulated and experimental IR spectra showed that, among these three potentials tested, ReaxFF reproduces the concentration dependence of spectral features closest to the experimentally observed trend. Hence, the bond length and angle distributions as well as Si– Q n species and ring size distributions of silica and sodium silicate glasses were obtained from ReaxFF-MD simulations and further compared with the peak assignment or deconvolution schemes—which have been widely used since 1970s and 1980s—(a) correlation between the IR peak position in the Si–O stretch region (1050-1120 cm -1 ) and the Si–O–Si bond angle; (b) deconvolution of the Raman bands in the Si–O stretch region with the Q n speciation; and (c) assignment of the Raman bands in the 420-600 cm -1 region to the bending modes of (SiO) n rings with different sizes (typically, n = 3-6). The comparisons showed that none of these widely used methods is congruent with the bond parameters or structures of silicate glass networks produced via ReaxFF-MD simulations. This result invokes that the adequacy of these spectral interpretation methods must be questioned. Alternative interpretations are proposed, which are to be tested independently in future studies.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Phonon Spectroscopy in Antimony and Tellurium Oxides

α-Sb 2 O 3 (senarmontite), β-Sb 2 O 3 (valentinite), and α-TeO 2 (paratellurite) are compounds with pronounced stereochemically active Sb and Te lone pairs. The vibrational and lattice properties of each have been previously studied but often lead to incomplete or unreliable results due to modes being inactive in infrared or Raman spectroscopy. Here in this paper, we present a study of the relationship between bonding and lattice dynamics of these compounds. Mössbauer spectroscopy is used to study the structure of Sb in α-Sb 2 O 3 and β-Sb 2 O 3 , whereas the vibrational modes of Sb and Te for each oxide are investigated using nuclear inelastic scattering, and further information on O vibrational modes is obtained using inelastic neutron scattering. Additionally, vibrational frequencies obtained by density functional theory (DFT) calculations are compared with experimental results in order to assess the validity of the utilized functional. Good agreement was found between DFT-calculated and experimental density of phonon states with a 7% scaling factor. The Sb–O–Sb wagging mode of α-Sb 2 O 3 whose frequency was not clear in most previous studies is experimentally observed for the first time at ~340 cm -1 . Softer lattice vibrational modes occur in orthorhombic β-Sb 2 O 3 compared to cubic α-Sb 2 O 3 , indicating that the antimony bonds are weakened upon transforming from the molecular α phase to the layer-chained β structure. The resulting vibrational entropy increase of 0.45 ± 0.1 kB/Sb 2 O 3 at 880 K accounts for about half of the α–β transition entropy. The comparison of experimental and theoretical approaches presented here provides a detailed picture of the lattice dynamics in these oxides beyond the zone center and shows that the accuracy of DFT is sufficient for future calculations of similar material structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Quantum Interferometric Pathway Selectivity in Difference-Frequency-Generation Spectroscopy

Even-order spectroscopies such as sum-frequency generation (SFG) and difference-frequency generation (DFG) can serve as direct probes of molecular chirality. Such signals are usually given by the sum of several interaction pathways that carry different information about matter. Here we focus on DFG, involving impulsive optical–optical–IR interactions, where the last IR pulse probes vibrational transitions in the ground or excited electronic state manifolds, depending on the interaction pathway. Spectroscopy with classical light can use phase matching to select the two pathways. In this theoretical study, we propose a novel quantum interferometric protocol that uses entangled photons to isolate individual pathways. Importantly, this additional selectivity originates from engineering the state of light using a Zou–Wang–Mandel interferometer combined with coincidence detection.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Structural and vibrational properties of methane up to 71 GPa

Single-crystal synchrotron x-ray diffraction, Raman spectroscopy, and first principles calculations have been used to identify the structure of the high-pressure (HP) phase of molecular methane above 20 GPa up to 71 GPa at room temperature. The structure of the HP phase is trigonal R3, which can be represented as a distortion of the cubic phase B, previously documented at 7–15 GPa and confirmed here. The positions of hydrogen atoms in the HP phase have been obtained from first principles calculations, which also demonstrated the stability of this structure above 260 K at 25 GPa. The molecules occupy four different crystallographic sites in phase B and 11 sites in the HP phase, which result in splitting of molecular stretching modes detected in Raman spectroscopy and assigned here based on a good agreement with the Raman spectra calculated from the first principles. Furthermore, our study points out to a single HP phase unlike up to three HP phases proposed previously based on the Raman spectroscopy results only.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2022

