Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEEDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Experimental Study Of Polyformaldehyde Propellants Seeded With Micron-Scale Aluminum Powder For Laser Propulsion

The propulsion performance of polyoxymethylene (POM) seeded with micron-scale aluminum (muAl) powder has been studied experimentally with CO{sub 2} lasers. The results show that the momentum coupling coefficient (C{sub m}) and specific impulse (I{sub sp}) of POM seeded with muAl powder is almost the same as pure POM at lower power density (<1centre dot7x10{sup 6} W/cm{sup 2}). At higher power density (>1centre dot7xl0{sup 6} W/cm{sup 2}), C{sub m} of POM seeded with muAl powder decreases significantly while I{sub sp} increases significantly. When this material is put into a cylindrical nozzle, the measured maximum C{sub m} and I{sub sp} can raise to 40.1 dyne/W and 1361 s, respectively. The energy usage ratio is over 100%, which indicates that the aluminum powder may react chemically with the air under the constraint condition. This conclusion was verified experimentally both in atmosphere and vacuum conditions.

42 ENGINEERING↗

Deuterium retention in tungsten exposed to low-energy pure and helium-seeded deuterium plasmas

Influence of helium (He) on the deuterium (D) retention in tungsten (W) under simultaneous He-D plasma exposure was investigated. Bulk polycrystalline tungsten and two W coatings on carbon substrate, namely, plasma-sprayed tungsten and combined magnetron-sputtered and ion implanted tungsten (CMSII-W) were exposed to pure and He-seeded D plasmas generated by electron-cyclotron-resonance plasma source. The D retention in each sample was subsequently analyzed by various methods such as nuclear reaction analysis for the D depth profiling up to 6 {mu}m and thermal desorption spectroscopy for the determination of total amount of D retention. It is shown that seeding of helium into D plasma with helium ion flux fraction of 10% reduces the deuterium retention for all tungsten grades but more significant reduction was observed for polycrystalline W and less significant effect was found for W coatings. From the thermal desorption spectroscopy measurements, we conclude that the presence of He modifies the density of existing traps for D but does not modify the nature of traps. Maximum effect of a reduction in the deuterium retention due to helium seeding was observed at around 500 K for bulk polycrystalline W. Mechanisms of deuterium retention and He effect in different W materials are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement of the nucleation of smooth and dense nanocrystalline diamond films by using molybdenum seed layers

A method for the nucleation enhancement of nanocrystalline diamond (NCD) films on silicon substrates at low temperature is discussed. A sputter deposition of a Mo seed layer with thickness 50 nm on Si substrates was applied followed by an ultrasonic seeding step with nanosized detonation diamond powders. Hot-filament chemical vapor deposition (HF-CVD) was used to nucleate and grow NCD films on substrates heated up at 550 deg. C. The nucleation of diamond and the early stages of NCD film formation were investigated at different methane percentages in methane/hydrogen gas mixtures by atomic force microscopy, micro-Raman spectroscopy, scanning electron microscopy, and grazing incidence x-ray analyses in order to gain specific insight in the nucleation process of NCD films. The nucleation kinetics of diamond on the Mo-coated Si substrates was found to be up to ten times higher than on blank Si substrates. The enhancement of the nucleation of diamond on thin Mo interlayers results from two effects, namely, (a) the nanometer rough Mo surface shows an improved embedding of ultrasonically introduced nanosized diamond seeds that act as starting points for the diamond nucleation during HF-CVD and (b) the rapid carbonization of the Mo surface causes the formation of Mo{sub 2}C onto which diamond easily nucleates. The diamond nucleation density progressively increases at increasing methane percentages and is about 5x10{sup 10} cm{sup -2} at 4.0% methane. The improved nucleation kinetics of diamond on Mo interlayers facilitates the rapid formation of NCD films possessing a very low surface roughness down to {approx}6 nm, and allows a submicron thickness control.

36 MATERIALS SCIENCE↗

Seeded quantum FEL at 478 keV

We present for the first time the concept of a seeded {gamma} quantum Free-Electron-Laser (QFEL) at 478 keV, which has very different properties compared to a classical. The basic concept is to produce a highly brilliant {gamma} beam via SASE. To produce highly intense and coherent {gamma} beam, we intend to use a seeded FEL scheme. Important for the production of such a {gamma} beam are novel refractive {gamma}-lenses for focusing and an efficient monochromator, allowing to generate a very intense and coherent seed beam. The energy of the {gamma} beam is 478 keV, corresponding to a wavelength in the sub-Angstrom regime (1/38 A). To realize a coherent {gamma} beam at 478 keV, it is necessary to use a quantum FEL design. At such high radiation energies a classical description of the {gamma}-FEL becomes wrong.

