Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Statistical Mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Limitations of spectral measures and observations of the group structure of surface waves

Wave-group structure, which plays a significant role in flux processes and the mechanics of the transfer of wave energy and momentum to the mean current field, is studied. The origin of wave groups, in particular sideband instabilities, the effects of amplitude variations on wave frequency and of wave damping on isolated groups, and flow separation over waves, is discussed. The mechanisms that cause the group formation are compared to the dynamics that result in wave propagation. The bifurcation and shift in wave modulations, and the possible existence of a unique asymptotic statistical state for the wave-modulation field are examined.

Mollo-Christensen, Erik↗
NASA NTRS1987

Long-term gamma-ray spectral variability of Cygnus X-1

Data from HEAO 3 observations of 0.05-10-MeV gamma-ray emission from Cyg X-1 during two 90-d periods (in fall 1979 and spring 1980) are compiled in tables and graphs and analyzed statistically to determine the temporal and spectral variability. It is found that a steady increase in 100-keV emission is accompanied by a decrease (and eventual disappearance) of MeV emission. The mechanisms which could theoretically be responsible for these phenomena are discussed.

Ling, J. C.↗
NASA NTRS1990

Structure of three-dimensional turbulent boundary layers

The changes that occur in the Reynolds-stress-producing motion when a cross-stream pressure gradient is applied to an initially two-dimensional turbulent flow are discussed. Two examples are used: (1) a temporal simulation of a channel flow with crossflow applied by a spanwise pressure gradient for t is greater than 0; and (2) a spatial simulation of the boundary layer on an infinite swept wing. Evidence examined to date suggests that the structural changes in the two cases are similar, but the mechanisms may be significantly different, even if effects peculiar to the viscous wall region are ignored. The results from (2) are provisional, based on too short a time series for accurate statistical averages to be obtained. We treat turbulence 'statistics' (solutions of the Navier-Stokes equations in three space dimensions and time) in the same way as experiments: both have limitations of accuracy but both are acceptable representations of real fluid flows.

Bradshaw, P.↗
NASA NTRS2010

Formation of Benzene in the Interstellar Medium

Polycyclic aromatic hydrocarbons and related species have been suggested to play a key role in the astrochemical evolution of the interstellar medium, but the formation mechanism of even their simplest building block-the aromatic benzene molecule-has remained elusive for decades. Here we demonstrate in crossed molecular beam experiments combined with electronic structure and statistical calculations that benzene (C6H6) can be synthesized via the barrierless, exoergic reaction of the ethynyl radical and 1,3- butadiene, C2H + H2CCHCHCH2 --> C6H6, + H, under single collision conditions. This reaction portrays the simplest representative of a reaction class in which aromatic molecules with a benzene core can be formed from acyclic precursors via barrierless reactions of ethynyl radicals with substituted 1,3-butadlene molecules. Unique gas-grain astrochemical models imply that this low-temperature route controls the synthesis of the very first aromatic ring from acyclic precursors in cold molecular clouds, such as in the Taurus Molecular Cloud. Rapid, subsequent barrierless reactions of benzene with ethynyl radicals can lead to naphthalene-like structures thus effectively propagating the ethynyl-radical mediated formation of aromatic molecules in the interstellar medium.

Jones, Brant M.↗
NASA NTRS2010

On the Phase-Averaged Spectrum of Pulsars and Shape of Their Cutoffs

All gamma ray pulsars exhibit an exponential cutoff in their spectra and for bright pulsars the statistics are sufficiently high to study the detailed shape of the cutoff. The phase averaged spectra of some pulsars exhibit a sub-exponential cutoff, not predicted by any single physical mechanism. Further studies clarified that (his gentler average cutoff is a consequence of having significant variations of the cutoff energy in the phase-resolved spectrum. In conclusion, the phase-averaged spectrum of a pulsar is not a physical quantity to test high-energy emission models.

Celik, O.↗
NASA NTRS2000

Mechanical, Chemical and Microstructural Characterization of Monazite-Coated Silicon Carbide Fibers

Tensile strengths of as-received Hi-Nicalon and Sylramic fibers and those having monazite surface coatings, deposited by atmospheric pressure chemical vapor deposition, were measured at room temperature and the Weibull statistical parameters determined. The average tensile strengths of uncoated Hi-Nicalon and Sylramic fibers were 3.19 +/- 0.73 and 2.78 +/- 0.53 GPa with a Weibull modulus of 5.41 and 5.52, respectively. The monazite-coated Hi-Nicalon and Sylramic fibers showed strength loss of approx. 10 and 15 percent, respectively, compared with the as-received fibers. The elemental compositions of the fibers and the coatings were analyzed using scanning Auger microprobe and energy dispersive X-ray spectroscopy. The LaPO4 coating on Hi-Nicalon fibers was approximately stoichiometric and about 50 nm thick. The coating on the Sylramic fibers extended to a depth of about 100 to 150 nm. The coating may have been stoichiometric LaPO4 in the first 30 to 40 nm of the layer. However, the surface roughness of Sylramic fiber made this profile somewhat difficult to interpret. Microstructural analyses of the fibers and the coatings were done by scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. Hi-Nicalon fiber consists of fine beta-SiC nanocrystals ranging in size from 1 to 30 mn embedded in an amorphous matrix. Sylramic is a polycrystalline stoichiometric silicon carbide fiber consisting of submicron beta-SiC crystallites ranging from 100 to 300 nm. Small amount of TiB2 nanocrystallites (approx. 50 nm) are also present. The LaPO4 coating on Hi-Nicalon fibers consisted of a chain of peanut shape particles having monazite-(La) structure. The coating on Sylramic fibers consisted of two layers. The inner layer was a chain of peanut shape particles having monazite-(La) structure. The outer layer was comprised of much smaller particles with a microcrystalline structure.

