Development of Low-Cost Satellite Communications System for Helicopters and General Aviation
Explore the source record for details and available documents.
helicopters general aviation satellite communicati↗
SEARCH · Engineering Papers
Results for “SATELLITE COMMUNICATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Silicon-Germanium Fast Packet Switch Developed for Communications Satellites
Emerging multimedia applications and future satellite systems will require high-speed switching networks to accommodate high data-rate traffic among thousands of potential users. This will require advanced switching devices to enable communication between satellites. The NASA Lewis Research Center has been working closely with industry to develop a state-of-the-art fast packet switch (FPS) to fulfill this requirement. Recently, the Satellite Industry Task Force identified the need for high-capacity onboard processing switching components as one of the "grand challenges" for the satellite industry in the 21st century. In response to this challenge, future generations of onboard processing satellites will require low power and low mass components to enable transmission of services in the 100 gigabit (1011 bits) per second (Gbps) range.
Quintana, Jorge A.↗
Comparative study of FDMA, TDMA and hybrid 30/20 GHz satellite communications systems for small users
This study compares several satellite uplink and downlink accessing schemes for a Customer Premises Service. Four conceptual system designs are presented: Satellite-Routed FDMA, Frequency-Routed TDMA, Satellite-Switched TDMA, and Processor-Routed TDMA, operating in the 30/20 GHz band. The designs are compared on the basis of estimated satellite weight, power consumption, and cost. The system capacities are analyzed for a fixed multibeam coverage of CONUS. Analysis shows that the system capacity is limited by the available satellite resources and by the terminal size and cost.
Berk, G.↗
Public Service Communications Satellite User Requirements Workshop
Information on user requirements for public service communications was acquired to provide the basis of a study to determine the optimum satellite system to satisfy user requirements. The concept for such a system is described: Topics discussed included requirements for data and message services, elementary and secondary education, extension and continuing education, environmental communications, library services, medical education, medical services, public broadcasting, public safety, religious applications, state and local communications, and voluntary services. Information was also obtained on procedures to follow to make the transfer to commercial services.
Wolff, E. A.↗
Determination of the Required Number of Randomly Spaced Communication Satellites
An investigation has been made f o r determining the minimum number of passive satellites i n near-earth orbits required t o provide given percentages of communication time between two selected ground stations. The study is limited to the geometrical and probability aspects of the problem. An application of the analysis i s made f o r an assumed transatlantic communication system. The satellites are considered t o be i n circular, randomly spaced orbits with fixed inclination and altitude considered range from 1,000 t o 3,000 statute miles.
Bennett, Floyd V.↗
K-Band Phased Array Developed for Low- Earth-Orbit Satellite Communications
Future rapid deployment of low- and medium-Earth-orbit satellite constellations that will offer various narrow- to wide-band wireless communications services will require phased-array antennas that feature wide-angle and superagile electronic steering of one or more antenna beams. Antennas, which employ monolithic microwave integrated circuits (MMIC), are perfectly suited for this application. Under a cooperative agreement, an MMIC-based, K-band phased-array antenna is being developed with 50/50 cost sharing by the NASA Lewis Research Center and Raytheon Systems Company. The transmitting array, which will operate at 19 gigahertz (GHz), is a state-of-the-art design that features dual, independent, electronically steerable beam operation ( 42 ), a stand-alone thermal management, and a high-density tile architecture. This array can transmit 622 megabits per second (Mbps) in each beam from Earth orbit to small Earth terminals. The weight of the total array package is expected to be less than 8 lb. The tile integration technology (flip chip MMIC tile) chosen for this project represents a major advancement in phased-array engineering and holds much promise for reducing manufacturing costs.
Anzic, Godfrey↗
System analysis for millimeter-wave communication satellites
Research and development needs for millimeter-wave space communication systems are presented. Assumed propagation fade statistics are investigated along with high data rate diversity link and storage. The development of reliable ferrite switches, and high performance receivers and transmitters is discussed, in addition to improved tolerance of dish and lens fabrication for the antennas. The typical cost for using a simplex voice channel via a high capacity 40/50 GHz satellite is presented.
Holland, L. D.↗
Self-powered arctic satellite communication system by harvesting wave energy using a triboelectric nanogenerator
Not Available
16 TIDAL AND WAVE POWER↗
The use of geostationary platforms for future U.S. domestic satellite communications
Quantitative analyses of the relative costs and utilization of the available geostationary orbital arc and radio spectrum allocations between large spacecraft platforms and future individual satellites used for communications in the U.S. and the Atlantic Basin are presented. Attention is given to the high capacity and the switching capabilities of the platforms, and the frequency ranges (6/4, 14/12, and 30/20 GHz) at which they can operate. In addition, characteristics of conventional satellites, earth station design, and the connectivity of satellite systems are discussed.
