Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRENGTH CALCULATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Spectroscopy of 10 N with the invariant-mass method

Proton decays of $^{10}$N states has been investigated with the invariant-mass technique using data from two reactions. In the first experiment, $^{10}$N states were created via multi-nucleon knockout from a fast $^{13}$O beam. The second experiment involved proton pickup from a $^9$Be target to a fast $^9$C beam. Both data sets produce similar distributions with a peak centered at a decay energy of 2.8 MeV and a width of $\approx 2.5$ MeV. This result is consistent with a previous study using multi-nucleon transfer reaction which was originally fit with an $\ell$ = 0 resonance but later interpreted as an $\ell$=1 resonance. This later interpretation is affirmed as the proton pickup reaction should favor $\ell$ = 1. This strength is located near the predicted energies of two $\ell$ = 1 resonances in calculations using complex scaling and the Gamow shell model. Furthermore, the multi-nucleon knockout data also show excess strength below the main peak which is interpreted as contributions from one or more $\ell$ = 0 resonances.

6 ≤ A ≤ 19↗
NASA NTRS1974

On thermal stress failure of the SNAP-19A RTG heat shield

Results of a study on thermal stress problems in an amorphous graphite heat shield that is part of the launch-abort protect system for the SNAP-19A radio-isotope thermoelectric generators (RTG) that will be used on the Viking Mars Lander are presended. The first result is from a thermal stress analysis of a full-scale RTG heat source that failed to survive a suborbital entry flight test, possibly due to thermal stress failure. It was calculated that the maximum stress in the heat shield was only 50 percent of the ultimate strength of the material. To provide information on the stress failure criterion used for this calculation, some heat shield specimens were fractured under abort entry conditions in a plasma arc facility. It was found that in regions free of stress concentrations the POCO graphite heat shield material did fracture when the local stress reached the ultimate uniaxial stress of the material.

Pitts, W. C.↗
NASA NTRS1991

Effects of bolt-hole contact on bearing-bypass damage-onset strength

A combined experimental and analytical study was conducted to investigate the effects of bolt-hole contact on the bearing bypass strength of a graphite-epoxy laminate. Tests were conducted on specimens consisting of 16-ply quasi-isotropic T300/5208 laminates with a centrally located hole. Bearing loads were applied through a clearance-fit steel bolt. Damage onset strength and damage mode were determined for each test case. A finite element procedure was used to calculate the bolt-hole stresses and bolt contact for each test case. A finite element procedure was used to calculate the bolt-hole stresses and bolt contact for each measured damage-onset strength. For the tension bearing-bypass cases tested, the bolt contact half-angle was approximately 60 degrees at damage onset. For compression, the contact angle was 20 degrees as the bypass load increased. A corresponding decrease in the bearing damage onset strength was attributed to the decrease in contact angle which made the bearing loads more severe. Hole boundary stresses were also computed by superimposing stresses for separate bearing and bypass loading. Stresses at the specimen net section were accurately approximated by the superposition procedure. However, the peak bearing stresses had large errors because the bolt contact angles were not represented correctly. For compression, peak bearing stress errors of nearly 50 percent were calculated.

Crews, John H., Jr.↗
NASA NTRS1987

Blade-vortex interaction

A conformal transformation and discrete vortex dynamics are used to calculate the interaction of a blade with vortices drifting with the free stream. An unsteady Kutta condition is employed to dictate the strength of vortices shed at the trailing edge. Instantaneous pressure distributions are calculated and compared with earlier experimental and analytical data.

Poling, David R.↗
NASA NTRS1946

Strength Investigations in Aircraft Construction Under Repeated Application of the Load

In the calculation of the dimensions of modern machines and building constructions, account is taken of the frequency of the occurrence of the anticipated loads. It is generally assumed that these loads will be repeated an infinite number, or at any rate some millions, of times during the total working life of the construction, When calculating the dimensions of the structural parts of aircraft, on the contrary, a consideration only of those frequencies in the appearance of the loads which actually come into play in the various states of stress is allowable. This is because in aircraft construction it is absolutely essential not only to ensure adequate structural strength but also to keep down the structural weight to the lowest possible limit, Strength tests in which this requirement is directly taken into account have recently been carried out by the DVL Material Strength Department.

