Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Physical quantities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Higher Flux from the Young Sun as an Explanation for Warm Temperatures for Early Earth and Mars

Observations indicate that the Earth was at least warm enough for liquid water to exist as far back as 4 Gyr ago, namely, as early as half a billion years after the formation of the Earth; in fact, there is evidence suggesting that Earth may have been even warmer then than it is now. These relatively warm temperatures required on early Earth are in apparent contradiction to the dimness of the early Sun predicted by the standard solar models. This problem has generally been explained by assuming that Earth's early atmosphere contained huge amounts of carbon dioxide (CO2), resulting in a large enough greenhouse effect to counteract the effect of a dimmer Sun. However, recent work places an upper limit of 0.04 bar on the partial pressure of CO2 in the period from 2.75 to 2.2 Gyr ago, based on the absence of siderite in paleosols; this casts doubt on the viability of a strong CO2 greenhouse effect on early Earth. The existence of liquid water on early Mars has been even more of a puzzle; even the maximum possible CO2 greenhouse effect cannot yield warm enough Martian surface temperatures. These problems can be resolved simultaneously for both Earth and Mars, if the early Sun was brighter than predicted by the standard solar models. This could be accomplished if the early Sun was slightly more massive than it is now, i.e., if the solar wind was considerably stronger in the past than at present. A slightly more massive young Sun would have left fingerprints on the internal structure of the present Sun. Today, helioseismic observations exist that can measure the internal structure of the Sun with very high precision. The task undertaken here was to compute solar models with the highest precision possible at this time, starting with slightly greater initial masses. These were evolved to the present solar age, where comparisons with the helioseismic observations could be made. Our computations also yielded the time evolution of the solar flux at the planets - a key input to the climates of early Earth and Mars. Early solar mass loss is not the only influence that can alter the internal structure of the present Sun. There are minor uncertainties in the physics of the solar models and in the key observed solar parameters that also affect the present Sun's internal structure. It was therefore imperative to obtain an understanding of the effects of these other uncertainties, in order to disentangle them from the fingerprints that might be left by early solar mass loss. From these considerations, our work was divided into two parts: (1) We first computed the evolution of standard solar models with input parameters varied within their uncertainties, to determine their effect on the observable helioseismic quantities; (2) We then computed non-standard solar models with higher initial masses to test against the helioseismological observations.

Sackmann, I.-Juliana↗

Cross-Measurement Comparisons for a CFD Validation Dataset on Mach 2.5 Axisymmetric Turbulent Shock-Wave/Boundary-Layer Interactions

Experimental data for a shock-wave/boundary-layer interaction has been collected using multiple measurement techniques. Unfortunately, diversity of methods for acquisition begets an aggregation of data which does not directly quantify the same properties of the flowfield. The objective in this paper was to (a) present the collection of flowfield measurements in one venue in a format more usable for those validating CFD models against the data, (b) evaluate the degree to which the experimental data support each other, and (c) highlight the differences and relative advantages/shortcomings of each measurement techniques. To present the various measured quantities into common format, CFD results from a companion paper also submitted for presentation at this meeting are utilized. For the case where the boundary layer remains attached, there is agreement between the various measurements as well as with Reynolds-averaged Navier-Stokes simulation solutions. As the impinging shock strength is increased beyond the point of separating the boundary layer, the congruity of the data wanes. Generally, agreement among the measurements exceeds the degree to which the CFD solutions agree with experiments. This suggests that unmodeled physical phenomena, such as transient motion of the reflected shock and separation bubble, give rise to the discrepancies observed in the computational results.

Shock-wave Boundary-layer interaction↗

On sound radiation from the trailing edge of an isolated airfoil in a uniform flow

An experimental investigation has been conducted to determine the physical process of the noise production from the trailing edge of an isolated two-dimensional airfoil embedded in a low turbulence uniform mean flow. The Reynolds number of the airfoil based on chord was greater than 1,000,000 and that the boundary layer was fully turbulent at the trailing edge. Smoke injection technique and spark shadowgraphy were used to study the structural features of the boundary layer. Two point joint statistical analyses were made on the surface pressure, the radiated sound and the relationship between the two quantities. Operating conditions included two free stream velocities and two angles of attack for both a naturally developed and an artificially tripped boundary layer. Flow visualizations revealed the existence of large scale coherent motions in the outer region of the boundary layer. The observed coherent motions had scales of the order of boundary layer thickness and a convection velocity near the free stream velocity. The production process of the airfoil trailing edge noise was determined to be the convection of the large scale coherent eddies over the trailing edge of the airfoil. The noise field so generated was found to be rather coherent and dipole-like.

