Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Spatial resolution in secondary-electron microscopy

Here, we first review the significance of resolution and contrast in electron microscopy, and the effect of the electron optics on these two quantities. We then outline the physics of the generation of secondary electrons (SE) and their transport and emission from the surface of a specimen. Contrast and resolution are discussed for different kinds of SE imaging in scanning (SEM) and scanning-transmission (STEM) instruments, with some emphasis on the observation of individual atoms and atomic columns in a thin specimen. The possibility of achieving atomic resolution from a bulk specimen at SEM energies is also considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perch Area Petrel Project

The SEM in this Petrel project is based, in part, on an earlier model prepared at Battelle (1) that covers Michigan's Northern Pinnacle Reef trend. While the existing SEM focused on the Niagaran section, this Petrel project expands the framework to included overlying and underlying geologic zones. Where available, geomechanical logs were incorporated into the model.

carbonates↗

Synthesis of Lanthanide-Based Intermetallic Silicides

Lanthanide-containing materials are of interest because of their useful magnetic and electronic behavior. To study this intrinsic behavior, researchers need high-quality single crystals to avoid interference from grain boundaries or defects commonly found in polycrystalline samples. One method for growing single crystals is metal-flux synthesis, an approach that promotes crystal growth at lower reaction temperatures thus providing access to complex intermetallic phases. My project focuses on synthesizing novel lanthanide-containing intermetallic silicides related to previously reported f-element compounds with the Gd1??Fe4Si10?? structure type. I investigated reactions targeting lanthanum, praseodymium, neodymium, samarium, europium, and gadolinium-containing products, and used scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) to identify promising lanthanide-containing phases. I prepared reactions by loading lanthanide oxides, Co, Si, Al, and Ga into alumina crucibles in a 0.2:1:1:10:10 Ln2O3/Co/Si/Al/Ga mmol ratio, where Ln = La, Nd, Pr, Sm, Eu, or Gd. The reactions were sealed in quartz tubes, heated in a furnace, and centrifuged to separate crystals from excess flux. Afterwards, I mechanically isolated single crystals and prepared them for characterization. Pr-, Nd-, and Sm-containing reactions were confirmed through SEM-EDS to have formed the targeted quaternary phase. Single crystal X-ray diffraction (SC-XRD) data showed the Nd-containing crystals exhibited a hexagonal unit cell associated with the Gd1??Fe4Si10?? structure type. La- and Eu-containing reactions instead formed competing Co(Al/Ga/Si)3 phase crystals. Single-crystal XRD, powder XRD, and magnetic susceptibility and heat-capacity measurements will be collected for the remaining lanthanide-containing crystals. This data will help determine the complete crystal structure of the lanthanide analogues, their phase purity and whether they exhibit localized magnetic behavior, magnetic ordering, or other electronic signatures that can be compared with the previously reported actinide analogues. The disordered structure of this intermetallic family is associated with unusual magnetic and electronic behavior meaning lanthanide analogues may show potential as thermoelectric materials. Developing new thermoelectric candidate materials is relevant to energy efficiency and waste-heat recovery, which supports DOE’s broader goal of advancing science and technology solutions for America’s energy needs.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Chapter 14: Electron Microscopy on Thin Films for Solar Cells

This chapter overviews the various techniques applied in scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and highlights their possibilities and also limitations. It gives the various imaging and analysis techniques applied on a scanning electron microscope. The chapter shows that imaging is divided into that making use of secondary electrons (SEs) and of backscattered electrons (BSEs), resulting in different contrasts in the images and thus providing information on compositions, microstructures, and surface potentials. Whenever aiming for imaging and analyses at scales of down to the angstroms range, TEM and its related techniques are appropriate tools. In many cases, also SEM techniques provide the access to various material properties of the individual layers, not requiring specimen preparation as time consuming as TEM techniques. Finally, the chapter dedicates to cross-sectional specimen preparation for electron microscopy. The preparation decides indeed on the quality of imaging and analyses.

