Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VORTEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Interaction of an oscillating vortex with a turbulent boundary layer

The effects on mean flow and turbulence caused by meander of a vortex embedded in a two-dimensional boundary layer were investigated experimentally by driving a forced lateral oscillation of the vortex generator. Upstream, the vorticity contours without forcing were found to be round. The forced vortex generator oscillation caused a flattening of the time-averaged vorticity contours and changes in some of the Reynolds stresses. The results indicate that the unforced vortex did not meander significantly upstream, and that the effects of meander can be understood qualitatively from production of Reynolds stresses by the forced motion acting with the exiting three-dimensional velocity field. Farther downstream, the observed differences in the mean vorticity and Reynolds stresses caused by forcing were smaller, mainly because the vortex was substantially diffused at this station, resulting in smaller mean velocity gradients.

Westphal, Russell V.↗

Experimental study of the vortex flow behavior on a generic fighter wing at subsonic and transonic speeds

A subsonic and transonic investigation of the vortex flow behavior of a generic fighter configuration with 55-deg cropped delta wing has been conducted in order to improve current understanding of vortical motions on a wing with deflected leading edge flap at moderate and high angles-of-attack. The leading edge vortex strength was reduced, and the vortex was flatter and closer to the wing surface, as the Mach number increased. Transonically, at high angles-of-attack, the test data suggested the development of a cross-flow shock wave above the vortex sheet which coexisted with a rear shock wave. Subsonically, a deflected leading edge flap was able to sustain a concentrated vortex on the forward-facing surface.

Erickson, Gary E.↗

Review of vortex flow flight projects on the F-106B

NASA-Langley's F-106B research aircraft is being used in vortex flow-research flight experiments in order to determine the effects of Re number and Mach number on the lee-side vortex system generated at angles-of-attack up to maneuver condition, as well as to evaluate the aerodynamic characteristics of a sharp leading-edge vortex flap system. The wing vortex system is visualized at a fixed position by means of the vapor-screen technique. Comparisons are made between a measured value and two theoretical estimates of a pertinent vortex system property, core location.

Lamar, J. E.↗

Analysis of the breakdown of the Antarctic circumpolar vortex using TOMS ozone data

Climatological analysis of data from the Total Ozone Mapping Spectrometer (TOMS) on the Nimbus 7 satellite has shown that the annual cycles of ozone are very different in the Arctic and Antarctic. The annual cycle in the Arctic is a relatively smooth annual sine wave; but in the Antarctic the circumpolar vortex breaks down rapidly during the Southern Hemisphere spring (September through November), producing a rapid rise in total ozone and a sawtooth-shaped annual cycle. The evolution of the Antarctic total ozone field during the vortex breakdown was studied by computing areally-integrated ozone amounts from the TOMS data. This technique avoids substantial difficulties with using zonally-averaged ozone amounts to study the asymmetric breakdown phenomenon. Variability of total ozone is found to be large both within an individual year and between different years. During the last decade monthly-mean total ozone values in the Antarctic during the springtime vortex breakdown period have decreased dramatically. The ozone-area statistics indicate that the decrease has resulted in part from changes in the timing of the vortex breakdown and resultant ozone increase, which have occurred later during recent years. Analysis of the spatial scales involved in the ozone transport and mixing that occur during the vortex breakdown is now underway. Reliable calculation of diagnostic quantities like areally-integrated ozone is possible only with the high-resolution, two-dimensional, daily coverage provided by the TOMS instrument.

Bowman, Kenneth P.↗

Control of leading edge vortex breakdown by blowing

An investigation into the effects of using a jet of air to control the vortex breakdown position on a 70 degree delta wing is presented. The specific objectives focused on optimizing the blowing positions in terms of maximum lift increments obtained for minimum blowing rates. The tests were conducted at chord Reynolds numbers of 150,000, 200,000, and 250,000 at angles of incidence of 30 and 35 degrees. Visualization and force data is presented to show the effect of the jet on the wing aerodynamic characteristics. The results indicate a jet position located at and aligned parallel to the leading edge to be the optimum. Nearness to the apex and tangency to the upper surface were also crucial factors. The influence of the jet on the leading edge vortex structure was examined using laser Doppler anemometry. Velocity surveys through the vortex showed that at high blowing rates the parallel velocity in the outer swirling region of the vortex increased and the normal velocity decreased. This resulted in a decrease in the swirling angle in the outer region. The peak core velocity was reduced and the vortex breakdown was delayed.

