Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

High-pressure crystallography and compression behavior of the alkali-scandium-germanate end-members LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6}

Synthetic single-crystal samples of the monoclinic pyroxene-type compounds LiScGe{sub 2}O{sub 6} and NaScGe{sub 2}O{sub 6} have been investigated by means of in-situ high-pressure Raman spectroscopy and X-ray diffraction techniques. Crystal-structure investigations at hydrostatic high-pressure conditions were carried out in addition to 10{sup −4} GPa measurements using the diamond-anvil cell technique up to ∼9.5 GPa. Both samples, LiScGe{sub 2}O{sub 6} (space group P2{sub 1}/c, a=9.9999(8) Å, b=9.1040(2) Å, c=5.4610(2) Å, β=109.240(2)° at 10{sup −4} GPa) and NaScGe{sub 2}O{sub 6} (space group C2/c, a=10.1678(5) Å, b=9.1583(5) Å, c=5.5672(3) Å, β=107.257(3)° at 10{sup −4} GPa), did not undergo any compression-induced change of symmetry as confirmed by single-crystal diffraction patterns. Series of high-pressure Raman spectra confirm the absence of any symmetry-related structural phase transition with band positions shifting in a smooth fashion on increasing pressure. High-precision lattice parameters, as determined from X-ray diffraction profile analyzes, were used to monitor both the compressibilities of lattice directions and the evolution of the unit-cell volume with pressure. The experimental data was fitted using a third-order Birch–Murnaghan equation-of-state approach and parameterized fits yield V{sub 0}=469.60(11) Å{sup 3}, K{sub 0}=85.6(1.3) GPa and K′=5.9(4) for LiScGe{sub 2}O{sub 6} and V{sub 0}=495.95(19) Å{sup 3}, K{sub 0}=79(3) GPa and K′=3.9(1.1) for NaScGe{sub 2}O{sub 6}. The systematic comparison of volume properties and compression behavior shows that both pyroxene-type compounds follow established trend lines with similar slopes in comparing volumes versus bulk moduli, and confirm that the position of trend lines in this systematics describing variations with M1 critically depend on the type of M2 and T cations, independent on the space-group symmetry. - Graphical abstract: Polyhedral model of the LiScGe{sub 2}O{sub 6} crystal structure at 9.51 GPa. Red and blue: crystallographic distinctive germanium-tetrahedral chains; Green: scandium-octahedral chains; Purple: lithium atoms. - Highlights: • High-quality high-pressure data of previously uninvestigated germanate compounds. • Results confirmed through complementing sXRD with Raman spectroscopy. • Comparison and relation of high-pressure pyroxene-type compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} Molten Slags

In the present work, the relationship between the microscopic structure and macroscopic thermophysical properties in a basic CaO-SiO{sub 2}-MgO-Al{sub 2}O{sub 3} quaternary system was identified using Fourier transformation infrared, Raman and {sup 27}Al magic angular spinning nuclear magnetic resonance (MAS-NMR) techniques. The Raman spectra quantitatively proved that with increasing Al{sub 2}O{sub 3} content, the concentrations of the symmetric units of Q{sup 0}(Si) and Q{sup 2}(Si) decreased, while those of the asymmetric units of Q{sup 1}(Si) and Q{sup 3}(Si) increased; consequently, the degree of polymerization of the networks increased, which resulted in an increase in slag viscosity. The {sup 27}Al MAS-NMR spectra demonstrated that three structural units of Al atoms, namely, AlO{sub 4}, AlO{sub 5}, and AlO{sub 6}, mainly existed in the networks. With increasing Al{sub 2}O{sub 3} content, the concentration of AlO{sub 4} slightly decreased, while those of AlO{sub 5} and AlO{sub 6} increased; overall, Al{sub 2}O{sub 3} acted as a network former in the present system. The increasing Al{sub 2}O{sub 3} content led to additional AlO{sub 6} and Si-NBO-Ca-NBO-Al frameworks, which replaced Si-NBO-Ca-NBO-Si in the networks (NBO: non-bridging oxygen) and induced a change in the primarily precipitated crystalline phase from Ca{sub 2}MgSi{sub 2}O{sub 7} and Ca{sub 2}Al{sub 2}SiO{sub 7} to MgAlO{sub 4}.

