Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Systems Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Networked HIL Simulation System for Modeling Large-scale Power Systems

This paper presents a network hardware-in-the-loop (HIL) simulation system for modeling large-scale power systems. Researchers have developed many HIL test systems for power systems in recent years. Those test systems can model both microsecond-level dynamic responses of power electronic systems and millisecond-level transients of transmission and distribution grids. By integrating individual HIL test systems into a network of HIL test systems, we can create large-scale power grid digital twins with flexible structures at required modeling resolution that fits for a wide range of system operating conditions. This will not only significantly reduce the need for field tests when developing new technologies but also greatly shorten the model development cycle. In this paper, we present a networked OPAL-RT based HIL test system for developing transmission-distribution coordinative Volt-VAR regulation technologies as an example to illustrate system setups, communication requirements among different HIL test systems, and connection mechanisms. Impacts of communication delays, information exchange cycles, and computing delays are illustrated. Simulation results show that the performance of a networked HIL test system is satisfactory.

digital twin, distribution system, co-simulation, ↗
DOE OSTI2019

Size-Dependent Liquid–Liquid Phase Separation in Atmospherically Relevant Complex Systems

Physical properties of aerosol particles, such as liquid-liquid phase separation (LLPS), have the potential to impact the climate system. Model systems have been shown to have size-dependent LLPS in the submicron regime, yet, these systems are an extreme simplification of ambient aerosol, which can include myriad organic compounds. In our research, we expand the studies of LLPS in particles consisting of ammonium sulfate and more complex organic mixtures from multiple organic compounds to α-pinene secondary organic matter (SOM). All systems display a size-dependent morphology, with small particles remaining homogeneous while large particles phase separate. Surprisingly, three-phase particles were also observed in some of the systems in addition to a new phase state that we have termed channel morphology, which can arise upon efflorescence. The existence of size-dependent LLPS in complex organic mixtures and SOM provides evidence that this is a relevant phenomenon for ambient aerosol and should be considered when modeling atmospheric aerosol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Carbon-13 Radiofrequency Amplification by Stimulated Emission of Radiation of the Hyperpolarized Ketone and Hemiketal Forms of Allyl [1- 13 C]Pyruvate

13 C hyperpolarized pyruvate is an emerging MRI contrast agent for sensing molecular events in cancer and other diseases with aberrant metabolic pathways. This metabolic contrast agent can be produced via several hyperpolarization techniques. Despite remarkable success in research settings, widespread clinical adoption faces substantial roadblocks because the current sensing technology utilized to sense this contrast agent requires the excitation of 13 C nuclear spins that also need to be synchronized with MRI field gradient pulses. Here, we demonstrate sensing of hyperpolarized allyl [1- 13 C]pyruvate via the stimulated emission of radiation that mitigates the requirements currently blocking broader adoption. Specifically, 13 C Radiofrequency Amplification by Stimulated Emission of Radiation ( 13 C RASER) was obtained after pairwise addition of parahydrogen to a pyruvate precursor, detected in a commercial inductive detector with a quality factor (Q) of 32 for sample concentrations as low as 0.125 M with 13 C polarization of 4%. Moreover, parahydrogen-induced polarization allowed for the preparation of a mixture of ketone and hemiketal forms of hyperpolarized allyl [1- 13 C]pyruvate, which are separated by 10 ppm in 13 C NMR spectra. This is a good model system to study the simultaneous 13 C RASER signals of multiple 13 C species. This system models the metabolic production of hyperpolarized [1- 13 C]lactate from hyperpolarized [1- 13 C]pyruvate, which has a similar chemical shift difference. Our results show that 13 C RASER signals can be obtained from both species simultaneously when the emission threshold is exceeded for both species. On the other hand, when the emission threshold is exceeded only for one of the hyperpolarized species, 13 C stimulated emission is confined to this species only, therefore enabling the background-free detection of individual hyperpolarized 13 C signals. Furthermore, the reported results pave the way to novel sensing approaches of 13 C hyperpolarized pyruvate, potentially unlocking hyperpolarized 13 C MRI on virtually any MRI system–an attractive vision for the future molecular imaging and diagnostics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Dynamic Microgrids With Self-Organized Grid-Forming Inverters in Unbalanced Distribution Feeders

