Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SmallSat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

A CubeSat Asteroid Mission: Design Study and Trade-Offs

There is considerable interest in expanding the applicability of cubesat spacecraft into lightweight, low cost missions beyond Low Earth Orbit. A conceptual design was done for a 6-U cubesat for a technology demonstration to demonstrate use of electric propulsion systems on a small satellite platform. The candidate objective was a mission to be launched on the SLS test launch EM-1 to visit a Near-Earth asteroid. Both asteroid fly-by and asteroid rendezvous missions were analyzed. Propulsion systems analyzed included cold-gas thruster systems, Hall and ion thrusters, incorporating either Xenon or Iodine propellant, and an electrospray thruster. The mission takes advantage of the ability of the SLS launch to place it into an initial trajectory of C3=0. Targeting asteroids that fly close to earth minimizes the propulsion required for fly-by/rendezvous. Due to mass constraints, high specific impulse is required, and volume constraints mean the propellant density was also of great importance to the ability to achieve the required deltaV. This improves the relative usefulness of the electrospray salt, with higher propellant density. In order to minimize high pressure tanks and volatiles, the salt electrospray and iodine ion propulsion systems were the optimum designs for the fly-by and rendezvous missions respectively combined with a thruster gimbal and wheel system For the candidate fly-by mission, with a mission deltaV of about 400 m/s, the mission objectives could be accomplished with a 800s electrospray propulsion system, incorporating a propellant-less cathode and a bellows salt tank. This propulsion system is planned for demonstration on 2015 LEO and 2016 GEO DARPA flights. For the rendezvous mission, at a ΔV of 2000 m/s, the mission could be accomplished with a 50W miniature ion propulsion system running iodine propellant. This propulsion system is not yet demonstrated in space. The conceptual design shows that an asteroid mission is possible using a cubesat platform with high-efficiency electric propulsion.

cubesat↗
NASA NTRS2016

Simulation-To-Flight (STF-1): A Mission to Enable CubeSat Software-Based Validation and Verification

The Simulation-to-Flight 1 (STF-1) CubeSat mission aims to demonstrate how legacy simulation technologies may be adapted for flexible and effective use on missions using the CubeSat platform. These technologies, named NASA Operational Simulator (NOS), have demonstrated significant value on several missions such as James Webb Space Telescope, Global Precipitation Measurement, Juno, and Deep Space Climate Observatory in the areas of software development, mission operations/training, verification and validation (V&V), test procedure development and software systems check-out. STF-1 will demonstrate a highly portable simulation and test platform that allows seamless transition of mission development artifacts to flight products. This environment will decrease development time of future CubeSat missions by lessening the dependency on hardware resources. In addition, through a partnership between NASA GSFC, the West Virginia Space Grant Consortium and West Virginia University, the STF-1 CubeSat will hosts payloads for three secondary objectives that aim to advance engineering and physical-science research in the areas of navigation systems of small satellites, provide useful data for understanding magnetosphere-ionosphere coupling and space weather, and verify the performance and durability of III-V Nitride-based materials.

navigation↗
NASA NTRS2017

NASA's CubeQuest Challenge - From Ground Tournaments to Lunar and Deep Space Derby

The First Flight of NASA's Space Launch System will feature 13 CubeSats that will launch into cis-lunar space. Three of these CubeSats are winners of the CubeQuest Challenge, part of NASA's Space Technology Mission Directorate (STMD) Centennial Challenge Program. In order to qualify for launch on EM-1, the winning teams needed to win a series of Ground Tournaments, periodically held since 2015. The final Ground Tournament, GT-4, was held in May 2017, and resulted in the Top 3 selection for the EM-1 launch opportunity. The Challenge now proceeds to the in-space Derbies, where teams must build and test their spacecraft before launch on EM-1. Once in space, they will compete for a variety of Communications and Propulsion-based challenges. This is the first Centennial Challenge to compete in space and is a springboard for future in-space Challenges. In addition, the technologies gained from this challenge will also propel development of deep space CubeSats.

CubeSats↗
NASA NTRS2020

Chapter 15: Propulsion System

During mission design, many trades are made that have varying levels of impact on the spacecraft. The types of subsystems that are selected affect the spacecraft mass,volume, power, and cost. Choosing the right propulsion system for a CubeSat mission is key to that mission’s success. There are many CubeSat propulsion systems on the market today. The CubeSat community desires to understand how to assess the available propulsion systems and how to apply them to their mission designs. The purpose of this chapter is to inform the reader of the key factors that must be considered when evaluating and applying these systems for various missions.

CubeSat↗
NASA NTRS2020

NASA Access 2 Space Workshop: Summary Report: Increased Science Return through Rideshare

This report summarizes the Access to Space (A2S) Workshop held on February 25-27, 2020 at the Johns Hopkins University Applied Physics Laboratory (APL) and hosted by NASA’s Science Mission Directorate (SMD). This workshop solicited community input on the creation and management of an ESPA-class1payload pipeline for NASA SMD launches. The workshop brought together roughly 180 participants including scientists, engineers, instrument developers, launch providers, and policy makers across NASA centers, government agencies, commercial industry, research institutes, and academia.

