Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Nonlinear transient analysis of joint dominated structures

A residual force technique is presented that can perform the transient analyses of large, flexible, and joint dominated structures. The technique permits substantial size reduction in the number of degrees of freedom describing the nonlinear structural models and can account for such nonlinear joint phenomena as free-play and hysteresis. In general, joints can have arbitrary force-state map representations but these are used in the form of residual force maps. One essential feature of the technique is to replace the arbitrary force-state maps describing the nonlinear joints with residual force maps describing the truss links. The main advantage of this replacement is that the incrementally small relative displacements and velocities across a joint are not monitored directly thereby avoiding numerical difficulties. Instead, very small and 'soft' residual forces are defined giving a numerically attractive form for the equations of motion and thereby permitting numerically stable integration algorithms. The technique was successfully applied to the transient analyses of a large 58 bay, 60 meter truss having nonlinear joints. A method to perform link testing is also presented.

Chapman, J. M.↗

Consequences of experimental transient rheology

Recent analyses of transient creep data for lower crustal and upper mantle substances are used to constrain the viscosity contrast across the 670 km discontinuity, and a 4-layer earth model in which both upper and lower mantles are described by a Burgers body rheology is assumed. Results indicate that the previously inferred viscosity variations would be reduced by a factor of ten using the new transient models. This result is in agreement with a revised viscosity estimate based on long-wavelength geoid anomalies and seismic tomography. Time-dependent perturbations to the gravity field from recent ice movements are shown to be significant.

Sabadini, Roberto↗

An Investigation of the Ability to Recover from Transients Following Failures for Single-Pilot Rotorcraft

A moving-base simulation was conducted to investigate a pilot's ability to recover from transients following single-axis hard-over failures of the flight-control system. The investigation was performed in conjunction with a host simulation that examined the influence of control modes on a single pilot's ability to perform various mission elements under high-workload conditions. The NASA Ames large-amplitude-motion Vertical Motion Simulator (VMS) was utilized, and the experimental variables were the failure axis, the severity of the failure, and the airspeed at which the failure occurred. Other factors, such as pilot workload and terrain and obstacle proximity at the time of failure, were kept as constant as possible within the framework of the host simulation task scenarios. No explicit failure warnings were presented to the pilot. Data from the experiment are shown, and pilot ratings are compared with the proposed handling-qualities requirements for military rotorcraft. Results indicate that the current proposed failure transient requirements may need revision.

Mansur, M. Hossein↗

Measurement of local high-level, transient surface heat flux

This study is part of a continuing investigation to develop methods for measuring local transient surface heat flux. A method is presented for simultaneous measurements of dual heat fluxes at a surface location by considering the heat flux as a separate function of heat stored and heat conducted within a heat flux gage. Surface heat flux information is obtained from transient temperature measurements taken at points within the gage. Heat flux was determined over a range of 4 to 22 MW/sq m. It was concluded that the method is feasible. Possible applications are for heat flux measurements on the turbine blade surfaces of space shuttle main engine turbopumps and on the component surfaces of rocket and advanced gas turbine engines and for testing sensors in heat flux gage calibrators.

Liebert, Curt H.↗

Finite element analysis of steady and transiently moving/rolling nonlinear viscoelastic structure. I - Theory

In a three-part series of papers, a generalized finite element analysis scheme is developed to handle the steady and transient response of moving/rolling nonlinear viscoelastic structure. This paper considers the development of the moving/rolling element strategy, including the effects of large deformation kinematics and viscoelasticity modeled by fractional integrodifferential operators. To improve the solution strategy, a special hierarchical constraint procedure is developed for the case of steady rolling/translating, as well as a transient scheme involving the use of a Grunwaldian representation of the fractional operator.

Padovan, Joe↗

Transient radiative cooling of a layer filled with solidifying drops

An analysis is carried out for radiative cooling of a plane layer initially filled with liquid drops that solidify and then continue to cool by loss of sensible heat. This is in connection with a proposed lightweight radiator system for heat dissipation in space. Hot liquid drops would be ejected and then cooled by direct exposure in space; they would then pass into a collector for reuse. The cooling analysis contains three transient zones. In the first, the drops cool by losing latent heat until the outermost drops become solid. Then the cooling continues by loss of both latent and sensible heat. A similarity behavior is eventually achieved in which the transient emittance of the layer depends only on the optical thickness.