In contrast to conventional static microgrids (MGs), MGs with dynamic and adjustable territories (i.e., dynamic MGs) are proposed and implemented in this paper. Dynamic MGs are commonly dominated by grid-forming inverters and nested in unbalanced distribution feeders. Unlike balanced systems where only positive-sequence components exist, proper operation of unbalanced dynamic MGs presents additional challenges. A distributed secondary control strategy is developed in this study for distributed generators (DGs) interfaced with gridforming inverters in unbalanced dynamic MGs by providing coordinated regulations on both positive- and negative-sequence system models. System frequency and voltage are under constant regulation, along with voltage unbalance (VU) management for multiple critical load buses (CLB). The proposed control strategy enables seamless system transition during unbalanced dynamic MGs reconfiguration, and guarantees proportional positive- and negative-sequence power sharing among connected DGs with respect to system topology variation. Detailed controller designs are provided and stability analyses are derived. The proposed control strategy is fully implemented in hardware controllers and validated on a Hardware-in-the-Loop (HIL) MG testbed.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Analysis of predicted mean vote-based model predictive control for residential HVAC systems

Model Predictive Control (MPC) is an advanced process control method that has attracted much attention in building heating, ventilation, and air conditioning (HVAC) systems. Here, this paper analyzes the optimal precooling performance in residential buildings using MPC with two different comfort indices, namely, temperature and predicted mean vote (PMV). It first formulates, for each comfort index, an optimization problem that accounts for different factors, such as weather, home thermal condition, prediction horizon, time-of use (TOU) utility rate, and rated cooling capacity. The problem is then solved, resulting in an MPC strategy that determines the HVAC on/off control signal and minimizes energy cost over a receding time horizon while maintaining thermal comfort. The energy performance difference between temperature-based and PMV-based MPC strategies is subsequently investigated, especially in light of the interior wall surface temperature and under different combinations of the factors. Extensive simulation results demonstrated that the proposed MPC strategies are adaptive and their performances depend primarily on weather, home thermal condition, and prediction horizon, while the impact of TOU utility rate and rated cooling capacity is relatively small. Because the PMV-based MPC strategy can take advantage of the lower interior wall surface temperature due to precooling, it resulted in 8–45% cost savings for the scenarios investigated and an average increase of 0.042–0.113 in the absolute value of the PMV index compared to the temperature-based MPC strategy.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2026

Systematic Evaluation of Atmospheric Forcing, Surface Datasets, and Mesh Effects on Kilometer-Scale Land Surface and River Modeling

Earth system models are advancing toward kilometer-scale resolution to capture local climate impacts and extremes. High-resolution land and river modeling depends on multiple factors, including mesh, surface datasets, and atmospheric forcing, but their relative effects at kilometer scales remain unquantified. We evaluated five Energy Exascale Earth System Model land and river configurations over the Mid-Atlantic region using two mesh (1/8° structured versus variable-resolution unstructured mesh), two surface datasets (default versus newly developed), and three atmospheric forcings (NLDAS2, MSWX, GSWP). Evaluation against satellite, reanalysis, and in situ benchmarks across water, energy, and carbon cycles quantifies how these factors affect model performance. Forcing selection produces the largest bias reductions (12-99% across variables), followed by surface datasets (7-75%) and mesh (up to 21%). Forcing effects vary by variable, with MSWX reducing biases for snow water equivalent, evapotranspiration, albedo, temperature, and gross primary productivity, GSWP for snow cover and runoff, and NLDAS for soil moisture and streamflow. The use of newly developed surface datasets improves gross primary productivity (58% bias reduction) and evapotranspiration but increase soil moisture and albedo biases due to current modeling limitations. Variable-resolution unstructured mesh improves the simulation of small-basin streamflow through better capturing drainage networks, though mesh minimally affects other land variables. These findings provide important guidance for high-resolution modeling development and actionable science.