14 SOLAR ENERGY↗

Irradiation Enhances Strength and Deformability of Nano‐Architected Metallic Glass

The quest for radiation‐damage tolerant materials has found good candidates in nanoporous metals, whose abundance of free surfaces provides ample sinks for radiation‐induced defects, as well as in metallic glasses, whose characteristic failure via shear banding can be alleviated by irradiation. This type of catastrophic failure in metallic glass can also be suppressed by reducing their dimensions to the nanoscale. To combine the beneficial effects of resilience against irradiation in materials containing many free surfaces and nano‐sized metallic glasses, the authors fabricate Zr–Ni–Al metallic glass nano‐architecture and irradiate them with 12 MeV Ni 4+ ions. These 3D nanolattices are composed of hollow beams of sputtered metallic glass with beam wall thicknesses ≈10–100 nm, with a relative density of ≈5%, which renders them to be 20 times lighter than their bulk‐level counterparts. The authors find that the thickest‐walled nanolattices, those with a median wall thickness of ≈88 nm, are able to withstand irradiation without significant contraction; all other substantially shrunk; and collapsed upon irradiation. In situ nanomechanical experiments on the irradiated samples compressed inside a scanning electron microscope (SEM) reveal substantial improvement in mechanical response upon irradiation, with an average increase in yield strength of 35.7% and a significant enhancement in deformability. Enhanced deformability upon irradiation is apparent from the nanolattices' accommodation of larger strains before any kind of failure, as well as the presence of smaller strain bursts and stress drops throughout the stress–strain response. The irradiated nanolattices are largely intact after compression, with in situ SEM videos demonstrating a layer‐by‐layer like collapse in the irradiated nanolattices in contrast to the catastrophic failure with complete destruction of the failed layers observed in equivalent as‐fabricated samples. This work points to nano‐architected metallic glasses being a promising candidate for creating ultra‐lightweight, radiation tolerant materials, and irradiation as a promising technique for improving the mechanical response of metallic glass nanolattices with stiffness on the order of 250 MPa.

Thompson, Rachel L.↗

Visualizing the Internal Nanocrystallinity of Calcite Due to Nonclassical Crystallization by 3D Coherent X–Ray Diffraction Imaging

The internal crystallinity of calcite is investigated for samples synthesized using two approaches: precipitation from solution and the ammonium carbonate diffusion method. Scanning electron microscopy (SEM) analyses reveal that the calcite products precipitated using both approaches have a well–defined rhombohedron shape, consistent with the euhedral crystal habit of the mineral. The internal structure of these calcite crystals is characterized using Bragg coherent diffraction imaging (BCDI) to determine the 3D electron density and the atomic displacement field. BCDI reconstructions for crystals synthesized using the ammonium carbonate diffusion approach have the expected euhedral shape, with internal strain fields and few internal defects. In contrast, the crystals synthesized by precipitation from solution have very complex external shapes and defective internal structures, presenting null electron density regions and pronounced displacement field distributions. These heterogeneities are interpreted as multiple crystalline domains, created by a nonclassical crystallization mechanism, where smaller nanoparticles coalescence into the final euhedral particles. The combined use of SEM, X–ray diffraction (XRD), and BCDI allows for structurally differentiating calcite crystals grown with different approaches, opening new opportunities to understand how grain boundaries and internal defects alter calcite reactivity.