Visser, K. D.↗

Climatology of the stratospheric polar vortex and planetary wave breaking

The distribution of Ertel's potential vorticity (PV) on the 850 K isentropic surface is used to establish a climatology for the transient evolution of the planetary scale circulation in the Northern Hemisphere winter midstratosphere. PV distributions are computed from gridded NMC daily temperature and height maps for the 10 and 30 mb levels, and show that a very good approximation for 850 K PV can be derived from 10 mb heights and temperatures alone. It is assumed that reversals of the latitudinal gradient of PV, localized in longitude and latitude may be regarded as signatures of planetary wave breaking. Wave breaking identified by such signatures tends to occur mainly in the vicinity of the Aleutian anticyclone, with a secondary maximum over Europe. The area of the polar vortex, defined as the area enclosed by PV contours greater than a certain critical value, is strongly influenced by wave breaking. Erosion of the polar vortex due to transport and mixing of PV leads to a preconditioned state, when defined in terms of vortex area, that always occurs prior to major stratospheric warmings. During winters with little PV transport or mixing, the vortex area evolves rather uniformly in response to radiative forcing. During winters with major sudden warmings, the wave breaking signature as defined here first appears at low values of PV, then rapidly moves toward higher values as the vortex area is reduced and the 'surf-zone' structure becomes well defined.

Baldwin, Mark P.↗

A streamwise vortex embedded in a plane mixing layer

Experimental results are presented on the interaction of a single streamwise vortex with a plane turbulent mixing layer. In the present setup, the vortex is generated by a half-delta wing mounted in the settling chamber of a blower-driven wind tunnel. Initially, the vortex is shown to ride just below the mixing layer, locally distorting the mean velocity and turbulence Reynolds stress distributions in the lower part of the mixing layer. Once the vortex becomes embedded within the mixing layer, the distortions are found to spread through the whole width of the layer, and the induced extra strain rates in the mixing layer result in the generation of additional, relatively large, Reynolds normal and shear stresses, mainly in the regions above the vortex.

Bell, James H.↗

Temporal trends and transport within and around the Antarctic polar vortex during the formation of the 1987 Antarctic ozone hole

During AAOE in 1987 an ER-2 high altitude aircraft made twelve flights out of Punta Arenas, Chile (53 S, 71 W) into the Antarctic polar vortex. The aircraft was fitted with fast response instruments for in situ measurements of many trace species including O3, ClO, BrO, NO sub y, NO, H2O, and N2O. Grab samples of long-lived tracers were also taken and a scanning microwave radiometer measured temperatures above and below the aircraft. Temperature, pressure, and wind measurements were also made on the flight tracks. Most of these flights were flown to 72 S, at a constant potential temperature, followed by a dip to a lower altitude and again assuming a sometimes different potential temperature for the return leg. The potential temperature chosen was 425 K (17 to 18 km) on 12 of the flight legs, and 5 of the flight legs were flown at 450 K (18 to 19 km). The remaining 7 legs of the 12 flights were not flown on constant potential temperature surfaces. Tracer data have been analyzed for temporal trends. Data from the ascents out of Punta Arenas, the constant potential temperature flight legs, and the dips within the vortex are used to compare tracer values inside and outside the vortex, both with respect to constant potential temperature and constant N2O. The time trend during the one-month period of August 23 through September 22, 1987, shows that ozone decreased by 50 percent or more at altitudes form 15 to 19 km. This trend is evident whether analyzed with respect to constant potential temperature or constant N2O. The trend analysis for ozone outside the vortex shows no downward trend during this period. The analysis for N2O at a constant potential temperature indicates no significant trend either inside or outside the vortex; however, a decrease in N2O with an increase in latitude is evident.

