Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

SiO 2 Is Wasted Space in Single-Nanometer-Scale Silicon Nanoparticle-Based Composite Anodes for Li-Ion Electrochemical Energy Storage

The electrode processing conditions of silicon-based composite anodes play a pivotal role in the resulting interfacial chemical speciation and, thus, the electrochemical cycling behavior of the electrode. Systematically investigating how small chemical changes to the surface of the silicon nanoparticle (NP) affect larger, electrode-level properties is a strategy that will inform design principles to maximize electrode energy density and extend electrode lifetime. Here, we incorporate silicon nanoparticles (NPs) with an average diameter of 5.5 nm synthesized from the gas phase through a nonthermal plasma method into composite anode half-cell coin cells. We perform chemistry to functionalize the native hydride-terminated silicon NP surface with N-methylpyrrolidone (NMP) to improve slurry properties and reduce the silicon reactivity prior to composite electrode fabrication. We construct composite electrodes from these silicon NPs and observe an 86% capacity retention over 100 cycles at a rate of C/5, with an initial silicon specific capacity of 2600 mAh/g. We expose the same Si NPs to water that completely oxidizes these small-diameter NPs to SiO 2 and find that the SiO 2 NPs in the same electrode configuration exhibit no obvious lithium alloying capacity in the electrochemical potential range of lithium silicide alloy formation. As this result stands in contrast to existing literature, we provide a discussion on the origin of the discrepancies.

25 ENERGY STORAGE↗

Surface and Bulk Stabilization of Silicon Anodes with Mixed-Multivalent Additives: Ca(TFSI) 2 and Mg(TFSI) 2

Here, silicon is drawing attention as the upcoming anode material for the next generation of lithium-ion batteries due to its higher capacity compared to commercial graphite. However, silicon anions formed during lithiation are highly reactive with binder and electrolyte components creating an unstable SEI layer and limiting the calendar life of silicon anodes. The reactivity of lithium silicide and the formation of an unstable SEI layer is mitigated by utilizing the use of a mixture of Ca and Mg multivalent cations as an electrolyte additive for Si anodes to improve their calendar life. The effect of mixed salts on the bulk and surface of silicon anodes was studied by multiple structural characterization techniques. Ca and Mg ions in the electrolyte formed relatively thermodynamically stable quaternary Li-Ca-Mg-Si Zintl phases in an in-situ fashion and more stable and denser SEI layer on the Si particles. These in turn protect silicon particles against side reactions with electrolytes in a coin cell. The full cell with the mixed cation electrolyte demonstrates enhanced calendar life performance with lower measured current and current leakage than that of the baseline electrolyte due to reduced side reactions. Electron Microscopy, HRXRD, and solid-state NMR results showed that electrodes with mixed cations tended to have less cracking on the electrode surface compared to Si electrodes with Gen2 + FEC and the presence of mixed cations enhances cation migration and formation of quaternary Zintl phases stabilizing bulk and forming a more stable SEI.

25 ENERGY STORAGE↗

Synthesis of nanostructures in nanowires using sequential catalyst reactions

Nanowire growth by the vapour–liquid–solid (VLS) process enables a high level of control over nanowire composition, diameter, growth direction, branching and kinking, periodic twinning, and crystal structure. The tremendous impact of VLS-grown nanowires is due to this structural versatility, generating applications ranging from solid-state lighting and single-photon sources to thermoelectric devices. Here, we show that the morphology of these nanostructures can be further tailored by using the liquid droplets that catalyse nanowire growth as a ‘mixing bowl’, in which growth materials are sequentially supplied to nucleate new phases. Growing within the liquid, these phases adopt the shape of faceted nanocrystals that are then incorporated into the nanowires by further growth. Furthermore, we demonstrate this concept by epitaxially incorporating metal-silicide nanocrystals into Si nanowires with defect-free interfaces, and discuss how this process can be generalized to create complex nanowire-based heterostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Understanding the interface interaction between U3Si2 fuel and SiC cladding

