Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shape memory alloy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Pulsed high-magnetic-field experiments: New insights into the magnetocaloric effect in Ni-Mn-In Heusler alloys

The present pulsed high-magnetic-field study on Ni{sub 50}Mn{sub 35}In{sub 15} gives an extra insight into the thermodynamics of the martensitic transformation in Heusler shape-memory alloys. The transformation-entropy change, ΔS, was estimated from field-dependent magnetization experiments in pulsed high magnetic fields and by heat-capacity measurements in static fields. We found a decrease of ΔS with decreasing temperature. This behavior can be understood by considering the different signs of the lattice and magnetic contributions to the total entropy. Our results further imply that the magnetocaloric effect will decrease with decreasing temperature and, furthermore, the martensitic transition is not induced anymore by changing the temperature in high magnetic fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigations on the electronic transport and piezoresistivity properties of Ni{sub 2−X}Mn{sub 1+X}Ga (X = 0 and 0.15) Heusler alloys under hydrostatic pressure

The resisitivity of Ni{sub 2−X}Mn{sub 1+X}Ga (X = 0 and 0.15) magnetic shape memory alloys has been investigated as a function of temperature (4–300 K) and hydrostatic pressure up to 30 kilobars. The resistivity is suppressed (X = 0) and enhanced (X = 0.15) with increasing pressure. A change in piezoresistivity with respect to pressure and temperature is observed. The negative and positive piezoresistivity increases with pressure for both the alloys. The residual resistivity and electron-electron scattering factor as a function of pressure reveal that for Ni{sub 2}MnGa the electron-electron scattering is predominant, while the X = 0.15 specimen is dominated by the electron-magnon scattering. The value of electron-electron scattering factor is positive for both the samples, and it is decreasing (negative trend) for Ni{sub 2}MnGa and increasing (positive trend) for X = 0.15 with pressure. The martensite transition temperature is found to be increased with the application of external pressure for both samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Digital Manufacturing of Gradient Meshed SOFC Sealing Composites with Self-Healing Capabilities

Solid oxide fuel cells (SOFC) hold great promise for clean power generation. However, high temperature stability and long term durability of the SOFC components have presented serious problems in SOFC technological advancement and commercialization. The seals of the fuel cells are the most challenging area to address. A high temperature gas seal is highly needed which is durable against cracking and gas leakage during thermal cycling and extended operation. This project investigates a novel composite seal by integrating 3D printed shape memory alloy (SMA) wires into a glass matrix. The SMA we use is TiNiHf and the glass matrix we use is SrO-La{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-B{sub 2}O{sub 3}-SiO{sub 2} (SLABS). Dilatometry shows to be an extremely useful tool in providing the CTEs. It pinpoints regions of different CTEs under simulated SOFC thermal cycles for the same glass. For the studied SLABS glass system, the region with the greatest CTE mismatch between the glass seal and the adjacent components is 40-500 C, the typical heating and cooling regions for SOFCs. Even for low temperature SOFC development, this region is still present and needs to be addressed. We have demonstrated that the proposed SLABS glass has great potential in mitigating the thermal expansion mismatch issues that are limiting the operation life of SOFCs. TiNiHf alloy has been successfully synthesized with the desired particle size for the 3DP process. The TiNiHf SMA shape memory effect very desirably overlaps with the problematic low CTE region of the glass. This supports the design intent that the gradient structure transition, phase transformation toughening, and self-healing of the SMA can be utilized to mitigate/eliminate the seal problem. For the 3DP process, a new binder has been identified to match with the specific chemistry of the SMA particles. This enables us to directly print SMA particles. Neutron diffraction shows to be an extremely useful tool in providing information regarding the austenite to martensite phase transformation, SMA alloy lattice constant change, and the corresponding thermal stress from the glass matrix. It pinpoints regions of SMA phase transformation and the thermal stress effect under simulated SOFC thermal cycles. The bilayer test shows that there is still much work to be done for the proper integration of the seal components. Large scale production should lower the cost associated with the proposed approach, especially on the raw material cost and 3D printing.