36 MATERIALS SCIENCE↗

Bandgap tuning in SrTi(N,O,F){sub 3} by anionic-lattice variation

Polycrystalline SrTiO{sub 3} and SrTi(O,F){sub 3} powders were synthesized by a solid-state reaction. A partial substitution of oxygen by nitrogen was subsequently carried out using thermal ammonolysis resulting in SrTi(N,O){sub 3} and SrTi(N,O,F){sub 3}. Powder X-ray diffraction (XRD) revealed a cubic perovskite structure with space group Pm-3m for all samples. The thermal ammonolysis slightly increased the lattice parameters, crystallite sizes and strain. As a result from the co-substitution of oxygen with nitrogen and fluorine for SrTi(N,O,F){sub 3}, highly distorted TiO{sub 6} octahedra were detected using X-ray absorption near edge structure (XANES) spectroscopy. The weakening of all active modes of the Raman spectra after thermal ammonolysis also indicated enhanced distortions in the local crystal structure. SrTi(N,O,F){sub 3} has the largest amount of nitrogen as well as fluorine among all four samples as determined by thermogravimetric analysis (TGA), elemental analysis and X-ray photoelectron spectroscopy (XPS). In the UV–vis spectra a distinctive shift of the absorption-edge energy was observed exclusively for the SrTi(N,O,F){sub 3} sample from 390 to 510 nm corresponding to a bandgap narrowing from 3.18 to 2.43 eV. - Graphical abstract: Figure shows the shift of the absorption-edge energy for the SrTi(N,O,F){sub 3} sample from 390 to 510 nm corresponding to a bandgap narrowing from 3.18 to 2.43 eV. Display Omitted - Highlights: • Synthesis of phase-pure SrTi(N,O,F){sub 3} via solid-state reaction. • The incorporated nitrogen contents increase by the presence of fluorine in SrTi(N,O,F){sub 3}. • Co-substitution with nitrogen and fluorine is beneficial for the bandgap narrowing compared to by only nitrogen or fluorine substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inhibition of Polyimide Photodegradation by Incorporation of Titanate Nanotubes into a Composite

The effect of UV light exposure on the properties of hexafluoroisopropylidene-diphthalic anhydride–oxydianiline (6FDA–ODA) polyimide (PI) and polyimide–titanate nanotube (TiNT/PI) composites has been studied using Raman spectroscopy, optical microscopy, nanoidentation and TEM. The degree of polymer photodegradation was estimated by measuring the change in affinity to a positively charged dye (methylene blue, MB). The mechanism of photoassisted transformations in polyimides usually involves scission of polymer chains accompanied by appearance of active radicals, which undergo further rapid transformations to more stable phenol, amine, and carboxylic functional groups. The accumulation of these groups can increase the degree of adsorption of charged dyes in the photodegraded polymer. It was found that neat PI showed a significantly increased capacity to adsorb MB after irradiation with UV, reaching a plateau after 1 h. In contrast, TiNT/PI composite demonstrated a much slower rise in concentration of adsorbed MB even after 4 h of UV exposure. Raman spectra indicated cleavage of C=O and C–F bonds in PI while only the C–F bond was damaged in TiNT/PI. Shorter cracks (≈ 40 µm long) appeared in TiNT/PI composites whereas macro cracks (> 100 µm) were visible in neat PI after 3 h of UV exposure. Brittleness was studied by comparing plasticity index which varied from 0 to 1 (0 corresponding to the most brittle material and 1 the most ductile one). Plasticity index reduced by 51% and 2% for PI and TiNT/PI, respectively after 3 h UV irradiation, indicating that TiNT can protect underlying PI from further damage. The hardness of neat PI decreased whereas, for TiNT/PI, it increased under UV, suggesting crosslinking of broken polymer chains with nanotubes. Graphical Abstract: Photodegradation of a titanate nanotubes/polyimide composite can lead to cross-linking of broken polymer chains by nanostructured material, resulting in increased hardness. .

