Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Wind-tunnel evaluation of an advanced main-rotor blade design for a utility-class helicopter

An investigation was conducted in the Langley Transonic Dynamics Tunnel to evaluate differences between an existing utility-class main-rotor blade and an advanced-design main-rotor blade. The two rotor blade designs were compared with regard to rotor performance oscillatory pitch-link loads, and 4-per-rev vertical fixed-system loads. Tests were conducted in hover and over a range of simulated full-scale gross weights and density altitude conditions at advance ratios from 0.15 to 0.40. Results indicate that the advanced blade design offers performance improvements over the baseline blade in both hover and forward flight. Pitch-link oscillatory loads for the baseline rotor were more sensitive to the test conditions than those of the advanced rotor. The 4-per-rev vertical fixed-system load produced by the advanced blade was larger than that produced by the baseline blade at all test conditions.

Yeager, William T., Jr.↗
NASA NTRS1987

A prediction of helicopter rotor discrete frequency noise for three scale models using a new acoustics program

A new computer program which uses Farassat's most advanced subsonic time domain formulation has been written to predict helicopter rotor discrete frequency noise. A brief description of the program, WOPWOP, is followed by a comparison of predicted and experimentally measured acoustic pressure and spectra for a 1/4 scale UH-1 model rotor blade and a 1/7 scale OLS (AH-1G) model rotor blade. The C81 computer program was used to predict the spanwise loading on the rotor for aerodynamic input into the acoustic prediction. Comparisons are made for different flight conditions and microphone locations with good results. In general the acoustic pressure is underpredicted. The acoustic predictions for a tapered rotor blade and predictions for microphones well below the tip path plane show less underprediction. Finally, in-plane motion of the rotor blade is shown to significantly affect the peak-to-peak amplitude of the acoustic pressure for high advancing tip Mach numbers.

Brentner, Kenneth S.↗
NASA NTRS1987

Acoustic results of the blade-vortex interaction acoustic test of a 40 percent model rotor in the DNW

Acoustic data of a 40 percent scale model of the 4-bladed B0-105 main rotor, measured in a large test section aeroacoustic wind tunnel, are presented. Rotor blade-vortex interaction (BVI) noise data were acquired using a traversing in-flow microphone array in the low to moderate speed flight range. Results are presented which document the flight conditions for maximum BVI impulsive noise; assess the acoustic farfield by BVI noise; map the directivity of BVI impulsive noise in a large plane below and upstream of the rotor; illustrate the temporal characteristics of the BVI signals as a function of tip-speed-ratio; and show the existence of retreating side BVI signals. The occurrence of a strongly focused radiation pattern, as opposed to a more omnidirectional pattern, was found to be very dependent on the rotor operating condition. Multiple interactions per blade were observed at the lowest speed cases, with broader impulsive content, while the higher speed cases exhibited fewer interactions per blade, with much sharper, higher amplitude acoustic signals. BVI acoustic signals were measured under the aft retreating quadrant of the rotor and found to originate from the retreating side of the rotor.

Martin, Ruth M.↗
NASA NTRS1986

A comparison of the acoustic and aerodynamic measurements of a model rotor tested in two anechoic wind tunnels

Two aeroacoustic facilities - the CEPRA 19 in France and the DNW in the Netherlands - are compared. The two facilities have unique acoustic characteristics that make them appropriate for acoustic testing of model-scale helicopter rotors. An identical pressure-instrumented model-scale rotor was tested in each facility and acoustic test results are compared with full-scale-rotor test results. Blade surface pressures measured in both tunnels were used to correlated nominal rotor operating conditions in each tunnel, and also used to assess the steadiness of the rotor in each tunnel's flow. In-the-flow rotor acoustic signatures at moderate forward speeds (35-50 m/sec) are presented for each facility and discussed in relation to the differences in tunnel geometries and aeroacoustic characteristics. Both reports are presented in appendices to this paper.