43 PARTICLE ACCELERATORS↗

Control of seeding phase for a cascaded laser wakefield accelerator with gradient injection

We demonstrated experimentally the seeding-phase control for a two-stage laser wakefield accelerator with gradient injection. By optimizing the seeding phase of electrons into the second stage, electron beams beyond 0.5 GeV with a 3% rms energy spread were produced over a short acceleration distance of ∼2 mm. Peak energy of the electron beam was further extended beyond 1 GeV by lengthening the second acceleration stage to 5 mm. Time-resolved magnetic field measurements via magneto-optical Faraday polarimetry allowed us to monitor the processes of electron seeding and acceleration in the second stage.

36 MATERIALS SCIENCE↗

Effect of ZnO seed layer on the morphology and optical properties of ZnO nanorods grown on GaN buffer layers

ZnO nanorods were grown by chemical bath deposition on sputtered, polycrystalline GaN buffer layers with and without ZnO seed layer. Scanning electron microscopy and X-ray diffraction show that the ZnO nanorods on GaN buffer layers are not vertically well aligned. Photoluminescence spectrum of ZnO nanorods grown on GaN buffer layer, however exhibits a much stronger near-band-edge emission and negligible defect emission, compared to the nanorods grown on ZnO buffer layer. These features are attributed to gallium incorporation at the ZnO-GaN interface. The introduction of a thin (25 nm) ZnO seed layer on GaN buffer layer significantly improves the morphology and vertical alignment of ZnO-NRs without sacrificing the high optical quality of ZnO nanorods on GaN buffer layer. The presence of a thick (200 nm) ZnO seed layer completely masks the effect of the underlying GaN buffer layer on the morphology and optical properties of nanorods.

36 MATERIALS SCIENCE↗

Modification of the structural and magnetic properties of granular FePt films by seed layer conditioning

The steadily increasing amount of digital information necessitates the availability of reliable high capacity magnetic data storage. Here, future hard disk drives with extended areal storage densities beyond 1.0 Tb/in{sup 2} are envisioned by using high anisotropy granular and chemically L1{sub 0}-ordered FePt (002) perpendicular media within a heat-assisted magnetic recording scheme. Perpendicular texturing of the [001] easy axes of the individual grains can be achieved by using MgO seed layers. It is therefore investigated, if and how an Ar{sup +} ion irradiation of the MgO seed layer prior to the deposition of the magnetic material influences the MgO surface properties and hereby the FePt [001] texture. Structural investigations reveal a flattening of the seed layer surface accompanied by a change in the morphology of the FePt grains. Moreover, the fraction of small second layer particles and the degree of coalescence of the primarily deposited FePt grains strongly increases. As for the magnetic performance, this results in a reduced coercivity along the magnetic easy axis (out of plane) and in enhanced hard axis (in-plane) remanence values. The irradiation induced changes in the magnetic properties of the granular FePt-C films are traced back to the accordingly modified atomic structure of the FePt-MgO interface region.

36 MATERIALS SCIENCE↗

Measurement of the density profile of pure and seeded molecular beams by femtosecond ion imaging

Here, we report on femtosecond ion imaging experiments to measure the density profile of a pulsed supersonic molecular beam. Ion images are measured for both a molecular beam and bulk gas under identical experimental conditions via femtosecond multiphoton ionization of Xe atoms. We report the density profile of the molecular beam, and the measured absolute density is compared with theoretical calculations of the centre line beam density. Subsequently, we discuss reasons accounting for the differences between measurements and calculations and propose that strong skimmer interference is the most probable cause for the differences. Furthermore, we report on experiments measuring the centre line density of seeded supersonic beams. The femtosecond ion images show that seeding the heavy Xe atom at low relative seed fractions (1%-10%) in a light carrier gas like Ne results in strong relative enhancements of up to two orders of magnitude.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Film transfer enabled by nanosheet seed layers on arbitrary sacrificial substrates

An approach for film transfer is demonstrated that makes use of seed layers of nanosheets on arbitrary sacrificial substrates. Epitaxial SrTiO{sub 3}, SrRuO{sub 3}, and BiFeO{sub 3} films were grown on Ca{sub 2}Nb{sub 3}O{sub 10} nanosheet seed layers on phlogopite mica substrates. Cleavage of the mica substrates enabled film transfer to flexible polyethylene terephthalate substrates. Electron backscatter diffraction, X-ray diffraction, and atomic force microscopy confirmed that crystal orientation and film morphology remained intact during transfer. The generic nature of this approach is illustrated by growing films on zinc oxide substrates with a nanosheet seed layer. Film transfer to a flexible substrate was accomplished via acid etching.