Gassner, E.↗
DOE OSTI2020

Using simultaneous x-ray diffraction and velocity interferometry to determine material strength in shock-compressed diamond

We determine the strength of laser shock-compressed polycrystalline diamond at stresses above the Hugoniot elastic limit using a technique combining x-ray diffraction from the Linac Coherent Light Source with velocity interferometry. X-ray diffraction is used to measure lattice strains, and velocity interferometry is used to infer shock and particle velocities. These measurements, combined with density-dependent elastic constants calculated using density functional theory, enable determination of material strength above the Hugoniot elastic limit. Furthermore, our results indicate that diamond retains approximately 20 GPa of strength at longitudinal stresses of 150–300 GPa under shock compression.

36 MATERIALS SCIENCE↗
NASA NTRS1996

Line Coupling in Atmospheric Spectra

The theoretical modeling of atmospheric spectra is important for a number of different applications: for instance, in the determination of minor atmospheric constituents such as ozone, carbon dioxide, CFC's etc.; in monitoring the temperature profile for climate studies; and in measuring the incoming and outgoing radiation to input into global climate models. In order to accomplish the above mentioned goal, one needs to know the spectral parameters characterizing the individual spectral lines (frequency, width, strength, and shape) as well as the physical parameters of the atmosphere (temperature, abundances, and pressure). When all these parameters are known, it is usually assumed that the resultant spectra and concomitant absorption coefficient can then be calculated by a superposition of individual profiles of appropriate frequency, strength and shape. However, this is not true if the lines are 'coupled'. Line coupling is a subtle effect that takes place when lines of a particular molecule overlap in frequency. In this case when the initial states and the final states of two transitions are connected by collisions, there is a quantum interference resulting in perturbed shapes. In general, this results in the narrowing of Q-branches (those in which the rotational quantum number does not change), and vibration-rotational R- and P branches (those in which the rotational quantum number changes by +/- 1), and in the spectral region beyond band heads (regions where the spectral lines pile up due to centrifugal distortion). Because these features and spectral regions are often those of interest in the determination of the abundances and pressure-temperature profiles, one must take this effect into account in atmospheric models.

Tipping, R. H.↗
DOE OSTI2025

Pd–Methyl Bond Energy─Property Correlations, Noncorrelations, Machine Learning Models, and Application to Polymerization Catalysis

Metal–carbon bonds are a key intermediate in a variety of homogeneous organometallic transformations and often determine the critical thermodynamics and kinetics of catalytic processes. Surprisingly, the influence of different ligands on metal–carbon bond strengths has been largely overlooked. Here, in this study, we evaluated nearly 700 experimental Pd–methyl complexes by calculating their bond dissociation energies using density functional theory (DFT) and compared these bond strengths to several fundamental molecular properties, and this revealed several surprising correlations and noncorrelations. Most surprising was that several fundamental properties, such as the bond length, bond force constant, and bond electron density, have no correlation with bond strength, despite these correlations often holding for main-group compounds. We were indeed able to identify key ligand-dependent chemical features/descriptors that provided a highly accurate machine learning model and provided insight into the general factors that control the Pd–carbon bond strength, such as radical delocalization and nucleophilicity. Insights gained from the Pd–Me bond energy analysis were then applied to CO migratory insertion steps that are part of copolymerization reactions.

binding energy↗
NASA NTRS1988

Electron density-sensitive line ratios for Fe XII in the solar corona

The collision strengths for electron-impact excitation of fine-structure transitions from the ground 3s23p3 configuration to the excited 3s3p4 configuration in Fe XII are presented. These are calculated by transforming the K-matrices obtained in a nonrelativistic R-matrix method to K-matrices in intermediate coupling using term-coupling coefficients which take into account the effect of breakdown of target LS coupling. Extensive configuration-interaction wave functions are used to represent the target states. The effective collision strengths are determined assuming a Maxwellian distribution of electron energies. Rydberg series of resonances converging to the excited state thresholds are explicitly included in the calculation. The relative level populations and emission-line strengths for Fe XII are calculated using the new atomic data presented in this paper and that published by Tayal, Henry, and Pradhan (1987) and Tayal and Henry (1986) over a wide range of electron densities and temperatures (1-2 x 10 to the 6th K). Present results for collision strengths and emission-line strengths are compared with the previous calculation of Flower (1977). Some significant differences are noted.