Abstract Triuranium disilicide (U 3 Si 2 ) fuel with silicon carbide (SiC) composite cladding is being considered as an advanced concept/accident tolerant fuel for light water reactors thus, understanding their chemical compatibility under operational and accident conditions is paramount. Here we provide a comprehensive view of the interaction between U 3 Si 2 and SiC by utilizing density functional theory calculations supported by diffusion couple experiments. From the calculated reaction energies, we demonstrate that triuranium pentasilicide (U 3 Si 5 ), uranium carbide (UC), U 20 Si 16 C 3 , and uranium silicide (USi) phases can form at the interface. A detailed study of U 3 Si 2 and SiC defect formation energies of the equilibrated materials yielding the interfacial phases U 20 Si 16 C 3 , U 3 Si 5 and UC reveal a thermodynamic driving force for generating defects in both fuel and cladding. The absence of either the U 3 Si 2 or SiC phase, however, causes the defect formation energies in the other phase to be positive, removing the driving force for additional interfacial reactions. The diffusion couple experiments confirm the conclusion with demonstrated restricted formation of U 3 Si 5 , UC, and U 20 Si 16 C 3 /USi phases at the interface. The resulting lack of continuous interaction between the U 3 Si 2 and SiC, reflects the diminishing driving force for defect formation, demonstrating the substantial stability of this fuel-cladding system.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic substrate reactions during room temperature heavy ion irradiation of CoCrCuFeNi high entropy alloy thin films

Abstract High entropy alloys (HEAs) are promising materials for various applications including nuclear reactor environments. Thus, understanding their behavior under irradiation and exposure to different environments is important. Here, two sets of near-equiatomic CoCrCuFeNi thin films grown on either SiO 2 /Si or Si substrates were irradiated at room temperature with 11.5 MeV Au ions, providing similar behavior to exposure to inert versus corrosion environments. The film grown on SiO 2 had relatively minimal change up to peak damage levels above 500 dpa, while the film grown on Si began intermixing at the substrate–film interface at peak doses of 0.1 dpa before transforming into a multi-silicide film at higher doses, all at room temperature with minimal thermal diffusion. The primary mechanism is radiation-enhanced diffusion via the inverse Kirkendall and solute drag effects. The results highlight how composition and environmental exposure affect the stability of HEAs under radiation and give insights into controlling these behaviors.

36 MATERIALS SCIENCE↗

Weyl, Dirac and high-fold chiral fermions in topological quantum matter

Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in the context of particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin–orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk–boundary correspondence, giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss several exotic optical and magnetic responses observed in these materials, as well as progress in developing related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. Finally, we hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Novel Dual-Step Nucleation Pathway in Crystalline Solids under Neutron Irradiation

Innovations in nanostructuring of inorganic crystalline solids are often limited by prerequisite critical nucleation energy and solute supersaturation for formation of a phase. This research provides direct evidence supporting the viability of an unconventional irradiation-induced nanostructuring process, via transmission electron microscopy, that circumvents these preconditions. Using polymorphic silicon carbide (SiC) as a prototype, a surprising two-step nucleation route is demonstrated through which nanoscale distribution of the second phase is achieved by reaction of solutes with neutron irradiation-induced precursors. In the first step, nanoscale α–SiC precipitates in a β–SiC matrix unexpectedly nucleate heterogeneously at structural defects. This occurs at significantly lower temperatures compared with the usual β→α transition temperature. Subsequently, α–SiC precipitate acts as a surrogate template for its structural and compositional transition into a fission product precipitate, palladium silicide. These discoveries provide a modern view of irradiation engineering in polymorphic ceramics for advanced applications.

