Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMONUCLEAR DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Characteristics of coherent population trapping in multilevel systems for magnetometry in plasma research

An analysis is presented of the feasibility of measurements of local poloidal magnetic fields in toroidal magnetic fusion devices using coherent population trapping (CPT) in hydrogen-like probing atoms. A measurement scheme is examined in which CPT suppresses the resonance fluorescence from a probing beam of light neutrals with Zeeman-split levels. Feasibility requirements for CPT in three- and five-level systems are discussed. As a result, a theory of CPT-based magnetometry is developed for a system significantly more complex than the conventional three-level {Lambda} system. A theoretical analysis shows that this technique can be used to measure a local safety factor in a toroidal device to an accuracy of a few percent.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge localized linear ideal magnetohydrodynamic instability studies in an extended-magnetohydrodynamic code

A linear benchmark between the linear ideal MHD stability codes ELITE [H. R. Wilson et al., Phys. Plasmas 9, 1277 (2002)], GATO [L. Bernard et al., Comput. Phys. Commun. 24, 377 (1981)], and the extended nonlinear magnetohydrodynamic (MHD) code, NIMROD [C. R. Sovinec et al.., J. Comput. Phys. 195, 355 (2004)] is undertaken for edge-localized (MHD) instabilities. Two ballooning-unstable, shifted-circle tokamak equilibria are compared where the stability characteristics are varied by changing the equilibrium plasma profiles. The equilibria model an H-mode plasma with a pedestal pressure profile and parallel edge currents. For both equilibria, NIMROD accurately reproduces the transition to instability (the marginally unstable mode), as well as the ideal growth spectrum for a large range of toroidal modes (n=1-20). The results use the compressible MHD model and depend on a precise representation of 'ideal-like' and 'vacuumlike' or 'halo' regions within the code. The halo region is modeled by the introduction of a Lundquist-value profile that transitions from a large to a small value at a flux surface location outside of the pedestal region. To model an ideal-like MHD response in the core and a vacuumlike response outside the transition, separate criteria on the plasma and halo Lundquist values are required. For the benchmarked equilibria the critical Lundquist values are 10{sup 8} and 10{sup 3} for the ideal-like and halo regions, respectively. Notably, this gives a ratio on the order of 10{sup 5}, which is much larger than experimentally measured values using T{sub e} values associated with the top of the pedestal and separatrix. Excellent agreement with ELITE and GATO calculations are made when sharp boundary transitions in the resistivity are used and a small amount of physical dissipation is added for conditions very near and below marginal ideal stability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of rotation and viscous heating on the interpretation of experimental heat diffusivities in the edge pedestal

A formalism is presented for evaluating the effect of plasma rotation, via viscous heating, on the interpretation of thermal conductivities from measured temperature and density gradients in the edge pedestal. An application to a H-mode DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)] discharge indicates that the effect could be significant.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fluid and drift-kinetic description of a magnetized plasma with low collisionality and slow dynamics orderings. I. Electron theory

A closed theoretical model to describe slow, macroscopic plasma processes in a fusion-relevant collisionality regime is set forward. This formulation is a hybrid one, with fluid conservation equations for particle number, momentum and energy, and drift-kinetic closures. Intended for realistic application to the core of a high-temperature tokamak plasma, the proposed approach is unconventional in that the ion collisionality is ordered lower than in the ion banana regime of neoclassical theory. The present first part of a two-article series concerns the electron system, which is still equivalent to one based on neoclassical electron banana orderings. This system is derived such that it ensures the precise compatibility among the complementary fluid and drift-kinetic equations, and the rigorous treatment of the electric field and the Fokker-Planck-Landau collision operators. As an illustrative application, the special limit of an axisymmetric equilibrium is worked out in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Absorption of lower hybrid waves in the scrape off layer of a diverted tokamak

The goal of the Lower Hybrid Current Drive (LHCD) system on the Alcator C-Mod tokamak [Hutchinson et al., Phys. Plasmas 1, 1511 (1994)] is to investigate current profile control under plasma conditions relevant to future tokamak experiments. Experimental observations of a LHCD ''density limit'' for C-Mod are presented in this paper. Bremsstrahlung emission from relativistic fast electrons in the core plasma drops suddenly above line averaged densities of 10{sup 20} m{sup -3} ({omega}/{omega}{sub LH{approx}}3-4), well below the density limit previously observed on other experiments ({omega}/{omega}{sub LH{approx}}2). Electric currents flowing through the scrape off layer (SOL) between the inner and outer divertors increase dramatically across the same density range that the core bremsstrahlung emission drops precipitously. These experimental x-ray data are compared to both conventional modeling, which gives poor agreement with experiment above the density limit and a model including collisional absorption in the SOL, which dramatically improves agreement with experiment above the observed density limit. These results show that strong absorption of LH waves in the SOL is possible on a high density tokamak and the SOL must be included in simulations of LHCD at high density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mexican contribution to ALICE and first data analysis