36 MATERIALS SCIENCE↗

Investigation of Silica-Supported Vanadium Oxide Catalysts by High-Field 51 V Magic-Angle Spinning NMR

Supported V2O5/SiO2 catalysts were studied using solid state 51V MAS NMR at a sample spinning rate of 36 kHz and at a magnetic field of 19.975 T for a better understanding of the coordination of the vanadium oxide as a function of environmental conditions . Structural transformations of the supported vanadium oxide species between the catalyst in the dehydrated state and hydrated state under an ambient environment were revisited to examine the degree of oligomerization and the effect of water. The experimental results indicate the existence of a single dehydrated surface vanadium oxide species that resonates at -675 ppm and two vanadium oxide species under ambient conditions that resonate at -566 and -610 ppm, respectively. No detectable structural difference was found as a function of vanadium oxide loading on SiO2 (3% V2O5/SiO2 and 8% V2O5/SiO2). Quantum chemistry simulations of the 51V NMR chemical shifts on predicted surface structures were used as an aide in understanding potential surface vanadium oxide species on the silica support. The results suggest the formation of isolated surface VO4 units for the dehydrated catalysts with the possibility of dimer and cyclic trimer presence. The absence of bridging V-O-V vibrations (~200-300 cm-1) in the Raman spectra [Gao et al. J. Phys. Chem. B 1998, 102, 10842-10852], however, indicates that the isolated surface VO4 sites are the dominant dehydrated surface vanadia species on silica. Upon exposure to water, hydrolysis of the bridging V-O-Si bonds is most likely responsible for the decreased electron shielding experienced by vanadium. No indicators for the presence of hydrated decavanadate clusters or hydrated vanadia gels previously proposed in the literature were detected in this study.

Environmental Molecular Sciences Laboratory↗

A comparative study of SrO and BaO doping to CeO{sub 2}-ZrO{sub 2}: Characteristic and its catalytic performance for three-way catalysts

Graphical abstract: Display Omitted Highlights: ► The prepared materials have a face-centered cubic structure and nanosize particles. ►Comparing to CZB, aged CZS has 494 μmol/g of OSC and 30 m{sup 2}/g of surface area. ► CZS and CZB have similar NO sorption and reductive properties and different H{sub 2} uptake. ► T{sub 50} of Pt-Rh/CZS/LA is as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}. ► Pt-Rh/CZS/LA has wider working-window at 320 °C under different λ value. -- Abstract: Ceria-zirconia-strontia (Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9}) and ceria-zirconia-baria (Ce{sub 0.35}Zr{sub 0.55}Ba{sub 0.10}O{sub 1.9}) were synthesized using an oxidation-co-precipitation method with hydrogen peroxide (H{sub 2}O{sub 2}) as oxidant. The physical and chemical properties of the prepared materials were investigated using Brunauer–Emmett–Teller surface area characterization, transmission electron microscopy, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, and oxygen pulse reaction. The prepared materials were used in preparing three-way catalysts with low Pt and Rh content. Moreover, catalytic activities were evaluated at a fixed bed under a simulated gaseous mixture. The results are as follows: (1) the prepared materials have a face-centered cubic structure and are nano-sized; (2) aged Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9} has higher oxygen storage capacity (494 μmol/g), better thermal stability (30 m{sup 2}/g), good low-temperature reducibility, and high hydrogen uptake after TPR-redox cycles; (3) the light-off temperature (T{sub 50}) of Pt-Rh/CZS/LA can be as low as 199 °C for CO, 228 °C for NO, and 252 °C for C{sub 3}H{sub 8}; and (4) Pt-Rh/CZS/LA has a fairly wide working-window.

36 MATERIALS SCIENCE↗

Study of structural and ferromagnetic resonance properties of spinel lithium ferrite (LiFe{sub 5}O{sub 8}) single crystals

The effect of B-site cation ordering on the room temperature structural and ferromagnetic resonance (FMR) properties of single crystal spinel lithium ferrite (LiFe{sub 5}O{sub 8}, LFO) have been investigated. A detailed microstructural analysis is done through X-ray diffraction, polarized Raman spectroscopy, and transmission electron microscopy (TEM) to examine the effect of post-annealing on the B-site cation ordering. The X-ray diffraction pattern of the as-grown crystal indicates a disordered state of the crystal. However, the annealed sample shows additional superlattice reflections corresponding to the ordered phase. This ordering is further confirmed by Raman spectra and TEM images, which reveal ordering of Li and Fe ions at the octahedral sites contrasting with the relatively high degree of octahedral site disorder in the as-grown crystal. To study the effect of B-site ordering on the magnetic properties and FMR linewidth, vibrating sample magnetometry and broadband FMR measurements have been performed for both the ordered and disordered phases of lithium ferrite. The value of saturation magnetization for both phases is ∼290 emu/cm{sup 3}. A single mode FMR profile is observed for both phases with little distortion. The linewidth characteristics of the ordered and disordered phases of lithium ferrite phases are compared, and it is observed that the linewidth is independent of the cation ordering. Both the phases exhibit a low linewidth (∼26 Oe at 30 GHz) and the effective damping parameter for the as-grown and annealed samples is determined to be 0.0021 ± 0.0001.