36 MATERIALS SCIENCE↗

Effect of nickel seed layer on growth of α-V{sub 2}O{sub 5} nanostructured thin films

In this communication, we reported the role of Ni seed layer on the growth of vanadium pentoxide (α-V{sub 2}O{sub 5}) nanostructured thin films (NSTs) using plasma assisted sublimation process (PASP). Two different substrates, simple glass substrate and the Ni coated glass substrate (Ni thickness ∼ 100 nm) are employing in the present work. The influence of seed layer on structural, morphological, and vibrational properties have been studied systematically. The structural analysis divulged that both films deposited on simple glass as well as on Ni coated glass shown purely orthorhombic phase, no other phases are detected. The morphological studies of V{sub 2}O{sub 5} film deposited on both substrates are carried out by SEM, revealed that features of V{sub 2}O{sub 5} NSTs is completely modified in presence of Ni seed layer and the film possessing the excellent growth of nanorods (NRs) on Ni coated glass rather than simple glass. The HRTEM analysis of NRs is performed at very high magnification, shows very fine fringe pattern, which confirmed the single crystalline nature of nanorods. The vibrational study of NRs is performed using micro-Raman spectroscopy, which strongly support the XRD observations.

36 MATERIALS SCIENCE↗

Catalyst-free growth of ZnO nanowires on ITO seed/glass by thermal evaporation method: Effects of ITO seed layer thickness

A seed/catalyst-free growth of ZnO nanowires (ZnO-NWs) on a glass substrate were successfully fabricated using thermal evaporation technique. These nanowires were grown on ITO seed layers of different thicknesses of 25 and 75 nm, which were deposited on glass substrates by radio frequency (RF) magnetron sputtering. Prior to synthesized ITO nanowires, the sputtered ITO seeds were annealed using the continuous wave (CW) CO2 laser at 450 °C in air for 15 min. The effect of seed layer thickness on the morphological, structural, and optical properties of ZnO-NWs were systematically investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and UV-Vis spectrophotometer.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

NaCl nucleation from brine in seeded simulations: Sources of uncertainty in rate estimates

This work reexamines seeded simulation results for NaCl nucleation from a supersaturated aqueous solution at 298.15 K and 1 bar pressure. We present a linear regression approach for analyzing seeded simulation data that provides both nucleation rates and uncertainty estimates. Our results show that rates obtained from seeded simulations rely critically on a precise driving force for the model system. The driving force vs. solute concentration curve need not exactly reproduce that of the real system, but it should accurately describe the thermodynamic properties of the model system. We also show that rate estimates depend strongly on the nucleus size metric. We show that the rate estimates systematically increase as more stringent local order parameters are used to count members of a cluster and provide tentative suggestions for appropriate clustering criteria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved core-edge compatibility using impurity seeding in the small angle slot (SAS) divertor at DIII-D

Impurity seeding studies in the slot divertor (SAS) at DIII-D have revealed a strong relationship between the detachment onset and pedestal characteristics with both target geometry and impurity species. N 2 seeding in the slot has led to the first simultaneous observation of detachment on the entire suite of boundary diagnostics viewing the SAS without degradation of core confinement. SOLPS-ITER simulations with D+C+N, full cross-field drifts and n-n collisions activated are performed for the first time in DIII-D to interpret the behavior. This illustrates a strong effect of divertor configuration and plasma drifts on the recycling source distribution with significant consequences on plasma flows. Flow reversal is found for both main ions and impurities affecting strongly the impurity transport and providing an explanation for the observed dependence on strike point location of the detachment onset and impurity leakage found in the experiments. Matched discharges with either nitrogen or neon injection show that while nitrogen does not significantly affect the pedestal, neon leads to increased pedestal pressure gradient and improved pedestal stability. Little nitrogen penetrates in the core, but a great amount of neon is found in the pedestal consistent with the different ionization potentials of the two impurities. This research demonstrates that neutral and impurity distributions in the divertor can be controlled through variations in strike point locations in a fixed baffle structure. Divertor geometry combined with impurity seeding enables mitigated divertor heat flux balancing core contamination and thus leading to enhanced divertor dissipation and improved core-edge compatibility which are essential for ITER and for future fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A physics-informed deep learning model of the hot tail runaway electron seed