Boxwell, D. A.↗
NASA NTRS1985

Mach number scaling of helicopter rotor blade/vortex interaction noise

A parametric study of model helicopter rotor blade slap due to blade vortex interaction (BVI) was conducted in a 5 by 7.5-foot anechoic wind tunnel using model helicopter rotors with two, three, and four blades. The results were compared with a previously developed Mach number scaling theory. Three- and four-bladed rotor configurations were found to show very good agreement with the Mach number to the sixth power law for all conditions tested. A reduction of conditions for which BVI blade slap is detected was observed for three-bladed rotors when compared to the two-bladed baseline. The advance ratio boundaries of the four-bladed rotor exhibited an angular dependence not present for the two-bladed configuration. The upper limits for the advance ratio boundaries of the four-bladed rotors increased with increasing rotational speed.

Leighton, Kenneth P.↗
NASA NTRS1987

Helicopter main-rotor speed effects on far-field acoustic levels

The design of a helicopter is based on an understanding of many parameters and their interactions. For example, in the design stage of a helicopter, the weight, engine, and rotor speed must be considered along with the rotor geometry when considering helicopter operations. However, the relationship between the noise radiated from the helicopter and these parameters is not well understood, with only limited model and full-scale test data to study. In general, these data have shown that reduced rotor speeds result in reduced far-field noise levels. This paper reviews the status of a recent helicopter noise research project designed to provide experimental flight data to be used to better understand helicopter rotor-speed effects on far-field acoustic levels. Preliminary results are presented relative to tests conducted with a McDonnell Douglas model 500E helicopter operating with the rotor speed as the control variable over the range of 103% of the main-rotor speed (NR) to 75% NR, and with the forward speed maintained at a constant value of 80 knots.

Mueller, Arnold W.↗
NASA NTRS1987

Analysis of a fixed-pitch X-wing rotor employing lower surface blowing

Lower surface blowing (LSB) is investigated as an alternative to the variable blade pitch requirement for the X-wing Circulation Control (CC) rotor concept. Addition trailing edge blowing slots on the lower surfaces of CC airfoils provide a bidirectional lift capability that effectively doubles the control range. The operational requirements of this rotor system are detailed and compared to the projected performance attributes of LSB airfoils. Analysis shows that, aerodynamically, LSB supplies a fixed pitch rotor system with the equivalent lift efficiency and rotor control of present CC rotor designs that employ variable blade pitch. Aerodynamic demands of bidirectional lift production are predicted to be within the capabilities of current CC airfoil design methodology. Emphasis in this analysis is given to the high speed rotary wing flight regime unique to stoppable rotor aircraft. The impact of a fixed pitch restriction in hover and low speed flight is briefly discussed.

Schwartz, Alan W.↗
NASA NTRS1989

Influence of rubbing on rotor dynamics, part 1

The results of analytical and experimental research on rotor-to-stationary element rubbing in rotating machines are presented. A characterization of physical phenomena associated with rubbing, as well as a literature survey on the subject of rub is given. The experimental results were obtained from two rubbing rotor rigs: one, which dynamically simulates the space shuttle main engine high pressure fuel turbopump (HPFTP), and the second one, much simpler, a two-mode rotor rig, designed for more generic studies on rotor-to-stator rubbing. Two areas were studied: generic rotor-to-stator rub-related dynamic phenomena affecting rotating machine behavior and applications to the space shuttle HPFTP. An outline of application of dynamic stiffness methodology for identification of rotor/bearing system modal parameters is given. The mathematical model of rotor/bearing/seal system under rub condition is given. The computer program was developed to calculate rotor responses. Compared with experimental results the computed results prove an adequacy of the model.

Muszynska, Agnes↗
NASA NTRS1989

Performance and loads data from an outdoor hover test of a Lynx tail rotor

A Lynx tail rotor was tested in hover at the Outdoor Aerodynamic Research Facility at NASA Ames Research Center. The test objectives were to measure the isolated rotor performance to provide a baseline for subsequent testing, and to operate the rotor throughout the speed and collective envelope before testing in the NFAC 40- by 80-Foot Wind Tunnel. Rotor forces and blade bending moments were measured at ambient wind conditions from zero to 6.23 m/sec. The test envelope was limited to rotor speeds of 1550 to 1850 rpm and minus 13 deg to plus 20 deg of blade collective pitch. The isolated rotor performance and blade loads data are presented.