Probing the electronic structure and spectroscopy of pyrrolyl and imidazolyl radicals using high-resolution photoelectron imaging of cryogenically cooled anions

High-resolution photoelectron imaging and photodetachment spectroscopy of cryogenically cooled pyrrolide and imidazolide anions are used to probe the electronic structure and spectroscopy of pyrrolyl and imidazolyl radicals. The high-resolution data allow the ground state vibronic structures of the two radicals to be completely resolved, yielding accurate electron affinities of 2.1433 ± 0.0008 eV and 2.6046 ± 0.0006 eV for pyrrolyl and imidazolyl radicals, respectively. Fundamental frequencies for eight vibrational modes of pyrrolyl and ten vibrational modes of imidazolyl are measured, including several nonsymmetric Franck–Condon-forbidden modes. Two electronic excited states are also observed for the two radicals, displaying diffuse spectral features in both systems. The observations of nonsymmetric vibrational modes in the ground states and the diffuse excited state features provide strong evidence for vibronic couplings between the ground state and the two close-by excited states. The 2-pyrrolide isomer is also observed as a minor species from the electrospray ionization source and the electron affinity of 2-pyrrolyl is measured to be 1.6690 ± 0.0030 eV along with five vibrational frequencies. Even though the HOMOs of both pyrrolide and imidazolide anions are p orbitals, photodetachment spectroscopy reveals completely different threshold behaviors for the two anions: a d-wave-dominated spectrum for pyrrolide and an s-wave-dominated spectrum for imidazolide. Furthermore, the current study provides a wealth of electronic and spectroscopic information, which is ideal to compare with more accurate vibronic coupling calculations for these two important radicals, as well as interesting information about the photodetachment dynamics of the two anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Guiding Principles for the Rational Design of Hybrid Materials: Use of DFT Methodology for Evaluating Non‐Covalent Interactions in a Uranyl Tetrahalide Model System

Abstract Together with the synthesis and experimental characterization of 14 hybrid materials containing [UO 2 X 4 ] 2− (X=Cl − and Br − ) and organic cations, we report on novel methods for determining correlation trends in their formation enthalpy (ΔH f ) and observed vibrational signatures. Δ H f values were analyzed through isothermal acid calorimetry and a Density Functional Theory+Thermodynamics (DFT+T) approach with results showing good agreement between theory and experiment. Three factors (packing efficiency, cation protonation enthalpy, and hydrogen bonding energy [ ]) were assessed as descriptors for trends in Δ H f . Results demonstrated a strong correlation between and Δ H f , highlighting the importance of hydrogen bonding networks in determining the relative stability of solid‐state hybrid materials. Lastly, we investigate how hydrogen bonding networks affect the vibrational characteristics of uranyl solid‐state materials using experimental Raman and IR spectroscopy and theoretical bond orders and find that hydrogen bonding can red‐shift U≡O stretching modes. Overall, the tightly integrated experimental and theoretical studies presented here bridge the trends in macroscopic thermodynamic energies and spectroscopic features with molecular‐level details of the geometry and electronic structure. This modeling framework forms a basis for exploring 3D hydrogen bonding as a tunable design feature in the pursuit of supramolecular materials by rational design.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Guiding Principles for the Rational Design of Hybrid Materials: Use of DFT Methodology for Evaluating Non‐Covalent Interactions in a Uranyl Tetrahalide Model System

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Synthesis and characterization of the rare-earth chloride complexes with N,N,N',N' -tetramethylmalonamide

