Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Step”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A fractional step solution method for the unsteady incompressible Navier-Stokes equations in generalized coordinate systems

The time-dependent, three-dimensional incompressible Navier-Stokes equations are presently solved in generalized coordinate systems by means of a fractional-step method whose primitive variable formulation uses as dependent variables, in place of the Cartesian components of the velocity: (1) pressure (defined at the center of the computational cell), and (2) volume fluxes across the faces of the cells. The momentum equations are solved by means of an approximate factorization method. A novel 'ZEBRA' scheme incorporating four-color ordering efficiently solves the Poisson equation. Illustrative two- and three-dimensional laminar flow test cases are computed and evaluated relative to extant numerical and experimental results, and good agreement is obtained.

Rosenfeld, Moshe↗

Detection of target distance in the presence of an interfering reflection using a frequency-stepped double side-band suppressed carrier microwave radar system

A technique for detecting the distance to a highly reflective target in the presence of an interesting reflection using a frequency-stepped double-sideband suppressed carrier (DSBSC) microwave-millimeter-wave radar system is analytically derived. The main result of the analysis shows that the measured group delays produced by the DSBSC system possess a periodicity inversely proportional to the difference between the time delays to the target and interferer, independent of the signal-to-interference ratio (SIR). Simulation results are presented in the context of electron plasma density range estimation using a block diagram communications CAD tool. A unique and accurate plasma model is introduced. A high-resolution spectral estimation technique based on an autoregressive time series analysis is applied to the measured group delays, and it is shown that accurate target distance estimates may be obtained, independent of SIR.

Ybarra, Gary A.↗

Ar-40/Ar-39 ages of six Apollo 15 impact melt rocks by laser step heating

Fifteen high resolution (21-51 step) Ar-40/Ar-39 age spectra are obtained for six Apollo 15 impact melt rocks of different compositions, using a continuous laser system on submilligram subsamples and on single crystal plagioclase clasts. Four of the six samples gave reproducible age spectra with well-defined intermediate temperature plateaus over 48 percent or more of the Ar-39 released; the plateaus are interpreted as crystallization ages. Samples 15304,7,69, 15294,6,21 and 15314,26,156 gave virtually identical plateau ages whose weighted mean is 3870 + or - 6 Ma. These three melt rocks differ in composition and likely formed in three separate impact events.

Dalrymple, G. B.↗

Stepping-Motion Motor-Control Subsystem For Testing Bearings

Control subsystem closed-loop angular-position-control system causing motor and bearing under test to undergo any of variety of continuous or stepping motions. Also used to test bearing-and-motor assemblies, motors, angular-position sensors including rotating shafts, and like. Monitoring subsystem gathers data used to evaluate performance of bearing or other article under test. Monitoring subsystem described in article, "Monitoring Subsystem For Testing Bearings" (GSC-13432).

Powers, Charles E.↗

Fractional-Step, Finite-Volume Computation Of Flow

Method of solving Navier-Stokes equations of incompressible flow in general nonorthogonal curvilinear coordinates incorporates fractional-step and finite-volume approaches. Developed in continuing effort to achieve accuracy without need for excessive computation time in numerical simulation of time-dependent, three-dimensional flows bounded by surfaces of complicated shape.

Kwak, Dochan↗

Kinetics of the template-directed oligomerization of guanosine 5'-phosphate-2-methylimidazolide: Effect of temperature on individual steps of reactionion

Non-enzymatic, template-directed reactions have been proposed as models for prebiological polynucleotide synthesis. Chemically activated mononucleotides react in the presence of a polynucleotide, acting as the template in a Watson-Crick base-pairing fashing, and form the complementary daughter polynucleotide. Phosphoimidazolide-activated nucleotides have been used successfully as substrates in these reactions. The kinetics of the guanosine 5'-monophosphate-2-methylimidazolide (2-MelmpG) reaction in aqueous pH 8.0 solutions in the presence and in the absence of polycytidylate (poly(C)) were studied, acting as the template at 6, 23, and 37 C. In the absence of the template, the major reaction pathway of 2-MelmpG is hydrolysis of the P-N bond to form the unreactive guanosine 5'-monophosphate (5'-GMP) and 2-methylimidazole. Concentrated solution of 2-MelmpG (greater than 0.02 M) in the absence of the template form only a small amount dinucleotide, (pG)2, but in the presence of poly(C), oligoguanylates, (pG)n with 2 less than or = n less than or = 40, can be detected. We were able to determine the rate constants for individual steps of this reaction. A summary of the conclusions is presented.