Yu, J. C.↗

Toward a CFD nose-to-tail capability - Hypersonic unsteady Navier-Stokes code validation

Computational fluid dynamics (CFD) research for hypersonic flows presents new problems in code validation because of the added complexity of the physical models. This paper surveys code validation procedures applicable to hypersonic flow models that include real gas effects. The current status of hypersonic CFD flow analysis is assessed with the Compressible Navier-Stokes (CNS) code as a case study. The methods of code validation discussed to beyond comparison with experimental data to include comparisons with other codes and formulations, component analyses, and estimation of numerical errors. Current results indicate that predicting hypersonic flows of perfect gases and equilibrium air are well in hand. Pressure, shock location, and integrated quantities are relatively easy to predict accurately, while surface quantities such as heat transfer are more sensitive to the solution procedure. Modeling transition to turbulence needs refinement, though preliminary results are promising.

Edwards, Thomas A.↗

Space tug thermal control equipment thermal requirements, characteristics and constraints catalogue

The Space Tug Thermal Control Study contained two tasks associated with the cataloging of equipment thermal requirements, physical characteristics and constraints. In satisfaction of these tasks a Data Bank program was developed to provide a means of standardizing the method of cataloging while using the computer to handle the data and format the data into the desired catalogues. During the course of the study 109 components were catalogued and included in the Data Bank. A standardized method was selected for describing each component. Each subsystem of the Avionics System is described on a subsystem header page which describes the types of components included within the subsystem, the quantity requirements, target weights, target power and relative comments. The individual components listed within each subsystem are not necessarily a complete list of candidate items but do represent several of the presently available components for consideration in a Tug application.

Ward, T. L.↗

High-beta turbulence in two-dimensional magnetohydrodynamics

Equations of ideal magnetohydrodynamics are used to study incompressible turbulent flows in a specified geometry where all the field quantities vary with only two spatial dimensions. The procedures adopted are basically those of Kraichnan (1967), in which classical equilibrium ensembles are built around constants of the motion identified from the Fourier-transformed equations of motion. Once the constants of the motion are identified, the statistical formulation of the problem is presented in a phase space whose coordinates are the real and imaginary parts of the Fourier coefficients. Canonical ensembles are constructed in this phase space by classical arguments. The theory developed permits isolation of some qualitatively new gross physical effects which have so far not been calculated. One of the more novel physical effects is the appearance of macroscopic structures involving long-wavelength, self-generated, magnetic fields for a wide range of initial parameters.

Fyfe, D.↗

DSMC calculations for the double ellipse

The direct simulation Monte Carlo (DSMC) method involves the simultaneous computation of the trajectories of thousands of simulated molecules in simulated physical space. Rarefied flow about the double ellipse for test case 6.4.1 has been calculated with the DSMC method of Bird. The gas is assumed to be nonreacting nitrogen flowing at a 30 degree incidence with respect to the body axis, and for the surface boundary conditions, the wall is assumed to be diffuse with full thermal accommodation and at a constant wall temperature of 620 K. A parametric study is presented that considers the effect of variations of computational domain, gas model, cell size, and freestream density on surface quantities.

