Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THICKNESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

An investigation on the effect of second-order additional thickness distributions to the upper surface of an NACA 64-206 airfoil

An investigation was conducted on a CDC 7600 digital computer to determine the effects of additional thickness distributions to the upper surface of an NACA 64-206 airfoil. Additional thickness distributions employed were in the form of two second-order polynomial arcs which have a specified thickness at a given chordwise location. The forward arc disappears at the airfoil leading edge, the aft arc disappears at the airfoil trailing edge. At the juncture of the two arcs, x = x, continuity of slope is maintained. The effect of varying the maximum additional thickness and its chordwise location on airfoil lift coefficient, pitching moment, and pressure distribution was investigated. Results were obtained at a Mach number of 0.2 with an angle-of-attack of 6 degrees on the basic NACA 64-206 airfoil, and all calculations employ the full potential flow equations for two dimensional flow. The relaxation method of Jameson was employed for solution of the potential flow equations.

Merz, A. W.↗
NASA NTRS1976

Measurement of lake ice thickness with a short-pulse radar system

Measurements of lake ice thickness were made during March 1975 at the Straits of Mackinac by using a short-pulse radar system aboard an all-terrain vehicle. These measurements were compared with ice thicknesses determined with an auger. Over 25 sites were explored which had ice thicknesses in the range 29 to 60 cm. The maximum difference between radar and auger measurements was less than 9.8 percent. The magnitude of the error was less than + or - 3.5 cm. The NASA operating short-pulse radar system used in monitoring lake ice thickness from an aircraft is also described.

Cooper, D. W.↗
NASA NTRS1976

Steady incompressible variable thickness shear layer aerodynamics

A shear flow aerodynamic theory for steady incompressible flows is presented for both the lifting and non lifting problems. The slow variation of the boundary layer thickness is considered. The slowly varying behavior is treated by using multitime scales. The analysis begins with the elementary wavy wall problem and, through Fourier superpositions over the wave number space, the shear flow equivalents to the aerodynamic transfer functions of classical potential flow are obtained. The aerodynamic transfer functions provide integral equations which relate the wall pressure and the upwash. Computational results are presented for the pressure distribution, the lift coefficient, and the center of pressure travel along a two dimensional flat plate in a shear flow. The aerodynamic load is decreased by the shear layer, compared to the potential flow. The variable thickness shear layer decreases it less than the uniform thickness shear layer based upon equal maximum shear layer thicknesses.

Chi, M. R.↗
NASA NTRS1976

Thickness of magnetic structures associated with the earth's bow shock

The thickness of magnetic structures associated with quasi-perpendicular bow shocks has been observed to vary over more than 2 orders of magnitude. In this paper, a criterion is employed which states that the magnetic structure of perpendicular shocks adjusts itself to keep electrostatic waves excited by the relative drift of electrons and ions at marginal stability. The marginal stability boundary and measured plasma parameters are used to calculate the expected thickness of bow-shock magnetic structures. The calculated and measured thicknesses are compared and found to be in good agreement over a range from less than 10 km to greater than 500 km. The conclusion is that the thickness of magnetic structures associated with quasi-perpendicular bow shocks is determined primarily by dissipation due to electron-ion streaming instabilities rather than by dispersive effects.

Morse, D. L.↗
NASA NTRS1976

Passive microwave mapping of ice thickness

Basic calculations are presented for evaluating the feasibility of a scanning microwave radiometer system for mapping the thickness of lake ice. An analytical model for the apparent brightness temperature as a function of ice thickness has been developed, and elaborated to include such variables as galactic and atmospheric noise, aspect angle, polarization, temperature gradient in the ice, the presence of transition layers such as snow, slush, and water, increased loss due to air inclusions in the ice layer, and the presence of multiple ice thicknesses within the antenna footprint. It was found that brightness temperature measurements at six or seven frequencies in the range of 0.4 to 0.7 GHz were required to obtain unambiquous thickness estimates. A number of data processing methods were examined. The effects of antenna beamwidth, scanning rate, receiver bandwidth, noise figure, and integration time were studied.

Apinis, J. J.↗
NASA NTRS1977

Comparison of orbital chemistry with crustal thickness and lunar sample chemistry

A correlation between orbital chemistry (FeO, Al2O3, Mg/Al, MgO/FeO, Th) and the lunar crustal thickness is examined. The correlation suggests either lack of complete homogenization by lateral or vertical mixing, or lateral variation in the differentiation process. In addition, links between orbital chemistry and lunar sample chemistry are investigated. In regions with crustal thickness between 100 and 110 km, gabbroic anorthosites are very abundant, while in regions with crustal thickness of about 80 km anorthositic gabbros are frequent. Special attention is given to the distribution of low-potassium Fra Mauro basalt, found in high concentrations in regions with 50 to 60 km crustal thickness.