Land and River modeling↗
DOE OSTI2021

Retaining Systems Engineering Model Meaning Through Transformation: Demo 2

Digital engineering strategies typically assume that digital engineering models interoperate seamlessly across the multiple different engineering modeling software applications involved, such as model- based systems engineering (MBSE), mechanical computer-aided design (MCAD), electrical computer-aided design (ECAD), and other engineering modeling applications. The presumption is that the data schema in these modeling software applications are structured in the familiar flat- tabular schema like any other software application. Engineering domain-specific applications (e.g., systems, mechanical, electrical, simulation) are typically designed to solve domain-specific problems, necessarily excluding explicit representations of non-domain information to help the engineer focus on the domain problems (system definition, design, simulation). Such exclusions become problematic in inter-domain information exchange. The obvious assumptions of one domain might not be so obvious to experts in another domain. Ambiguity in domain-specific language can erode the ability to enable different domain modeling applications to interoperate, unless the underlying language is understood and used as the basis for translation from one application to another. The engineering modeling software application industry has struggled for decades to enable these applications to interoperate. Industry standards have been developed, but they have not unified the industry. Why is this? The authors assert that the industry has relied on traditional database integration methods. The basic issue prohibiting successful application integration then is that traditional database-driven integration does not consider the distinct languages of each domain. An engineering models meaning is expressed through the underlying language of that engineering domain. In essence, traditional integration methods do not retain the semantic context (meaning) of the model. The basis of this research stems from the widely held assumption that systems engineering models are (or can be) structured according to the underlying semantic ontology of the model. This assumption can be imagined from two thoughts. 1) Digital systems engineering models are often represented using graph theory (the graph of a complex systems model can contain millions of nodes and edges). When examining the nodes one at a time and following the outbound edges of each node one by one, one can end up with rudimentary statements about the model (i.e., node A relates to node B), as in a semantic graph. 2) Likewise, from the study of natural languages, a sentence can be structured into unambiguous triples of subject-predicate-object within formal and highly expressive semantic ontologies. The rudimentary statements about a systems model discerned with graph theory closely mimic the triples used in the ontologies that try to structure natural languages. In other words, a systems models semantic graph can be (or is) structured into an ontology. Additionally, it is well established in industry that through natural language processing (NLP), which provides the means to create language structures, that computers can interpret ontological graphs. Therefore, the authors hypothesized that if the integrity of the underlying semantic structure of a systems model is retained, the contextual meaning of the model is retained. By structuring system models into the triples of the underlying ontology during the transformation from one MBSE application to another, the authors have provided a proof of the concept that the meaning of a system model can be retained during transformation. The authors assert that this is the missing ingredient in effective systems model-to-model interoperability. ACKNOWLEDGEMENTS The authors would like to thank the FY19 Model Interoperability team members who provided a solid foundation for the FY20 team to leverage: John McCloud, for the work he did to guide us toward the right use of technology that will appropriately discover and manipulate ontologies. Carlos Tafoya, for the work he did to develop an application programming interface (API)/Adapter that would export ontology-based data from GENESYS. Peter Chandler, for the work he did to architect our overall integration solution, with an eye toward the future that would influence a large-scale federated production-level systems engineering digital model ecosystem.

42 ENGINEERING↗
DOE OSTI2022

Reinforcement learning for adaptive maintenance policy optimization under imperfect knowledge of the system degradation model and partial observability of system states

Maintenance policy optimization usually is faced with challenges that arise from an imperfect knowledge of system degradation models and from the partial observability of system degradation states. Here, this paper proposes a reinforcement learning method to address these two challenges for a class of maintenance problems with Markov degradation processes. The reinforcement learning approach consists of a learning component and a planning component. Using sequentially collected observations, at each step of decision-making the learning component improves the knowledge of system degradation in terms of the probability distributions of the transition rates based on sequential Bayesian inference. Using the updated transition rates, at each step of decision-making the maintenance policy optimization problem is then formulated as a partially observable Markov decision problem, and the planning component computes the optimal maintenance policy that maximizes the expected cumulative reward. The proposed method is illustrated using a numerical example with repair and inspection maintenance actions. The result shows that as more observations are collected, the learning component progressively learns the true system degradation process, and the planning component adjusts the optimal maintenance policy accordingly as well, which leads to increased reward.

42 ENGINEERING↗
DOE OSTI2020

What Questions Would a Systems Engineer Ask to Assess Systems Engineering Models as Credible

Digital Systems Engineering strategies typically call for digital Systems Engineering models to be retained in repositories and certified as an authoritative source of truth (enabling model reuse, qualification, and collaboration). In order for digital Systems Engineering models to be certified as authoritative (credible), they need to be assessed - verified and validated - and with the amount of uncertainty in the model quantified (consider reusing someone else's model without knowing the author). Due to this increasing model complexity, the authors assert that traditional human-based methods for validating, verifying, and uncertainty quantification - such as human-based peer-review sessions - cannot sufficiently establish that a digital Systems Engineering model of a complex system is credible. Digital Systems Engineering models of complex systems can contain millions of nodes and edges. The authors assert that this level of detail is beyond the ability of any group of humans - even working for weeks at a time - to discern and catch every minor model infraction. In contrast, computers are highly effective at discerning infractions with massive amounts of information. The authors suggest that a better approach might be to focus the humans at what model patterns should be assessed and enable the computer to assess the massive details in accordance with those patterns - by running through perhaps 100,000 test loops. In anticipation of future projects to implement and automate the assessment of models at Sandia National Laboratories, a study was initiated to elicit input from a group of 25 Systems Engineering experts. The authors positioning query began with - 'What questions would a Systems Engineer ask to assess Systems Engineering models for credibility?" This report documents the results of that survey.