Moss, James N.↗

Global Patterns of Lightning Properties Derived by OTD and LIS

The satellite instruments Optical Transient Detector (OTD) and Lightning Imaging Sensor (LIS) provide unique empirical data about the frequency of lightning flashes around the globe (OTD), and the tropics (LIS), which 5 has been used before to compile a well received global climatology of flash rate densities. Here we present a statistical analysis of various additional lightning properties derived from OTD/LIS, i.e. the number of so-called "events" and "groups" per flash, as well as 10 the mean flash duration, footprint and radiance. These normalized quantities, which can be associated with the flash "strength", show consistent spatial patterns; most strikingly, oceanic flashes show higher values than continental flashes for all properties. Over land, regions with high (Eastern US) 15 and low (India) flash strength can be clearly identified. We discuss possible causes and implications of the observed regional differences. Although a direct quantitative interpretation of the investigated flash properties is difficult, the observed spatial patterns provide valuable information for the 20 interpretation and application of climatological flash rates. Due to the systematic regional variations of physical flash characteristics, viewing conditions, and/or measurement sensitivities, parametrisations of lightning NOx based on total flash rate densities alone are probably affected by regional biases.

Beirle, Steffen↗

I/O Parallelization for the Goddard Earth Observing System Data Assimilation System (GEOS DAS)

The National Aeronautics and Space Administration (NASA) Data Assimilation Office (DAO) at the Goddard Space Flight Center (GSFC) has developed the GEOS DAS, a data assimilation system that provides production support for NASA missions and will support NASA's Earth Observing System (EOS) in the coming years. The GEOS DAS will be used to provide background fields of meteorological quantities to EOS satellite instrument teams for use in their data algorithms as well as providing assimilated data sets for climate studies on decadal time scales. The DAO has been involved in prototyping parallel implementations of the GEOS DAS for a number of years and is now embarking on an effort to convert the production version from shared-memory parallelism to distributed-memory parallelism using the portable Message-Passing Interface (MPI). The GEOS DAS consists of two main components, an atmospheric General Circulation Model (GCM) and a Physical-space Statistical Analysis System (PSAS). The GCM operates on data that are stored on a regular grid while PSAS works with observational data that are scattered irregularly throughout the atmosphere. As a result, the two components have different data decompositions. The GCM is decomposed horizontally as a checkerboard with all vertical levels of each box existing on the same processing element(PE). The dynamical core of the GCM can also operate on a rotated grid, which requires communication-intensive grid transformations during GCM integration. PSAS groups observations on PEs in a more irregular and dynamic fashion.

Lucchesi, Rob↗

About the Effect of Control on Flutter and Post-Flutter of a Supersonic/Hypersonic Cross-Sectional Wing

The control of the flutter instability and the conversion of the dangerous character of the flutter instability boundary into the undangerous one of a cross-sectional wing in a supersonic/hypersonic flow field is presented. The objective of this paper is twofold: i) to analyze the implications of nonlinear unsteady aerodynamics and physical nonlinearities on the character of the instability boundary in the presence of a control capability, and ii) to outline the effects played in the same respect by some important parameters of the aeroelastic system. As a by-product of this analysis, the implications of the active control on the linearized flutter behavior of the system are captured and emphasized. The bifurcation behavior of the open/closed loop aeroelastic system in the vicinity of the flutter boundary is studied via the use of a new methodology based on the Liapunov First Quantity. The expected outcome of this study is: a) to greatly enhance the scope and reliability of the aeroelastic analysis and design criteria of advanced supersonic/hypersonic flight vehicles and, b) provide a theoretical basis for the analysis of more complex nonlinear aeroelastic systems.

Silva, Walter A.↗

About the Effect of Control on Flutter and Post-Flutter of a Supersonic/Hypersonic Cross-Sectional Wing

The control of the flutter instability and the conversion of the dangerous character of the flutter instability boundary into the undangerous one of a cross-sectional wing in a supersonic/hypersonic flow field is presented. The objective of this paper is twofold: i) to analyze the implications of nonlinear unsteady aerodynamics and physical nonlinearities on the character of the instability boundary in the presence of a control capability, and ii) to outline the effects played in the same respect by some important parameters of the aeroelastic system. As a by-product of this analysis, the implications of the active control on the linearized flutter behavior of the system are captured and emphasized. The bifurcation behavior of the open/closed loop aeroelastic system in the vicinity of the flutter boundary is studied via the use of a new methodology based on the Liapunov First Quantity. The expected outcome of this study is: a) to greatly enhance the scope and reliability of the aeroelastic analysis and design criteria of advanced supersonic/hypersonic flight vehicles and, b) provide a theoretical basis for the analysis of more complex nonlinear aeroelastic systems.

