Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLYVINYLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Inhibition of mTOR improves the impairment of acidification in autophagic vesicles caused by hepatic steatosis

Recent investigations revealed that dysfunction of autophagy involved in the progression of chronic liver diseases such as alcoholic and nonalcoholic steatohepatitis and hepatocellular neoplasia. Previously, it was reported that hepatic steatosis disturbs autophagic proteolysis via suppression of both autophagic induction and lysosomal function. Here, we demonstrate that autophagic acidification was altered by a decrease in lysosomal proton pump vacuolar-ATPase (V-ATPase) in steatohepatitis. The number of autophagic vesicles was increased in hepatocytes from obese KKAy mice as compared to control. Similarly, autophagic membrane protein LC3-II and lysosomal protein LAMP-2 expression were enhanced in KKAy mice liver. Nevertheless, both phospho-mTOR and p62 expression were augmented in KKAy mice liver. More than 70% of autophagosomes were stained by LysoTracker Red (LTR) in hepatocytes from control mice; however, the percentage of acidic autolysosomes was decreased in hepatocytes from KKAy mice significantly (40.1 ± 3.48%). Both protein and RNA level of V-ATPase subunits ATP6v1a, ATP6v1b, ATP6v1d in isolated lysosomes were suppressed in KKAy mice as compared to control. Interestingly, incubation with mTOR inhibitor rapamycin increased in the rate of LTR-positive autolysosomes in hepatocytes from KKAy mice and suppressed p62 accumulation in the liver from KKAy mice which correlated to an increase in the V-ATPase subunits expression. These results indicate that down-regulation of V-ATPase due to hepatic steatosis causes autophagic dysfunction via disruption of lysosomal and autophagic acidification. Moreover, activation of mTOR plays a pivotal role on dysregulation of lysosomal and autophagic acidification by modulation of V-ATPase expression and could therefore be a useful therapeutic target to ameliorate dysfunction of autophagy in NAFLD. - Highlights: • Hepatic steatosis causes accumulation of autophagic vesicles in hepatocytes. • Hepatic steatosis disturbs acidification of autophagic vesicles. • Lipid accumulation suppresses the expression of lysosomal V-ATPase subunits. • Rapamycin upregulates the expression of lysosomal V-ATPase suppressed in NAFLD. • Rapamycin ameliorates the acidification of autolysosomes impaired in NAFLD.

60 APPLIED LIFE SCIENCES↗

Effect of the linkers between the zinc fingers in zinc finger protein 809 on gene silencing and nuclear localization

Zinc finger protein 809 (ZFP809) belongs to the Kruppel-associated box-containing zinc finger protein (KRAB-ZFP) family and functions in repressing the expression of Moloney murine leukemia virus (MoMLV). ZFP809 binds to the primer-binding site (PBS)located downstream of the MoMLV-long terminal repeat (LTR) and induces epigenetic modifications at integration sites, such as repressive histone modifications and de novo DNA methylation. KRAB-ZFPs contain consensus TGEKP linkers between C2H2 zinc fingers. The phosphorylation of threonine residues within linkers leads to the inactivation of zinc finger binding to target sequences. ZFP809 also contains consensus linkers between zinc fingers. However, the function of ZFP809 linkers remains unknown. In the present study, we constructed ZFP809 proteins containing mutated linkers and examined their ability to silence transgene expression driven by MLV, binding ability to MLV PBS, and cellular localization. The results of the present study revealed that the linkers affected the ability of ZFP809 to silence transgene expression. Furthermore, this effect could be partly attributed to changes in the localization of ZFP809 proteins containing mutated linkers. Further characterization of ZFP809 linkers is required for understanding the functions and features of KRAB-ZFP-containing linkers. - Highlights: • ZFP809 has three consensus linkers between the zinc fingers. • Linkers are required for ZFP809 to silence transgene expression driven by MLV-LTR. • Linkers affect the precise nuclear localization of ZFP809.

