Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

On the optimal sizing of power take-off systems for wave energy converters

The power take-off (PTO) system in a wave energy converter (WEC) is the means by which the energy in an ocean wave is converted into useful energy. There has been a general lack of technology convergence in the wave energy industry and PTO design has been largely device-specific with the design process determined by the WEC developer. An optimized PTO design can significantly affect the efficiency, reliability, performance, and overall cost and viability of a device. There remains a need in the marine energy industry for best practices and efficient design processes to be identified as it could greatly benefit developers and researchers in designing an optimal WEC PTO. This research utilizes the open-source Matlab-Simulink based software, WEC-Sim, which was developed by the National Renewable Energy Laboratory, and the Eagle, a high-performance computing system, to model and optimize two WECs of different archetypes and then investigates if any trends exist that can be exploited for greater efficiency in optimal PTO design. The results from this research indicate that there may be an optimal sizing for WEC PTOs for both power and PTO force rating and that substantial reductions can be made in the cost of a device without significant loss in the energy produced. Furthermore this optimal sizing may be independent of WEC type and deployment location. With an optimal, or near optimal, approach to WEC PTO sizing demonstrated, a methodology is proposed to address the challenge of nameplate ratings in the wave energy industry.

13 HYDRO ENERGY↗
DOE OSTI2020

Water reuse for sustainable microalgae cultivation: current knowledge and future directions

Microalgae hold great promise as environmentally sustainable sources of food, animal feed, and fuel. However, large amounts of water are used during microalgae cultivation and this negatively impacts economic viability and environmental sustainability. Reusing cultivation water can reduce the direct impacts of water usage and also reduce nutrient requirements and algal wastewater treatment. However, studies have shown that algae growth in reused water can be compromised, unaffected, or sometimes enhanced compared to controls. This review examines recent studies on water reuse to qualitatively understand these varied effects. Growth inhibitors and stimulators in reused water and their underlying mechanisms are discussed, as well as recent pre-treatment technologies and factors affecting the quality of reused water, such as microalgae taxa, culture conditions, and harvesting methods, are considered. A scheme is proposed for water reuse and harvesting methods based on the desired algal end products. Finally, taking these findings together, here we provide recommendations for further research directions as well as new insights into designing and integrating a cultivation strategy with a harvesting platform to reuse water for more efficient microalgae cultivation.

42 ENGINEERING↗
DOE OSTI2021

U.S. lithium resources from geothermal and extraction feasibility

As the demand for electric vehicles (EVs) increases, demand for lithium (Li) is expected to grow over the coming decade. To satisfy the demand for rechargeable batteries, it is imperative to devise solutions for sufficient Li production. Additionally, even though commercial Li currently comes from conventional saline salar brine and spodumene ore extractions, efforts to retrieve Li from geothermal brines are increasing in popularity. In this paper, we evaluate the United States’ potential to supply Li from geothermal brines using Systems Dynamics modeling. The main goals are to assess (1) the viability of US Li supply from geothermal brines and (2) the potential supply chain impact of extracting Li from this source. Results show that Li supply from geothermal brines could (1) reach around 4% to 8% of total US Li supply and (2) be economically viable.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Evaluation of sustainable waste management: An analysis of techno-economic and life cycle assessments of municipal solid waste sorting and decontamination

This study evaluates the economic and environmental feasibility of Municipal Solid Waste (MSW) sorting and decontamination technologies across urban, suburban, and rural areas. Using Techno-Economic Analysis (TEA) and Life Cycle Assessment (LCA), the research assesses cost-effectiveness and environmental impacts, with a focus on cost variability analyzed through Monte Carlo simulations. Findings indicate significant cost differences based on population density: rural areas incur high costs up to $$764/ton due to low waste volumes and limited infrastructure, whereas suburban and urban areas have more feasible costs ranging from $36.3 to $142.5/ton. Environmental impacts also vary, with greenhouse gas emissions at 171 kg CO 2 eq/ton for copy paper and 118.6 kg CO 2 eq/ton for plastics. PM2.5 levels are 9.1 g/ton for copy paper and 6.3 g/ton for plastics, with sorting lines being the main contributors. Monte Carlo simulations reveal a 50% probability of costs being below $$102.26/ton for copy paper and $115.8/ton for plastics in suburban settings. Further, the study underscores the importance of customized waste management strategies to improve economic viability and sustainability based on local conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Techno-economic analysis of hydroprocessed renewable jet fuel production from pennycress oilseed