42 ENGINEERING↗
DOE OSTI2020

Distribution System Segmented Model Simplification with Independent Dynamically Changing End-Use Loads

With more emerging technologies in power distribution systems, to support quasi-static time-series (QSTS) simulation over short time frames, accurately modeling the dynamic behavior of end-use load under various conditions is im- portant. However, time and cost can be a burden for the QSTS simulation of thousands of houses representing dynamic load behaviors on large distribution feeders. There are two main contributions of this paper in order to reduce the QSTS simulation complexity. First, the paper presents a method to stochasti- cally model the dynamic behavior of end-use load for QSTS simulations. Second, using the stochastically modeled load behavior as an input to a distribution sys- tem, and building on our previous QSTS simulation simplification/acceleration method that relies on uniform load behavior, this paper presents a segment substitution approach for the simplification of distribution system models with independent dynamically changing end-use loads. Our numerical results show that compared to GridLAB-D, a software tool that simulates end-use load be- havior through physical models, the proposed stochastic modeling approach achieved an 89.3% simulation time reduction for end-use loads, while accurately capturing the temporally changing total load behavior. Moreover, the QSTS simulation of a large test distribution system through OpenDSS showed that the proposed simplification method decreased the feeder simulation time by a factor of three at less than 0.3% voltage error. Compared to our previous method with independent dynamic loads, the voltage error is reduced by a factor of four.

Power distribution system modeling, stochastic pro↗
DOE OSTI2022

Emerging Trends in Power System Planning Models

This presentation highlights NREL's power system modeling capabilities, both existing and the future direction of improvements. Specific enhancements to the ReEDS (Regional Energy Deployment System) model and a new electricity market design testbed called EMIS (Electricity Markets and Investment Suite) were described. This content was part of a broader discussion to help inform the National Academies of Sciences, Engineering, and Medicine Committee on the Future of Electric Power in the U.S. on existing power system models and improvements needed in these models to capture the increasing complexity and interconnectedness of the power system.

capacity expansion modeling↗
DOE OSTI2022

APPLICATION OF OBJECTIVES-DRIVEN ASSURANCE CASES TO SYSTEM DEVELOPMENT IN AN EVOLVING ACQUISITION MODEL

System properties such as “safety” and “dependability” cannot, in practice, be proven, and must be argued in an “assurance case” aimed at supporting risk-acceptance decisions that have to be made by system acquirers and/or regulatory authorities. The paper is concerned with applications of the “assurance case” idea early in design and development of new systems, when (apart from dedicated testing) the only available operating experience information derives from previous (non-identical) systems. Much of the discussion is based on an evolving acquisition model at the US National Aeronautics and Space Administration; previously, most major systems were developed in-house, but some major systems will now be developed by and acquired from commercial providers. Key points discussed include the following. (1) By promoting a particular kind of focused discussion between acquirers and providers, the use of assurance cases should be particularly valuable under the new acquisition model. (2) In principle, objectives-driven (sometimes called “performance-based”) approaches to assurance of performance have significant advantages in cases where they are applicable. (3) For truly novel systems, completeness of the safety analysis is a significant issue; it is important for the assurance case to include a commitment by the provider (or applicant) to seriously pursue analysis of operating experience, so that previously unrecognized hazards can be identified and addressed. (4) Inquiries into major accidents often point to deficiencies in management oversight in all parts of the life cycle; management processes need to be addressed in the formulation and the implementation of an assurance case. Under the new acquisition model, these considerations imply a serious reconsideration of the way in which the development process is managed by both providers and acquirers.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Application of Objectives-Driven Assurance Cases to System Development in an Evolving Acquisition Model