Signor, David B.↗
NASA NTRS1989

Grid refinement studies of turbine rotor-stator interaction

Results from a three-dimensional, time-accurate Navier-Stokes simulation of rotor-stator interaction in an axial turbine stage are presented. The present study uses a fine grid in the spanwise direction to better resolve endwall and tip cllearance effects and complements coarse-grid calculations that were reported earlier. A realistic turbine stage with 22 stator vanes and 28 rotor blades is simulated as a single-stator, single-rotor airfoil combination with the stator geometry modified to properly account for blockage effects. This is in contrast to the earlier coarse-grid calculations where the rotor geometry was modified. The improved grid resolution and the unmodified rotor geometry result in a more accurate simulation of the flow field, particularly in the rotor channel where the interaction effects are more severe. The numerical results are compared to experimental data wherever possible and to earlier calculations.

Madavan, N. K.↗
NASA NTRS1989

A prediction of high-speed rotor noise

A combined computational (CFD) and integral approach solves the acoustic pressure fields of two high-speed helicopter rotors. A CFD code supplies boundary data to a non-linear type of Kirchhoff integral formulation to find the far-field pressures. Direct calculations of pressures are given by the CFD code up to the sonic cylinder where the Kirchhoff method takes over. This paper shows predictions and measurements of High-Speed Impulsive (HSI) noise in hover for two different rotor geometries. One rotor has a conventional rectangular planform, while the other rotor is highly swept and tapered. The swept rotor analysis forms the majority of this paper. Test data from both rotors are shown and compared with predictions for a range of tip Mach numbers from .85 to .95 (including delocalization). The correlation with the near-field pressures from the straight bladed experiment is excellent and good to excellent correlation is seen for the far-field pressures from both experiments.

Purcell, Timothy W.↗
NASA NTRS1990

Effect of Blade Planform Variation on a Small-Scale Hovering Rotor

A hover test was conducted on a small-scale rotor model for three sets of tapered rotor blades and a baseline rectangular planform rotor blade. All configurations had the same airfoils, twist, and thrust-weighted solidity. The tapered blade planforms had taper initiating at 50, 75, and 94 percent of the blade radius with a taper ratio of 3 to 1 for each blade set. The experiment was conducted for a range of thrust coefficients, and the data were compared to the predictions of three hover analysis methods. The data show the 94 percent tapered blade was slightly more efficient at the higher rotor thrust levels. The other tapered planform rotors did not show the expected improvement over the baseline rotor, and all configurations had similar performance for low thrust coefficients. None of the analysis methods correlated well with the experimental data.

Althoff, Susan L.↗
NASA NTRS1990

Aerodynamic Performance of a 0.27-Scale Model of an AH-64 Helicopter with Baseline and Alternate Rotor Blade Sets

Performance of a 27 percent scale model rotor designed for the AH-64 helicopter (alternate rotor) was measured in hover and forward flight and compared against and AH-64 baseline rotor model. Thrust, rotor tip Mach number, advance ratio, and ground proximity were varied. In hover, at a nominal thrust coefficient of 0.0064, the power savings was about 6.4 percent for the alternate rotor compared to the baseline. The corresponding thrust increase at this condition was approx. 4.5 percent which represents an equivalent full scale increase in lift capability of about 660 lbs. Comparable results were noted in forward flight except for the high thrust, high speed cases investigated where the baseline rotor was slightly superior. Reduced performance at the higher thrusts and speeds was likely due to Reynolds number effects and blade elasticity differences.

Kelley, Henry L.↗
NASA NTRS1990

Helicopter far-field acoustic levels as a function of reduced main-rotor advancing blade-tip Mach number

During the design of a helicopter, the weight, engine, rotor speed, and rotor geometry are given significant attention when considering the specific operations for which the helicopter will be used. However, the noise radiated from the helicopter and its relationship to the design variables is currently not well modeled with only a limited set of full-scale field test data to study. In general, limited field data have shown that reduced main-rotor advancing blade-tip Mach numbers result in reduced far-field noise levels. The status of a recent helicopter noise research project is reviewed. It is designed to provide flight experimental data which may be used to further understand helicopter main-rotor advancing blade-tip Mach number effects on far-field acoustic levels. Preliminary results are presented relative to tests conducted with a Sikorsky S-76A helicopter operating with both the rotor speed and the flight speed as the control variable. The rotor speed was operated within the range of 107 to 90 percent NR at nominal forward speeds of 35, 100, and 155 knots.