Commercial production of jet fuel from biobased feedstocks is still encumbering, mainly due to their high production cost and competition with food resources. Pennycress oilseed is a potential jet fuel feedstock which can be supplied at a lower price compared to similar oilseeds, such as soybean and canola. However, the technoeconomics of pennycress-based jet fuel production needs to be evaluated. The objective of this study was to assess the technical feasibility and costs of hydroprocessed renewable jet fuel (HRJ) production from pennycress. The production capacity was considered to be 18.9 million L/yr (5 million gal/yr). The analysis considered pennycress grain handling and conditioning, oil extraction and conversion to HRJ and byproducts, i.e., LPG, naphtha and green diesel, through hydroprocessing technology, as well as pennycress meal processing as boiler fuel and wastewater treatment. Total investment for establishing the HRJ biorefinery at the selected capacity was estimated to be 90.8 million USD. Minimum selling price (MSP) of HRJ was estimated to be 1.2 USD/L, which was comparable to the MSP of HRJ from similar oilseeds, including soybean and canola. It could also be further reduced by supplying pennycress grain at a lower price, increasing the oil content and increasing the production capacity of the biorefinery. Furthermore, the outcomes of this research would help establish the performance targets needed to reach the economic viability of HRJ production from pennycress at the commercial scale.

09 BIOMASS FUELS↗
DOE OSTI2023

Desiccants enabling energy-efficient buildings: A review

Buildings account for about 39% of the total energy consumption in the United States. Developing highly energy-efficient and environmentally friendly systems that are either actively or passively integrated into buildings plays a crucial role in decarbonizing the building sector. Among various technologies, desiccant-based energy systems have received particular attention in recent years due to their unique advantages, such as being thermally driven using low-grade waste or solar energies and being reliable over a wide range of operating ranges. Extensive research efforts have been exerted on desiccant-enabled technologies at both material and system levels aiming to increase their performance and achieve high technological readiness levels. The present review paper comprehensively discusses research works made at the system level. It overviews desiccant-based air conditioning systems, desiccant-based humidity pumps, desiccant-based thermal energy storage systems, and desiccant-based appliances. The study identifies challenges and opportunities to accelerate the commercialization of desiccant-enabled technologies. It is found that desiccant materials offer great promise to improve energy efficiency and functionality of future buildings through decoupling the latent and sensible cooling loads in air conditioning systems, humidity pumps integrated into building facades, and next-generation appliances. However, commercial viability and widespread acceptance of desiccant-based systems have been hampered by several major obstacles, including liquid and air flow mal-distribution and inferior thermo-physical properties of desiccant materials resulting in low ab/adsorption and regeneration rates and bulky/costly systems.

25 ENERGY STORAGE↗
DOE OSTI2023

The significance of biomass densification in biological-based biorefineries: A critical review

Replacing fossil fuels with renewable biofuels derived from lignocellulosic biomass is an important aspect of addressing environmental challenges and developing a sustainable industrial society. Densification overcomes the problems of low bulk density and poor flowability of biomass and has been commercialized for producing solid biofuels, but the overall impact of densification on biological-based biorefineries that primarily target liquid fuels (e.g., ethanol) is still under investigation. Herein, this review provides a thorough summary of the application of densified biomass in biological-based biorefineries. First, the effects of densification parameters as well as variables of biomass materials on the densified products’ quality are reviewed, and different commonly used densification technologies are also discussed and compared. Then, the discussion focuses on the physiochemical modifications of biomass caused by densification that may influence further pretreatment and/or enzymatic hydrolysis in biorefineries. Industrial pelleting has been generally shown to exhibit positive/neutral effects on the enzymatic hydrolysis of multiple biomass feedstocks after pretreatments, indicating the viability of using pellets as starting feedstocks in biorefineries. Densification causes structural disruption of biomass, which may facilitate further biochemical conversions. Integrating biomass densification in the feedstock supply chain is feasible for large-scale biorefineries to overcome the techno-economic barriers and become profitable. Suggestions are presented for the efficiency enhancement and cost reduction in densification-based biorefineries. To enable wider applications, it is now the time to employ more demo and full-scale activities in different regions of the world pushing the research and innovation of densification integrated within biorefining.