Kanavarioti, A.↗

High resolution frequency to time domain transformations applied to the stepped carrier MRIS measurements

Two narrow-band radar systems are developed for high resolution target range estimation in inhomogeneous media. They are reformulations of two presently existing systems such that high resolution target range estimates may be achieved despite the use of narrow bandwidth radar pulses. A double sideband suppressed carrier radar technique originally derived in 1962, and later abandoned due to its inability to accurately measure target range in the presence of an interfering reflection, is rederived to incorporate the presence of an interfering reflection. The new derivation shows that the interfering reflection causes a period perturbation in the measured phase response. A high resolution spectral estimation technique is used to extract the period of this perturbation leading to accurate target range estimates independent of the signal-to-interference ratio. A non-linear optimal signal processing algorithm is derived for a frequency-stepped continuous wave radar system. The resolution enhancement offered by optimal signal processing of the data over the conventional Fourier Transform technique is clearly demonstrated using measured radar data. A method for modeling plane wave propagation in inhomogeneous media based on transmission line theory is derived and studied. Several simulation results including measurement of non-uniform electron plasma densities that develop near the heat tiles of a space re-entry vehicle are presented which verify the validity of the model.

Ardalan, Sasan H.↗

Structural mechanics of 3-D braided preforms for composites. IV - The 4-step tubular braiding

This paper presents the fundamentals of the 4-step 3D tubular braiding process and the structure of the preforms produced. Based on an idealized structural model, geometric relations between the structural parameters of the preform are analytically established. The effects of machine arrangement and operating conditions are discussed. Yarn retraction, yarn surface angle, outside diameter, and yarn volume fraction of the preform in terms of the pitch length, the inner diameter, and the machine arrangement are theoretically predicted and experimentally verified.

Hammad, M.↗

Multigrid acceleration of a fractional-step solver in generalized curvilinear coordinate systems

The efficiency of the INS3D-fractional step (FS) code has been significantly enhanced by accelerating the Poisson solver with a multigrid (MG) method. This is apparently the first implementation of the MG method for solving the 3D discrete Poisson-like equation obtained in the derivation of FS solution methods for the incompressible Navier-Stokes equations in generalized nonorthogonal coordinate systems using a staggered arrangement of the variables. The MG solver is insensitive to the geometry, even in cases of highly nonorthogonal clustered meshes, as well as to the free parameters of MG methods.

Rosenfeld, Moshe↗

Turbulent flow past a backward-facing step - A critical evaluation of two-equation models

The ability of two-equation models to accurately predict separated flows is analyzed from a combined theoretical and computational standpoint. Turbulent flow past a backward facing step is chosen as a test case in an effort to resolve the variety of conflicting results that were published during the past decade concerning the performance of two-equation models. It is found that the errors in the reported predictions of the k-epsilon model have two major origins: (1) numerical problems arising from inadequate resolution, and (2) inaccurate predictions for normal Reynolds stress differences arising from the use of an isotropic eddy viscosity. Inadequacies in near wall modelling play a substantially smaller role. Detailed calculations are presented which strongly indicate the standard k-epsilon model - when modified with an independently calibrated anisotropic eddy viscosity - can yield surprisingly good predictions for the backstep problem.

Thangam, S.↗

Extraction of helium from individual interplanetary dust particles by step-heating

Fragments from 20 individual particles, collected in the earth's stratosphere and believed to be interplanetary dust particles (IDPs), were subjected to step-heating to see if differences in the release pattern for He-4 could be observed which might provide clues to the origin of the particles. Comparisons were made to the release pattern for 18 individual lunar surface grains heated in the same manner. Twelve of the IDP fragments contained an appreciable amount of He-4, 50 percent of which was released by the time the particles were heated to approximately 630 C. For the 18 individual lunar grains, the corresponding average temperature was 660 C. The He-3/He-4 ratios found for these fragments agreed well with those found for deep Pacific magnetic fines believed to be of extraterrestrial origin, and were comparable to those which have been observed for the solar wind and lunar surface soil grains. Four of the IDP fragments contained appreciably less He-4, and this was released at a higher temperature. The remaining four fragments had too little He-4 to permit a determination. From Flynn's analyses of the problem of the heating of IDPs in their descent in the atmosphere, the present results suggest that the parent IDPs of the 12 particles which contained an appreciable amount of He-4 suffered very little heating in their descent and are likely of asteroidal origin, although one cannot rule out the possibility that at least some of them had a cometary origin and entered the earth's atmosphere at a grazing angle.

Nier, A. O.↗

IN-STEP inflatable antenna experiment

The objectives of the NASA In-Space Technology Experiments Program (IN-STEP) are to validate the deployment of a 14-m inflatable parabolic reflector structure, measure the reflector surface accuracy, and investigate structural damping characteristics under operational conditions. Here, the accomplishment to date and the approach planned for the remainder of the experiment are discussed. In particular, attention is given to the experiment subsystems, the mechanical thermal, and structural characteristics of the reflector, and the ground-based test program.