Schonfeld, E.↗
NASA NTRS1978

Sonic-box method employing local Mach number for oscillating wings with thickness

A computer program was developed to account approximately for the effects of finite wing thickness in the transonic potential flow over an oscillating wing of finite span. The program is based on the original sonic-box program for planar wing which was previously extended to include the effects of the swept trailing edge and the thickness of the wing. Account for the nonuniform flow caused by finite thickness is made by application of the local linearization concept. The thickness effect, expressed in terms of the local Mach number, is included in the basic solution to replace the coordinate transformation method used in the earlier work. Calculations were made for a delta wing and a rectangular wing performing plunge and pitch oscillations, and the results were compared with those obtained from other methods. An input quide and a complete listing of the computer code are presented.

Ruo, S. Y.↗
NASA NTRS1980

Effects of substrate deformation and sip thickness on tile/sip interface stresses for shuttle thermal protection

A nonlinear analysis was used to study the effects of substrate deformation characteristics and strain isolator pad (SIP) thickness on TILE/SIP interface stresses for the space shuttle thermal protection system. The configuration analyzed consisted of a 5.08 cm thick, 15.24 cm square tile with a 12.7 cm square SIP footprint bordered by a 1.27 cm wide filler bar and was subjected to forces and moments representative of a 20.7 kPa aerodynamic shock passing over the tile. The SIP stress deflection curves were obtained after a 69 kPa proof load and 100 cycles conditioning at 55 kPa. The TILE/SIP interface stresses increase over flat substrate values for zero to peak substrate deformation amplitudes up to 0.191 cm by up to a factor of nearly five depending on deformation amplitude, half wave length, and location. Stresses for a 0.23 cm thick SIP found to be up to 60 percent greater than for a 0.41 cm thick SIP for identical loads and substrate deformation characteristics. A simplified method was developed for approximating the substrate location which produces maximum TILE/SIP interface stresses.

Shore, C. P.↗
NASA NTRS1981

A comparison of the height distributions of solar flare hard X-rays in thick target and thermal models

Using recent observations of solar hard X-ray bursts having a spatial resolution of a few arcsec, a computation is made of the theoretically predicted spatial variation of hard X-ray flux versus height in both thick target nonthermal and thermal models of solar hard X-ray bursts. The work on the thick target model revises previous results in this area by adopting a more realistic model for the flaring atmospheric structure and also by taking into account energy loss and scattering processes in the evolution of the nonthermal electron beam which have previously been neglected. It is noted that in the so-called 'thermal' model currently in vogue there is a substantial nonthermal bremsstrahlung component at all photon energies; it is further demonstrated that this nonthermal component results in a hard X-ray flux versus height distribution whose maximum brightness per unit length is, similarly to the thick target model, located in the chromosphere and not in the thermal source itself. The characteristics of the hard X-ray height distributions in both thick target and thermal models are summarized and compared.

Emslie, A. G.↗
NASA NTRS1981

Effects of artificially produced defects on film thickness distribution in sliding EHD point contacts

The effects of artificially produced dents and grooves on the elastohydrodynamic (EHD) film thickness profile in a sliding point contact were investigated by means of optical interferometry. The defects, formed on the surface of a highly polished ball, were held stationary at various locations within and in the vicinity of the contact region while the disk was rotating. It is shown that the defects, having a geometry similar to what can be expected in practice, can dramatically change the film thickness which exists when no defects are present in or near the contact. This change in film thickness is mainly a function of the position of the defects in the inlet region, the geometry of the defects, the orientation of the defects in the case of grooves, and the depth of the defect relative to the central film thickness.

Cusano, C.↗
NASA NTRS1981

The effects of artificially-produced defects on the film thickness distribution in sliding EHD point contacts

Effects of artificially produced dents and grooves on the elastohydrodynamic film thickness profile in a sliding point contact are investigated using optical interferometry. Defects on the surface of a highly polished ball are held stationary at various locations within the vicinity of the contact region while the disk is rotating. It is shown that defects can dramatically change the film thickness which exists when no defects are present in or near the contact, and it is shown that the change in thickness is mainly a function of the position of the defects in the inlet region, the geometry of the defects, the orientation of the defects in the case of grooves, and the depth of the defect relative to the central film thickness.

Cusano, C.↗
NASA NTRS1980

Estimation of the thickness of the Tharsis lava flows and implications for the nature of the topography of the Tharsis plateau

An attempt to estimate the thickness of the volcanics which cover the large part of the Tharsis region is reported. Estimates for the thickness of the flows were made using the numerous occurrences of the partially buried craters throughout the region and a relation between the crater diameter and crater rim height. Estimates were made along the southern contact with the heavily cratered terrain in the Phoenicis Lacus and Memnonia quadrangles, and along the northeast contact with older plains units in the Tharsis and Lunae Palus quadrangles. In these distal regions the thickness estimates range from 0 to 600-700 m of lava. This would indicate that only 20-30% of the topography is the result of volcanic construction. If the 20-30% estimate is representative of Tharsis as a whole then lava thickness would reach only 2-3 km near the center of the region. Thus only a small fraction of the topography presently observed can be attributed to units readily identifiable as volcanic. This additional evidence indicates that the model for Tharsis of a pre-existing elevated region of heavily cratered crust, capped by a veneer of volcanics is correct.