09 BIOMASS FUELS↗
DOE OSTI2025

A comprehensive academic and industrial survey of blockchain technology for the energy sector using fuzzy Einstein decision-making

The global energy sector is undergoing a significant transformation driven by decarbonization and digitalization, leading to the emergence of Distributed Ledger Technology (DLT) — particularly blockchain — as a promising tool for enhancing transparency, security, and efficiency in modern power systems. This study aims to provide a comprehensive academic and industrial survey of blockchain applications in the energy sector and develop a robust decision-making framework to identify and prioritize the most promising real-world use cases based on multidisciplinary criteria. A three-stage methodology was adopted: (i) a literature and market review encompassing over 300 academic publications and commercial blockchain initiatives in energy, (ii) an in-depth evaluation of the evolution and viability of blockchain initiatives in energy with the help of expert surveys, and (iii) a novel decision-making model using a q-rung orthopair fuzzy Multi-Attributive Border Approximation (q-ROF-MABAC) method under the Einstein operator. The results were compared with existing decision models to validate consistency and robustness. Nine key blockchain use case categories were identified and ranked based on technical, economic, and governance dimensions. The results demonstrated that integrating expert insights into a fuzzy logic framework helps filter out overhyped claims in the literature and prioritize realistic and high-impact applications such as green certificates, grid services, and peer-to-peer energy trading. The model’s rankings remained stable across varying weight configurations, confirming the robustness of the methodology. This study provides an evidence-based decision-support tool for researchers, industry stakeholders, and policymakers to better understand, evaluate, and adopt blockchain technologies in the energy sector.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Achieving superior carbon transfer efficiency and pH control using membrane carbonation with a wide range of CO 2 contents for the coccolithophore Emiliania huxleyi

The economic viability of microalgal-derived products relies on rapid CO 2 transfer in a cost-effective manner. Many industrial gas streams contain concentrated CO 2 that, if converted to useful products, would lower greenhouse gas emissions and valorize the wasted CO 2 . Membrane carbonation (MC) uses non-porous hollow-fiber gas-transfer membranes to deliver CO 2 without bubble formation, which makes it possible to achieve a high carbon-transfer efficiency (CTE). However, inert gasses in the industrial streams (e.g., N 2 , O 2 , and H 2 O) can significantly lower the CO 2 -delivery rate. The means to overcome the buildup of inert gases in the membrane lumen is to manage the distal end of the membranes to sweep out inert gases while not wasting significant CO 2 . A MC-venting strategy was evaluated for CO 2 inputs from 5% to 100%. Abiotic tests using a restricted exit flow could achieve >95% CTE abiotic for industrial CO 2 streams. When integrated with semi-continuous cultivation of a marine coccolithophore, Emiliania huxleyi , CO 2 delivery and venting were on-demand based on a pH set points and pH-actuated feed and venting valves. MC using the venting strategy achieved 100% CTE biotic when delivering 100% and 50% CO 2 , which was better than 50% CTE biotic obtained from pH-controlled sparging of 100% CO 2 -sparging. E. huxleyi consistently fixed ~80% of the delivered CO 2 into biomass, and the remaining ~20% to calcite coccoliths. Finally, the compact size of MC modules, stable pH control, and no shear forces from bubble agitation during the CO 2 delivery made MC an ideal match for cultivation of coccolithophores, which are sensitive to shear forces and pH fluctuations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Relationships between maternally-transferred mercury and hatchling development, behavior, and survival in the American alligator ( Alligator mississippiensis )

