Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

CH spectroscopy for carbon chemical erosion analysis in high density low temperature hydrogen plasma

The CH A-X molecular band is measured upon seeding the hydrogen plasma in the linear plasma generator Pilot-PSI [electron temperature T{sub e}=0.1-2.5 eV and electron density n{sub e}=(0.5-5)x10{sup 20} m{sup -3}] with methane. Calculated inverse photon efficiencies for these conditions range from 3 up to >10{sup 6} due to a steeply decreasing electron excitation cross section. The experiments contradict the calculations and show a constant effective inverse photon efficiency of {approx}100 for T{sub e}<1 eV. The discrepancy is explained as the CH A level is populated through dissociative recombination of the molecular ions formed by charge exchange. Collisional de-excitation is observed for n{sub e}>5x10{sup 20} m{sup -3} and 0.1 eV<T{sub e}<1 eV. These results form a framework for in situ carbon erosion measurements in future fusion reactors such as ITER.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gated pinhole camera imaging of the high-energy ions emitted by a discharge produced Sn plasma for extreme ultraviolet generation

The origin and nature of the high-energy ions emitted by a discharge produced plasma source are studied using gated pinhole camera imaging. Time-of-flight analysis in combination with Faraday cup measurements enables characterization of the high-velocity component of the ionic debris. The use of an optional magnetic field allows mass-to-charge analysis of the first part of the Faraday cup signal. It is shown that this consists mainly of oxygen ions emitted from a region near the cathode. Time-resolved images of Sn ions with a kinetic energy of 45 keV visualize the regions in between the electrodes where the high-energy ion generation takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Studying Radiation from Z-pinch Wire Array and X-Pinch Plasmas: K-shell Mg to M-shell Mo

University-scale Z-pinch generators are able to produce plasmas with a broad range of temperatures, densities, and opacity properties depending on the type, size, and mass of wire-array loads and wire materials. Experiments with very different Z-pinch loads were performed on the 1 MA Zebra generator at UNR and analyzed during the last five years including Single and Nested Cylindrical, Conical, and various types of Planar Wire Arrays. It is shown that such wire arrays are good sources of x-rays and that they produce significant radiation yield (up to 25 kJ) on a ns time scale, and generate bright spots of sub-mm size. They can be used for studying radiative properties of moderate density (between 10{sup 18} cm{sup -3} and 5x10{sup 21} cm{sup -3}) and temperature (<=1.5 keV) plasmas. In addition, X-pinches generated higher density (>10{sup 22} cm{sup -3}) and temperature (>2 keV) plasmas on scales as small as a few mum to several mm in size. Wire materials with a broad range of nuclear charge Z were used, ranging from low-Z, such as alloyed Al wires with varying concentrations of Mg, to mid-Z, such as Stainless steel, Cu, Brass, and Mo. Uniform (made from one wire material) as well as combined (made from two wire materials with almost equal wire masses) wire arrays were considered. Uniform, combined, symmetric and asymmetric X-pinches (some of which included a small fraction of tracer Al wires) were also considered. Non-LTE kinetic models to account for K- and L-shell radiation were employed to understand radiative properties of Z-pinch and X-pinch plasmas. Implosion characteristics of such loads are discussed using the wire dynamics and MHD models. Opacity effects of Z-pinch plasmas are studied and benefits of using alloyed and tracer wires are highlighted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock Experiments on Pre-Compressed Fluid Helium

We summarize current methods and results for coupling laser-induced shocks into pre-compressed Helium contained in a diamond anvil cell (DAC). We are able to load helium, hydrogen, deuterium, and helium-hydrogen mixtures into a DAC and propagate a laser-generated shock into the pre-compressed sample. This technique has allowed us to measure the Hugoniot for helium at initial densities ranging from 1 to 3.5 times liquid density. We have developed and used a methodology whereby all of our measurements are referenced to crystalline quartz, which allows us to update our results as the properties of quartz are refined in the future. We also report the identification and elimination of severe electro-magnetic pulses (EMP) associated with plasma stagnation associated with ablation in a DAC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Future Opportunities in Plasma Physics with FELs

I will discuss experiments to understand the nature of hot and dense matter using ultrafast x-ray pulses from synchrotrons and free electron lasers. The capabilities of these new light sources will allow greater understanding of the structure, bonding, and properties of these unique plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Azimuthally correlated ablation between z-pinch wire cores