Mueller, Arnold W.↗
NASA NTRS1991

Low-Speed Wind-Tunnel Test of an Unpowered High-Speed Stoppable Rotor Concept in Fixed-Wing Mode

An experimental investigation of the M85, a High Speed Rotor Concept, was conducted at the NASA Langley 14 x 22 foot Subsonic Tunnel, assisted by NASA-Ames. An unpowered 1/5 scale model of the XH-59A helicopter fuselage with a large circular hub fairing, two rotor blades, and a shaft fairing was used as a baseline configuration. The M85 is a rotor wing hybrid aircraft design, and the model was tested with the rotor blade in the fixed wing mode. Assessments were made of the aerodynamic characteristics of various model rotor configurations. Variation in configurations were produced by changing the rotor blade sweep angle and the blade chord length. The most favorable M85 configuration tested included wide chord blades at 0 deg sweep, and it attained a system lift to drag ratio of 8.4.

Lance, Michael B.↗
NASA NTRS1990

Icing tests of a model main rotor

A NASA-sponsored consortium conducted an experimental program to investigate the characteristics of a model rotor under icing conditions. This project resulted in the first U.S. test of a heavily instrumented model rotor conducted in the controlled environment of a refrigerated wind tunnel, the NASA Lewis Icing Research Tunnel. The tunnel entry used a powered force model with a 1.83-m-diameter main rotor, with 0.124-m-chord main rotor blades fabricated specially for this experiment. Test conditions included a range of liquid water content and median volume droplet diameters that fell within the FAA and DOD icing envelopes. The test data show the effects of icing on rotor lift, rotor torque, blade loads, and vibration. Ice shapes and ice dimensions were taken, and molds were made of three ice shapes. High-speed movies were taken to document ice shedding. The results have been compared with analytical accretion predictions.

Bond, Thomas H.↗
NASA NTRS1991

A multi-passage three-dimensional Navier-Stokes simulation of turbine rotor-stator interaction

This paper deals with the development and validation of a 3D multipassage Navier-Stokes code for predicting the unsteady effects due to rotor-stator interaction in turbomachines. Prior work in two dimensions has demonstrated the necessity of including multiple rotor and stator passages in order to closely approximate the stator-to-rotor airfoil count ratio and thus accurately predict the unsteady flowfield resulting from rotor-stator interaction. In the present paper, this multipassage capability is extended to three dimensions. Numerical results obtained from a multipassage (three stator and four rotor passage) calculation of an axial turbine stage are presented. The stator-to-rotor airfoil count ratio (3:4) used in the present calculations is a close approximation to that in the actual turbine configuration (22:28). The present multipassage calculation results in a more accurate prediction of the unsteady flowfield than that possible from a single-passage calculation.

Madavan, N. K.↗
NASA NTRS1991

Aerodynamic detuning for aeroelastic control of stability and forced response of supersonic rotors

An unsteady aerodynamic model is developed to analyze flutter and aerodynamically forced response of aerodynamically detuned supersonic axial flow rotors. Alternate blade aerodynamic detuning is considered, accomplished by alternating the circumferential spacing of adjacent blades as small solidity variations which do not have a dominant effect on the steady performance of a rotor. The unsteady aerodynamics are determined by developing an influence coefficient technique which is appropriate for both aerodynamically tuned and detuned rotor configurations. Torsion mode rotor stability and aerodynamically forced response are then analyzed with this unsteady aerodynamic model by combining it with a single-degree-of-freedom structural model. The effects of this detuning on the flutter and forced response characteristics of supersonic axial flow rotors is then demonstrated by considering baseline twelve bladed rotors.

Spara, Karen M.↗