Proffitt, M. H.↗

Aerodynamics of vortex generators

An experimental and theoretical study was undertaken of the separation delay and dramatic boundary-layer thinning that can occur in vortex-generator installations. Wind tunnel measurements of the dynamic-pressure profile downstream of a vortex generator were found to compare under certain conditions with that downstream of a suction slit, while water-tunnel visualization studies of vortex-generator height and geometry suggested optimum configurations, and only a minor effect of base porosity. A series of progressively more complex inviscid flow models was developed to be applied to a 3-D integral boundary-layer code. This code predicted layer thinning downstream of the suction site of the vortex models, and other observed features. Thin-layer Navier-Stokes equations are now being used with the ultimate goal of clarifying the physical processes involved in vortex generator performance and developing calculational procedures capable of predicting it.

Breidenthal, Robert E., Jr.↗

A numerical study of viscous vortex rings using a spectral method

Viscous, axisymmetric vortex rings are investigated numerically by solving the incompressible Navier-Stokes equations using a spectral method designed for this type of flow. The results presented are axisymmetric, but the method is developed to be naturally extended to three dimensions. The spectral method relies on divergence-free basis functions. The basis functions are formed in spherical coordinates using Vector Spherical Harmonics in the angular directions, and Jacobi polynomials together with a mapping in the radial direction. Simulations are performed of a single ring over a wide range of Reynolds numbers (Re approximately equal gamma/nu), 0.001 less than or equal to 1000, and of two interacting rings. At large times, regardless of the early history of the vortex ring, it is observed that the flow approaches a Stokes solution that depends only on the total hydrodynamic impulse, which is conserved for all time. At small times, from an infinitely thin ring, the propagation speeds of vortex rings of varying Re are computed and comparisons are made with the asymptotic theory by Saffman. The results are in agreement with the theory; furthermore, the error is found to be smaller than Saffman's own estimate by a factor square root ((nu x t)/R squared) (at least for Re=0). The error also decreases with increasing Re at fixed core-to-ring radius ratio, and appears to be independent of Re as Re approaches infinity). Following a single ring, with Re=500, the vorticity contours indicate shedding of vorticity into the wake and a settling of an initially circular core to a more elliptical shape, similar to Norbury's steady inviscid vortices. Finally, we consider the case of leapfrogging vortex rings with Re=1000. The results show severe straining of the inner vortex core in the first pass and merging of the two cores during the second pass.

Stanaway, S. K.↗

An experimental and computational study of rotor-vortex interactions

An experimental and computational study has been performed on a close rotor-blade/vortex interaction. Surface pressure data was obtained from a rotor operating close to the tip-vortex from an upstream wing in a wind tunnel. Data was obtained for a wide range of blade-vortex proximities, orientations, and blade-tip Mach numbers (up to the transonic regime). A numerical model of these interactions was constructed using the unsteady, three-dimensional, full-potential rotor code called FPR. The model employed an undistorted full-field representation of the measured vortex. This simple model gave excellent comparisons with the data for a wide range of conditions, including parallel head-on interactions. Computational studies have also been performed on the manner of vortex representation and the influence of vortex-core size.

Caradonna, Francis X.↗

Estimate of loads during wing-vortex interactions by Munk's transverse-flow method

The inviscid, incompressible interaction of a wing with a vortex is studied by use of Munk's transverse-flow method. The method assumes that the loading on the wing is such that the local circulatory flow of the vortex is turned so that the wing and its vortex wake act as a barrier to the flow. This permits the analysis to be carried out by mapping the transverse flowfield into the flow about a circle to find the vorticity distribution in the wake. Closed-form expressions are then derived for the bound circulation in the wind and for the lift and rolling moment induced by the vortex on the encountering wing. Comparisons of the loads predicted by these relationships with those of vortex-lattice theory for a flat wing of a rectangular planform indicate that they accurately represent the various parameters when the aspect ratio of the encountering wing is less than about two. When flat rectangular wings of higher aspect ratios are considered, some sort of correction is needed. Examples are then presented to illustrate some applications of the results.

Rossow, Vernon J.↗

A device for introducing helical perturbations into a trailing line vortex

A perturbation generator has been designed which can be attached to the centerbody of a matched airfoil type vortex generator. The device was desired to enable the introduction of helical-wave, velocity perturbations into a vortex core to permit experimental verification of theoretical vortex stability predictions. Evaluation of the perturbation generator performance, prior to vortex stability studies, has been reported here. Controlled perturbations with frequencies above 200 hz have been produced, but visual observations were insufficient to confirm their helical character. Hot wire velocity spectrum data have confirmed the device's ability to introduce controlled frequency fluctuations. In addition, other flow oscillations have been discussed which can influence the controllability of vortex perturbations.