Tayal, S. S.↗
DOE OSTI2021

Composites and additive manufacturing for high-field coil supports for stellarators

The utilization of composites layered on an additive manufactured substrate, for the production of coil supports for modular coils in small or middle size experimental stellarators is assessed. The focus of the study is a monolithic coil support comprising the coils of a half-period of a stellarator, somewhat similar to the ones in UST_2 and ARIES-CS stellarators. However, the concept may be applicable to quasi-monolithic coil supports (coil forms of NCSX type) or individual coil casings (W7-X type).Coil supports for stellarators require high precision, stiffness and strength for large contorted parts. Traditionally, monolithic coil supports are produced by steel casting/forging and final machining. This production method and material gives accurate, stiff and strong coil supports, but the method may be expensive for monolithic supports due to the geometrical complexity and required accuracy of the structure. In relation to those matters, this work investigates whether a monolithic coil support comprising an additive manufactured resin substrate, which is externally (outward from the coils) surrounded with a thick layer of fibre-reinforced resin, may achieve enough strength and stiffness under middle/high magnetic fields. Finite element calculations are produced to obtain the direction of the principal stresses and their values in compression and tension at different areas of the monolithic support, which is relevant for anisotropic materials. The feasibility of directional application of (carbon) fibres on the winding surface of the stellarator outward from the coils is experimentally tested on a scaled-down additively manufactured prototype of a monolithic support. The strength and stiffness of the composite structure appears sufficient for common magnetic fields in experimental stellarators, and the 3D-composite design and manufacturing was technically feasible.

Queral, Vicente↗
NASA NTRS1982

Theoretical Model of the Effect of Crack Tip Blunting on the Ultimate Tensile Strength of Welds in 2219-T87 Aluminum

A theoretical model representing blunting of a crack tip radius through diffusion of vacancies is presented. The model serves as the basis for a computer program which calculates changes, due to successive weld heat passes, in the ultimate tensile strength of 2219-T81 aluminum. In order for the model to yield changes of the same order in the ultimate tensile strength as that observed experimentally, a crack tip radius of the order of .001 microns is required. Such sharp cracks could arise in the fusion zone of a weld from shrinkage cavities or decohered phase boundaries between dendrites and the eutectic phase, or, possibly, from plastic deformation due to thermal stresses encountered during the welding process. Microstructural observations up to X2000 (resolution of about .1 micron) did not, in the fusion zone, show structural details which changed significantly under the influence of a heat pass, with the exception of possible small changes in the configuration of the interdendritic eutectic and in porosity build-up in the remelt zone.