Freeland, R. E.↗

Rounded Approximate Step Functions For Interpolation

Rounded approximate step functions of form x(Sup m)/(x(Sup n) + 1) and 1/(x(Sup n) + 1) useful in interpolating between local steep slopes or abrupt changes in tabulated data varying more smoothly elsewhere. Used instead of polynomial curve fits. Interpolation formulas based on these functions implemented quickly and easily on computers. Used in real-time control computations to interpolate between tabulated data governing control responses.

Nunes, Arthur C., Jr.↗

Space Transportation Engine Program (STEP), phase B

The Space Transportation Engine Program (STEP) Phase 2 effort includes preliminary design and activities plan preparation that will allow smooth and time transition into a Prototype Phase and then into Phases 3, 4, and 5. A Concurrent Engineering approach using Total Quality Management (TQM) techniques, is being applied to define an oxygen-hydrogen engine. The baseline from Phase 1/1' studies was used as a point of departure for trade studies and analyses. Existing STME system models are being enhanced as more detailed module/component characteristics are determined. Preliminary designs for the open expander, closed expander, and gas generator cycles were prepared, and recommendations for cycle selection made at the Design Concept Review (DCR). As a result of July '90 DCR, and information subsequently supplied to the Technical Review Team, a gas generator cycle was selected. Results of the various Advanced Development Programs (ADP's) for the Advanced Launch Systems (ALS) were contributive to this effort. An active vehicle integration effort is supplying the NASA, Air Force, and vehicle contractors with engine parameters and data, and flowing down appropriate vehicle requirements. Engine design and analysis trade studies are being documented in a data base that was developed and is being used to organize information. To date, seventy four trade studies were input to the data base.

Source record↗

Implicit application of polynomial filters in a k-step Arnoldi method

The Arnoldi process is a well known technique for approximating a few eigenvalues and corresponding eigenvectors of a general square matrix. Numerical difficulties such as loss of orthogonality and assessment of the numerical quality of the approximations as well as a potential for unbounded growth in storage have limited the applicability of the method. These issues are addressed by fixing the number of steps in the Arnoldi process at a prescribed value k and then treating the residual vector as a function of the initial Arnoldi vector. This starting vector is then updated through an iterative scheme that is designed to force convergence of the residual to zero. The iterative scheme is shown to be a truncation of the standard implicitly shifted QR-iteration for dense problems and it avoids the need to explicitly restart the Arnoldi sequence. The main emphasis of this paper is on the derivation and analysis of this scheme. However, there are obvious ways to exploit parallelism through the matrix-vector operations that comprise the majority of the work in the algorithm. Preliminary computational results are given for a few problems on some parallel and vector computers.

Sorensen, D. C.↗

Lunar stepping stones to a manned Mars exploration scenario

The initial trips to Mars by humans will be the first real severing of our dependence on Earth's environment. Common sense dictates that a human departure from Earth measured in years, to explore a distant planet, requires systems, techniques, and operations that have solid credibility proven with space experience. The space test and verification experience must occur with Mars-like conditions but under proving-ground conditions with good instrumentation, close monitoring, and fast emergency recovery capabilities. The lunar environment is the only arena that satisfies the requirements of a space recovery capabilities. The lunar environment is the only arena that satisfies the requirements of a space planetary proving-ground. The objective of this scenario is to demonstrate a program planning approach that has human presence at Mars as the goal but, prudently, capitalizes on manned lunar project facilities, operations, and experience to enable a safe journey for the first Mars crews. The emphasis in lunar application objectives is to perform productive science and resources exploitation missions. Most of the Mars mission aspects can be proven in the lunar environment providing 'stepping stones' to conducting the first human mission to travel to Mars and return safely to Earth.

Davidson, W. L.↗

Feasibility study of a Ka-/Ka-band dichroic plate with stepped rectangular apertures

For the Cassini spacecraft mission, a dichroic plate is needed to pass Ka-band uplink (34.2 to 34.7 GHz) and to reflect Ka-band downlink (31.8 to 32.3 GHz) for dual-frequency operation in the Deep Space Network. The special characteristic of the Ka-/Ka-band dichroic plate is that the pass band and the reflective band are only 1.9 GHz (5.7 percent) apart. A thick dichroic plate with stepped rectangular apertures that function as resonator filters was chosen for the Ka-/Ka-band dichroic plate design. The results of the feasibility study are presented in this article.

Chen, J. C.↗

In-step Two-phase Flow (TPF) Thermal Control Experiment

The Two-Phase Flow Thermal Control Experiment is part of the NASA/OAST In-Space Technology Experiments (In-STEP) Program. The experiment is configured for the Hitchhiker Shuttle payload system and consists of a capillary pumped loop, heatpipe radiator, and two-phase flow heat exchanger. The flight experiment design approach, test plan, payload design, and test components are described in outline and graphic form.

Source record↗