ESPA-Class Spacecraft↗
NASA NTRS2022

S-band Network Analysis and Strategies for LEO Multi-CubeSat Science Missions

This paper presents the network architecture utilized at NASA’s Goddard Space Flight Center (GSFC) to support a mission set of five 6U CubeSats. These five CubeSats employ a multi-waveform Software Defined Radio (SDR) platform developed by Vulcan Wireless for use with NASA’s Space Relay (SR) and Direct to Earth (DTE) networks. The performance testing of the SDR is discussed via a comprehensive S-band and communication link analysis. The tested capabilities of the SDR and antenna components are reviewed in terms of the mission requirements for each CubeSat. Size Weight and Power (SWaP), required availability, and access times are discussed. The measured data from experimental compatibility testing is incorporated into detailed simulations of the CubeSat mission set to verify desired performance over the mission lifetime. The model is also used to investigate the impact of potential adverse effects on the communication links such as interference and weather conditions. This paper also reviews potential improvements from future technological advances and commercial partnerships. A collaborative investigation between GSFC and Oklahoma State University is presented in which a qualitative analysis of Hybrid RF/Optical communication strategies is performed. The data rate improvements of optical communication techniques are weighed against attitude control and science mission requirements for CubeSats, and network architectures/switching strategies are discussed. A separate analysis reviews the potential benefits of ground station partnerships, which aligns with NASA’s future goal to include commercial partners in its Earth and space network architectures, e.g. LunaNet.

Space networks↗
NASA NTRSDate not supplied

Moon Burst Energetics All-sky Monitor: A Beyond Earth-orbit Gamma-ray Burst Detector for Multi-Messenger Astronomy

Moon Burst Energetics All-sky Monitor (MoonBEAM) is a gamma-ray mission in a cislunar orbit to observe the entire sky instantaneously for relativistic astrophysical explosions. It is designed to explore the behavior of matter and energy under extreme conditions by observing the prompt emission from gamma-ray bursts, identifying the conditions capable of launching transient relativistic jets and the origins of high-energy radiation from the relativistic outflows. MoonBEAM provides essential gamma-ray observations for multi-messenger astronomy by reporting on the prompt emission and providing rapid alerts to the astronomical community for contemporaneous and follow-up observations. In this era of multi-messenger astronomy, simultaneous broadband observations of relativistic transients are needed to construct a comprehensive picture of compact mergers and energetic phenomena, which is a key goal of the Astro2020 decadal survey theme New Windows on the Dynamic Universe. MoonBEAM provides the sensitive high-energy all-sky observation that is critical to transient and multi-messenger astronomy.

Gamma-rayburst↗
NASA NTRSDate not supplied

Flight and Direct to Earth/Space Relay Communication System Architecture for GSFC CubeSat Missions

The CubeSat platform is finding increasing use in space science applications due to its low cost and comparative ease of launch. It is becoming a key scientific discovery tool in low Earth orbit (LEO) and beyond, including geosynchronous equatorial orbit (GEO), the Lagrange Points, Lunar missions, and more. The increasing complexity of these missions and their scientific goals must be supported by equal advancements in communications technology. Higher data rates and greater reliability are required every year. However, the reduced Size, Weight, and Power (SWaP) constraints of CubeSat platforms introduce unique challenges in the area of satellite communications. There is currently a lack of communication equipment tailored specifically to the CubeSat platform. This lack of standardized, tested equipment extends development time and reduces mission confidence. Furthermore, missions utilizing the CubeSat platform are often subject to more difficult design constraints. Antenna placement, size, and pointing are often subordinate to the requirements of the payload instruments and mission goals. Traditional link margin estimation techniques are insufficient in these cases, as they emphasize worst case scenarios. In reality the actual link parameters may vary widely even during a single pass. This presents new challenges in predicting communications performance and scheduling ground station contacts, but also new opportunities for improving efficiency. This paper presents the integration, testing, and validation process for a new software defined radio (SDR) designed for the CubeSat platform in conjunction with Vulcan Wireless, Inc. The SDR is planned for use on 5 upcoming CubeSat missions at NASAs Goddard Space Flight Center (GSFC) including a Geosynchronous Transfer Orbit (GTO) mission and it may also serve as a standard and well-tested option for future missions by enabling a standardized, rapid and low cost CubeSat communication system network integration process. Detailed simulations have been developed to estimate the communication performance of these missions, taking the unique antenna placements and attitude behavior of each satellite into account. These simulations allow a much more accurate analysis of the expected link margin, which varies considerably during each pass for the NASA Space Relay (SR) and Direct to Earth (DTE) network. The modelling procedures are outlined, and the results are used to predict communications performance of the missions.

Space Networks↗
NASA NTRSDate not supplied

Quality Practices for Highly-Constrained Projects

The presentation provides guidance and recommendations for the implementation of quality practices for space system development projects that have constraints, such that the full suite of traditional or "best" standard practices cannot be applied.

Streamlined quality↗
NASA NTRS2023

Channel Measurements for Switching Strategies in Hybrid RF/Optical Communications

Free space optical (FSO) communication links increase data rate, reduce size and power, and increase security. These criteria are particularly important in space communication. Increasing mission complexity and crowding of lower frequency bands is driving the need for optical communications. This makes FSO communication technology extremely attractive, and there is significant ongoing work towards the development of FSO transceivers, ground stations, and relays. Notable projects include the Laser Communications Relay Demonstrator (LCRD), Integrated LCRD Low-Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T), and CubeSat Laser Infrared Crosslink (CLICK) CubeSats. These technologies will eventually operate in unison with existing Radio Frequency (RF) systems, but there is little experimental investigation of such hybrid networks. This paper presents some experimental underpinnings of switching strategies for hybrid RF/FSO systems in various attenuation conditions. A 170 m optical path was constructed in an enclosed test chamber where atmospheric conditions can be tightly controlled. The performance of a 1550 nm infrared FSO link was evaluated in this chamber under varying conditions of turbulence and jitter. The system will eventually be used to investigate switching criteria between the FSO and RF channels. Optimizing the use of RF/FSO communication links will allow data rate, size, power, and security improvements. Therefore, this research will help to mature the network architecture and improve the performance of communication networks to be used for LEO, GEO, Lagrange, Lunar missions and beyond.

Space Networks↗