Marzocca, Piergiovanni↗

PheniX: A New Vision for the Hard X-ray Sky

We are proposing a mission devoted to high energy X-ray astronomy that is based on a focusing telescope operating in the 1-200 keV energy range but optimized for the hard X-ray range. The main scientific topics concern: Physics of compact objects: The proximity of compact objects provides a unique laboratory to study matter and radiation in extreme conditions of temperature and density in strong gravitational environment. The emission of high energy photons from these objects is far from being understood. The unprecedented sensitivity in the high energy domain will allow a precise determination of the non-thermal processes at work in the vicinity of compact objects. The full 1-200 keV energy coverage will be ideal to disentangle the emission processes produced in the spacetime regions most affected by strong-gravity, as well as the physical links: disk-thermal emission-iron line-comptonisation-reflection-non-thermal emission-jets. Neutron stars-magnetic field-cyclotron lines: Time resolved spectroscopy (and polarimetry) at ultra-high sensitivity of AXP, milliseconds pulsars and magnetars will give new tools to study the role of the synchrotron processes at work in these objects. Cyclotron lines-direct measurement of magnetic filed-equation of state constraints-short bursts-giant flares could all be studied with great details. AGN: The large sensitivity improvement will provide detailed spectral properties of the high energy emission of AGN's. This will give a fresh look to the connection between accretion and jet emission and will provide a new understanding of the physical processes at work. Detection of high-redshift active nuclei in this energy range will allow to introduce an evolutionary aspect to high-energy studies of AGN, probing directly the origin of the Cosmic X-ray Background also in the non-thermal range (> 20 keV). Element formation-Supernovae: The energy resolution achievable for this mission (<0.5 keV) and a large high energy effective area are ideally suited for the 44Ti line study (68 and 78 keV). This radioactive nuclei emission will give an estimate of their quantities and speed in their environment. In addition the study of the spatial structure and spectral emission of SNR will advance our knowledge of the dynamics of supernovae explosions, of particles acceleration mechanisms and how the elements are released in the interstellar medium. Instrumental design: The progress of X-ray focusing optics techniques allows a major step in the instrumental design: the collecting area becomes independent of the detection area. This drastically reduces the instrumental background and will open a new era. The optics will be based on depth-graded multi-layer mirrors in a Wolter I configuration. To obtain a significant effective area in the hundred of keV range a focal length in the 40-50 meters range (attainable with a deployable mast) is needed. In addition such a mission could benefit from recent progress made on mirror coating. We propose to cover the 1-200 keV energy range with a single detector, a double-sided Germanium strip detector operating at 80 K. The main features will be: (a) good energy resolution (.150 keV at 5 keV and <.5 keV at 100 keV), (b) 3 dimensional event localization with a low number of electronic chains, (c) background rejection by the 3D localization, (d) polarisation capabilities in the Compton regime.

PHENIX↗

Noise Characteristics of a Four-Jet Impingement Device Inside a Broadband Engine Noise Simulator

The noise generation mechanisms for four directly impinging supersonic jets are investigated employing implicit large eddy simulations with a higher-order accurate weighted essentially non-oscillatory shock-capturing scheme. Impinging jet devices are often used as an experimental apparatus to emulate a broadband noise source. Although such devices have been used in many experiments, a detailed investigation of the noise generation mechanisms has not been conducted before. Thus, the underlying physical mechanisms that are responsible for the generation of sound waves are not well understood. The flow field is highly complex and contains a wide range of temporal and spatial scales relevant for noise generation. Proper orthogonal decomposition of the flow field is utilized to characterize the unsteady nature of the flow field involving unsteady shock oscillations, large coherent turbulent flow structures, and the sporadic appearance of vortex tubes in the center of the impingement region. The causality method based on Lighthill's acoustic analogy is applied to link fluctuations of flow quantities inside the source region to the acoustic pressure in the far field. It will be demonstrated that the entropy fluctuation term in the Lighthill's stress tensor plays a vital role in the noise generation process. Consequently, the understanding of the noise generation mechanisms is employed to develop a reduced-order linear acoustic model of the four-jet impingement device. Finally, three linear acoustic FJID models are used as broadband noise sources inside an engine nacelle and the acoustic scattering results are validated against far-field acoustic experimental data.