30 DIRECT ENERGY CONVERSION↗

Seismic Protection of an Ancient Aqueduct Using SMA Devices

The effectiveness of the use of Cu-based shape memory alloy (SMA) prestressing devices on an ancient aqueduct is examined in this paper. The dynamic characteristics of the aqueduct were measured within the span of three years and computational models were developed that matched very closely its dynamic behaviour. Using this as a bench mark, SMA prestressing devices were applied on the structure and the effects on its dynamic characteristics were assessed. It was noted that the SMA prestressing devices have a significant effect on the dynamic response of the structure. This is attributed to the stiffening of the structure due to the increase in contact between the masonry units and hence the increase of its stiffness through the increase of the modulus of elasticity of the masonry matrix. It can be concluded that the SMA prestressing devices can provide an inconspicuous means of stiffening masonry structures and increase their resistance to earthquake loads.

58 GEOSCIENCES↗

Thin film NiTi coatings on optical fiber Bragg sensors

This paper describes the sputter deposition and characterization of nickel titanium (NiTi) thin film shape memory alloy onto the surface of an optical fiber Bragg grating. The NiTi coating uniformity, crystallinity, and transformation temperatures are measured using scanning electron microscope, x-ray diffraction, and differential scanning calorimeter, respectively. The strain in the optical fiber is measured using centroid calculation of wavelength shifts. Results show distinct and abrupt changes in the optical fiber signal with the four related transformation temperatures represented by the austenite-martensite forward and reverse phase transformations. These tests demonstrate a coupling present between optical energy and thermal energy, i.e., a modified multiferroic material.

36 MATERIALS SCIENCE↗

An in situ neutron diffraction study of anomalous superelasticity in a strain glass Ni 43 Fe 18 Ga 27 Co 12 alloy

Superelastic behavior is traditionally related to the martensitic transition with a collective transformation scenario in some shape memory alloys. A kind of quasi-linear superelasticity accompanied by a finite avalanche or confined martensitic transformation was recently found in some alloy systems with strain glass state. Here, an in situ neutron diffraction technique was used to study the deformation behavior in an Ni 43 Fe 18 Ga 27 Co 12 alloy with strain glass state in order to reveal the new intrinsic physical nature of the quasi-linear superelasticity. A significant modulus softening prior to the stress-induced martensitic transformation was observed during compression in the studied alloy, which is similar to the characteristics exhibited in the tweed precursor phenomena prior to temperature-induced martensitic transformation. Moreover, the diffraction peak broadening was further shown during the elastic stage of deformation for both single-crystal and polycrystalline samples, which mainly stems from the short-range fluctuation in the strain field inside each grain based on Williamson–Hall analysis. The authors believe that there exists a spatial heterogeneity in the modulus of the confined martensitic transformation alloy.

Zhang, Q. H.↗

An in-situ study of magnetic domain structures in undercooled Fe-29.5 at. %Pd magnetostrictive alloys by Lorentz microscopy and electron holography

Understanding of correlation between magnetic domain structure and functional properties is of importance for the magnetic field driven phase transition (e.g., martensitic transformation) or microstructure variation (e.g., twin boundary motion) materials. In this work, we report a Fe-29.5 at. %Pd shape memory alloy treated by undercooling processing upon a degree of 320 K below the liquid temperature. The effect of high undercooling on the solidified microstructure and martensitic transformation temperatures was investigated. By in-situ Lorentz transmission electron microscopy and electron holography, magnetic domain structure and the field-induced domain wall motion behavior in as-cast and undercooled samples have been schematically studied. The irregular domain structure can be observed in these alloys. On the application of a field up to 300 Oe, the domain walls for both samples are able to move along the direction of the external magnetic field, but structural transition and rearrangement of variants are not observed in the undercooled alloy. The large magnetostriction of Fe-29.5 at. %Pd undercooled alloy originates from the irregular domain walls motion instead of the rearrangement of martensitic twin variants.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Site preference of ternary alloying additions to NiTi: Fe, Pt, Pd, Au, Al, Cu, Zr and Hf

Atomistic modeling of the site substitution behavior of Pd in NiTi (J. Alloys and Comp. (2004), in press) has been extended to examine the behavior of several other alloying additions, namely, Fe, Pt, Au, Al, Cu, Zr and Hf in this important shape memory alloy. It was found that all elements, to a varying degree, displayed absolute preference for available sites in the deficient sublattice. How- ever, the energetics of the different substitutional schemes, coupled with large scale simulations indicate that the general trend in all cases is for the ternary addition to want to form stronger ordered structures with Ti.