60 APPLIED LIFE SCIENCES↗

FXR blocks the growth of liver cancer cells through inhibiting mTOR-s6K pathway

The nuclear receptor Farnesoid X Receptor (FXR) is likely a tumor suppressor in liver tissue but its molecular mechanism of suppression is not well understood. In this study, the gene expression profile of human liver cancer cells was investigated by microarray. Bioinformatics analysis of these data revealed that FXR might regulate the mTOR/S6K signaling pathway. This was confirmed by altering the expression level of FXR in liver cancer cells. Overexpression of FXR prevented the growth of cells and induced cell cycle arrest, which was enhanced by the mTOR/S6K inhibitor rapamycin. FXR upregulation also intensified the inhibition of cell growth by rapamycin. Downregulation of FXR produced the opposite effect. Finally, we found that ectopic expression of FXR in SK-Hep-1 xenografts inhibits tumor growth and reduces expression of the phosphorylated protein S6K. Taken together, our data provide the first evidence that FXR suppresses proliferation of human liver cancer cells via the inhibition of the mTOR/S6K signaling pathway. FXR expression can be used as a biomarker of personalized mTOR inhibitor treatment assessment for liver cancer patients. -- Highlights: •FXR inhibits the proliferation of liver cancer cells by prolonging G0/G1 phase. •Microarray results indicate that mTOR-S6k signaling is involved in cellular processes in which FXR plays an important role. •FXR blocks the growth of liver cancer cells via the inhibition of the mTOR/S6K signaling pathway in vitro and in vivo.

60 APPLIED LIFE SCIENCES↗

Nanoscale characterization of engineered cementitious composites (ECC)

Engineered cementitious composites (ECC) are ultra-ductile fiber-reinforced cementitious composites. The nanoscale chemical and mechanical properties of three ECC formulae (one standard formula, and two containing nanomaterial additives) were studied using nanoindentation, electron microscopy, and energy dispersive spectroscopy. Nanoindentation results highlight the difference in modulus between bulk matrix ({approx} 30 GPa) and matrix/fiber interfacial transition zones as well as between matrix and unreacted fly ash ({approx} 20 GPa). The addition of carbon black or carbon nanotubes produced little variation in moduli when compared to standard M45-ECC. The indents were observed by electron microscopy; no trace of the carbon black particles could be found, but nanotubes, including nanotubes bridging cracks, were easily located in ultrafine cracks near PVA fibers. Elemental analysis failed to show a correlation between modulus and chemical composition, implying that factors such as porosity have more of an effect on mechanical properties than elemental composition.

36 MATERIALS SCIENCE↗

The hydration of reactive cement-in-polymer dispersions studied by nuclear magnetic resonance

The behaviour of two novel cement-in-polymer (c/p) dispersions, namely cement-in-poly(vinyl acetate) and cement-in-poly(vinyl alcohol) upon exposure to water at room temperature was investigated by a combination of various NMR methods. The swelling, cracking, and the water ingress were monitored non-destructively using {sup 1}H single point imaging. The hydration of the cement matrix was investigated using {sup 29}Si NMR whilst {sup 13}C CPMAS NMR spectra allowed the quantification of the kinetics of the hydrolysis reaction of poly(vinyl acetate) into poly(vinyl alcohol). The polymer controls the rate of water ingress and swelling which in turn determines the behaviour of the c/p dispersions upon exposure to water. For the cement-in-poly(vinyl alcohol), the rates of water ingress and swelling are much faster than the hydration of the clinker whilst for the cement-in-poly(vinyl acetate) the slow rates of the two processes allow the formation of a cementious matrix which assures the stability of the sample.

36 MATERIALS SCIENCE↗

Studies on influence of process parameters on simultaneous biodegradation of atrazine and nutrients in aquatic environments by a membrane photobioreactor

Highlights: • Membrane photobioreactor was tested for atrazine, COD and nutrients removal. • All target pollutants were removed in MPBR systems. • High biomass accumulation and changes in the biomass composition was observed. • A high quality effluent was recorded in the MPBR. A Lab scale algal-bacterial membrane photobioreactor (MPBR) was designed and operated under 12-h light and 12-h dark conditions with a light intensity of 8000 lx, in order to investigate the effects of initial concentrations of atrazine, carbon concentration, and hydraulic retention time on the ability of this photobioreactor in simultaneous removal of atrazine and nutrients in the continuous mode. The removal efficiencies of atrazine (ATZ), chemical oxygen demand (COD), phosphorus (PO{sub 4}{sup 3-}-P) and nitrogen (NOx) in optimum condition was more than 95%, 99%, 98% and 97% when the maximum removal rates were 9.5 × 10{sup −3}, 99.231, 11.773 and 7.762 mg/L-day, respectively. Results showed that the quality of the effluent was reduced by the increase of atrazine concentration. The outcomes on the hydraulic and toxic shocks indicated that the system has a relatively good resistance to the shocks and can return to the stable conditions. Microalgae showed a great deal of interest and capability in cultivating and attaching to the surface of the membrane and bioreactor, and the total biomass accumulated in the system was greater than 6 g/L. The kinetic coefficients of atrazine removal were also studied using various kinetic models. The maximum atrazine removal rate was determined by the modified Stover-Kincannon model. The results approved the ability of the MPBR reactor in wastewater treatment and microalgae cultivation and growth. The decline of atrazine concentration in this system could be attributed to the algal-bacterial symbiosis and co-metabolism process. Accordingly, the MPBR reactor is a practical, simple, economical and therefore suitable process for simultaneous biodegradation of chlorinated organic compounds and nutrients removal from aquatic environments.