On November 2009 the Large Hadron Collider produced the first p+p collisions. These, together with the upcoming Pb+Pb data, open up the possibility to answer some of the intriguing questions regarding the Standard Model and likely bring to light new phenomena. In this work I present a short review of the mexican participation in the ALICE experiment, focusing on the detector building and phenemological as well as Monte Carlo simulation work regarding the proton as well as the heavy ion program. I also briefly mention some of the wide spectrum of possible first topics that can be analyzed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Impurity dynamics in the presence of transport barriers in tokamaks

Impurity transport in tokamak core plasmas is investigated with a three-dimensional global fluid code. The diffusion coefficient and the pinch velocity of impurity transport in tokamaks are studied using the fluid model for ion temperature gradient and trapped electron mode driven turbulence in tokamak plasmas. It is shown that in the presence of an internal transport barrier created by a reversed magnetic shear configuration or external ExB shear flow, a reversal of impurity pinch velocity is obtained, which changes from inward direction to outward direction. This scenario is favorable for expelling impurities from the central region and decontaminating the core plasma. The pinch reversal is attributed to a change of sign of the curvature pinch velocity. This modification is mostly due to the reversal of magnetic shear for the hollow q profile. When a strong ExB shear flow is externally imposed, it is rather due to a change of the turbulence mean phase velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Zonal flow modes in a tokamak plasma with dominantly poloidal mean flows

The zonal flow eigenmodes in a tokamak plasma with dominantly poloidal mean flows are theoretically investigated. It is found that the frequencies of both the geodesic acoustic mode and the sound wave increase with respect to the poloidal Mach number. In contrast to the pure standing wave form in static plasmas, the density perturbations consist of a standing wave superimposed with a small amplitude traveling wave in the poloidally rotating plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identified particle studies at the LHC with the ALICE experiment

In this article, we discuss the first results from the analysis of pp collisions at LHC energies with the ALICE detector. We concentrate on the studies of identified particles, with a focus on the detector performance and the baryon transport analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Flywheel induction motor-generator for magnet power supply in small fusion device

A flywheel motor-generator (MG) for the toroidal field (TF) coils of a small fusion device was developed which utilizes a commercially available squirrel-cage induction motor. Advantages of the MG are comparably-long duration, quick power response, and easy implementation of power control compared with conventional capacitor-type power supply. A 55-kW MG was fabricated, and TF coils of a small fusion device were energized. The duration of the current flat-top was extended to 1 s which is much longer than those of conventional small devices (around 10–100 ms).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of pellet-triggered MHD events in the ASDEX upgrade

In order to gain deeper insight into the process of MHD activity triggered by pellets we extended our previous analysis (standard type-I edge localized modes (ELMs)) to type-I ELMs in radiative edge scenarios, type-III ELMs, the quiescent H-mode regime, and core mode activity such as neoclassical tearing modes or snakes. Pellet triggering of mode activity has turned out to be a quite general feature, but only in case of the ELMs can it be unambiguously attributed to prompt local impact by the pellet. For edge plasma conditions characterized by higher resistivity, the growth time of spontaneous ELMs increases while the plasma changes from the type-I into the type-III regime. However, pellet-triggered ELMs retain fast rise times. In the quiescent Hmode, pellets still trigger ELM-like mode activity, but no longer accompanied by a significant release of energy from the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of drift-resistive ballooning turbulence in the presence of the GA mode in the plasma edge tokamak

Drift-resistive ballooning turbulence is simulated numerically based on a quasi-three-dimensional computer code for solving nonlinear two-fluid MHD equations in the scrape-off layer plasma in a tokamak. It is shown that, when the toroidal geometry of the magnetic field is taken into account, additional (geodesic) flux terms associated with the first poloidal harmonic ({approx}sin{theta}) arise in the averaged equations for the momentum, density, and energy. Calculations show that the most important of these terms is the geodesic momentum flux (the Stringer-Windsor effect), which lowers the poloidal rotation velocity. It is also shown that accounting for the toroidal field geometry introduces experimentally observed, special low-frequency MHD harmonics-GA modes-in the Fourier spectra. GA modes are generated by the Reynolds turbulent force and also by the gradient of the poloidally nonuniform turbulent heat flux. Turbulent particle and heat fluxes are obtained as functions of the poloidal coordinate and are found to show that, in a tokamak, there is a 'ballooning effect' associated with their maximum in the weak magnetic field region. The dependence of the density, temperature, and pressure on the poloidal coordinate is presented, as well as the dependence of turbulent fluxes on the toroidal magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A simple model of intrinsic rotation in high confinement regime tokamak plasmas