Bozzolo, Guillermo↗

A helical actuator driven by biased SMA: design, model, and experiment

A helical actuator driven by biased shape memory alloy (SMA) patterns embedded into a soft composite ribbon base is presented in this work. Instead of common U-shape SMA wires, a single SMA wire is woven into planar patterns, which enable helical deformation of the composite ribbon from an initially flat geometry. An analytical static model is established for accurate and rapid prediction of the helical reconfiguration arising from the shape memory effect of woven SMA patterns, followed by validation of the static model using the finite element method (FEM). The finite element results are compared with the analytical solutions given by this static model, which show a high agreement. Parametric study of the influences of eight independent design variables on the dependent helical parameters, such as combined curvatures, pitches, and helical angles, is completed. It is found that the helically deformed geometry is mainly dominated by diameters, biased positions, inclined angles, and numbers of skewed segments of the SMA wire. Fabrication and in-situ experimental test of a prototype of such helical actuators qualitatively demonstrate its dramatic three-dimensional (3D) spiral reconfiguration from a two-dimensional (2D) flat ribbon. In conclusion, such SMA patterns will allow more diverse designs of soft actuators for a wider range of robotic applications.

36 MATERIALS SCIENCE↗

SU-F-J-10: Sliding Mode Control of a SMA Actuated Active Flexible Needle for Medical Procedures

Purpose: In medical interventional procedures such as brachytherapy, ablative therapies and biopsy precise steering and accurate placement of needles are very important for anatomical obstacle avoidance and accurate targeting. This study presents the efficacy of a sliding mode controller for Shape Memory Alloy (SMA) actuated flexible needle for medical procedures. Methods: Second order system dynamics of the SMA actuated active flexible needle was used for deriving the sliding mode control equations. Both proportional-integral-derivative (PID) and adaptive PID sliding mode control (APIDSMC) algorithms were developed and implemented. The flexible needle was attached at the end of a 6 DOF robotic system. Through LabView programming environment, the control commands were generated using the PID and APIDSMC algorithms. Experiments with artificial tissue mimicking phantom were performed to evaluate the performance of the controller. The actual needle tip position was obtained using an electromagnetic (EM) tracking sensor (Aurora, NDI, waterloo, Canada) at a sampling period of 1ms. During experiment, external disturbances were created applying force and thermal shock to investigate the robustness of the controllers. Results: The root mean square error (RMSE) values for APIDSMC and PID controllers were 0.75 mm and 0.92 mm, respectively, for sinusoidal reference input. In the presence of external disturbances, the APIDSMC controller showed much smoother and less overshooting response compared to that of the PID controller. Conclusion: Performance of the APIDSMC was superior to the PID controller. The APIDSMC was proved to be more effective controller in compensating the SMA uncertainties and external disturbances with clinically acceptable thresholds.

60 APPLIED LIFE SCIENCES↗

Pseudoelasticity at Large Strains in Au Nanocrystals

Pseudoelasticity in metals is normally associated with phase transformations (e.g., shape memory alloys) but has recently been observed in sub-10 nm Ag nanocrystals that rapidly recovered their original shape after deformation to large strains. The discovery of pseudoelasticity in nanoscale metals dramatically changes the current understanding of the properties of solids at the smallest length scales, and the motion of atoms at surfaces. However, it remains unclear whether pseudoelasticity exists in different metals and nanocrystal sizes. The challenge of observing deformation at atomistic to nanometer length scales has prevented a clear mechanistic understanding of nanoscale pseudoelasticity, although surface diffusion and dislocation-mediated processes have been proposed. We further the understanding of pseudoelasticity in nanoscale metals by using a diamond anvil cell to compress colloidal Au nanocrystals under quasihydrostatic and nonhydrostatic pressure conditions. Nanocrystal structural changes are measured using optical spectroscopy and transmission electron microscopy and modeled using electrodynamic theory. Here, we reveal that 3.9 nm Au nanocrystals exhibit pseudoelastic shape recovery after deformation to large uniaxial strains of up to 20%, which is equivalent to an ellipsoid with an aspect ratio of 2. Nanocrystal absorbance efficiency does not recover after deformation, which suggests that crystalline defects may be trapped in the nanocrystals after deformation.