54 ENVIRONMENTAL SCIENCES↗

Fluorographite-co-polydimethylsiloxane coated polyvinylidene-fluoride membrane for desalination of highly saline water with humic acid in direct contact membrane distillation

Highlights: • Surface modifications by FGi particles with PDMS binder of PVDF microporous membranes shown improvement in DCMD. • LEP with DI water & performance of M2-M4 modified membranes in DCMD was enhanced with 1M NaCl & 10 ppm HA feed solution. • Amphiphobicity was evidenced by CA with low surface tension liquids upto 38 dyne/cm as well as with canola oil. • EDX analysis proved enhancement in FC ratio and membrane surface analysis lead to understand enhanced performance in DCMD. Membranes with amphiphobic properties are crucial for desalination of concentrated saline water with organic foulant by membrane distillation. In this research, we coated Fluorographite (FGi) particles on polyvinylidene-fluoride (PVDF) flat sheet membranes with 0.8% v/v polydimethylsiloxane (PDMS) as binder by filtration coating method. We evaluated its amphiphobicity via contact angles which were observed by DI water, canola oil and organic solutions as mimicking for oleophobicity. Surface modifications by FGi particles on the surface of membranes was introduced with PDMS binder which brought bifunctionality of amphiphobicity to enhance hydrophobicity and oleophobicity. We also investigated performance of coated membranes in direct contact membrane distillation (DCMD) with 1 molar concentrated NaCl solution along with humic acid being organic foulant and compared with virgin membrane (M1 membrane) and Liquid entry pressure (LEP) was also evaluated. LEP was measured by dynamic method which shown considerable improvement in coated membranes. M3 membrane showed overall better performance in terms of salt rejection higher than 99.87% and flux as compared to M1 membrane. Furthermore, the evaluation of surface characterizations was done by FESEM with EDX, AFM and FTIR. Surface morphology confirmed the coating of FGi on membrane surface while EDX evidenced increase in atomic percent of fluorine in turn F:C ratio.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of Radiation Dose and Image Quality for the Varian Cone Beam Computed Tomography System

Purpose: To compare the image quality and dosimetry on the Varian cone beam computed tomography (CBCT) system between software Version 1.4.13 and Version 1.4.11 (referred to as 'new' and 'old' protocols, respectively, in the following text). This study investigated organ absorbed dose, total effective dose, and image quality of the CBCT system for the head-and-neck and pelvic regions. Methods and Materials: A calibrated Farmer chamber and two standard cylindrical Perspex CT dosimetry phantoms with diameter of 16 cm (head phantom) and 32 cm (body phantom) were used to measure the weighted cone-beam computed tomography dose index (CBCTDIw) of the Varian CBCT system. The absorbed dose of different organs was measured in a female anthropomorphic phantom with thermoluminescent dosimeters (TLD) and the total effective dose was estimated according to International Commission on Radiological Protection (ICRP) Publication 103. The dose measurement and image quality were studied for head-and-neck and pelvic regions, and comparison was made between the new and old protocols. Results: The values of the new CBCTDIw head-and-neck and pelvic protocols were 36.6 and 29.4 mGy, respectively. The total effective doses from the new head-and-neck and pelvic protocols were 1.7 and 8.2 mSv, respectively. The absorbed doses of lens for the new 200{sup o} and old 360{sup o} head-and-neck protocols were 3.8 and 59.4 mGy, respectively. The additional secondary cancer risk from daily CBCT might be up to 2.8%. Conclusions: The new Varian CBCT provided volumetric information for image guidance with acceptable image quality and lower radiation dose. This imaging tool gave a better standard for patient daily setup verification.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A one-pot synthetic approach to prepare palladium nanoparticles embedded hierarchically porous TiO{sub 2} hollow spheres for hydrogen peroxide sensing