System properties such as “safety” and “dependability” cannot, in practice, be proven, and must be argued in an “assurance case” aimed at supporting risk-acceptance decisions that have to be made by system acquirers and/or regulatory authorities. The paper is concerned with applications of the “assurance case” idea early in design and development of new systems, when (apart from dedicated testing) the only available operating experience information derives from previous (non-identical) systems. Much of the discussion is based on an evolving acquisition model at the US National Aeronautics and Space Administration; previously, most major systems were developed in-house, but some major systems will now be developed by and acquired from commercial providers. Key points discussed include the following. (1) By promoting a particular kind of focused discussion between acquirers and providers, the use of assurance cases should be particularly valuable under the new acquisition model. (2) In principle, objectives-driven (sometimes called “performance-based”) approaches to assurance of performance have significant advantages in cases where they are applicable. (3) For truly novel systems, completeness of the safety analysis is a significant issue; it is important for the assurance case to include a commitment by the provider (or applicant) to seriously pursue analysis of operating experience, so that previously unrecognized hazards can be identified and addressed. (4) Inquiries into major accidents often point to deficiencies in management oversight in all parts of the life cycle; management processes need to be addressed in the formulation and the implementation of an assurance case. Under the new acquisition model, these considerations imply a serious reconsideration of the way in which the development process is managed by both providers and acquirers.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Heuristic Dispatch Based on Price Signals for Behind-the-Meter PV-Battery Systems in the System Advisor Model

The economic potential of a behind-the-meter (BTM) PV-battery system depends greatly on how the battery is dispatched. Different utility rates, system sizes, generation and load profiles can all require different dispatch strategies. This paper presents price signals dispatch, a new algorithm for automated economic dispatch of BTM PV-battery systems, which utilizes 24-hour PV and load forecasts, degradation data, and utility rates. The algorithm is integrated with the System Advisor Model (SAM) tool and is tested with a nonlinear generic electrochemical battery model. Price signals dispatch outperforms SAM's existing algorithms in cases requiring a balance between demand charge management and energy arbitrage, and in cases where battery degradation imposes a significant cost.

batteries↗
DOE OSTI2019

Updated biokinetic model for systemic americium

The biokinetic model for systemic americium (Am) currently recommended by the International Commission on Radiological Protection (ICRP) for application to occupational intake of Am is based on information available through the early 1990s. Much additional information on Am biokinetics has been developed in the past 25 y, including measurements of retention and excretion of 241 Am in many workers with 241 Am burdens and post mortem measurements of 241 Am in tissues of some of those workers. The ICRP's current Am model is reasonably consistent with the updated information, with the main exception that the current model apparently overestimates 24-hour urinary Am as a fraction of skeletal or systemic Am at late times after intake. This paper provides an overview of current information on the systemic kinetics of Am in adult human subjects and laboratory animals and presents an updated biokinetic model for systemic Am that addresses the discrepancies between the current database and current ICRP systemic model for Am. Here, this model is applied in Part 4 (to appear) of an ICRP series of reports on intake of radionuclides by workers called the OIR (Occupational Intake of Radionuclides) series.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2025

Progress on the MARVEL Cybersecurity by Design Model-Based Systems Engineering Project

Formal model-based systems engineering (MBSE) combines a model, systems thinking, and systems engineering to visually depict the boundaries, context, and behavior of interconnected systems, facilitating effective design, development, and utilization of engineered systems throughout the systems engineering lifecycle. Although nuclear reactor vendors employ these tools to integrate functionality, performance, and safety, they are not yet addressing digital risk concerns introduced by use of operational technology, such as digital instrumentation and control systems. To accomplish this objective, the Microreactor Applications Research Validation and EvaLuation (MARVEL) microreactor was used as an MBSE case study. This real-world application provides a first-of-a-kind opportunity to demonstrate the benefits of integrating digital risk and cybersecurity into the MBSE design process of a nuclear reactor. This paper provides an update of the ongoing MARVEL Cyber MBSE project as it specifically relates to the integration of digital risk management and cybersecurity by design.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

CSP-Plant Modeling Guidelines and Compliance of the System Advisor Model (SAM)

Accurately modeling risks, costs, and electricity output is essential to the financing and advancement of concentrating solar power projects. To address this need, a group of CSP experts created a guideline document, titled SolarPACES Guideline for Bankable STE Yield Assessment [1]. To make this information more accessible and allow stakeholders to test specific models against the recommendations, the guidelines have been condensed into a spreadsheet-based checklist. The checklist was applied to NREL's System Advisor Model (SAM) software, providing useful feedback to both the checklist group and the SAM development team. This study showed strong agreement between SAM and the guidelines, demonstrated the use of the guidelines in model validation, and resulted in several recommended improvements to SAM.

14 SOLAR ENERGY↗