Beil, R. J.↗
DOE OSTI2021

Strength, deformation, and equation of state of tungsten carbide to 66 GPa

Here, strength, texture, and equation of state of hexagonal tungsten monocarbide (WC) have been determined under quasi-hydrostatic and non-hydrostatic compression to 66 GPa using angle-dispersive X-ray diffraction in the diamond anvil cell. Quasi-hydrostatic compression in a Ne pressure medium demonstrates that nanocrystalline WC is slightly less incompressible than bulk-scale WC, with respective bulk moduli of K 0 = 377 ± 7 and 397 ± 7 GPa and pressure derivatives K 0 ’ = 3.8 ± 0.3 and 3.7 ±0.3. This decrease in incompressibility with grain size is similar to behavior observed in other ceramics. Under nonhydrostatic compression, WC supports a mean differential stress of ~12-15 GPa at plastic yielding, which occurs at ~30 GPa. Strength in WC is anisotropic, with the (001) plane supporting 29-42% higher stress than stresses calculated from mean strain. Simulations using an Elasto-ViscoPlastic Self-Consistent model indicate that strength inferred from lattice strain theory may be overestimated due to effects of plastic deformation. Plastic deformation generates a texture maximum near $\langle\bar{2}110\rangle$ in the compression orientation, initially through prismatic slip on the {$10\bar{1}0$}$\langle\bar{1}2\bar{1}0\rangle$ and {$10\bar{1}0$}$\langle0001\rangle$ slip systems, followed by activation of pyramidal slip on {$10\bar{1}1$}$\langle\bar{2}113\rangle$ at ~40-50 GPa.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Excited states in semi-magic 82 Ge populated in the βn-decay of 83 Ga

For this work, the βn and β-decay of the neutron-rich 83 Ga isotopes produced in proton-induced fission of 238 U were studied at the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Laboratory using on-line mass separation and the hybrid-3Hen neutron-γ detector array. Excited states in semi-magic 82 Ge populated in βn decay of 83 Ga were identified using neutron-γ coincidences. The measured relative population of excited states in 82 Ge is compared with a βn emission model, where the neutron emission model combines the strength distribution obtained from the shell-model calculations with the statistical Hauser-Feshbach model.

3HEN↗
DOE OSTI2021

Strong Coupling Between Plasmons and Molecular Excitons in Metal–Organic Frameworks

This Letter describes strong coupling of densely packed molecular emitters in metal–organic frameworks (MOFs) and plasmonic nanoparticle (NP) lattices. Porphyrin-derived ligands with small transition dipole moments in an ordered MOF film were grown on Ag NP arrays. Angle-resolved optical measurements of the MOF-NP lattice system showed the formation of a polariton that is lower in energy and does not cross the uncoupled MOF Q 1 band. Modeling predicted the upper polariton energy and a calculated Rabi splitting of 110 meV. The coupling strength was systematically controlled by detuning the plasmon energy by changing the refractive index of the solvents infiltrating the MOF pores. Through transient absorption spectroscopy, we found that the lower polariton decays quickly at shorter time scales (<500 ps) and slowly at longer times because of energy transfer from the upper polariton. Furthermore, this hybrid system demonstrates how MOFs can function as an accessible excitonic material for polariton chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electronic Structure of Atomically Dispersed Supported Iridium Catalyst Controls Iridium Aggregation

Supported iridium complexes, Ir(C 2 H 4 ) 2 /support, were characterized by X-ray absorption spectroscopy during a temperature ramp to 120 °C in flowing H 2 . Iridium in complexes bonded to weak and moderate electron-donor supports, SiO 2 and γ-Al 2 O 3 , underwent aggregation, forming nanoparticles and clusters, respectively. When the support was a strong electron-donor (MgO), iridium remained site-isolated. Density functional theory calculations confirm the dependence of iridium–support bond strength on the support’s electron-donor character. Coating the SiO 2 -supported complexes with 1-n-ethyl-3-methyl-imidazolium acetate enhanced electron density on the iridium, hindering its aggregation. Finally, these results demonstrate opportunities for stabilizing atomically dispersed supported noble metals under reducing conditions by choice of support/ionic liquid sheath combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Quantum Light Imaging of the Plant Root─Rhizobacteria─System Using iLOV Fluorescence

It has been demonstrated recently that the use of specific quantum states of light for two-photon microscopy can lead to a substantial reduction of the intensity of light needed for the imaging of biological objects. This opens new ways to better understand the delicate mechanisms of the interactions of living organisms in the rhizosphere on an extended time scale without optical damage or alteration of their native behavior. Herein, we report a successful realization of entangled two-photon excited fluorescence microscopy of wheat plant roots and a set of biological samples, including purified iLOV protein, bacterial cells expressing iLOV, and combination of these under an extremely low excitation intensity. The entangled two-photon coupling strength of iLOV was modeled using electronic structure calculations which demonstrated that the FMN chromophore in the iLOV protein has an entangled two-photon absorption (ETPA) cross section that is large enough for imaging using weak quantum light for fluorescence excitation. Successful imaging of plant-associated Pantoea sp. YR343 cells expressing iLOV validates the feasibility of using iLOV as a molecular label for characterizing plant-microbe interactions based on entangled photon imaging. In conclusion, the results demonstrate the advantageous use of entangled photon imaging under noninvasive and nondestructive conditions.

