Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Study of the effects of gaseous environments on sulfidation attack of superalloys

Studies were conducted to examine the effect of the gaseous corrodents NaCl, HCl, and NaOH on the high temperature oxidation and Na2SO4-induced corrosion behavior of the alumina former NiAl, the chromia former Ni-25 wt.% Cr, elemental Cr, and the superalloy B-1900. Experiments were conducted at 900 and 1050 C in air in the presence and absence of the gaseous corrodents. Effects involving both reaction rates and microstructural changes in oxide morphology were observed due to the presence of these corrodents at levels anticipated to be present in operating industrial and marine gas turbines. The effect of gaseous NaCl, HCl, and possibly NaOH on NiAl in simple oxidation was to remove aluminum from below the protective alumina layer and to simultaneously weaken the adherence of the protective alumina oxide scale to the substrate. The aluminum removed from below the oxide scale was redeposited on its surface as alpha-Al2O3 whiskers. With respect to the chromia formers, gaseous NaCl and HCl promoted breakaway oxidation kinetics and changes in the microstructures of the oxide scales.

Smeggil, J. G.↗
NASA NTRS1977

The model of the composition of the Martian atmosphere

Global mean distributions of Martian atmospheric components concentrations from the planet's surface up to an altitude of 250 km are calculated. Improved data on the turbulent mixing coefficient, as a function of altitude, on temperature distribution and on chemical and photochemical reaction rates are used. The model data agree well with available measurements of some components concentrations. Variations of composition due to long-period variations of temperature, moisture and turbulent mixing are investigated. The relative significance of different catalytic cycles and the important role of excited atoms 0 (d-1) are revealed.

Izakov, M. N.↗
NASA NTRS1978

An assessment of the effect of supersonic aircraft operations on the stratospheric ozone content

An assessment of the potential effect on stratospheric ozone of an advanced supersonic transport operations is presented. This assessment, which was undertaken because of NASA's desire for an up-to-date evaluation to guide programs for the development of supersonic technology and improved aircraft engine designs, uses the most recent chemical reaction rate data. From the results of the present assessment it would appear that realistic fleet sizes should not cause concern with regard to the depletion of the total ozone overburden. For example, the NOx emission of one type designed to cruise at 20 km altitude will cause the ozone overburden to increase by 0.03% to 0.12%, depending upon which vertical transport is used. These ozone changes can be compared with the predictions of a 1.74% ozone decrease (for 100 Large SST's flying at 20 km) made in 1974 by the FAA's Climatic Impact Assessment Program.

Poppoff, I. G.↗
NASA NTRS1977

Ignition of magnesium powders in shock wave induced flows

Ignition of magnesium powders, resulting from an interaction with incident shock wave-induced flows, has been studied. A numerical analysis of particle dynamics and heating is presented and compared with experimental measurements. The induction period is strongly dependent on convective heat transfer and not on chemical reaction rate. Experimentally observed ignition delays were on the order of 100 microns and were inversely dependent on shock strength and initial pressure, directly dependent on particle size and cloud concentration, and independent of oxygen concentration down to 2.3 percent oxygen. Good agreement between experiment and theory was realized.

Fox, T. W.↗
NASA NTRS1978

Chemical reactions in low-g

The Apollo-Soyuz flight experiment, 'Chemical Foams' demonstrated that foams and air/liquid dispersions are much more stable in low-gravity than on the ground. It thus should be possible to conduct unique chemical reactions in space foams. The low-g results and subsequent ground work on the formaldehyde clock reaction indicate that the reaction is strongly influenced by (1) dissociated and undissociated solution species being adsorbed at solid/liquid and gas/liquid surfaces and (2) chemical reaction rates apparently being affected by long-range forces determined by the liquid mass and the extent and nature of all surface interfaces.