36 MATERIALS SCIENCE↗

Unveiling the Mechanical and Electrochemical Evolution of Nanosilicon Composite Anodes in Sulfide-Based All-Solid-State Batteries

The utilization of silicon anodes in all-solid-state lithium batteries provides good prospects for facilitating high energy density. However, the compatibility of sulfide solid-state electrolytes (SEs) with Si and carbon is often questioned due to potential decomposition. Here, in this paper, operando X-ray absorption near-edge structure (XANES) spectroscopy, ex situ scanning electron microscopy (SEM), and ex situ X-ray nanotomography (XnT) are utilized to investigate the chemistry and structure evolution of nano-Si composite anodes. Results from XANES demonstrate a partial decomposition of SEs during the first lithiation stage, which is intensified by the presence of carbon. Nevertheless, the performances of first three cycles in Si–SE–C are stable, which proves that the generated media is ionically conductive. XnT and SEM results show that the addition of SEs and carbon improves the structural stability of the anode, with fewer pores and voids. A chemo-elasto-plastic model reveals that SEs and carbon buffer the volume expansion of Si, thus enhancing mechanical stability. The balance between the pros and cons of SEs and carbon in enhancing reaction kinetics and structural stability enables the Si composite anode to demonstrate the highest Si utilization with higher specific capacities and a better rate than pure Si and Si composite anodes with only SEs.

36 MATERIALS SCIENCE↗

Atomic force microscopy and scanning electron microscopy characterization of the controlling of surface morphology of epoxy‐amine‐cured spin‐coated films

Abstract Atomic force microscopy (AFM) was successfully used to study spin‐coated, amine‐cured epoxy film microstructure and morphology. The air‐epoxy and epoxy‐substrate interfaces were examined using tapping‐mode height and phase imaging AFM. The impact of relative humidity on the morphology and microstructure of the surfaces was determined. AFM was able to elucidate the changes on the surface as relative humidity during processing increased. It was observed that large nodular formations formed on the epoxy surface expose to the air but not epoxy surface formed on the substrate in addition to varying regions of more or less compliant structures, which was attributed to carbamate formation caused by the amine curing agent reaction with atmospheric CO 2 . Scanning electron microscopy (SEM) was used to further elucidate interface and interphase morphology of spin‐coated epoxies. Experimentation also demonstrated that post‐curing above the glass transition did not change the morphology structure, suggesting surface structures are “locked‐in.” SEM was used to further elucidate how the interface and interphase change with changing environmental conditions at both the air‐epoxy and epoxy‐substrate interface/interphases, including the impact of atmospheric CO 2 on Marangoni cell formation.

Shenk, Timothy M.↗

Vulnerability of the Superficial Zone of Immature Articular Cartilage to Compressive Injury

The zonal composition and functioning of adult articular cartilage causes depth-dependent responses to compressive injury. In immature cartilage, shear and compressive moduli as well as collagen and sulfated glycosaminoglycan (sGAG) content also vary with depth. However, there is little understanding of the depth-dependent damage caused by injury. Since injury to immature knee joints most often causes articular cartilage lesions, this study was undertaken to characterize the zonal dependence of biomechanical, biochemical, and matrix-associated changes caused by compressive injury. Disks from the superficial and deeper zones of bovine calves were biomechanically characterized. Injury to the disks was achieved by applying a final strain of 50% compression at 100%/second, followed by biomechanical recharacterization. Tissue compaction upon injury as well as sGAG density, sGAG loss, and biosynthesis were measured. Collagen fiber orientation and matrix damage were assessed using histology, diffraction-enhanced x-ray imaging, and texture analysis. Injured superficial zone disks showed surface disruption, tissue compaction by 20.3 {+-} 4.3% (mean {+-} SEM), and immediate biomechanical impairment that was revealed by a mean {+-} SEM decrease in dynamic stiffness to 7.1 {+-} 3.3% of the value before injury and equilibrium moduli that were below the level of detection. Tissue areas that appeared intact on histology showed clear textural alterations. Injured deeper zone disks showed collagen crimping but remained undamaged and biomechanically intact. Superficial zone disks did not lose sGAG immediately after injury, but lost 17.8 {+-} 1.4% of sGAG after 48 hours; deeper zone disks lost only 2.8 {+-} 0.3% of sGAG content. Biomechanical impairment was associated primarily with structural damage. The soft superficial zone of immature cartilage is vulnerable to compressive injury, causing superficial matrix disruption, extensive compaction, and textural alteration, which results in immediate loss of biomechanical function. In conjunction with delayed superficial sGAG loss, these changes may predispose the articular surface to further softening and tissue damage, thus increasing the risk of development of secondary osteoarthritis.