Siegel, R.↗

Transient response of joint dominated space structures - A new linearization technique

The linearization method presented for calculating the transient responses of nonlinear systems due to initial disturbances is an extension of the 'describing function' approach, in which the system's steady-state response is calculated by representing such nonlinear elements as space structure joints with impedances that are functions of response amplitude. It is shown that, for the transient case, the steady-state impedances can be averaged over the range of responses in order to furnish equivalent values of stiffness and damping; these, for a given set of initial displacements, may be treated as constant during calculations of system response.

Foelsche, G. A.↗

Forward-reverse shock pairs associated with transient disturbances in the solar wind at 1 AU

Using color-coded plots of the ISEE-3 solar wind electron data and magnetic field data from ISEE-3 for the period from August 1978 through February 1980, evidence was obtained on two transient disturbances which contained reverse shocks in addition to forward shocks. These disturbances are considered to be associated with coronal mass ejections (CMEs). In the stronger of the two disturbances, the reverse shock was found within the CME and was separated from the forward shock by about 0.2 AU; the pressure between the two shocks was nearly constant. In the weaker disturbance, the reverse shock propagated entirely through the CME, trailing the forward shock by about 0.3-0.4 AU; the pressure between the shocks declined substantially and monotonically. Each disturbance profile can be compared favorably with one of the simple one-dimensional fluid simulations used by Hundhausen (1985) to illustrate the general principles underlying transient disturbance propagation in the solar wind.

Gosling, J. T.↗

Mars global atmospheric oscillations - Annually synchronized, transient normal-mode oscillations and the triggering of global dust storms

Transient events of an unusual character have been discovered in the daily pressure variations of the Mars atmosphere's pressure at the planetary surface which last only a few Martian days, appear to repeat on an annual basis, cover a large part of the given day's hemisphere, occur in pairs separated by 20-days in some cases, and coincide with the annual pressure minimum. They also consist of spectral components nearly identical in frequency with diurnal and semidiurnal harmonics. It is presently suggested that these events are Kelvin, normal-mode, transient, global oscillations. An almost-diurnal and an almost-semidiurnal high-frequency global oscillation distinct from solar-driven tides may be common on Mars.

Tillman, James E.↗

Transient natural convection heat and mass transfer in crystal growth

A numerical analysis of transient combined heat and mass transfer across a rectangular cavity is performed by a numerical method based on the SIMPLE algorithm. The physical parameters are selected to represent a range of possible crystal growth in solutions. Numerical results are compared with available experimental data to confirm the accuracy of the results. Good qualitative agreements are obtained for the average mass transfer rate across the cavity. Also, qualitative agreements are observed for the global development of thermal and solute fields. It is found that the thermal and solute fields become highly oscillatory when the thermal and solute Grashof numbers are large. Oscillations are probably caused by a number of different instability mechanisms. By reducing the gravity some of these instabilities were made to disappear at the lower Grashof numbers. Transient temperature and solute distribution near the crystal growing surface are highly non-uniform at the higher Grashof numbers. These non-uniformities are less severe in the reduced gravity environments but still exist. The effects of convection on the rate of average mass transfer are more than one order of magnitude higher than those of conduction in the range of Grashof numbers studied. Dependency of mass transfer rate on the Grashof number indicates that the convection effects many not be negligible even in the microgravity environments for the range of parameters investigated.

Han, Samuel S.↗

Transient flow thrust prediction for an ejector propulsion concept

A method for predicting transient thrust augmenting ejector characteristics is introduced. The analysis blends classic self-similar turbulent jet descriptions with a mixing region control volume analysis to predict transient effects in a new way. Details of the theoretical foundation, the solution algorithm, and sample calculations are given.

Drummond, Colin K.↗

Transient hot-film sensor response in a shock tube

Shock tube experiments were performed to determine the response of a hot-film sensor, mounted flush on the side wall of a shock tube, to unsteady flow behind a normal shock wave. The present experiments attempt to isolate the response of the anemometer due only to the change in convective heat transfer at the hot-film surface. The experiments, performed at low supersonic shock speeds in air, are described along with the data acquisition procedure. The change in convective heat transfer is deduced from the data and the results are compared with those from transient boundary layer theory and another set of experimental results. Finally, a transient local heat transfer coefficient is formulated for use as the forcing function in a hot-film sensor instrument model simulation.