Mercury is a toxic and pervasive environmental contaminant that can be transferred from mother to offspring during development. Consequences of maternally-transferred mercury have been observed in vertebrate taxa, including reduced clutch viability, reduced offspring size, and behavioral alterations. These sublethal effects have been assumed to decrease survivorship, though this is seldom assessed. Here, we examined how maternally-transferred mercury interacts with incubation temperature to influence reproductive success, offspring behavior, and subsequent survival in the American alligator (Alligator mississippiensis). We collected nine clutches of eggs from a mercury contaminated reservoir on the Savannah River Site, South Carolina, and incubated eggs at either female- or male-promoting temperatures. Clutch-averaged mercury in egg yolk was high relative to other studies in crocodilians and ranged from 0.248 to 0.554 ppm compared to 0.018–0.052 ppm at a site with low levels of mercury contamination; mercury levels in hatchling blood ranged from 0.090 to 0.490 ppm ($\overline{x}$= 0.240 ppm, n = 158). We found few, mostly negligible correlations between life history traits and mercury but noted a positive relationship with egg mass, possibly mediated by correlated maternal effects such as resource provisioning. Incubation temperature exerted strong effects on hatchling phenotypes, with warmer, male-promoting temperatures producing larger and bolder hatchlings. Presumptive females, produced from cooler incubation temperatures, spent more time in warm areas during behavior trials. Hatchlings were released 10–15 days post-hatch and surveyed over eight months to assess survival. Survivorship was positively correlated with hatchling size and negatively correlated with proportional time spent in warm areas. Presumptive females had much lower survival, and overall survivorship for the eight-month period was 0.185–0.208, depending on the modelling approach. Finally, our study suggests that, within the range of concentrations we observed, incubation temperature has a stronger effect on offspring behavior and survival than maternally-transferred mercury pollution in American alligators.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Radionuclide transport in fractured chalk under abrupt changes in salinity

Internationally, it has been agreed that geologic repositories for spent fuel and radioactive waste are considered the internationally agreed upon solution for intermediate and long-term disposal. In countries where traditional nuclear waste repository host rocks (e.g., clay, salt, granite) are not available, other low permeability lithologies must be studied. Here, chalk is considered to determine its viability for disposal. Despite chalk's low bulk permeability, it may contain fracture networks that can facilitate radionuclide transport. In arid areas, groundwater salinity may change seasonally due to the mixing between brackish groundwater and fresh meteoric water. Such salinity changes may impact the radionuclides' mobility. In this study, radioactive U(VI) and radionuclide simulant tracers (Sr, Ce and Re) were injected into a naturally fractured chalk core. The mobility of tracers was investigated under abrupt salinity variations. Two solutions were used: a low ionic strength (IS) artificial rainwater (ARW; IS ~0.002) and a high IS artificial groundwater (AGW; IS ~0.2). During the experiments, the tracers were added to ARW, then the carrier was changed to AGW, and vice versa. Ce was mobile only in colloidal form, while Re was transported as a conservative tracer. Both Re and Ce demonstrated no change in mobility due to salinity changes. In contrast, U and Sr showed increased mobility when AGW was introduced and decreased mobility when ARW was introduced into the core. These experimental results, supported by reactive transport modeling, suggest that saline groundwater solutions promote U and Sr release via ion-exchange and enhance their migration in fractured chalk. Here the study emphasizes the impact of salinity variations near spent fuel repositories and their possible impact on radionuclide mobility.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Marine energy supported multi-energy system planning and operation optimization for sustainable coastal community

The growing need for sustainable energy solutions in coastal areas necessitates the development of integrated systems that leverage abundant marine resources. In this study, a standalone Marine Energy Supported Multi-Energy System (MRE-MES) is designed for sustainable coastal community development, utilizing renewable marine resources, including offshore wind, wave, and solar energy, to address the energy needs of electricity, heat, freshwater, and hydrogen. The proposed MRE-MES incorporates a co-optimization model that simultaneously balances capacity planning and operational efficiency to minimize costs and environmental impacts. The system is tested under different renewable energy penetration levels and demand uncertainties, using a two-stage stochastic programming to account for variability in renewable resources and consumption needs. The experimental results indicate that in the optimal system capacity configuration, the percentage of total renewable energy generation is around 80 %, with or without capacity limitation constraints on PV, water tank, and hydrogen storage. Compared to the worst-case scenario in Monte Carlo experiments, two-stage stochastic optimization results in a more robust decision that effectively mitigates the risks posed by future uncertain demand conditions. In conclusion, the findings highlight the viability of marine energy for providing a resilient, comprehensive energy solution to coastal communities.