36 MATERIALS SCIENCE↗

Modulation on Ni{sub 2}MnGa(001) surface

We report periodic modulation on (001) surface of Ni2MnGa ferromagnetic shape memory alloy. For the stoichiometric surface, analysis of the low energy electron diffraction (LEED) spot profiles shows that the modulation is incommensurate. The modulation appears at 200 K, concomitant with the first order structural transition to the martensitic phase.

36 MATERIALS SCIENCE↗

Shape-morphing composites with designed micro-architectures

Shape memory polymers (SMPs) are attractive materials due to their unique mechanical properties, including high deformation capacity and shape recovery. SMPs are easier to process, lightweight, and inexpensive compared to their metallic counterparts, shape memory alloys. However, SMPs are limited to relatively small form factors due to their low recovery stresses. Lightweight, micro-architected composite SMPs may overcome these size limitations and offer the ability to combine functional properties (e.g., electrical conductivity) with shape memory behavior. Fabrication of 3D SMP thermoset structures via traditional manufacturing methods is challenging, especially for designs that are composed of multiple materials within porous microarchitectures designed for specific shape change strategies, e.g. sequential shape recovery. We report thermoset SMP composite inks containing some materials from renewable resources that can be 3D printed into complex, multi-material architectures that exhibit programmable shape changes with temperature and time. Through addition of fiber-based fillers, we demonstrate printing of electrically conductive SMPs where multiple shape states may induce functional changes in a device and that shape changes can be actuated via heating of printed composites. As a result, the ability of SMPs to recover their original shapes will be advantageous for a broad range of applications, including medical, aerospace, and robotic devices.

36 MATERIALS SCIENCE↗

Shape-memory transformations of NiTi: Minimum-energy pathways between austenite, martensites, and kinetically limited intermediate states

NiTi is the most used shape-memory alloy, nonetheless, a lack of understanding remains regarding the associated structures and transitions, including their barriers. Using a generalized solid-state nudge elastic band (GSSNEB) method implemented via density-functional theory, we detail the structural transformations in NiTi relevant to shape memory: those between body-centered orthorhombic (BCO) groundstate and a newly identified stable austenite (“glassy” B2-like) structure, including energy barriers (hysteresis) and intermediate structures (observed as a kinetically limited R-phase), and between martensite variants (BCO orientations). All results are in good agreement with available experiment. We contrast the austenite results to those from the often-assumed, but unstable B2. Furthermore, these high- and low-temperature structures and structural transformations provide much needed atomic-scale detail for transitions responsible for NiTi shape-memory effects.

36 MATERIALS SCIENCE↗

SU-F-T-505: A Novel Approach for Sparing Critical Organs at Risk for Cancer Patients Undergoing Radiation Oncology Treatments

Purpose: A major goal of an effective radiation treatment plan is to deliver the maximum dose to the tumor while minimizing radiation exposure to the surrounding normal structures. For example, due to the radiation exposure to neighboring critical structures during prostate cancer treatment, a significant increase in cancer risk was observed for the bladder (77%) and the rectum (105%) over the following decade. Consequently, an effective treatment plan necessitates limiting the exposure to such organs which can best be achieved by physically displacing the organ at-risk. The goal of this study is to present a prototype for an organ re-positioner device designed and fabricated to physically move the rectum away from the path of radiation beam during external beam and brachytherapy treatments. This device affords patient comfort and provides a fully controlled motion to safely relocate the rectum during treatment. Methods: The NiTi shape memory alloy was designed and optimized for manufacturing a rectal re-positioner device through cooling and heating the core alloy for its shaping. This has been achieved through a prototyped custom designed electronic circuit in order to induce the reversible austenitic transformation and was tested rigorously to ensure the integrity of the actuated motion in displacement of the target anatomy. Results: The desirable NiTi shape-setting was configured for easy insertion and based on anatomical constraint. When the final prototype was evaluated, accuracy and precision of the maximum displacement and temperature changes revealed that the device could safely be used within the target anatomy. Conclusion: The organ re-positioner device is a promising tool that can be implemented in clinical setting. It provides a controlled and safe displacement of the delicate organ(s) at risk. The location of the organ being treated could also be identified using conventional onboard imaging devices or MV imaging available on-board most modern clinical accelerators.