A simple one-step method to fabricate hierarchically porous TiO{sub 2}/Pd composite hollow spheres without any template was developed by using solvothermal treatment. Pd nanoparticles (2-5 nm) were well dispersed in the mesopores of the TiO{sub 2} hollow spheres via in-situ reduction. In our experiment, polyvinylpyrrolidone played an important role in the synthetic process as the reducing agent and the connective material between TiO{sub 2} and Pd nanoparticles. HF species generated from solvothermal reaction leaded to the formation of TiO{sub 2} hollow spheres and Ostwald ripening was another main factor that affected the size and structure of the hollow spheres. The as-prepared TiO{sub 2}/Pd composite hollow spheres exhibited high electrocatalytic activity towards the reduction of H{sub 2}O{sub 2}. The sensitivity was about 226.72 {mu}A mM{sup -1} cm{sup -2} with a detection limit of 3.81 {mu}M at a signal-to-noise ratio of 3. These results made the hierarchically porous TiO{sub 2}/Pd composite a promising platform for fabricating new nonenzymic biosensors. - Graphical Abstract: A new one-step solvothermal method was developed to prepare Pd nanoparticles embedded hierarchically porous TiO{sub 2} hollow spheres. Due to its unique nanostructure, the prepared TiO{sub 2}/Pd modified GC electrode exhibit a high sensitivity (226.72 {mu}A mM{sup -1} cm{sup -2}), a relatively low reduction potential (-0.2 V), a fast response time (<3 s) and a relatively low detection limit of 3.81 {mu}M (S/N=3) towards H{sub 2}O{sub 2}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Solvothermal synthesis and luminescence properties of monodisperse Gd{sub 2}O{sub 3}:Eu{sup 3+} and Gd{sub 2}O{sub 3}:Eu{sup 3+}SiO{sub 2} nanospheres

A series of uniform, monodispersed Gd(OH){sup 3}:Eu{sup 3+} nanospheres less than 100 nm were successfully synthesized with iron ions as catalyst and DMF as solvent under the solvothermal condition. Cetyltrimethyl ammonium bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as co-surfactant during this facile procedure should be changed as A series of uniform, monodisperse Gd(OH){sup 3}:Eu{sup 3+} nanospheres less than 100 nm in diameter were successfully synthesized with solvothermal method. Iron ion was used as catalyst and Dimethylformamide (DMF) as solvent, Cetyltrimethyl Ammonium Bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as surfactants. Further calcination process was applied to prepare Gd{sub 2}O{sub 3}:Eu{sup 3+} nanoshpheres during this facile procedure. -- Graphical abstract: Uniform and monodisperse Gd{sub 2}O{sub 3}:Eu{sup 3+} and Gd{sub 2}O{sub 3}:Eu{sup 3+}SiO{sub 2} monodisperse were synthesized by annealed relative parent's Gd(OH){sub 3}:Eu{sup 3+} and Gd(OH){sub 3}:Eu{sup 3+}SiO{sub 2}, respectively. Their morphology and luminescence properties all strongly depended on the iron concentration. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photochemical preparation of CdS hollow microspheres at room temperature and their use in visible-light photocatalysis

CdS hollow microspheres have been successfully prepared by a photochemical preparation technology at room temperature, using polystyrene latex particles as templates, CdSO{sub 4} as cadmium source and Na{sub 2}S{sub 2}O{sub 3} as both sulphur source and photo-initiator. The process involved the deposition of CdS nanoparticles on the surface of polystyrene latex particles under the irradiation of an 8 W UV lamp and the subsequent removal of the latex particles by dispersing in dichloromethane. Photochemical reactions at the sphere/solution interface should be responsible for the formation of hollow spheres. The as-prepared products were characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. Such hollow spheres could be used in photocatalysis and showed high photocatalytic activities in photodegradation of methyl blue (MB) in the presence of H{sub 2}O{sub 2}. The method is green, simple, universal and can be extended to prepare other sulphide and oxide hollow spheres. -- Graphical abstract: Taking polystyrene spheres dispersed in a precursor solution as templates, CdS hollow microspheres composed of nanoparticles were successfully prepared via a new photochemical route at room temperature. Display Omitted Research highlights: {yields} Photochemical method was first employed to prepare hollow microspheres. {yields} CdS hollow spheres were first prepared at room temperature using latex spheres. {yields} The polystyrene spheres used as templates were not modified with special groups. {yields}The CdS hollow microspheres showed high visible-light photocatalytic activities.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure and magnetic properties of the cubic oxide fluoride BaFeO{sub 2}F