36 MATERIALS SCIENCE↗

Marked Consequences of Systematic Oligothiophene Catenation in Thieno[3,4- c ]pyrrole-4,6-dione and Bithiopheneimide Photovoltaic Copolymers

As effective building blocks for high-mobility transistor polymers, oligothiophenes are receiving attention for polymer solar cells (PSCs) because the resulting polymers can effectively suppress charge recombination. In this work we investigate two series of in-chain donor–acceptor copolymers, PTPDnT and PBTInT, based on thieno[3,4-c]pyrrole-4,6-dione (TPD) or bithiopheneimide (BTI) as electron acceptor units, respectively, and oligothiophenes (nTs) as donor counits, for high-performance PSCs. Intramolecular S···O interaction leads to more planar TPD polymer backbones, however backbone torsion yields greater open-circuit voltages for BTI polymers. Thiophene addition progressively raises polymer HOMOs but marginally affects their band gaps. FT-Raman spectra indicate that PTPDnT and PBTInT conjugation lengths scale with nT catenation up to $n$ = 3 and then saturate for longer oligomer. Furthermore, the effects of oligothiophene alkylation position are explored, revealing that the alkylation pattern greatly affects film morphology and PSC performance. The 3T with “outward” alkylation in PTPD3T and PBTI3T affords optimal $π$-conjugation, close stacking, long-range order, and high hole mobilities (0.1 cm 2 /(V s)). These characteristics contribute to the exceptional ~80% fill factors for PTPD3T-based PSCs with PCE = 7.7%. The results demonstrate that 3T is the optimal donor unit among nTs ($n$ = 1–4) for photovoltaic polymers. Grazing incidence wide-angle X-ray scattering, transmission electron microscopy, and time-resolved microwave conductivity measurements reveal that the terthiophene-based PTPD3T blend maintains high crystallinity with appreciable local mobility and long charge carrier lifetime. These results provide fundamental materials structure-device performance correlations and suggest guidelines for designing oligothiophene-based polymers with optimal thiophene catenation and appropriate alkylation pattern to maximize PSC performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, vibrational and luminescence properties of the (1−x)CaWO{sub 4}−xCdWO{sub 4} system

In the present work, we investigate the structural, microstructural, vibrational and luminescence properties of the system (1−x)CaWO{sub 4}−xCdWO{sub 4} with x ranging between 0 and 1. Polycrystalline samples were elaborated using a coprecipitation technique followed by thermal treatment at 1000 °C. The samples were then characterized using X-ray diffraction, scanning electron microscopy, Raman spectroscopy and luminescence analyses. X-ray diffraction profile analyses using Rietveld method showed that two kinds of solid solutions Ca{sub 1−x}Cd{sub x}WO{sub 4} having scheelite and wolframite structures, with respectively tetragonal and monoclinic crystal cells, were observed, with a biphasic system for compositions x=0.6 and 0.7. The scanning electron microscopy experiments showed a complex evolution of morphologies and crystallite sizes as x increased. The vibration modes of Raman spectra were characteristic of composition-dependent disordered solid solutions with decreasing wavenumbers as x increased. Luminescence experiments were performed under UV-laser light irradiation. The energies of emission bands increased linearly with cadmium composition x. The integrated intensity of luminescence reached a maximum value for the substituted wolframite phase with composition x=0.8. - Graphical abstract: Luminescence on UV excitation (364.5 nm) of (1−x)CaWO{sub 4−x}CdWO{sub 4} system, elaborated from coprecipitation technique at 1000 °C, with 0<x<1. (a) Experimental emission bands of the Ca{sub 1−x}Cd{sub x}WO{sub 4} polycrystalline phases with 0≤x≤0.5. (b) Maximum of luminescence intensity for the composition x=0.8. - Highlights: • Solid solutions Ca{sub 1−x}Cd{sub x}WO{sub 4} are elaborated from coprecipitation technique. • The structures of two types of solid solutions are refined using Rietveld method. • A maximum of luminescence is obtained for an intermediate composition x=0.8.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanosynthesis and structural characterization of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} (x=0.1–0.35) solid solutions