A simple unified model of intrinsic rotation and momentum transport in high confinement regime (H-mode) tokamak plasmas is presented. Motivated by the common dynamics of the onset of intrinsic rotation and the L-H transition, this simple model combines ExB shear-driven residual stress in the pedestal with a turbulent equipartition pinch to yield rotation profiles. The residual stress is the primary mechanism for buildup of intrinsic rotation in the H-mode pedestal, while the pinch drives on-axis peaking of rotation profiles. Analytical estimates for pedestal flow velocities are given in terms of the pedestal width, the pedestal height, and various model parameters. The predicted scaling of the toroidal flow speed with pedestal width is found to be consistent with the International Tokamak Physics Activity database global scaling of the flow speed on-axis with the total plasma stored energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toroidal kinetic eta{sub i}-mode study in reversed-field pinch plasmas

The ion temperature gradient (ITG) driven electrostatic modes in reversed-field pinch (RFP) plasma are studied with the gyrokinetic integral equation. A systematic threshold study is carried out and the results are compared with that in tokamaks with similar geometry and reveal that the ITG modes in RFP configurations are more stable than in tokamaks. The physics mechanism for such difference is that shorter connection length in RFPs leads to stronger landau damping, which is dominant and ultimately determinant for the stability threshold. The results confirm and extend the previous conclusion obtained with the differential equation [S. C. Guo, Phys. Plasmas 13, 122510 (2008)]. In addition, the effects of magnetic gradient and curvature drifts, which induce important interaction driving the modes, are carefully investigated. The effects of safety factor, ratio of electron temperature to ion temperature, magnetic shear as well as finite Larmor radius are also studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma drift-kinetic equation calculations in three-dimensional magnetic geometries

A new code to simulate three-dimensional plasmas in complex toroidal geometries is presented. It solves drift-kinetic equations for the one-particle distribution function f based on their projection onto a functional basis consisting of an arbitrary number of Legendre-Laguerre polynomials. In this paper, these theoretical aspects of the code are exposed together with their relation with the standard formalism. Comparisons with neoclassical theory for the large aspect ratio case and first calculations in the geometry of the TJ-II Heliac are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced production of runaway electrons during electron cyclotron resonance heating and in the presence of supersonic molecular beam injection in the HL-2A tokamak

In the present paper, it is reported that a large production of runaway electrons has been observed during the flattop phase of electron cyclotron resonance heating (ECRH) discharges and in the presence of supersonic molecular beam injection (SMBI) in the HuanLiuqi-2A (commonly referred to as HL-2A) [Q. W. Yang, Nucl. Fusion 47, S635 (2007)] tokamak. For the set of discharges carried out in the present experiment, the ranges of ECRH power and plasma electron density are 0.8-1.0 MW and (3.0-4.0)x10{sup 19} m{sup -3}, respectively. A large number of superthermal electrons are produced through the avalanche effect [A. Lazaros, Phys. Plasmas 8, 1263 (2001)] during ECRH. The loop voltage increase due to SMBI gives rise to a decline in the critical runaway energy, which leads to that many superthermal electrons could be converted into runaway region. Therefore, this phenomenon may come from the synergetic effects of ECRH and SMBI. That is, the superthermal electrons created by ECRH are accelerated into runaway regime via the Dreicer process which is triggered by SMBI. The experimental results are in well agreement with the calculational ones based on the superthermal electron avalanche effect and the Dreicer runaway theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway-loss induced negative and positive loop voltage spikes in the Aditya Tokamak

Negative spikes followed by positive ones in the loop voltage signal during the discharge are observed in the Aditya Tokamak [S. B. Bhatt et al., Indian J. Pure Appl. Phys. 27, 710 (1989)]. These spikes are always accompanied by hard x-ray bursts caused by sudden loss of runaway electrons. The observed growth of m=3 mode seemed responsible for the losses of localized beams of runaway electrons (E{sub {gamma}{approx}1}-5 MeV) from the plasma region around q=3 magnetic surface. The movement of these runaway electrons during their extraction from inside the plasma induces both positive and negative electric fields at those locations. In this paper, a one-dimensional toroidal electric field diffusion model is used to estimate the induced electric field at the plasma boundary, which matches quite well with the observed spikes in loop voltage in both magnitude as well as its temporal evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ideal and resistive edge stability calculations with M3D-C{sup 1}

Growth rates of edge localized modes for various benchmark equilibria, including a diverted equilibrium, are calculated using the nonideal fluid code M3D-C{sup 1}. Growth rates calculated by M3D-C{sup 1} in the ideal limit are found to agree with those calculated by ideal magnetohydrodynamics codes. The effects of nonuniform density and resistivity profiles are explored, as well as the sensitivity of growth rates to the position of the ideal vacuum-plasma interface. Growth rates of the diverted equilibrium are found to be particularly sensitive to moving this interface inward from the separatrix, but less sensitive to extending the plasma region beyond the separatrix. The resistivity profile within the plasma is found not to affect growth rates significantly; however, growth rates may be greatly reduced by treating the outer region as a resistive plasma instead of an ideal vacuum. Indeed, it is found that for typical scrape-off layer (SOL) temperatures, the resistive SOL model behaves more like an ideal plasma than a vacuum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