60 APPLIED LIFE SCIENCES↗

In situ Lorentz TEM magnetization studies on a Fe-Pd-Co martensitic alloy.

Understanding domain wall pinning centers and the resultant mobility of ferroic (ferromagnetic and ferroelastic) walls under an applied magnetic field is of central importance to actuator applications of magnetic shape memory alloys. The movement of ferroic boundaries in a twinned Fe-Pd-Co martensite was analyzed by means of Lorentz mode transmission electron microscopy. An in situ magnetizing sample-holder was used to record the evolution of the magnetic domain structure as a function of the applied field. Fresnel images were recorded at different field values and a phase reconstruction algorithm was used to map the magnetization configuration inside the foil. The motion of magnetic domain walls was found to be strongly influenced by the presence of twin boundaries. Free-standing domain walls became mobile at fields as low as 15 Oe, whereas an order of magnitude higher field was required to depin domain walls that coincided with twin boundaries. The domain wall motion was completely reversible with a notable hysteresis.

36 MATERIALS SCIENCE↗

Tuning martensitic transformations via coherent second phases in nanolaminates using free energy landscape engineering

In this work we explore the possibilities and limitations of using a coherent second phase to engineer the thermo-mechanical properties of a martensitic alloy by modifying the underlying free energy landscape that controls the transformation. We use molecular dynamics simulations of a model atomistic system where the properties of a coherent, nanoscale second phase can be varied systematically. With a base martensitic material that undergoes a temperature-induced transformation from a cubic austenite to a monoclinic martensite, simulations show significant ability to engineer the transformation temperatures, from a ~50% reduction to a ~200% increase, with 50 at.% of the cubic second phase. We establish correlations between the properties of the second phase, the transformation characteristics, and the microstructure via the free energy landscape of the twophase systems. Coherency stresses have a strong influence on the martensitic variants observed and can even cause the non-martensitic second phase to undergo a transformation. Reducing the stiffness of the second phase increases the transformation strain and modifies the martensitic microstructure, increasing the volume fraction of the transformed material. This increase in transformation strain is accompanied by a significant increase in Af and thermal hysteresis, while Ms remains unaltered. Our findings on the tunability of martensitic transformations can be used for informed searches of second phases to achieve desired material properties, such as achieving room temperature, lightweight shape memory alloys.

36 MATERIALS SCIENCE↗

The Mechanism of Influence of Disperse Nanoparticles on Parameters of the Martensitic Transitions in Alloys with the Shape Memory Effect

Within the diffuse martensitic transition theory based on the thermodynamic and kinetic equations and relations, the mechanism of influence of disperse nanoparticles on the parameters of martensitic transitions in alloys with the shape memory effect (SME) is analyzed. The objects of the analysis are the TiNi alloy with the varied sizes of Ti{sub 3}Ni{sub 4} particle at their constant volume concentration, and the NiMnGaTb alloy with Tb precipitate particles with constant sizes and variation of volume concentration of the precipitates. Information about these alloys is available in the literature. The analysis has shown that, due to the coherent coupling of the Ti{sub 3}Ni{sub 4} particles with the substrate, the temperature width of the transition R–B19' depends on the particle sizes, which confirms the earlier established regularity of the local interior strain influence on this parameter. Concerning the NiMnGaTb alloy, the analysis has shown that, due to the presence of interior local strains associated with the Tb particles, the temperature width of the martensitic transformations increases linearly alongside the growth of the particle concentration in the alloy. The existence of the critical value of the particle concentration, above which the temperature width of the transition becomes indefinitely large, and the martensitic transformation in the alloy is blocked, is shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