Plescia, J. B.↗
NASA NTRS1982

The thickness of the magnetopause current layer - ISEE 1 and 2 observations

ISEE 1 and 2 magnetometer data over the dayside magnetosphere are analyzed to present a global survey of the magnetopause thickness. It is shown that earlier magnetopause velocities have been somewhat underestimated, with results indicating constant rapid and irregular motion and velocities ranging from 10-80 km/s in 80% of the cases. The magnetopause thickness is found to be between 400-1000 km, with larger thicknesses also observed, and the thickness does not seem to depend on the orientation of the magnetosheath magnetic field, but does appear to be ordered by dipole magnetic latitude so that the magnetopause current sheet is thinnest near the magnetic equator, which suggests that reconnection is initiated in the equatorial regions rather than in the polar cusps.

Berchem, J.↗
NASA NTRS1982

Film thickness measurement for spiral groove and Rayleigh step lift pad self-acting face seals

One Rayleigh step lift pad and three spiral groove self-acting face seal configurations were tested to measure film thickness and frictional torque as a function of shaft speed. The seals were tested at a constant face load of 73 N (16.4 lb) with ambient air at room temperature and atmospheric pressure as the fluid medium. The test speed range was from 7000 to 17,000 rpm. The measured film thickness was compared with theoretical data from mathematical models. The mathematical models overpredicted the measured film thickness at the lower speeds of the test speed range and underpredicted the measured film thickness at the higher speeds of the test speed range.

Dirusso, E.↗
NASA NTRS1982

Development of technologies for welding interconnects to fifty-micron thick silicon solar cells

A program was conducted to develop technologies for welding interconnects to 50 microns thick, 2 by 2 cm solar cells. The cells were characterized with respect to electrical performance, cell thickness, silver contact thickness, contact waviness, bowing, and fracture strength. Weld schedules were independently developed for each of the three cell types and were coincidentally identical. Thermal shock tests (100 cycles from 100 C to -180 C) were performed on 16 cell coupons for each cell type without any weld joint failures or electrical degradation. Three 48 cell modules (one for each cell type) were assembled with 50 microns thick cells, frosted fused silica covers, silver clad Invar interconnectors, and Kapton substrates.

Patterson, R. E.↗
NASA NTRS1982

Martian volcanic materials - Preliminary thickness estimates in the eastern Tharsis region

Mars displays a variety of volcanic materials from high standing constructs to smooth plains. These materials are evaluated in terms of their susceptibility to thickness determination, and a representative area is analyzed. The Martian ridged plains are much like lunar maria in both surface expression and apparent mode of emplacement. Flooded craters within the ridged plains materials provide an estimate of the thickness distribution. In the Tharsis region, ridged plains materials occur as part of the layered sequence on the east flank of the Tharsis dome. Partially buried craters indicate that the ridged plains materials range from zero meters thick at their eastern limit to over 1.5 km thick westward on the flank of the dome where they are overlain by younger materials. These materials are responsible for only a small portion of the total relief of the Tharsis dome.

De Hon, R. A.↗
NASA NTRS1985

Measuring Rind Thickness on Polyurethane Foam

Nondestructive test determines rind thickness of polyurethane foam. Surface harness of foam measured by Shore durometer method: hardness on Shore D scale correlates well with rind thickness. Shore D hardness of 20, for example, indicates rind thickness of 0.04 inch (1 millimeter). New hardness test makes it easy to determine rind thickness of sample nondestructively and to adjust fabrication variables accordingly.

Johnson, C.↗
NASA NTRS1983

The effects of laminate thickness on the fracture behavior of composite laminates

The relationship between both fracture toughness and the development of crack-tip damage as a function of specimen thickness was investigated. Fracture toughness was determined experimentally using center-cracked tension specimens for (0/plus or minus 45/90)ns and (0/90)ns laminates, where ns means multiple layers with the same repeated sequence and symmetric about the midplane. Laminate thicknesses ranged from 8 plies to 96 plies. As with isotropic metals, fracture toughness was found to decrease with increasing specimen thickness and asymptotically approached a lower bound. The crack tip damage in the (0/plus or minus 45/90)ns laminate does not appear to be a function of thickness. However, there are differences in the damage of the (0/90)2s and (0/90)8s laminates and associated differences in fracture toughness.

Harris, C. E.↗