Grodzka, P. G.↗
NASA NTRS1978

Feasibility of an orbital simulator of stratospheric photochemistry

It is proposed that a stratospheric photochemistry simulator could be created in sun-synchronous orbit, so that diffusion and photochemistry could be decoupled and uncertainties in photochemical reaction rates could be substantially reduced. The proposed test chamber is described, and it is suggested that the technology of superpressure balloons seems to be the best short-term solution to the construction of the proposed facility. Both unreinforced polyester films and gelatin films are considered as candidate chamber coatings. It is noted that the experiments can be performed early in the space-manufacturing era and that at least three dedicated Shuttle launches will be required to establish the proposed facility.

Matloff, G. L.↗
NASA NTRS1978

The uncertainty in ozone calculations by a stratospheric photochemistry model

At present, there is an apparent conflict between one-dimensional stratospheric photochemistry models used in predicting ozone depletion and average data for stratospheric ozone. This conflict is in three particulars - column density of O3 and ozone density in the regions around 30 km and 50 km altitude. A study of the sensitivity of one such model to the values of reaction rates, boundary conditions, solar intensities, photolysis cross sections, and O(1D) yield parameters reveals that even at the 2-sigma uncertainty limit due to these input parameters, the model does not overlap the data for O3 density at 30 km and 50 km. The data is outside the 1-sigma model uncertainty limit for O3 column density. The study also shows the relative contribution of the various parameters studied to the imprecision in these model results.

Butler, D. M.↗
NASA NTRS1978

Nitrogen tetroxide scrubber data analysis

A major difficulty in the analysis of scrubber data is that of separating the physical effects, such as mass transfer, from the physico-chemical effects, such as reaction rates. This is especially true for the absorbtion of nitrogen tetroxide in the various liquids that were tested in the NASA-Kennedy Space Center Hypergolic Toxic Scrubber Program. A fruitful approach to correlating the data for outlet concentrations was to treat the overall absorbtion as a pseudo first-order absorbtion equation. This approach provided a method for normalizing the data to constant inlet concentration, constant sump liquor condition, and constant scrubbing time, and permitted evaluation of the test and fluid parameters that affected both absorbtion rate and scrubbing time. The analysis indicated that scrubber performance may be improved by optimizing liquor concentrations and liquor flowrate distributions.

Simon, E. D.↗
NASA NTRS1979

Analysis of ultraviolet spectrophotometric data from Copernicus

Ultraviolet spectral data from the OAO 3 satellite are being used to study interstellar absorption lines and stellar and circumstellar lines in hot stars. The interstellar data are beneficial in analyzing the depletions of heavy elements from the gas phase and in elucidating how these depletions depend on physical conditions. Abundances in separate velocity components were determined from line profiles. Observations were carried out for interstellar abundances, both atomic and molecular, towards a number of stars. The better quality data are being analyzed for profile information and the lesser data are being used in curve-of-growth analyses. Molecular observations were carried out as well, N2 was sought; interstellar C2 was detected and its rotational excitation utilized to establish limits in interstellar cloud temperatures. An extensive search for H2O resulted in a tentative identification which will produce new information on chemical reaction rates. Interstellar depletions and grain properties in the rho Ophiuchi cloud, stellar wind variability, and circumstellar lines are also under study.

Snow, T. P., Jr.↗
NASA NTRS1979

Microscopic phenomena and a modern approach to turbulence

The use of an arc driven shock tube as a technique in the study of turbulence and evidence to support a kinetic theory of turbulence are described. Topics covered include: (1) reaction rate distortion in turbulent flow; (2) turbulent bursts in a shock tube; (3) driver gas flow with fluctuations; (4) improving the Mach number capabilities of arc driver shock tubes; and (5) resonant absorption in an argon plasma at thermal equilibrium.

Johnson, J. A., III↗
NASA NTRS1978

The role of computational chemistry in the science and measurements of the atmosphere

The role of computational chemistry in determining the stability, photochemistry, spectroscopic parameters, and parameters for estimating reaction rates of atmospheric constituents is discussed. Examples dealing with the photolysis cross sections of HOCl and (1 Delta g) O2 and with the stability of gaseous NH4Cl and asymmetric ClO3 are presented. It is concluded that computational chemistry can play an important role in the study of atmospheric constituents, particularly reactive and short-lived species which are difficult to investigate experimentally.