A series of nanostructured fluorite-type Ce{sub 1–x}Y{sub x}O{sub 2–δ} (0≤x≤0.35) solid solutions, prepared via high-energy milling of the CeO{sub 2}/Y{sub 2}O{sub 3} mixtures, are investigated by XRD, HR-TEM, EDS and Raman spectroscopy. For the first time, complementary information on both the long-range and short-range structural features of mechanosynthesized Ce{sub 1–x}Y{sub x}O{sub 2–δ}, obtained by Rietveld analysis of XRD data and Raman spectroscopy, is provided. The lattice parameters of the as-prepared solid solutions decrease with increasing yttrium content. Rietveld refinements of the XRD data reveal increase in microstrains in the host ceria lattice as a consequence of yttrium incorporation. Raman spectra are directly affected by the presence of oxygen vacancies; their existence is evidenced by the presence of vibration modes at ~560 and ~600 cm{sup –1}. The detailed spectroscopic investigations enable us to separate extrinsic and intrinsic origin of oxygen vacancies. It is demonstrated that mechanosynthesis can be successfully employed in the one-step preparation of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} solid solutions. - Graphical abstract: Mechanosynthesis of nanocrystalline Ce{sub 1–x}Y{sub x}O{sub 2–δ} (x=0.1–0.35) solid solutions. - Highlights: • One-step mechanosynthesis of nanoscale Ce{sub 1–x}Y{sub x}O{sub 2–δ} (0≤x≤0.35) solid solutions. • Complementary information on the long-range and short-range structural features of mechanosynthesized Ce{sub 1–x}Y{sub x}O{sub 2–δ} is provided. • Structural variations as a response to the yttrium doping. • Separation of extrinsic and intrinsic origin of the induced oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of RF sputtered cadmium telluride (CdTe) thin films: Influence of deposition pressure

Influence of deposition pressure on structural, morphology, electrical and optical properties of CdTe thin films deposited at low substrate temperature (100°C) by RF magnetron sputtering was investigated. The formation of CdTe was confirmed by low angle XRD and Raman spectroscopy. The low angle XRD analysis revealed that the CdTe films have zinc blende (cubic) structure with crystallites having preferred orientation in (111) direction. Raman spectra show the longitudinal optical (LO) phonon mode peak ∼ 165.4 cm{sup -1} suggesting high quality CdTe film were obtained over the entire range of deposition pressure studied. Scanning electron microscopy analysis showed that films are smooth, homogenous, and crack-free with no evidence of voids. The EDAX data revealed that CdTe films deposited at low deposition pressure are high-quality stoichiometric. However, for all deposition pressures, films are rich in Cd relative to Te. The UV-Visible spectroscopy analysis show the blue shift in absorption edge with increasing the deposition pressure while the band gap show decreasing trend. The highest electrical conductivity was obtained for the film deposited at deposition pressure 1 Pa which indicates that the optimized deposition pressure for our sputtering unit is 1 Pa. Based on the experimental results, these CdTe films can be useful for the application in the flexible solar cells and other opto-electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transition, crystal water and low thermal expansion behavior of Al{sub 2−2x}(ZrMg){sub x}W{sub 3}O{sub 12}·n(H{sub 2}O)