Bansal, N. P.↗
NASA NTRS1991

A kill curve for Phanerozoic marine species

A kill curve for Phanerozoic species is developed from an analysis of the stratigraphic ranges of 17,621 genera, as compiled by Sepkoski. The kill curve shows that a typical species' risk of extinction varies greatly, with most time intervals being characterized by very low risk. The mean extinction rate of 0.25/m.y. is thus a mixture of long periods of negligible extinction and occasional pulses of much higher rate. Because the kill curve is merely a description of the fossil record, it does not speak directly to the causes of extinction. The kill curve may be useful, however, to li inverted question markmit choices of extinction mechanisms.

NASA Discipline Number 52-40↗
NASA NTRS2008

Metrology Optical Power Budgeting in SIM Using Statistical Analysis Techniques

The Space Interferometry Mission (SIM) is a space-based stellar interferometry instrument, consisting of up to three interferometers, which will be capable of micro-arc second resolution. Alignment knowledge of the three interferometer baselines requires a three-dimensional, 14-leg truss with each leg being monitored by an external metrology gauge. In addition, each of the three interferometers requires an internal metrology gauge to monitor the optical path length differences between the two sides. Both external and internal metrology gauges are interferometry based, operating at a wavelength of 1319 nanometers. Each gauge has fiber inputs delivering measurement and local oscillator (LO) power, split into probe-LO and reference-LO beam pairs. These beams experience power loss due to a variety of mechanisms including, but not restricted to, design efficiency, material attenuation, element misalignment, diffraction, and coupling efficiency. Since the attenuation due to these sources may degrade over time, an accounting of the range of expected attenuation is needed so an optical power margin can be book kept. A method of statistical optical power analysis and budgeting, based on a technique developed for deep space RF telecommunications, is described in this paper and provides a numerical confidence level for having sufficient optical power relative to mission metrology performance requirements.

stellar interferometry↗
NASA NTRS1998

The Impact of FU Orionis Outbursts and the Solar Nebula

Protostellar systems are variable on many timescales. One of the most dramatic forms of variability known to occur in low mass stellar systems is the FU Orionis outburst (Herbig 1977). Throughout a typical outburst lasting several decades, system luminosities may be a hundred times what is typical of the quiesent state. FU Orionis outburst events are thought to have significant impact on the thermal structure of the protosolar nebula; their existence has been used to explain features in the meteoritic record from thermally induced homogenization to the formation of chondrules. Until recently, the magnitude of the likely effect from such outbursts has been largely speculative due to the lack of a detailed understanding of the outburst mechanism. Recent numerical models (Bell\& Lin 1994) have demonstrated the viability of the observational hypothesis (Hartmann\& Kenyon 1985) that the radiation observed during outburst is emitted by a luminous circumstellar disk transporting mass at a thousand times the quiesent rate. Light curves and color and line width evolution observed in FU Orionis systems are naturally explained by time dependent outbursting model disks (Bell et al. 1995). The radial temperature structure and shape of the disk during outburst derived from these models may be used to calculate the outburst's expected impact on primitive material at various radii throughout the disk. In this review, we will begin by discussing what is known about the FU Orionis outburst phenomenon from recent observations and theory including statistically deduced outburst timescales and observed peak temperatures. Unless covered by another author, we will discuss the evidence which suggests that outburst radiation is emitted by a circumstellar disk rather than by the star and will briefly review the thermal instability as a mechanism for outburst. We will then report on recent work which investigates the likely heating of solar nebula material due to FU Orionis outbursts including the following effects: (1) heating of the planet forming region by direct radiation from the hot inner nebula; (2) heating by the diffuse radiation field of a coccooning envelope; and (3) time-dependent penetration of the increased luminosity from the above sources into the optically thick nebula. Some of this work is currently in progress. The potential effects on condensation and migration in the nebula and the thermal processing of solids will be evaluated.