Fordyce, S.↗
Trans-Pacific HDR Satellite Communications Experiment Phase-2: Experimental Network and Demonstration Plan
This paper describes the experimental network configuration, application demonstration, and performance evaluation plan of the second phase experiment.
Global↗
Rejection of multipath interference in satellite communications by use of narrow-band filters.
Earth reflected multipath interference rejection by narrow band filters in communications between near earth spacecraft and stationary satellites
Durrani, S. H.↗
Continuation of the compendium of applications technology satellite and communications technology satellite user experiments 1967-1977, volume 2
Approximately 453 reports, papers, and articles catalogued into an information retrieval system, covering communications experiments and demonstrations conducted, utilizing the Communications Technology Satellite and the Applications Technology Satellites 1, 3, 5, and 6 are listed.
Engler, N. A.↗
Study on networking issues of medium earth orbit satellite communications systems
Two networking issues of communications systems with medium earth orbit (MEO) satellites, namely network architectures and location determination and registration methods for hand-held terminals, are investigated in this paper. For network architecture, five candidate architectures are considered and evaluated in terms of signaling traffic. For location determination and registration, two methods are discussed and evaluated.
Araki, Noriyuki↗
Performance and operational considerations in the design of vehicle antennas for mobile satellite communications
This paper examines the vehicle antenna requirements for mobile satellite systems. The antenna parameters are discussed in the light of the requirements and the limitations in performance imposed by the physical constraints of antenna and by vehicle geometries. Measurements of diffraction and antenna noise temperature in an operational environment are examined, as well as their effects on system margins. Mechanical versus electronic designs are compared with regards to performance, cost, reliability, and design complexity. Comparisons between open-loop and close-loop tracking systems are made and the effects of bandwidth, sidelobe levels, operational constraints, vehicle angular velocity, and acceleration are discussed. Some consideration is given to the use of hybrid systems employing both open and closed-loop tracking. Changes to antenna/terminal specifications are recommended which will provide greater design flexibility and increase the likelihood of meeting the performance and operational requirements.
Milne, R.↗
Design and Implementation of a Lunar Communications Satellite and Server for the 2012 SISO Smackdown
Last year, the Simulation Interoperability Standards Organization (SISO) inaugurated the now annual High Level Architecture (HLA) Smackdown at the Spring Simulation Interoperability Workshop (SIW). A primary objective of the Smackdown event is to provide college students with hands-on experience in the High Level Architecture (HLA). The University of Alabama in Huntsville (UAHuntsville) fielded teams in 2011 and 2012. Both the 2011 and 2012 smackdown scenarios were a lunar resupply mission. The 2012 UAHuntsville fielded four federates: a communications network Federate called Lunar Communications and Navigation Satellite Service (LCANServ) for sending and receiving messages, a Lunar Satellite Constellation (LCANSat) to put in place radios needed by the communications network for Line-Of-Sight communication calculations, and 3D graphical displays of the orbiting satellites and a 3D visualization of the lunar surface activities. This paper concentrates on the first two federates by describing the functions, algorithms, the modular FOM, experiences, lessons learned and recommendations for future Smackdown events.
Bulgatz, Dennis↗
Masers for the telstar satellite communications experiment
This paper discusses the design and characteristics of ruby traveling-wave masers operating at 4 gc. These masers, characterized by an average gain of ≈35 db over a bandwidth of 25 mc, are equipped with waveguide input transmission lines, rather than the previously employed coaxial cables. This change results in an over-all noise temperature of 3.5°K for these devices, rather than the 10°K exhibited by earlier masers. The maser noise temperature now closely approximates sky temperatures, which set the ultimate limit on earthbound receiver sensitivity. The improvements to be had by further reduction in amplifier noise are therefore almost negligible. A less well known maser property, i.e., its freedom from distortion, even when driven well into gain saturation, is discussed.
TELSTAR SATELLITE↗
Results of thin-route satellite communication system analyses including estimated service costs
Ways for determining optimum satellite and terrestrial system architectures and parameters for providing the most economical telephone service to remote areas of the U.S. are explored. Several configurations for an isolated rural telephone system, covering all the states plus Alaska, employing satellites is considered. Both direct-to-the-user and community-type of systems are evaluated using UHF and Ku-band RF equipment for the rural/satellite links. The effect of multiple spot beams, outage, signal quality, modulation method, satellite accessing, forward error correction, and the number of users are also evaluated. The total cost for a 5-minute call from an isolated rural user to a TELCO user was shown to be as low as $1.30 for a system with 1.8 X 10 to the sixth rural users.
Wright, D. L.↗