A challenging aspect of the description of a tokamak disruption is evaluating the hot tail runaway electron seed that emerges during the thermal quench. This problem is made challenging due to the requirement of describing a strongly non-thermal electron distribution, together with the need to incorporate a diverse range of multiphysics processes, including magnetohydrodynamic instabilities, impurity transport, and radiative losses. Here this work develops a physics-informed neural network (PINN) tailored to the solution of the hot tail seed during an axisymmetric thermal quench. Here, a PINN is developed to identify solutions to the adjoint relativistic Fokker–Planck equation in the presence of a rapid quench of the plasma's thermal energy. It is shown that the PINN is able to accurately predict the hot tail seed across a range of parameters, including the thermal quench timescale, initial plasma temperature, and local current density, in the absence of experimental or simulation data. The hot tail PINN is verified by comparison with direct Monte Carlo simulations, with excellent agreement found across a broad range of thermal quench conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Single-frequency, injection-seeded Er:YAG laser based on a bow-tie ring slave resonator

A diode pumped, injection-seeded Q-switched Er:YAG laser at 1645.2 nm is demonstrated. A single frequency Er:YAG monolithic nonplanar ring oscillator (NPRO) laser emitting at 1645.24 nm with a maximum output power of 500 mW is used as a seed laser. The seed laser output is injected into a bow-tie slave laser, obtaining stable single-frequency Q-switched operation of the Er:YAG laser. The maximum single-frequency Q-switched Er:YAG laser output energy is 2.9 mJ at 100 Hz with a pulse duration of 160 ns. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structure-based design of nanobodies that inhibit seeding of Alzheimer’s patient–extracted tau fibrils

Despite much effort, antibody therapies for Alzheimer’s disease (AD) have shown limited efficacy. Challenges to the rational design of effective antibodies include the difficulty of achieving specific affinity to critical targets, poor expression, and antibody aggregation caused by buried charges and unstructured loops. To overcome these challenges, we grafted previously determined sequences of fibril-capping amyloid inhibitors onto a camel heavy chain antibody scaffold. These sequences were designed to cap fibrils of tau, known to form the neurofibrillary tangles of AD, thereby preventing fibril elongation. The nanobodies grafted with capping inhibitors blocked tau aggregation in biosensor cells seeded with postmortem brain extracts from AD and progressive supranuclear palsy (PSP) patients. The tau capping nanobody inhibitors also blocked seeding by recombinant tau oligomers. Another challenge to the design of effective antibodies is their poor blood–brain barrier (BBB) penetration. In this study, we also designed a bispecific nanobody composed of a nanobody that targets a receptor on the BBB and a tau capping nanobody inhibitor, conjoined by a flexible linker. We provide evidence that the bispecific nanobody improved BBB penetration over the tau capping inhibitor alone after intravenous administration in mice. Our results suggest that the design of synthetic antibodies that target sequences that drive protein aggregation may be a promising approach to inhibit the prion-like seeding of tau and other proteins involved in AD and related proteinopathies.

60 APPLIED LIFE SCIENCES↗

The achievement of the T e,div feedback control by CD 4 seeding on EAST

A multi-function divertor feedback control system has been built on Experimental Advanced Superconducting Tokamak (EAST) to treat the divertor heat load issue. With the real-time data of the Langmuir probes and the impurity seeding, the divertor electron temperature (T e,div ) is well controlled to achieve the partial detachment phase. The first trial of the CD 4 seeding for the T e,div reduction has been achieved on EAST long-pulse discharge. In the seeding phase, the T e,div was maintained close to 5 eV, and the surface temperature of the target plate (T surface,div ) had a reduction of about 150° C. The plasma stored energy had a reduction in the control phase, so it is necessary to find a way to keep the good plasma confinement in the next step. The CD 4 injection also mitigated the low hybrid wave coupling rate in some degree. The big volume of the CD 4 injection lifted the Greenwald density fraction from ~0.4 to ~0.7, which made the SOL into high recycling state. As a result, most of the injected carbon particles were in the high ionized state, and with the lower of the T e,div , the tungsten line emission was suppressed obviously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Can the observed large scale magnetic fields be seeded by helical primordial fields?

Gravitational wave production induces a strong constraint on the amplitude of a primordial magnetic field. It has been shown that the nucleosynthesis bound for a stochastic gravitational wave background implies that causally generated fields cannot have enough power on large scales to provide the seeds necessary for the observed magnetic fields in galaxies and clusters, even by the most optimistic dynamo amplification. Magnetic fields generated at inflation can have high enough amplitude only if their spectrum is very red. Here we show that helicity, which leads to an inverse cascade, can mitigate these limits. In particular, we find that helical fields generated at the QCD phase transition or at inflation with red spectrum are possible seeds for the dynamo. Helical fields generated at the electroweak phase transition are instead excluded as seeds at large scales. We also calculate the spectrum of gravitational waves generated by helical magnetic fields.

79 ASTRONOMY AND ASTROPHYSICS↗