Al{sub 2−2x}(ZrMg){sub x}W{sub 3}O{sub 12} for 0≤x≤1.0 are synthesized to reduce the phase transition temperature of Al{sub 2}W{sub 3}O{sub 12}. It is found that the incorporation of (ZrMg){sup 6+} into the lattice of Al{sub 2}W{sub 3}O{sub 12} not only reduces its orthorhombic-to-monoclinic phase transition temperature but also elevates its softening temperature, broadening its applicable temperature range considerably. Al{sub 2−2x}(ZrMg){sub x}W{sub 3}O{sub 12} with x<0.5 exhibit low coefficients of thermal expansion (CTEs) and non-hygroscopicity, while those for x≥0.7 are obviously hygroscopic and the CETs decrease with increasing the content of (ZrMg){sup 6+} so that Al{sub 0.2}(ZrMg){sub 0.9}W{sub 3}O{sub 12} and ZrMgW{sub 3}O{sub 12} exhibit negative thermal expansion. Temperature-dependent Raman spectroscopic study shows the hardening of W–O bonds above 373 K which is attributed to the release of crystal water. The effect of crystal water on the thermal expansion property is discussed based on the hydrogen bond between H in crystal water and electronegative O in Al(ZrMg)–O–W linkages. - Graphical abstract: (a and b) Temperature dependent Raman spectra of Al{sub 2−x}(ZrMg){sub x}W{sub 3}O{sub 12} (x=0.1, 0.2), (c and d) Building block of a unit cell of Al{sub 2−x}(ZrMg){sub x}W{sub 3}O{sub 12}·n(H{sub 2}O) and schematic showing the effect of crystal water on Al(Zr, Mg)–O–W linkages. - Highlights: • (ZrMg){sup 6+} reduces orthorhombic-to-monoclinic phase transition of Al{sub 2}W{sub 3}O{sub 12}. • The incorporation of (ZrMg){sup 6+} elevates the softening temperature of Al{sub 2}W{sub 3}O{sub 12}. • Al{sub 2−2x}(ZrMg){sub x}W{sub 3}O{sub 12} (x<0.5) exhibit low CTEs and non-hygroscopicity. • Al{sub 0.2}(ZrMg){sub 0.9}W{sub 3}O{sub 12}·0.8H{sub 2}O and ZrMgW{sub 3}O{sub 12}·2H{sub 2}O present NTE. • Hydrogen bond between H in H{sub 2}O and O in Al(ZrMg)–O–W affects thermal expansion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature induced phase transition of CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3} phosphate

In this work we investigated the structural behaviour of a CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3}. Due to the presence of divalent Mn{sup 2+} cations this compound can possess interesting luminescence properties. It was recently understood that this phosphate undergoes a temperature induced irreversible phase transition in the range of 800–875 °C. It has also been shown that the 3d–3d luminescence of Mn{sup 2+} increases 10 fold for the high temperature polymorph. To determine the Mn environment structural investigations of both phases have been performed by the X-ray powder diffraction and Raman spectroscopy methods. The low temperature modification adopts the trigonal NZP structure type with a slightly lower symmetry (space group R32, a=8.7850(2) Å, c=22.6496(7) Å, V=1514.8(1) Å{sup 3}). The high temperature form in turn has orthorhombic symmetry (space group Pnma, a=6.2350(3) Å, b=6.6281(3) Å, c=14.4731(6) Å, V=598.13(5) Å{sup 3}). Both structures were solved ab-initio from powder data and structural analysis was performed. In-situ and RT Raman spectra are consistent with the XRD derived structural model. Mn{sup 2+} cations occupy different types of positions in these structures and a change in Mn coordination number (6 for LT phase, 7 for HT phase) results in different Mn–O bond lengths. These differences may explain the change in the optical properties between the polymorphs. - Graphical abstract: The compound CaMn{sub 0.5}Zr{sub 1.5}(PO{sub 4}){sub 3} was synthesized in order to create a material with enhanced luminescent properties. The goal of present studies is to define Mn{sup 2+} environment and its changes due to the structural transformations of the phosphate along phase transition at the T range of 800–875 °C. It was found that LT modification adopts the trigonal NZP structure type, sp.gr. R32, the HT form in turn exhibits orthorhombic symmetry sp.gr. Pnma. Mn2+ cations occupy different types of positions in those structures and a change in coordination number of Mn (6 for LT phase, 7 for HT phase) results in a change in Mn–O bond lengths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural dynamics of phenylisothiocyanate in the light-absorbing excited states: Resonance Raman and complete active space self-consistent field calculation study