Exploration of the solid-state chemistry of the f-elements and their coordination chemistry can assist in understanding the speciation of these elements in solution, which, in turn, can aid in the interpretation of their chemical behavior in complex liquid-liquid separations. Within these separation processes, malonamides are common organic extractants that are used for complexing both lanthanides and actinides, thus it is relevant to understand the malonamide ligand complexation under various conditions. In this work, we investigate solid-state complexes of the rare-earth chlorides with N,N,N',N' -tetramethylmalonamide (TMMA) across the entire lanthanide series. Here, we isolated two structural families of compounds Ln(TMMA) 2 Cl 3 Ln = La–Dy and [Ln(TMMA) 2 (H 2 O) 4 ]Cl 3 • x H 2 O x = 0,4 Ln = Ho–Lu, showing differences in chloride coordination from the inner-sphere complex for early lanthanides to outer-sphere for the late lanthanides. Both structural series were additionally analyzed by both IR and Raman spectroscopy confirming similarities in malonamide ligand coordination modes, while showing differences in vibrational features associated with chloride and aqua ligand coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Photochemistry sample sticks for inelastic neutron scattering

Every material experiences atomic and molecular motions that are generally termed vibrations in gases and liquids or phonons in solid state materials. Optical spectroscopy techniques, such as Raman, infrared absorption spectroscopy, or inelastic neutron scattering (INS), can be used to measure the vibrational/phonon spectrum of ground state materials properties. A variety of optical pump probe spectroscopies enable the measurement of excited states or elucidate photochemical reaction pathways and kinetics. So far, it has not been possible to study photoactive materials or processes in situ using INS due to the mismatch between neutron and photon penetration depths, differences between the flux density of photons and neutrons, cryogenic temperatures for INS measurements, vacuum conditions, and a lack of optical access to the sample space. These experimental hurdles have resulted in very limited photochemistry studies using INS. Here we report on the design of two different photochemistry sample sticks that overcome these experimental hurdles to enable in situ photochemical studies using INS, specifically at the VISION instrument at Oak Ridge National Laboratory. We demonstrate the use of these new measurement capabilities through (1) the in situ photodimerization of anthracene and (2) the in situ photopolymerization of a 405 nm photoresin using 405 nm excitation as simple test cases. Furthermore, these new measurement apparatus broaden the science enabled by INS to include photoactive materials, optically excited states, and photoinitiated reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Crossover from hydrogen to chemical bonding

Hydrogen bonds (H-bonds) can be interpreted as a classical electrostatic interaction or as a covalent chemical bond if the interaction is strong enough. As a result, short strong H-bonds exist at an intersection between qualitatively different bonding descriptions, with few experimental methods to understand this dichotomy. The [F-H-F] − ion represents a bare short H-bond, whose distinctive vibrational potential in water is revealed with femtosecond two-dimensional infrared spectroscopy. It shows the superharmonic behavior of the proton motion, which is strongly coupled to the donor-acceptor stretching and disappears on H-bond bending. In combination with high-level quantum-chemical calculations, we demonstrate a distinct crossover in spectroscopic properties from conventional to short strong H-bonds, which identify where hydrogen bonding ends and chemical bonding begins.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Li Isotope Signatures using Optical Spectroscopies

The primary goal of this work is to investigate the detection capabilities of laser ablation molecular isotopic spectrometry (LAMIS) and Raman spectroscopy for lithium isotopic determination as related to Li enrichment activities. LAMIS is an emerging spectroscopic technique that takes advantage of the fact that molecules exhibit much larger isotopic wavelength shifts in molecular emission spectra than their atomic counterparts. Raman spectroscopy has been shown to exhibit isotopic shifts if a given molecular vibration involves the isotope of interest. Both techniques are comprised of the same basic hardware: a spectrometer, a laser system (pulsed for LAMIS, pulsed or CW for Raman), and an intensified charge-coupled device (ICCD). Shifts in Raman spectra due to lithium isotopes in Li 2 C0 3 and LiOH*H 2 0 were observed. LAMIS measurements of the same compounds have not been successful yet, as no lithium containing molecular emissions have been identified to this point. However, an isotopic shift of the self-reversal of an atomic lithium emission was observed, which is another optical technique used to measure isotopes.

07 ISOTOPE AND RADIATION SOURCES↗

DOE OSTI2025

Photosynthesis Protein Collective Vibrations Role in Energy Transfer and Dissipation (Final Technical Report)

This project investigates how low‑frequency collective vibrations of photosynthetic proteins control energy transfer and dissipation, using terahertz (THz) spectroscopy and advanced theoretical analysis. The central hypothesis is that specific long‑range protein scaffold motions, rather than just local chromophore dynamics, steer exciton transport and photoprotection by modulating energy gaps and coupling between pigments.

14 SOLAR ENERGY↗