Broadband↗

A Moving Discontinuous Galerkin Method with Interface Condition Enforcement for Reacting Hypersonic Flows

The necessity of enforcing conservation in computational elements or cells (element conservation) for discontinuous solutions is well understood and respected for solving conservation laws in computational fluid dynamics (CFD). In contrast, interface conservation, where the conservation across cell interfaces is enforced, is long ignored, and yet is also ruled and required by the underlying physics just like element conservation. Violation of the interface conservation across discontinuities is the root cause why an exact discontinuous solution can never be achieved in shock capturing methods. The interface conservation is examined and explored in this talk. Moving discontinuous Galerkin (MDG) finite element method with interface conservation enforcement (MDG-ICE) [1],[2] are then presented for solving compressible flow problems with discontinuities based on the observation that the interface conservation can only be satisfied, only when mesh interfaces are aligned with discontinuities. In the MDG-ICE formulation, both conservative quantities and grid geometry are considered as independent variables. A space-time DG formulation is used to solve the multi-material compressible Euler equations in the standard discontinuous solution space and the discrete grid geometry is solved using a variational formulation in a continuous space. A self-adaptive Levenberg-Marquardt method is utilized to solve the resulting over-determined system of nonlinear equations arising from the MDG-ICE formulation. A number of numerical experiments for a variety of flow problems are conducted to assess the accuracy and performance of the MDG-ICE method. Numerical results obtained indicate that the MDG-ICE method is able to deliver the designed order of both h- and p-convergence even for discontinuous solutions, and detect all types of interfaces, via interface condition enforcement and satisfy, via grid movement, the compressible Euler equations and the associated interface condition.

Discontinuous Galekin↗

Coupled Material Response Simulations of Dragonfly Capsule and DrEAM Reconstruction

Icarus is a three-dimensional, unstructured, finite-volume material response solver developed at NASA Ames Research Center and has been recently used to analyze the material response of the Dragonfly capsule for a variety of problems. Since the Dragonfly capsule will be instrumented in a similar manner to the Mars 2020 and MSL capsules, it is important to assess how our current simulation tools can aid in understanding Dragonfly Entry Aerosciences Measurements (DrEAM). In this presentation, the Ares multi-physics tool that couples Icarus to the flow and radiation physics of the aerothermal environment will be used to better understand how modeling sensitivities might affect environment reconstructions and our understanding of measured data. Ares couples Icarus to the US3D flow solver and NERO, a reduced-order, finite-volume radiation transport solver and uses a customized time-scale management to enable coupled simulations for a large portion of the Dragonfly trajectory. As a result of the coupling, a more accurate and consistent assessment of modelling sensitivities to aerothermal reconstruction can be assessed. For example, the radiometer is sensitive to the quantity of CN in the flow, which is a byproduct of the free-stream methane but also the pyrolysis gas products injected into the boundary layer due to ablation of the heatshield. Ares will be used to conduct a simulation of the full Dragonfly capsule for 50 seconds of the trajectory. The different aerothermal and material response models will be discussed and the key results will be presented in terms of the simulated thermocouple and radiometer measurements on the backshell.

Ablation↗

The upper atmosphere research satellite

The Upper Atmosphere Research Satellite (UARS) will provide, for the first time, data on a global basis for the study of the physical processes acting witin and upon the stratosphere, mesosphere, and lower thermosphere. Specifically, the areas of scientifc study to be addressed are energy input and loss, photochemistry, dynamics, and the coupling among processes and between atmospheric regions. The UARS is a single observatory consisting of a multimission modular spacecraft (MMS) and an instrument module containing 10 scientific instruments. The satellite will be Shuttle launched and placed in a 57 deg inclined orbit at 600 km altitude. A Central Data Handling Facility (CDHF) will receive data from the satellite and process these data into atmospheric quantities for use by the science team. The 'processed' data will be stored at the CDHF and will be available via communication lines for analysis by the investigators at their home laboratories using remote computers. Together with other satellite programs, balloons, sounding rockets, and laboratory efforts, UARS will make available the opportunity for extensive coordination of data devoted to solar terrestrial study.