Fluorination of the parent oxide, BaFeO{sub 3-{delta}}, with polyvinylidine fluoride gives rise to a cubic compound with a=4.0603(4) A at 298 K. {sup 57}Fe Moessbauer spectra confirmed that all the iron is present as Fe{sup 3+}. Neutron diffraction data showed complete occupancy of the anion sites, indicating a composition BaFeO{sub 2}F, with a large displacement of the iron off-site. The magnetic ordering temperature was determined as T{sub N}=645{+-}5 K. Neutron diffraction data at 4.2 K established G-type antiferromagnetism with a magnetic moment per Fe{sup 3+} ion of 3.95 {mu}{sub B}. However, magnetisation measurements indicated the presence of a weak ferromagnetic moment that is assigned to the canting of the antiferromagnetic structure. {sup 57}Fe Moessbauer spectra in the temperature range 10-300 K were fitted with a model of fluoride ion distribution that retains charge neutrality of the perovskite unit cell. - Graphical abstract: The cubic oxide fluoride of composition BaFeO{sub 2}F has been synthesised and characterised. Highlights: > Fluorination of BaFeO{sub 3-{delta}} with polyvinylidene fluoride gives a cubic oxide fluoride of composition BaFeO{sub 2}F. > BaFeO{sub 2}F adopts a canted antiferromagnetic structure and is different from the related phase of composition SrFeO{sub 2}F. > A model of fluoride ion distribution about iron in BaFeO{sub 2}F has been explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of carbon microcapsules containing silicon nanoparticles-carbon nanotubes nanocomposite by sol-gel method for anode in lithium ion battery

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method followed by a carbonization process. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were produced by a wet-type beadsmill method. To obtain Si-CNT nanocomposites with spherical morphologies, a silica precursor (tetraethylorthosilicate, TEOS) and polymer (PMMA) mixture was employed as a structure-directing medium. Thus the Si-CNT/Silica-Polymer microspheres were prepared by an acid catalyzed sol-gel method. Then a carbon precursor such as polypyrrole (PPy) was incorporated onto the surfaces of pre-existing Si-CNT/silica-polymer to generate Si-CNT/Silica-Polymer-PPy microspheres. Subsequent thermal treatment of the precursor followed by wet etching of silica produced Si-CNT-C microcapsules. The intermediate silica/polymer must disappear during the carbonization and etching process resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT-C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT-C microcapsules were measured with a lithium battery half cell tests. - Graphical Abstract: Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT-C) have been fabricated by a surfactant mediated sol-gel method. Highlights: > Polymeric microcapsules containing Si-CNT transformed to carbon microcapsules. > Accommodate volume changes of Si NPs during Li ion charge/discharge. > Sizes of microcapsules were controlled by experimental parameters. > Lithium storage capacity and coulombic efficiency were demonstrated. > Use of sol-gel procedure as intermediate reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and formation mechanism of three-dimensionally ordered macroporous (3DOM) MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3}, and photonic stop band properties of 3DOM CaCO{sub 3}

Three-dimensionally ordered macroporous (3DOM) magnesium (Mg) oxide (MgO), MgSO{sub 4}, calcium (Ca) carbonate (CaCO{sub 3}), and strontium (Sr) carbonate (SrCO{sub 3}) were prepared using a colloidal crystal of polymer spheres as a template. Ethanol or ethanol-water solution of metal salts (acetate or nitrate) and citric acid was infiltrated into the void of the colloidal crystal template of a monodispersed poly(methyl methacrylate) (PMMA) sphere. Heating of this PMMA-metal salt-citric acid composite produced the desired well-ordered 3DOM materials with a high pore fraction, which was confirmed by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ultraviolet-visible (UV-vis) diffuse reflectance spectra. The presence of citric acid is crucial for production of the 3DOM structures. Reaction of citric acid with metal salt produces metal citrate solid in the void of PMMA spheres, which is necessary to maintain the 3DOM structure during the calcination process. 3DOM CaCO{sub 3} shows opalescent colors because of it's photonic stop band properties. - Graphical abstract: Well-ordered 3-dimensionally ordered macroporous MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3} materials were obtained in a high pore fraction. Highlights: > An easy preparation method of 3D ordered macroporous (3DOM) MgO, MgSO{sub 4}, CaCO{sub 3}, and SrCO{sub 3} materials. > Their structural characterization. > Their formation mechanism. > Photonic properties of 3DOM CaCO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of the La{sub 1-x}Sr{sub x}FeO{sub 3-{delta}} system and the fluorinated phases La{sub 1-x}Sr{sub x}FeO{sub 3-x}F{sub x}