36 MATERIALS SCIENCE↗

Experimental formation enthalpies for intermetallic phases and other inorganic compounds

The standard enthalpy of formation of a compound is the energy associated with the reaction to form the compound from its component elements. The standard enthalpy of formation is a fundamental thermodynamic property that determines its phase stability, which can be coupled with other thermodynamic data to calculate phase diagrams. Calorimetry provides the only direct method by which the standard enthalpy of formation is experimentally measured. However, the measurement is often a time and energy intensive process. We present a dataset of enthalpies of formation measured by high-temperature calorimetry. The phases measured in this dataset include intermetallic compounds with transition metal and rare-earth elements, metal borides, metal carbides, and metallic silicides. These measurements were collected from over 50 years of calorimetric experiments. The dataset contains 1,276 entries on experimental enthalpy of formation values and structural information. Most of the entries are for binary compounds but ternary and quaternary compounds are being added as they become available. In conclusion, the dataset also contains predictions of enthalpy of formation from first-principles calculations for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A computational survey of semiconductors for power electronics

Power electronics (PE) are used to control and convert electrical energy in a wide range of applications from consumer products to large-scale industrial equipment. While Si-based power devices account for the vast majority of the market, wide band gap semiconductors such as SiC, GaN, and Ga 2 O 3 are starting to gain ground. However, these emerging materials face challenges due to either non-negligible defect densities, high synthesis and processing costs, or poor thermal properties. Here, we report on a broad computational survey aimed to identify promising materials for future power electronic devices beyond SiC, GaN, and Ga 2 O 3 . We consider 863 oxides, sulfides, nitrides, carbides, silicides, and borides that exhibit finite calculated band gaps. We utilize ab initio methods in conjunction with models for intrinsic carrier mobility, and critical breakdown field to compute the widely used Baliga figure of merit. We also compute the lattice thermal conductivity and use it as an additional screening parameter. In addition to correctly identifying known PE materials, our survey has revealed a number of promising candidates exhibiting the desirable combination of high figure of merit and high lattice thermal conductivity, which we propose for further experimental investigations.

36 MATERIALS SCIENCE↗

High-quality epitaxial CoFe/Si(111) heterostructures fabricated by low-temperature molecular beam epitaxy

We demonstrate atomically controlled heterojunctions consisting of ferromagnetic CoFe alloys and silicon (Si) using low-temperature molecular beam epitaxy with a good atomic matching at the (111) plane. The saturation magnetization of the CoFe layers grown reaches {approx}85% of the value of bulk samples reported so far, and can be systematically controlled by tuning the ratio of Co to Fe, indicating that the silicidation reactions between CoFe and Si are suppressed and the heterojunctions are very high quality. We find that the Schottky barrier height of the high-quality CoFe/Si(111) junctions is unexpectedly low compared to the previous data for other metal/Si ones, implying the reduction in the Fermi-level-pinning effect. We can expand the available high-quality ferromagnet/Si heterostructures in the field of Si-based spintronics.

36 MATERIALS SCIENCE↗

Real-time synchrotoron radiation X-ray diffraction and abnormal temperature dependence of photoluminescence from erbium silicates on SiO{sub 2}/Si substrates

The erbium silicate formation processes during annealing in Ar gas were monitored by synchrotron radiation grazing incidence X-ray diffraction (GIXD) in real time and the optical properties of the silicates were investigated by photoluminescence measurements in spectral and time-resolved domains. The GIXD measurements show that erbium silicates and erbium oxide are formed by interface reactions between silicon oxide and erbium oxides deposited on silicon oxide by reactive sputtering in Ar gas and O{sub 2}/Ar mixture gas ambiences. The erbium silicates are formed above 1060 degree sign C in Ar gas ambience and above 1010 degree sign C in O{sub 2}/Ar gas ambience, and erbium silicides are dominantly formed above 1250 degree sign C. The I{sub 15/2}-I{sub 13/2} Er{sup 3+} photoluminescence from the erbium oxide and erbium silicate exhibits abnormal temperature dependence, which can be explained by the phonon-assisted resonant absorption of the 532-nm excitation photons into the {sup 2}H{sub 11/2} levels of Er{sup 3+} ions of the erbium compounds.