The excited state structural dynamics of phenyl isothiocyanate (PITC) after excitation to the light absorbing S{sub 2}(A′), S{sub 6}(A′), and S{sub 7}(A′) excited states were studied by using the resonance Raman spectroscopy and complete active space self-consistent field method calculations. The UV absorption bands of PITC were assigned. The vibrational assignments were done on the basis of the Fourier transform (FT)-Raman and FT-infrared measurements, the density-functional theory computations, and the normal mode analysis. The A-, B-, and C-bands resonance Raman spectra in cyclohexane, acetonitrile, and methanol solvents were, respectively, obtained at 299.1, 282.4, 266.0, 252.7, 228.7, 217.8, and 208.8 nm excitation wavelengths to probe the corresponding structural dynamics of PITC. The results indicated that the structural dynamics in the S{sub 2}(A′), S{sub 6}(A′), and S{sub 7}(A′) excited states were very different. The conical intersection point CI(S{sub 2}/S{sub 1}) were predicted to play important role in the low-lying excited state decay dynamics. Two major decay channels were predicted for PITC upon excitation to the S{sub 2}(A′) state: the radiative S{sub 2,min} → S{sub 0} transition and the nonradiative S{sub 2} → S{sub 1} internal conversion via CI(S{sub 2}/S{sub 1}). The differences in the decay dynamics between methyl isothiocyanate and PITC in the first light absorbing excited state were discussed. The role of the intersystem crossing point ISC(S{sub 1}/T{sub 1}) in the excited state decay dynamics of PITC is evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Glass structure and crystallization in boro-alumino-silicate glasses containing rare earth and transition metal cations: a US-UK collaborative program

Nuclear wastes generated from reprocessing of used nuclear fuel tend to contain a large fraction of rare earth (RE, e.g., Nd3+), transition (TM, e.g., Mo6+, Zr4+), alkali (A, e.g., Cs+), and alkaline earth cations (AE, e.g., Ba2+, Sr2+). Various strategies have been considered for immobilizing such waste streams, varying from nominally crystal-free glass to glass-ceramic to multi-phase ceramic waste forms. For glass and glass-ceramic waste forms, the added glass-forming system is generally alkali-alkaline earth-aluminoborosilicate (i.e., Na-Ca-Al-B-Si oxide). In a US-UK collaborative project, summarized here, we investigated the glass structure and crystallization dependence on compositional changes in simulated nuclear waste glasses and glass-ceramics. Compositions ranged in complexity from five – to – eight oxides. Specifically, the roles of Mo and rare earths are investigated, since a proposed glass-ceramic waste form contains crystalline phases such as powellite [(AE,A,RE)MoO4] and oxyapatite [(RE,AE,A)10Si6O26], and the precipitation of molybdenum phases is known to be affected by the rare earth concentration in the glass. Additionally, the effects of other chemical additions have been systematically investigated, including Zr, Ru, P, and Ti. A series of studies were also undertaken to ascertain the effect of the RE size on glass structure and on partitioning to crystal phases, investigating similarities and differences in glasses containing single RE oxides of Sc, Y, La, Ce, Nd, Sm, Er, Yb, or Lu. Finally, the effect of charge compensation was investigated by considering not only the commonly assessed peralkaline glass but also metaluminous and peraluminous compositions. Glass structure and crystallization studies were conducted by spectroscopic methods (i.e., Raman, X-ray absorption, nuclear magnetic resonance (NMR), optical absorption, photoluminescence, photoluminescence excitation, X-ray photoelectron spectroscopy), microscopy (i.e., scanning electron microscopy, transmission electron microscopy, electron probe microanalysis), scattering (i.e., X-ray and neutron diffraction, small angle measurements), and physical characterization (i.e., differential thermal analysis, liquidus, viscosity, density). This paper will give an overview of the research program and some example unpublished results on glass-ceramic crystallization kinetics, microstructure, and Raman spectra, as well as some examples of the effects of rare earths on the absorption, luminescence, and NMR spectra of starting glasses. The formal collaboration described here has resulted in the generation of a large number of results, some of which are still in the process of being published as separate studies.