Capacity planning↗
DOE OSTI2023

Determination of the regeneration energy of direct air capture solvents/sorbents using calorimetric methods

Regeneration energy and recyclability are important parameters that dictate the viability of a CO 2 direct air capture (DAC) process. In this study, differential scanning calorimetry (DSC) is used in conjunction with thermogravimetric analysis (TGA) and Fourier Transform Infrared Spectroscopy (FTIR) to evaluate the regeneration energy required for CO 2 -loaded 3 M aqueous potassium sarcosinate (K-SAR) solvent and crystalline methyl-glyoxal-bisiminoguanidine (MGBIG) sorbent. Based on calorimetric measurements, for aqueous K-SAR, the sensible heat amounts to 1.5 GJ/tCO 2 and the enthalpy of desorption is estimated at 3.68 GJ/tCO 2 . The total energy of regeneration will also include the enthalpy of solvent vaporization, which will depend on the thermodynamic conditions and the level of regeneration. For MGBIG, the total regeneration energy required was measured at approximately 7.0 GJ/tCO 2 . Further, FTIR measurements were used to observe CO 2 and H 2 O release during the thermal regeneration process. For K-SAR, CO 2 release is seen to take place at temperatures greater than 80 °C and, for MGBIG, the CO 2 release takes place at temperatures greater than 100 °C. The moderate temperatures required for K-SAR and MGBIG regenerations compared to other DAC solvents/sorbents suggest that low-cost sources of heat, such as geothermal heat, could potentially be used for regeneration to drive down the cost of direct air capture.

42 ENGINEERING↗
DOE OSTI2025

Expanding market opportunities: cogeneration strategies for integrated PWR and thermal energy storage systems

We assess the economic viability of nuclear cogeneration by investigating three different modes—fixed dispatch, fully flexible dispatch, and flexible dispatch with minimum heat supply requirements. The analysis focuses on an existing pressurized water reactor (PWR) integrated with thermal energy storage (TES). Heat production costs are estimated under these modes for two U.S. electricity markets: the Electric Reliability Council of Texas (ERCOT) and the Pennsylvania–New Jersey–Maryland Interconnection (PJM). A sensitivity analysis examines profitability at varying heat market prices. Results indicate that fixed heat dispatch inflates heat production costs, often rendering projects economically feasible only at higher heat price levels. Fully-flexible dispatch lowers heat production costs by an average of 43 % compared to fixed dispatch. However, the current 30 % thermal dispatch limit may be insufficient to serve high baseline industrial demands cost‐effectively; higher maximum dispatch rates could enhance project economics. Markets with higher and more volatile electricity prices (e.g., ERCOT) offer greater total energy sales potential (i.e., heat and electricity), but also increase opportunity costs when heat production scheduling restrictions are imposed. In contrast, lower-price, less volatile markets (e.g., PJM) experience smaller impacts from such constraints and provide greater flexibility in accommodating varying cogeneration modes. In conclusion, these findings provide a framework to guide nuclear plant operators in aligning cogeneration strategies with industrial process requirements and electricity market conditions.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Integrated techno-economic framework for nuclear hydrogen production: assessing the role of high temperature steam electrolysis and safety considerations

This manuscript presents a comprehensive techno-economic assessment of nuclear integrated hydrogen production through high-temperature steam electrolysis (HTSE) in the U.S. Gulf Coast region. Given the significant role of hydrogen as an energy carrier and chemical feedstock, the research evaluates the feasibility of co-locating HTSE facilities with existing nuclear power plants (NPPs) to enhance hydrogen production efficiency and cost-effectiveness. Here, the study highlights the advantages of HTSE over traditional low-temperature electrolysis, particularly in leveraging thermal and electrical energy from NPPs. A novel framework for hydrogen deployment is introduced, integrating hydrogen market analysis, techno-economic evaluation (TEA), and safety assessments. The findings underscore the economic viability of hydrogen production in light of current market conditions, including fluctuating natural gas prices and the impact of production tax credits under the Inflation Reduction Act. A case study in the Gulf Coast region demonstrates the potential for strategic hydrogen production to meet growing industrial demand while ensuring safety and regulatory compliance. Overall, this research contributes to the advancement of nuclear integrated hydrogen production as a sustainable energy solution.