Varnavksi, Oleg [Univ. of Michigan, Ann Arbor, MI ↗
DOE OSTI2025

Implementation of Perturbation Theory and Sensitivity Capabilities in Griffin

Griffin is a Multiphysics Object-Oriented Simulation Environment (MOOSE) based reactor Multiphysics analysis application, jointly developed by Argonne and Idaho National Laboratories under the DOE-NE NEAMS program. This fiscal year, capabilities for reactivity and sensitivity evaluation using perturbation methods were implemented and verified. The First Order Perturbation Method (FOPT) was employed to compute reactivity worth resulting from small perturbations in input parameters, while the Generalized Perturbation Theory (GPT) was used to evaluate sensitivities of a range of response types, including reaction rate ratio, k-eigenvalue, neutron generation time, and effective delayed neutron fraction. These perturbation methods enable users to quantify how response quantities change due to a perturbation in a input parameter without explicitly performing an additional transport simulation for each perturbed state. In particular, the GPT formulation accounts for indirect effects arising from flux changes by solving generalized inhomogeneous equations, for which a Neumann series-based iterative solution method was developed and implemented in Griffin. The implemented reactivity and sensitivity evaluation capabilities were verified using two test problems: an infinite homogeneous system and a two-dimensional hexagonal core. The results showed excellent agreement with reference solutions obtained by a direct method based on finite difference approximation as well as GPT-based results from the PERSENT code, confirming the accuracy of both reactivity and sensitivity evaluations. Additionally, preliminary uncertainty quantification (UQ) results were obtained by combining the sensitivity values computed using GPT and external covariance data, demonstrating that the implemented sensitivity results can be reliably used for uncertainty calculations. To further demonstrate the generality and practical strength of the implementation, the sensitivity evaluation capability was successfully applied to the Empire microreactor with a geometrically complex design that poses significant modeling challenges. The results confirm that Griffin enables sensitivity evaluations even for irregular and highly heterogeneous reactor configurations, thereby establishing a foundation for UQ applications in advanced reactor designs and analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

A Glimpse into Photodetachment Spectra of Giant and Nested Fullerene Anions

We focus on the study of the photodetachment of bare, i.e., single-cage (CN)− as well as nested (multi-cage) (CN@CM@…)− singly charged fullerene anions. We calculate the attached electron’s wavefunctions, energies, oscillator strengths and photodetachment cross sections of the C60−, C240−, C540−, (C60@C240)−, (C60@C540)−, (C240@C540)− and (C60@C240@C540)− fullerene anions, where the attached electron is captured into the ground s-state by the resultant external field provided by all fullerene cages in the anion. The goal is to gain insight into the changes in behavior ofphotodetachment of this valence electron as a function of the different geometries and potentials of the various underlying fullerenes or nested fullerenes (fullerene onions) both due to their increasing size and due to “stuffing” of a larger bare fullerene with smaller fullerenes. To meet this goal, we opt for a simple semi-empirical approximation to this problem: we approximate each individual fullerene cage by a rigid potential sphere of a certain inner radius, thickness and potential depth, as in numerous other model studies performed to date. The results reveal a number of rather significant differences in the wavefunctions, oscillator strengths and photodetachment cross sections among these fullerene anions, some of which are completely counter-intuitive. The results obtained can serve as a “zeroth-order-touchstone” for future studies of single-cage and nested fullerene anions by more rigorous theories and/or experiments to build upon this work to assess the importance of interactions omitted in the present study.

Dolmatov, Valeriy K.↗