McCloy, John S.↗

In-situ photo-reduction of silver particles and their SPR effect in enhancing the photocatalytic water splitting of Ag{sub 2}O/TiO{sub 2} photocatalysts under solar light irradiation: A case study

Highlights: • Visible light induced SPR bands confirmed the Plasmonic resonance behaviour of Ag. • Appreciable band gap reduction of TiO{sub 2} due to in-situ photoreduction of Ag{sub 2}O to Ag. • H{sub 2}-TPR emphasized the strong interaction between Ag and TiO{sub 2}. • Ag/TiO{sub 2} witnessed 76.6 folds improved H{sub 2} production rate than P25-TiO{sub 2}. - Abstract: Plasmonic Ag{sub 2}O/TiO{sub 2} photocatalysts were synthesized by impregnating silver oxide nano clusters over the surface of TiO{sub 2}. It is found that the in-situ photo reduced silver particles showed visible light absorption in a wide range of wavelength 400–800 nm due to localized surface plasmon resonance. The in-situ formed metallic silver transfer electrons to the TiO{sub 2} through SPR excitation and thus improving photocatalytic hydrogen production. The SPR behavior of silver particles on TiO{sub 2} was characterized by UV–vis diffuse reflectance spectroscopy and the X-ray photoelectron spectroscopy confirms the metallic silver. X-ray diffraction and transmission electron microscopy confirm the crystallinity of the prepared samples. H{sub 2}-temperature-programmed reduction, photoluminescence, electron paramagnetic resonance, infrared spectroscopy, BET-surface area and Raman spectra were used to understand the morphological and chemical nature of the catalysts. Among the samples, 1 wt% Ag/TiO{sub 2} showed the best activity ca. ∼23 mmol g{sup −1} in presence of glycerol scavenger.

36 MATERIALS SCIENCE↗

Investigation of super-capacitive nature of reduced graphene oxide nano mesh grown over 18 k gold foil using wings of Parides iphidamas as biological template

Highlights: • Novel rGO nano mesh (rGONM) like assembly was fabricated using bio-template method. • rGONM pattern exhibit nano-ridges (40 nm) and ribs (25 nm) resembling fishing net. • Super-capacitor performances of rGO and rGONM coated Au substrates were evaluated. • rGO-Au and rGONM-Au revealed specific capacitances of 291 and 418 F/g respectively. - Abstract: This paper deals with the fabrication of novel, reduced graphene oxide nano mesh (rGONM) patterns with longitudinal nano-ridges and transverse nano-ribs using nano tubular structures found on the scales of Parides iphidamas, a butterfly species as biological template. Raman spectra, EDAX and FTIR results confirm the obtained mesh-like morphology that comprises only reduced graphene oxide (rGO). Further, super-capacitor performances of rGO and rGONM-coated gold substrates have been evaluated using cyclic-voltammetry (CV), galvanostatic charge-discharge cycle (GCD) and electrochemical impedance spectroscopic (EIS) analysis. A characteristic rectangular curve obtained from the CV of rGO and rGONM-coated gold electrodes display specific capacitances of 291 F/g and 418 F/g respectively at a scan rate of 5 mV/s. The results obtained from EIS support the superior nature of rGONM-coated electrode against rGO system, suggesting the use of rGONM-Au as a potential candidate for electrochemical super capacitor applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced photoluminescence of SrWO{sub 4}:Eu{sup 3+} red phosphor synthesized by mechanochemically assisted solid state metathesis reaction method at room temperature

Optically efficient europium activated alkaline earth metal tungstate nano phosphor (SrWO{sub 4}) with different doping concentrations have been synthesized by mechanochemically assisted solid state metathesis reaction at room temperature for the first time. The XRD and Raman spectra results indicated that the prepared powders exhibit a scheelite-type tetragonal structure. FTIR spectra exhibited a high absorption band situated at around 854 cm{sup −1}, which was ascribed to the W–O antisymmetric stretching vibrations into the [WO{sub 4}]{sup 2−} tetrahedron groups. Analysis of the emission spectra with different Eu{sup 3+} concentrations revealed that the optimum dopant concentration for SrWO{sub 4}: x Eu{sup 3+} phosphor is about 8 mol% of Eu{sup 3+}.The red emission intensity of the SSM prepared SrWO{sub 4}: 0.08Eu{sup 3+} phosphors are 2 times greater than that of the commercial Y{sub 2}O{sub 2}S: Eu{sup 3+} red phosphor prepared by the conventional solid state reaction method. All the results indicate that the phosphor is a promising red phosphor pumped by NUV InGaN chip for fabricating WLED.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