Ash, Robert L.↗

Canard-wing vortex interactions at subsonic through supersonic speeds

The NASA-Ames 6 x 6-foot Transonic/Supersonic Wind Tunnel has been used to conduct a study of canard-wing flowfield interactions at sub-, trans-, and supersonic speeds, giving attention to vortex interactions, vortex breakdown, shock-wave development, and vortex-shock interactions. The results obtained show that the canard-wing flowfield interaction delays vortex breakdown to a higher angle-of-attack at sub- and transonic speeds; while the flowfield interference eliminates shock-induced secondary boundary layer separation on the wing, it does not alter the location and development of a rear shock wave extending laterally across the wing. A canard-induced upwash field accelerates the upward migration of the wing vortex at sub-through-supersonic speeds, but is most pronounced at transonic speeds due to the interaction of the vortical flow with the rear shock wave.

Erickson, Gary E.↗

The structure and dynamics of bubble-type vortex breakdown

A unique discrete form of the Navier-Stokes equations for unsteady, three-dimensional, incompressible flow has been used to study vortex breakdown numerically. A Burgers-type vortex was introduced along the central axis of the computational domain, and allowed to evolve in space and time. By varying the strength of the vortex and the free stream axial velocity distribution, using a previously developed Rossby number criterion as a guide, the location and size of the vortex breakdown region was controlled. While the boundaries of the vortex breakdown bubble appear to be nominally symmetric, the internal flow field is not. Consequently, the mechanisms for mixing and entrainment required to sustain the bubble region are different from those suggested by earlier axisymmetric models. Results presented in this study, for a Reynolds number of 200, are in good qualitative agreement with higher Reynolds number experimental observations, and a variety of plots have been presented to help illuminate the fluid physics.

Spall, R. E.↗

Interaction of a streamwise vortex with a turbulent mixing layer

The interaction of a single streamwise vortex with a plane turbulent mixing layer is experimentally studied. Initially, near the mixing layer origin, the vortex rides just below the layer and only affects the mixing layer properties near the bottom side of the mixing layer. Once the vortex starts to become embedded within the mixing layer and active interaction has begun, the effect of the vortex is to grossly distort the mean velocity and turbulence contours over the whole width of the mixing layer. The induced cross-flow velocities in the mixing layer result in the production of additional normal Reynolds stresses which in turn act with mean flow gradients to generate extra shear stresses. In particular, the secondary shear stress (SSS) achieves an absolute peak value equivalent to about 40 percent of the maximum primary shear stress. The position and decay of the SSS peak are then found to be strongly correlated with those of the streamwise vortex.

Bell, James H.↗

A comparison of airborne wake vortex detection measurements with values predicted from potential theory

An analysis of flight measurements made near a wake vortex was conducted to explore the feasibility of providing a pilot with useful wake avoidance information. The measurements were made with relatively low cost flow and motion sensors on a light airplane flying near the wake vortex of a turboprop airplane weighing approximately 90000 lbs. Algorithms were developed which removed the response of the airplane to control inputs from the total airplane response and produced parameters which were due solely to the flow field of the vortex. These parameters were compared with values predicted by potential theory. The results indicated that the presence of the vortex could be detected by a combination of parameters derived from the simple sensors. However, the location and strength of the vortex cannot be determined without additional and more accurate sensors.

Stewart, Eric C.↗

Vortex control: Further encounters

The progress of continuing investigations on vortex control techniques is updated. The following topics are briefly discussed: (1) vortex flaps adapted for high-alpha control; (2) alleviation of leading edge extension (LEX) vortex induced twin-tail buffet; (3) controlled decoupling of interactive forebody chine and wing vortices; (4) forebody vortex manipulation by mechanical and pneumatic techniques; and (5) stall-departure alleviation of high aspect-ratio wings. Salient results of exploratory low speed wind tunned experiments are presented. The investigations, primarily aimed at concept validation, were performed on generic configurations utilizing flow visualizations and pressure and balance measurements. Selected results illustrate the efficacy and potential for development of specific vortex control concepts for improved high-alpha configuration aerodynamics.

Rao, Dhanvada M.↗