Phillips, D. H.↗
NASA NTRS1978

Tropospheric ozone

Photochemical equilibrium models have been used to study the effect of recent revisions in important chemical reaction rates on the calculated tropospheric ozone concentration. Reasonable agreement with observed values is obtained if the NO(x) background is approximately 0.02 to 0.03 ppb, about an order of magnitude less than used in many previous model studies, but consistent with present nitrogen budget considerations and with observations of NO2. Chemical production and loss of ozone may dominate transport terms depending on values of key chemical rate constants and of the NO(x) background. This is consistent with the structure observed in the mean annual latitudinal distribution of ozone since ozone is its own chemical precursor and regions of enhanced stratosphere-troposphere exchange are also regions of enhanced photochemical activity.

Stewart, R. W.↗
NASA NTRS1978

Stratospheric-related research using the shock tube

The capabilities of shock tubes used in stratospheric-related research are considered, and the results of three independent shock tube research projects are reported. The studies are concerned with the evaluation of stratospheric ozone depletion. In the first experiment, photoabsorption cross sections of Freon 11 and 12 at stratospheric temperatures were measured using rarefaction waves. In the second experiment, reaction-rate coefficients were determined from measurements made behind reflected shock waves. In the third experiment, electronic-transition moments of the O2 Schumann-Runge system and the A2Pi-X2Pi system of ClO were deduced from intensity measurements made behind the incident shock.

Cooper, D. M.↗
NASA NTRS1979

Input sensitivity study of a stratospheric photochemistry model

A general technique for calculating the sensitivities, uncertainties and overall imprecision of a model to a set of input parameters is described and applied to the calculation of CFM (chlorofluoromethane) induced stratospheric ozone depletion. The input data set used is reaction rates and the technique highlights those that most need further study in the laboratory. The convolution of individual uncertainties to obtain an overall imprecision gives good agreement with the results of Monte-Carlo calculations using the same model.

Butler, D. M.↗
NASA NTRS1979

Ion velocity distributions in the high-latitude ionosphere

The theory and observations relating to ion velocity distributions in the high-latitude F region are reviewed. The review covers three basic aspects, including methods for calculating ion velocity distributions, experimental evidence for the existence of non-Maxwellian ion velocity distributions, and the ionospheric consequences of non-Maxwellian distributions. Specific topics covered include closed form solutions to Boltzmann's equation for a simple collision model, series solutions to the Boltzmann equation for more general collision models, retarding potential analyzer measurements, excitation of VLF electrostatic emissions, ion-neutral reaction rates, and transport effects.

St-Maurice, J.-P.↗
NASA NTRS1979

Acoustic diagnostics of the nonpremixed turbulent jet flame

The feasibility of inferring information regarding turbulence and combustion details in turbulent combustion zones through the acoustic field is explored. The well known theoretical formulation of Strahle is used. The real difficulty in prediction of the acoustic field is seen to be the unavailability of an expression for the local, instantaneous reaction rate in a turbulent field. A simplified expression is used to infer the nature of the acoustic field. Based on earlier photographic observations, a model is used as a working hypothesis to extract information regarding the acoustic field. These are seen to be substantiated by experiments as well. More importantly, it is found that changes in the operating conditions of various burners are almost instantly revealed in the acoustic spectra. Several experiments with a laboratory burner using several different gaseous reactants are reported to support this diagnostic information content of the acoustic fields of turbulent combustion zones.

Ramohalli, K.↗
NASA NTRS1980

LOX/GOX mechanical impact tester assessment

The performances of three existing high pressure oxygen mechanical impact test systems were tested at two different test sites. The systems from one test site were fabricated from the same design drawing, whereas the system tested at the other site was of different design. Energy delivered to the test sample for each test system was evaluated and compared. Results were compared to the reaction rates obtained.

Bransford, J. W.↗