59 BASIC BIOLOGICAL SCIENCES↗

CO 2 Electroreduction with Enhanced Ethylene and Ethanol Selectivity by Nanostructuring Polycrystalline Copper

Abstract There are a number of recent reports on the use of oxidation/reduction cycling of Cu surfaces to improve their selectivity for ethylene formation in the aqueous CO 2 reduction reaction. Here, the oxidation/reduction process is examined in detail. It is found that the faradaic efficiencies for both ethylene and ethanol are enhanced after oxidation/reduction cycling in the presence of halide anions. Specifically, cycling of the electrode in the presence of chloride, bromide, or fluoride anions allows for an ethylene faradaic efficiency of approximately 15.2 %, a factor of 1.5 higher than that for polycrystalline copper (at −1.0 V vs. RHE). The faradaic efficiency for ethanol is also enhanced from 2.65 to approximately 7.6 %. The effects of electrochemical oxidation/reduction with the chloride anion were investigated by using in situ Raman spectroscopy, and the changes in the surface morphology of copper were monitored by using SEM. Consistent with prior reports, it is observed that during the oxidation part of the cycle, anodic corrosion forms a Cu 2 O layer, which consists of cubical crystals of about 150 nm. During the reduction sweep, it is converted to metallic copper, which forms irregular Cu nanoparticles of around 20 nm in diameter. The enhancement in ethylene formation is presumably attributed to the formation of grain boundaries, which may serve as active sites.

Kwon, Youngkook↗

Electrochemically Controlled Ion‐exchange Property of Carbon Nanotubes/Polypyrrole Nanocomposite in Various Electrolyte Solutions

Abstract The electrochemically controlled ion‐exchange properties of multi‐wall carbon nanotube (MWNT)/electronically conductive polypyrrole (PPy) polymer composite in the various electrolyte solutions have been investigated. The ion‐exchange behavior, rate and capacity of the electrochemically deposited polypyrrole with and without carbon nanotube (CNT) were compared and characterized using cyclic voltammetry (CV), chronoamperometry (CA), electrochemical quartz crystal microbalance (EQCM), X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). It has been found that the presence of carbon nanotube backbone resulted in improvement in ion‐exchange rate, stability of polypyrrole, and higher anion loading capacity per PPy due to higher surface area, electronic conductivity, porous structure of thin film, and thinner film thickness providing shorter diffusion path. Chronoamperometric studies show that electrically switched anion exchange could be completed more than 10 times faster than pure PPy thin film. The anion selectivity of CNT/PPy film is demonstrated using X‐ray photoelectron spectroscopy (XPS).

Choi, Daiwon↗

Pectin biopolymer mechanics and microstructure associated with polysaccharide phase transitions

Polysaccharide polymers like pectin can demonstrate striking and reversible changes in their physical properties depending upon relatively small changes in water content. Recent interest in using pectin polysaccharides as mesothelial sealants suggests that water content, rather than nonphysiologic changes in temperature, may be a practical approach to optimize the physical properties of the pectin biopolymers. In this work, we used humidified environments to manipulate the water content of dispersed solution of pectins with a high degree of methyl esterification (high-methoxyl pectin; HMP). The gel phase transition was identified by a nonlinear increase in compression resistance at a water content of 50% (w/w). The gel phase was associated with a punched-out fracture pattern and scanning electron microscopy (SEM) images that revealed a cribiform (Swiss cheese-like) pectin microstructure. The glass phase transition was identified by a marked increase in resilience and stiffness. The glass phase was associated with a star-burst fracture pattern and SEM images that demonstrated a homogeneous pectin microstructure. In contrast, the burst strength of the pectin films was largely independent of water content over a range from 5 to 30% (w/w). These observations indicate the potential to use water content in the selective regulation of the physical properties of HMP biopolymers.