The oxyfluorides La{sub 1-x}Sr{sub x}FeO{sub 3-x}F{sub x} have been prepared by fluorination of the precursor oxides La{sub 1-x}Sr{sub x}FeO{sub 3-{delta}} via a low temperature route using poly(vinylidene fluoride) (PVDF). The structures of the oxides and oxyfluorides were investigated in detail by the Rietveld analysis of powder diffraction data. The oxyfluorides crystallize in the space group Pnma for 0<x{<=}0.9 (SrFeO{sub 2}F itself is cubic, space group Pm-3m) and show a sort of two-step structural distortion for decreasing x. Furthermore, a structural comparison of the oxyfluorides with the oxides is given, revealing an increase of the volume per La{sub 1-x}Sr{sub x}FeX{sub 3} unit during fluorination, of which the magnitude highly depends on the value of x. - Graphical abstract: The crystal structures of the perovskites La{sub 1-x}Sr{sub x}FeO{sub 3-x}F{sub x} for x=0.8 (a), 0.5 (b) and 0.1 (c). Highlights: > Oxyfluorides La{sub 1-x}Sr{sub x}FeO{sub 3-x}F{sub x} were prepared via low temperature fluorination using PVDF. > A structural investigation of the compounds La{sub 1-x}Sr{sub x}FeO{sub 3-x}F{sub x} is presented in detail. > Differences in structure are discussed in comparison with the precursor oxides La{sub 1-x}Sr{sub x}FeO{sub 3-{delta}}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of amine-grafted multi-walled carbon nanotubes on physical and rheological properties of PMMA-based nanocomposites

In this work, poly(methyl methacrylate) (PMMA) was grafted onto amine treated multi-walled carbon nanotubes (NH-MWNTs) and the physical and rheological properties of the NH-MWNTs-g-PMMA nanocomposites were investigated. The graft reaction of NH-MWNTs and the PMMA matrix was confirmed from the change of the N{sub 1S} peaks, including those of amine oxygen and amide oxygen, by X-ray photoelectron spectroscopy (XPS). The thermal and mechanical properties of the NH-MWNT-g-PMMA nanocomposites were enhanced by the graft reaction between NH-MWNTs and PMMA matrix. In addition, the viscosity of the nanocomposites was increased with the addition of NH-MWNTs. Storage (G') and loss modulus (G'') were significantly increased by increase in the NH-MWNT content compared to acid-treated MWNTs/PMMA nanocomposites. This increase was attributed to the strong interaction by the grafting reaction between NH-MWNTs and the PMMA matrix. - Graphical abstract: This describes the increase of mechanical properties in NH-MWNTs-g-PMMA hybrid composites with different NH-MWNT contents. Highlights: > Aminized carbon nanotubes are used as reinforcement for poly(methylmethacrylate). > Poly(methylmethacrylate) is grafted on aminized carbon nanotubes by thermal reaction. > Grafting of carbon nanotubes and polymer provide enhanced physical properties. > It was due to the strong interaction between carbon nanotubes and polymer matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 nanocomposite as a polymer-inorganic hybrid catalyst for the Suzuki-Miyaura cross-coupling reaction

Composite poly(N-vinyl-2-pyrrolidone)/KIT-5 (PVP/KIT-5) was prepared by in situ polymerization method and used as a support for palladium nanoparticles obtained through the reduction of Pd(OAc){sub 2} by hydrazine hydrate. The physical and chemical properties of the catalyst were investigated by XRD, FT-IR, UV-vis, TG, BET, SEM, and TEM techniques. The catalytic performance of this novel heterogeneous catalyst was determined for the Suzuki-Miyaura cross-coupling reaction between aryl halides and phenylboronic acid in the presence of water at room temperature. The stability of the nanocomposite catalyst was excellent and could be reused 8 times without much loss of activity in the Suzuki-Miyaura cross-coupling reaction. - Graphical Abstract: Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 was prepared as an organic-inorganic hybrid catalyst for the Suzuki-Miyaura reaction. The stability of the catalyst was excellent and could be reused 8 times in the Suzuki-Miyaura reaction. Highlights: > Pd-poly(N-vinyl-2-pyrrolidone)/KIT-5 was prepared as a novel nanocomposite. > Nanocomposite was prepared based on a cage-type mesoporous system. > Catalyst showed excellent activity for Suzuki-Miyaura reaction in water. > Stability of the catalyst was excellent and could be reused 8 times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