Roberts, A. S., Jr.↗

Transient performance evaluation of an integrated heat pipe-thermal storage system

Transient performance tests of an integrated heat pipe-thermal storage system have been conducted. This system was developed as a part of an Organic Rankine Cycle-Solar Dynamic Power System receiver for future power systems. The integrated system consists of potassium heat pipe elements that incorporate thermal energy storage canisters within the vapor space and an organic fluid (toluene) heater tube used as the condenser region of the heat pipe. The transient performance tests determined the operating characteristics and power input limits of the integrated heat pipe-thermal storage unit under conditions corresponding to re-acquisition of the sun during emergence from eclipse conditions and to the initial start-up of the solar dynamic power system. The tests demonstrated that the heat pipe-thermal storage element is not limited under conditions corresponding to emergence from eclipse during normal orbital operations and the heat pipe will successfully start-up from the frozen condition with full input power at the onset. Details of the test procedures and results of the tests are presented in this paper.

Keddy, E.↗

The separated flow field on a slender wing undergoing transient pitching motions

The flow field surrounding a delta wing undergoing a transient pitching motion was studied experimentally. Of particular importance was the location of the leading edge vortices over the surface of the wing. The study was conducted on a 70-deg sweep flat-plate delta wing pitched about its one-half chord position. It is found that the maximum pitch rate is the key factor involved in the amount of lag experienced by the vortex breakdown during the transient pitching motion.

Thompson, S. A.↗

On the onset of eruptive prominences and coronal transients

During the Maximum Year, preflare and preeruptive phenomena have been observed which give a new idea on the association of eruptive prominences and coronal transients. The propagation of a C IV brightening through a prominence is related to the onset of a MHD wave. It is followed by the activation of the prominence and its eruption some two hours later. A coronal transient is observed above 1.6 R(s). It is argued that the eruption of the prominence is the result of perturbations in the magnetic field configuration initiated by the MHD waves. The consequence would be that more generally the primary initiation of the ruption may happen up to several hours before the rise of the prominence.

Simon, G.↗

Transient oxidation of single-crystal beta-NiAl

The transient oxidation of beta-NiAl in air at 800 C and 1100 C has been studied using electron microscopy. The oxide scale consists predominantly of metastable Al2O3 phases. Theta-Al2O3 is the major oxide phase within 10.0 hr of oxidation at 800 C and 0.1 hr at 1100 C. The scales form epitaxially on (001) sub beta and (012) sub beta specimens throughout the transient stage, whereas the degree of preferred oxide orientation decreases with oxidation time on (011) sub beta and (111) sub beta specimens. The orientation relationships reflect the small mismatch between parallel close-packed directions in the metal and in the cation sublattice of the oxides. The correlation of distinctive oxide surface morphologies with internal structural defects indicates the strong tendency of the Al2O3 scale to grow via short-circuit diffusion paths.

Doychak, J.↗

Disk-instability model for soft-X-ray transients containing black holes

Consideration is given to the time-dependent behavior of the accretion disks in low-mass X-ray binaries as a model for soft X-ray transients. The thermal stability and vertical structure properties of the disk are studied in the range between 10 to the 7th and 10 to the 8th cm. An Eulerian time-dependent thin disk model is used to show that, for relevant accretion rates, the disk suffers a thermal instability leading to intermittent accretion onto the central compact object. The disk instability model reproduces the basic features of outbursts of soft X-ray transients. Also, the physical state of quiescence of the binary A0620-00 is examined, focusing on the possible existence of a black hole. It is suggested that the modulation of the accretion flow in the inner disk may be responsible for the bimodal behavior observed in the spectra of black hole candidates such as Cyg X-1, GX 339-4, and A0620-00.

Mineshige, Shin↗

Transient flow thrust prediction for an ejector propulsion concept

A method for predicting transient thrust augmenting ejector characteristics is introduced. The analysis blends classic self-similar turbulent jet descriptions with a mixing region control volume analysis to predict transient effects in a new way. Details of the theoretical foundation, the solution algorithm, and sample calculations are given.

Drummond, C.↗