59 BASIC BIOLOGICAL SCIENCES↗

Enamel ribbons, surface nodules, and octacalcium phosphate in C57BL/6 Amelx -/- mice and Amelx +/- lyonization

Amelogenin is required for normal enamel formation and is the most abundant protein in developing enamel. Methods. Amelx +/+ , Amelx +/- and Amelx -/- molars and incisors from C57BL/6 mice were characterized using RT-PCR, Western blotting, dissecting and light microscopy, immunohistochemistry (IHC), transmission electron microscopy (TEM), scanning electron microscopy (SEM), backscattered SEM (bSEM), nanohardness testing, and X-ray diffraction. No amelogenin protein was detected by Western blot analyses of enamel extracts from Amelx -/- mice. Amelx -/- incisor enamel averaged 20.3±3.3 μm in thickness, or only 1/6th that of the wild-type (122.3±7.9 μm). Amelx -/- incisor enamel nanohardness was 1.6 Gpa, less than half that of wild-type enamel (3.6 Gpa). Amelx +/- incisors and molars showed vertical banding patterns unique to each tooth. IHC detected no amelogenin in Amelx -/- enamel and varied levels of amelogenin in Amelx +/- incisors, which correlated positively with enamel thickness, strongly supporting lyonization as the cause of the variations in enamel thickness. TEM analyses showed characteristic mineral ribbons in Amelx +/+ and Amelx -/- enamel extending from mineralized dentin collagen to the ameloblast. The Amelx -/- enamel ribbons were not well-separated by matrix and appeared to fuse together, forming plates. Furthermore, x-ray diffraction determined that the predominant mineral in Amelx -/- enamel is octacalcium phosphate (not calcium hydroxyapatite). Amelx -/- ameloblasts were similar to wild-type ameloblasts except no Tomes’ processes extended into the thin enamel. Amelx -/- and Amelx +/- molars both showed calcified nodules on their occlusal surfaces. Histology of D5 and D11 developing molars showed nodules forming during the maturation stage. Amelogenin forms a resorbable matrix that separates and supports, but does not shape early secretory stage enamel ribbons. Amelogenin may facilitate the conversion of enamel ribbons into hydroxyapatite by inhibiting the formation of octacalcium phosphate. Finally, amelogenin is necessary for thickening the enamel layer, which helps maintain ribbon organization and development and maintenance of the Tomes process.

59 BASIC BIOLOGICAL SCIENCES↗

Fabrication of diatomite‐based microencapsulated flame retardant and its improved fire safety of unsaturated polyester resin

To achive excellent fire resistance, new microcapsule flame retardants (DMCAD and DMPPD) were prepared using 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide combined with melamine cyanurate or melamine polyphosphate as the shell material and diatomite as the core material. The successful assembly of DMCAD and DMPPD was detailed characterized by Fourier transform infrared (FT‐IR) spectra, X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Meanwhile, the flame retardancy and thermal stability of the unsaturated polyester resin (UPR)/DMCAD and UPR/DMPPD composites were also studied. The addition of DMCAD and DMPPD effectively improves the flame retardance properties of UPR, and the effect of DMPPD was better. The limiting oxygen index (LOI) of UPR/DMPPD‐3 increased by 11.6% when compared with that of UPR, and the sample achieved V‐0 rating. Moreover, the peak heat release rate (pHRR) and the total heat release (THR) rate of UPR/DMPPD‐3 were reduced by 67% and 26%, respectively. Under nitrogen condition and air condition, UPR/DMPPD showed better thermal stability and char‐forming ability from the thermogravimetric (TG) results. Residual char of the UPR composites was systematically analyzed with SEM and XPS. Finally, the flame retardant mechanism of DMPPD was proposed.