08 - HYDROGEN↗
DOE OSTI2021

Efficient prediction of concentrating solar power plant productivity using data clustering

Concentrating solar power (CSP) plants convert solar energy to electricity and can be deployed with a thermal storage capability to shift electricity generation from time periods with available solar resource to those with high electricity demand or electricity price. Rigorous optimization of plant design and operational strategies can improve the market-competitiveness and commercial viability; however, such optimization may require hundreds of annual performance simulations, each of which can be computationally expensive when including considerations such as optimization of dispatch scheduling, sub-hourly time resolution, and stochastic effects due to uncertain weather or electricity price forecasts. This paper proposes a methodology to reduce the computational burden associated with simulation of electricity yield and revenue for CSP plants over a single- or multi-year period. Data-clustering techniques are employed to select a small number of limited-duration time blocks for simulation that, when appropriately weighted, can reproduce generation and revenue over a single year or within each year of a multi-year period. After selection of appropriate data features and weighting factors defining similarity between time-series profiles, the methodology captured annual revenue within 2.3%, 1.7%, or 1.2% using simulation of 10, 30, or 50 three-day exemplar time blocks, respectively, for each of three single-year location/weather/market scenarios and five plant configurations ranging from low to high solar multiple and storage capacity. When applied to multi-year datasets, the proposed methodology can capture inter-year variability that is unavailable from typical meteorological year (TMY) datasets while simultaneously requiring simulation of less than a single year of data.

14 SOLAR ENERGY↗
DOE OSTI2025

PV backsheets survey protocol: A framework for geo-spatial field surveys for bulk material characterization and reliability analysis applied across 41 PV systems

As widespread adoption of photovoltaic (PV) technologies continues, understanding the lifetime of modules is paramount to the viability of the industry as an environmentally conscious alternative to traditional energy generation. Although power degradation can affect the total energy production of a module over its lifetime, module safety failures necessitate the removal of a module leading to a loss of not only the particular asset, but the earning potential of the device. Therefore, it is critical to ensure that the components that provide essential safety functions for PV module operate for their entire rated lifetime. PV backsheets provide necessary electrical insulation to the completed device and failure of this component is cause for a immediate removal of the module. Degradation of the PV module backsheet has led to module safety failures in large-scale installations, costing millions of dollars in damages and lost potential revenue. The spatio-temporal degradation of fielded PV modules is important to study in order to identify which modules within installations are experiencing the greatest exposure conditions and in turn have the highest chance of failure. This paper describes a comprehensive field survey protocol developed for monitoring PV module backsheet performance using solely non-destructive methods in commercial PV fields. The protocol establishes a field naming convention, sampling method, data handling requirements, and measurement procedures. By ensuring consistent data collection practices, the field survey protocol enables research groups to obtain data of uniform quality on backsheet performance over multiple years and locations. In this study, the developed protocol was implemented at forty-one PV sites. Eight different types of airside layer backsheet materials including poly(vinylidene fluoride) (PVDF), acrylic PVDF, poly(tetrafluoroethylene-co-hexafluoropropylene-co-vinylidene fluoride) (THV), poly(vinyl fluoride) (PVF), poly(ethylene terephthalate) (PET), fluoroethylene vinyl ether (FEVE), polyethylene naphthalate (PEN), and glass were identified using attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. The field survey results show that the spatial distribution of degradation indicators are non-uniform within a particular module, individual site, and across site locations. The degradation of PV modules increased in severity for modules mounted at the edge of rows (across a field) and near the junction box (within a module). This study demonstrates the sensitivity of material performance to exposure length across different materials and climates.

14 SOLAR ENERGY↗
DOE OSTI2026

Design of a SiC-Si moving packed-bed particle-to-sCO 2 heat exchanger for high temperature concentrating solar power applications

Particle-based concentrating solar power systems integrated with sCO 2 power cycles offer high thermal efficiencies but require durable heat exchangers to transfer heat from high-temperature particles to the sCO 2 working fluid. Here, this study presents the design and optimization of a silicon carbide-silicon moving packed-bed heat exchanger for fabrication via binder jetting additive manufacturing. The heat exchanger was designed to withstand a 20 MPa sCO 2 pressure and operate at particle inlet temperatures up to 750 °C. The final design features 152 sCO 2 channels distributed across 19 plates, with elliptical corners and a minimum wall thickness of 3 mm. Flow restrictors at the sCO 2 channel inlets significantly improved flow uniformity, reducing thermal stresses and achieving a structural reliability of 99 % under representative operating conditions. The heat exchanger delivers a thermal duty of 9 kW and a volumetric power density of approximately 1 MW/m 3 in the channel region. Sensitivity studies confirmed the heat exchanger’s robustness under varying operating conditions, demonstrating its viability as a high-performance alternative to metallic heat exchangers for particle-based high-temperature concentrating solar power applications.

Barua, Bipul [Argonne National Laboratory (ANL), A↗