Burr, P. T.↗

Neural network uncertainty assessment using Bayesian statistics: a remote sensing application

Neural network (NN) techniques have proved successful for many regression problems, in particular for remote sensing; however, uncertainty estimates are rarely provided. In this article, a Bayesian technique to evaluate uncertainties of the NN parameters (i.e., synaptic weights) is first presented. In contrast to more traditional approaches based on point estimation of the NN weights, we assess uncertainties on such estimates to monitor the robustness of the NN model. These theoretical developments are illustrated by applying them to the problem of retrieving surface skin temperature, microwave surface emissivities, and integrated water vapor content from a combined analysis of satellite microwave and infrared observations over land. The weight uncertainty estimates are then used to compute analytically the uncertainties in the network outputs (i.e., error bars and correlation structure of these errors). Such quantities are very important for evaluating any application of an NN model. The uncertainties on the NN Jacobians are then considered in the third part of this article. Used for regression fitting, NN models can be used effectively to represent highly nonlinear, multivariate functions. In this situation, most emphasis is put on estimating the output errors, but almost no attention has been given to errors associated with the internal structure of the regression model. The complex structure of dependency inside the NN is the essence of the model, and assessing its quality, coherency, and physical character makes all the difference between a blackbox model with small output errors and a reliable, robust, and physically coherent model. Such dependency structures are described to the first order by the NN Jacobians: they indicate the sensitivity of one output with respect to the inputs of the model for given input data. We use a Monte Carlo integration procedure to estimate the robustness of the NN Jacobians. A regularization strategy based on principal component analysis is proposed to suppress the multicollinearities in order to make these Jacobians robust and physically meaningful.

Neural Networks (Computer)↗

Human Research Program Space Human Factors Engineering (SHFE) Standing Review Panel (SRP)

The Space Human Factors Engineering (SHFE) Standing Review Panel (SRP) evaluated 22 gaps and 39 tasks in the three risk areas assigned to the SHFE Project. The area where tasks were best designed to close the gaps and the fewest gaps were left out was the Risk of Reduced Safety and Efficiency dire to Inadequate Design of Vehicle, Environment, Tools or Equipment. The areas where there were more issues with gaps and tasks, including poor or inadequate fit of tasks to gaps and missing gaps, were Risk of Errors due to Poor Task Design and Risk of Error due to Inadequate Information. One risk, the Risk of Errors due to Inappropriate Levels of Trust in Automation, should be added. If astronauts trust automation too much in areas where it should not be trusted, but rather tempered with human judgment and decision making, they will incur errors. Conversely, if they do not trust automation when it should be trusted, as in cases where it can sense aspects of the environment such as radiation levels or distances in space, they will also incur errors. This will be a larger risk when astronauts are less able to rely on human mission control experts and are out of touch, far away, and on their own. The SRP also identified 11 new gaps and five new tasks. Although the SRP had an extremely large quantity of reading material prior to and during the meeting, we still did not feel we had an overview of the activities and tasks the astronauts would be performing in exploration missions. Without a detailed task analysis and taxonomy of activities the humans would be engaged in, we felt it was impossible to know whether the gaps and tasks were really sufficient to insure human safety, performance, and comfort in the exploration missions. The SRP had difficulty evaluating many of the gaps and tasks that were not as quantitative as those related to concrete physical danger such as excessive noise and vibration. Often the research tasks for cognitive risks that accompany poor task or information design addressed only part, but not all, of the gaps they were programmed to fill. In fact the tasks outlined will not close the gap but only scratch the surface in many cases. In other cases, the gap was written too broadly, and really should be restated in a more constrained way that can be addressed by a well-organized and complementary set of tasks. In many cases, the research results should be turned into guidelines for design. However, it was not clear whether the researchers or another group would construct and deliver these guidelines.

Wichansky, Anna↗