36 MATERIALS SCIENCE↗

High-resolution and site-specific scanning spreading resistance microscopy and its applications to silicon devices

Due to the continuous reduction of the critical dimensions of semiconductor devices, it becomes very important to know the two dimensional (2D) doping profile for improving device performance. Scanning spreading resistance microscopy (SSRM) performed in high vacuum is a powerful technique for quantitative 2D-doping profiling, with high spatial resolution and wide dynamic range of carrier concentration, as well as capability of site-specific analysis for accurate position. In this paper, we review SSRM applications to source/drain engineering in Si devices and their correlation with device characteristics by demonstrating several case studies. Direct observation of (110)/(100) CMOSFETs clarified significant differences between both pFETs and nFETs on (110) and (100) silicon substrates, revealing 2D channeling effect of boron ion implantation in pFETs; as well as silicidation impact on junction leakage-current characteristics in nFETs. Furthermore, our sample-preparation breakthrough enables site-specific SSRM characterization within 60 nm ultra thin samples and therefore failure analysis of real SRAM devices, demonstrating the high potential of SSRM technology for further device scaling and for failure analysis.

36 MATERIALS SCIENCE↗

Ultrathin magnetic oxide EuO films on Si(001) using SiO{sub x} passivation-Controlled by hard x-ray photoemission spectroscopy

We present the chemical and structural optimization of ultrathin magnetic oxide EuO films on silicon. By applying a controlled in situ passivation of the Si(001) surface with SiO{sub x} in the monolayer regime, metallic silicide contaminations at the interface can be effectively reduced down to a sub-monolayer coverage, as was carefully quantified by interface-sensitive hard x-ray photoemission spectroscopy. Heteroepitaxial growth of EuO on Si(001) is sustained for this ultrathin SiO{sub x}-passivation, and bulk-near magnetic properties are observed for the 4 nm-thin EuO films. Our successful combination of chemically and structurally optimized EuO/Si(001) heterostructures by ultrathin in situ SiO{sub x} passivation makes this system promising for an application as alternative spin functional tunnel contacts in spin-FETs.

36 MATERIALS SCIENCE↗

Convective cooling in a pool-type research reactor

A reactor produces heat arising from fission reactions in the nuclear core. In the Missouri University of Science and Technology research reactor (MSTR), this heat is removed by natural convection where the coolant/moderator is demineralised water. Heat energy is transferred from the core into the coolant, and the heated water eventually evaporates from the open pool surface. A secondary cooling system was installed to actively remove excess heat arising from prolonged reactor operations. The nuclear core consists of uranium silicide aluminium dispersion fuel (U{sub 3}Si{sub 2}Al) in the form of rectangular plates. Gaps between the plates allow coolant to pass through and carry away heat. A study was carried out to map out heat flow as well as to predict the system’s performance via STAR-CCM+ simulation. The core was approximated as porous media with porosity of 0.7027. The reactor is rated 200kW and total heat density is approximately 1.07+E7 Wm{sup −3}. An MSTR model consisting of 20% of MSTR’s nuclear core in a third of the reactor pool was developed. At 35% pump capacity, the simulation results for the MSTR model showed that water is drawn out of the pool at a rate 1.28 kg s{sup −1} from the 4” pipe, and predicted pool surface temperature not exceeding 30°C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchrotron-based investigation of transition-metal getterability in n-type multicrystalline silicon

Solar cells based on n-type multicrystalline silicon (mc-Si) wafers are a promising path to reduce the cost per kWh of photovoltaics; however, the full potential of the material and how to optimally process it are still unknown. Process optimization requires knowledge of the response of the metal-silicide precipitate distribution to processing, which has yet to be directly measured and quantified. To supply this missing piece, we use synchrotron-based micro-X-ray fluorescence (μ-XRF) to quantitatively map >250 metal-rich particles in n-type mc-Si wafers before and after phosphorus diffusion gettering (PDG). We find that 820°C PDG is sufficient to remove precipitates of fast-diffusing impurities and that 920°C PDG can eliminate precipitated Fe to below the detection limit of μ-XRF. Thus, the evolution of precipitated metal impurities during PDG is observed to be similar for n- and p-type mc-Si, an observation consistent with calculations of the driving forces for precipitate dissolution and segregation gettering. Measurements show that minority-carrier lifetime increases with increasing precipitate dissolution from 820°C to 880°C PDG, and that the lifetime after PDG at 920°C is between the lifetimes achieved after 820°C and 880°C PDG.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hard x-ray photoelectron spectroscopy equipment developed at beamline BL46XU of SPring-8 for industrial researches