Bell, Robbins↗
NASA NTRS1980

Pulsar and diffuse contributions to the observed galactic gamma radiation

With the acquisition of satellite data on the energy spectrum of galactic gamma-radiation, it is clear that such radiation has a multicomponent nature. A calculation of the pulsar gamma ray emission spectrum is used together with a statistical analysis of recent data on 328 known pulsars to make a new determination of the pulsar contribution to galactic gamma ray emission. The contributions from diffuse interstellar cosmic ray induced production mechanisms to the total emission are then reexamined. It is concluded that pulsars may account for a significant fraction of galactic gamma ray emission.

Harding, A. K.↗
NASA NTRS1985

Hadron thermodynamics in relativistic nuclear collisions

Various phenomenological models based on statistical thermodynamical considerations were used to fit the experimental data at high P sub T to a two temperature distribution. Whether this implies that the two temperatures belong to two different reaction mechanisms, or consequences of Lorentz-contraction factor, or related in a fundamental way to the intrinsic thermodynamics of Space-Time can only be revealed by further theoretical and experimental investigations of high P sub T phenomena in extremely energetic hadron-hadron collisions.

Ammiraju, P.↗
NASA NTRS2000

Effect of Oxide Interface Roughness on the Threshold Voltage Fluctuations in Decanano MOSFETs with Ultrathin Gate Oxides

In this paper we use the Density Gradient (DG) simulation approach to study, in 3-D, the effect of local oxide thickness fluctuations on the threshold voltage of decanano MOSFETs on a statistical scale. The random 2-D surfaces used to represent the interface are constructed using the standard assumptions for the auto-correlation function of the interface. The importance of the Quantum Mechanical effects when studying oxide thickness fluctuations are illustrated in several simulation examples.

Asenov, Asen↗
NASA NTRS2004

Microstructural Evaluation of KM4 and SR3 Samples Subjected to Various Heat Treatments

The gamma-gamma microstructures of two advanced powder metallurgy disk alloys, KM4 and SR3, were quantified after a series of heat treatments using transmission electron microscopy and image analysis. Relationships between the heat treatments and the resulting gamma distributions were evaluated. Statistical correlations between the gamma distributions and the reported tensile strengths, creep resistances, and dwell crack growth resistances were separately assessed for each alloy. To avoid the effects of grain size related mechanisms, the grain size of the samples used in the correlations for each alloy were limited to narrow ranges of about 1.5 in ASTM grain size number. In both alloys, yield and tensile strength increased with increasing fraction of medium sized gamma. The strength increased as the size of the medium gamma decreased and the size of the fine gamma increased. Time to 0.2 percent creep in SR3 increased with increasing medium gamma volume fraction, and decreasing fine gamma sizes. However, 0.2 percent creep time was not clearly correlated with the gamma microstructures of KM4 specimens, apparently due to effects of stabilization heat treatments which greatly suppress creep resistance. Dwell fatigue crack growth rate decreased with increasing medium gamma volume fraction, indicating more medium gamma is beneficial. The crack growth rate also decreased with decreasing gamma size, indicating finer gamma is better.

Ellis, David↗
NASA NTRS2024

Assessing Flash Characteristics in Lightning-Initiated Wildfire Events Between 1995 and 2020 Within the Contiguous United States

Twenty-six years of lightning data were paired with over 68,000 lightning-initiated wildfire (LIW) reports to understand lightning flash characteristics responsible for ignition in between 1995 and 2020. Results indicate that 92% of LIW were started by negative cloud-to-ground (CG) lightning flashes and 57% were single stroke flashes. Moreover, 62% of LIW reports did not have a positive CG within 10 km of the start location, contrary to the science literature’s suggestion that positive CG flashes are a dominant fire-starting mechanism. Nearly 1/3rd of wildfire events were holdovers, meaning one or more days elapsed between lightning occurrence and fire report. However, fires that were reported less than a day after lightning occurrence statistically burned more acreage. Peak current was not found to be a statistically significant delineator between fire starters and non-fire starters for -CGs but was for positive CGs. Results highlighted the need for reassessing the role of positive CG lightning and subsequently long continuing current in wildfire ignition started by lightning. One potential outcome of this study’s results is the development of real-time tools to identify ignition potential during lightning events to aid in fire mitigation efforts.

Christopher J Schultz↗
NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appear to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗
NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appears to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗
NASA NTRS1974

Martian cratering and central peak statistics - Mariner 9 results

Mariner 9 imagery shows that central peaked craters occur much more frequently in the Martian south polar region than in typical equatorial areas, and that both regions have crater size frequency distributions characteristic of saturation. Several arguments indicate that a preferential production mechanism, e.g., pingo formation made possible by subsurface permafrost confined to Martian polar regions, may account for the central peak excess in the south polar region.

Cordell, B. M.↗
NASA NTRS1977

Life-test methodology for mechanical components

System is based on examining and testing each part of item under evaluation to determine whether aging processes, wear, or other inherent failure modes are likely to limit life to less than that required. Procedure may be applied to many long-life devices where statistical reliability analysis would be impractical.

Dufrane, K. F.↗