Chen, Gang↗

Fluorine-Containing ABC Linear Triblock Terpolymers: Synthesis and Self-assembly in Solution

In this paper a fluorine-containing monomer, 2-fluroroethyl methacrylate (2FEMA) was used to synthesize the linear triblock terpolymer poly(n-butyl methacrylate)-poly(methyl methacrylate)-poly(2-fluoroethyl methacrylate) (PnBMA-PMMA-P2FEMA). A kinetic study of the homopolymerization of 2FEMA by reversible addition-fragmentation chain transfer (RAFT) polymerization showed that it demonstrates living character and produces well defined polymers with reasonably narrow polydispersities (~1.30). Triblock terpolymers were prepared sequentially using a purified Macro-CTA at 70 oC, resulting in final terpolymers with high Dp for each block (>150) and with polydispersities between 1.6 and 2.1. The structure and molecular weights of the resultant PnBMA-PMMA-P2FEMA triblock terpolymers were characterized via 1H NMR, 19F NMR, and gel permeation chromatography (GPC). Self-assembly of these polymers was carried out in a selective solvent and the micellar aggregates (MAs) thereby formed were analyzed using scanning electron microscopy (SEM) and dynamic light scattering (DLS). It was confirmed from SEM that these copolymers could directly self-organize into large compound micelles in tetrahydrofuran/methanol with different diameters, depending on polymer composition.

36 MATERIALS SCIENCE↗

Influence of Protection Layers on Thermal Stability of Nitride Thin Films

Nitrides are commonly studied for their properties relevant to numerous coating applications, and have been recently used to synthesize newly predicted materials in thin film form. However, thermodynamic stability of such nitride materials is difficult to experimentally evaluate, due to limited thermal budget of thin films. Here we show that thermal stability of nitride films can be extended using protection layers. Specifically, we find that zirconium nitride (ZrN) thin films are stable up to at least 1200°C annealing temperature in N2 atmosphere, if aluminum nitride (AlN) diffusion barriers and capping layers are used. X-ray diffraction (XRD) measurements show the expected thermodynamically stable rocksalt structure of ZrN, and scanning electron microscopy (SEM) confirms compact microstructure of these ZrN films. Without such protection layers, transient bixbyite Zr2ON2 phase and high-temperature ZrSi2 phase are observed after annealing by XRD, SEM, and auger electron spectroscopy (AES), due to side reaction with native surface oxide (ZrOx) and substrate (Si) respectively. These results demonstrate that protection layers are beneficial to increase the thermal budget of nitride thin films, for evaluating thermodynamic stability of new nitride materials, for capturing transient metastable phases during crystallization, and for using functional nitride coatings in extreme environments.

36 MATERIALS SCIENCE↗

Pinhole‐Free Ultrathin Silicon Oxide Layer by Ozone‐Dissolved Deionized Water

The pinhole‐free silicon oxide (SiO x ) layer grown using dissolved ozone in deionized water (DI‐O 3 ) is demonstrated. An ultrathin SiO x layer of thickness 1.53 nm ± 1.5% is grown on silicon wafer using 7 ppm DI‐O 3 . A four‐step methodology, including 25 wt% aq. tetramethylammonium hydroxide (TMAH) solution at 80 °C, is employed to magnify the pinhole signatures in the underlying silicon and visualized with dark‐field optical microscopy (DFOM) and scanning electron microscopy (SEM). The DFOM images show spots on the surface of wafer that originate from airborne particles, contamination, etc. SEM images reveal the absence of etch pits in silicon even after etching of SiO x /silicon in TMAH for 300 s. The minority carrier lifetime and interface states density in AlO x ‐capped SiO x /Si structure are ≥2 ms at carrier density of 1 × 10 15 cm −3 and less than 2 × 10 11 cm −2 eV −1 , respectively.

42 ENGINEERING↗