Hard X-ray photoelectron spectroscopy (HAXPES) is a powerful tool for investigating the chemical and electronic states of bulk and buried interface in a non-destructive manner due to the large probing depth of this technique. At BL46XU of SPring-8, there are two HAXPES systems equipped with different electron spectrometers, which can be utilized appropriately according to the purpose in various industrial researches. In this article, these systems are outlined, and two typical examples of HAXPES studies performed by them are presented, which focus on the silicidation at Ni/SiC interface and the energy distribution of interface states at SiO{sub 2}/a-InGaZnO.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and optimization of nanoparticle-pigmented solar selective absorber coatings for high-temperature concentrating solar thermal systems

In this paper, we present a systematic approach for the design and optimization of nanoparticle-pigmented solar selective absorbers for operation at 750 °C. Using the scattering and absorption cross-sections calculated by Lorenz-Mie scattering theory as input, we employ a four-flux radiative transfer method to investigate the solar selectivity mechanism and optimize the optical-to-thermal conversion efficiency (η therm ) as a function of the metallic nanoparticle material, the nanoparticle diameter, the volume fraction, and the coating thickness. Among the nanoparticle material candidates in this study, C54-TiSi 2 is the best option with an optimized η therm = 87.0% for a solar concentration ratio of C = 100 and η therm = 94.4% for C = 1000 at 750 °C. NiSi is also a promising candidate comparable to TiSi 2 in thermal efficiency, Experimentally, an un-optimized 200 nm-diameter TiSi 2 nanoparticle-silicone solar selective coating has already achieved η therm = 89.8% for C = 1000 at 750 °C. This performance is consistent with the theoretical model and close to the thermal efficiency of the commercial Pyromark 2500 coatings (90.1%). We also demonstrate that Ni/NiSi core-shell structures embedded in the SiO 1.5 matrix is thermally stable at 750 °C for 1000 h in air. Lastly, these results indicate that silicide cermet coatings are promising to achieve high optical performance and high temperature thermal stability simultaneously.

14 SOLAR ENERGY↗

Stability of magnetocaloric La(Fe x Co y Si 1-x-y ) 13 in water and air

Stability of cobalt-doped lanthanum iron silicide, La(Fe x Co y Si 1-x-y ) have been investigated under conditions required for magnetocaloric refrigeration. The XRD analysis revealed that both milled and non-milled samples stored in water loose a few Bragg peaks corresponding to the NaZn13 phase of La(Fe x Co y Si 1-x-y ) . Samples stored in air show well-defined Bragg peaks similar to that of pristine material. The SEM-EDS of the milled and non-milled samples stored in water and air show an increased concentration of oxygen in the samples, particularly those treated with water. The course non-milled powders kept in air and water show sharp transitions at the Curie temperature T C = 300K without large magnetization above the T C . The milled, fine-particulate sample stored in air shows a slightly broadened transition at T C , and that stored in deionized water for 14 days shows significantly broadened transition from 300K and retains large magnetizations above 400 K. This is indicative of relatively fast hydrolysis and removal of some or all of La, likely as hydroxide, from fine powders, leaving behind La-poor or, potentially, La-free Fe-Co-Si containing ferromagnetic residue with much higher Curie temperature. The non-milled course sample stored in water exhibits sharper magnetic transition and higher magnetization hence it shows the highest entropy change among all 4 type of samples.

36 MATERIALS SCIENCE↗