Azimuthally correlated wire core ablation was compared for closely spaced versus widely spaced wires in a 1 MA Z-pinch. X-ray point-projection diagnostics revealed that 240 {mu}m spaced wires exhibited a correlation coefficient approaching unity in both real space and in k-space. This correlated ablation between wires at a fixed axial location is believed to occur due to an enhanced, localized Joule heating. Wires separated by 2.47 mm or greater were uncorrelated in real space, but correlated in k-space, indicating the ablation structure between wires was shifted in phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental measurements of multiphoton enhanced air breakdown by a subthreshold intensity excimer laser

This work presents density, spectroscopic temperature, and shockwave measurements of laser induced breakdown plasma in atmospheric air by subthreshold intensity (5.5x10{sup 9} W/cm{sup 2}) 193 nm laser radiation. Using molecular spectroscopy and two-wavelength interferometry, it is shown that substantial ionization (>10{sup 16} cm{sup -3}) occurs that is not predicted by collisional cascade (CC) breakdown theory. While the focused laser irradiance is three orders of magnitude below the theoretical collisional breakdown threshold, the substantial photon energy at 193 nm (6.42 eV/photon) compared with the ionization potential of air (15.6 eV) significantly increases the probability of multiphoton ionization effects. By spectroscopically monitoring the intensity of the N{sub 2}{sup +} first negative system (B {sup 2}SIGMA{sub u}{sup +}-X {sup 2}SIGMA{sub g}{sup +}) vibrational bandhead (v{sup '}=0,v{sup ''}=0) at low pressure (20 Torr) where multiphoton effects are dominant, it is shown that two photon excitation, resonant enhanced multiphoton ionization is the primary mechanism for quantized ionization of N{sub 2} to the N{sub 2}{sup +}(B {sup 2}SIGMA{sub u}{sup +}) state. This multiphoton effect then serves to amplify the collisional breakdown process at higher pressures by electron seeding, thereby reducing the threshold intensity from that required via CC processes for breakdown and producing high density laser formed plasmas.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical Thomson scatter from a laser-ablated magnesium plume

We have carried out an optical Thomson scatter study of a KrF laser-ablated Mg plume. The evolution of the electron temperature and density at distances 2-5 mm from the target surface has been studied. We have observed that the electron density falls more rapidly than the atomic density and believe that this is a result of rapid dielectronic recombination. A comparison of the electron density profile and evolution with simple hydrodynamic modeling indicates that there is a strong absorption of the laser in the plasma vapor above the target, probably due to photoionization. We also conclude that an isothermal model of expansion better fits the data than an isentropic expansion model. Finally, we compared data obtained from Thomson scatter with those obtained by emission spectroscopy under similar conditions. The two sets of data have differences but are broadly consistent.

36 MATERIALS SCIENCE↗

Internal frequency conversion extreme ultraviolet interferometer using mutual coherence properties of two high-order-harmonic sources

We report on an innovative two-dimensional imaging extreme ultraviolet (XUV) interferometer operating at 32 nm based on the mutual coherence of two laser high order harmonics (HOH) sources, separately generated in gas. We give the first evidence that the two mutually coherent HOH sources can be produced in two independent spatially separated gas jets, allowing for probing centimeter-sized objects. A magnification factor of 10 leads to a micron resolution associated with a subpicosecond temporal resolution. Single shot interferograms with a fringe visibility better than 30% are routinely produced. As a test of the XUV interferometer, we measure a maximum electronic density of 3x10{sup 20} cm{sup -3} 1.1 ns after the creation of a plasma on aluminum target.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of C{sub 60} morphology on high-order harmonic generation enhancement in fullerene-containing plasma

The morphologies of the fullerene targets and the ablated fullerenes to determine the optimal conditions of excitation of the C{sub 60}-containing targets have been analyzed. The optimization of fullerene-containing plasma conditions allowed the enhanced harmonic generation in these plasmas using laser radiation of different wavelengths, pulse durations, and phase modulation. A comparison between the harmonic generation in single-atom/ion-containing plasmas (using bulk carbon, silver, and indium targets) and fullerene-rich plasma plumes showed better conversion efficiency for the latter medium. The influence of phase modulation of the fundamental radiation in fullerene plasmas on the spectral properties of harmonics has been studied.

36 MATERIALS SCIENCE↗

Nanoparticle plasma ejected directly from solid copper by localized microwaves

A plasma column ejected directly from solid copper by localized microwaves is studied. The effect stems from an induced hotspot that melts and emits ionized copper vapors as a confined fire column. Nanoparticles of {approx}20-120 nm size were revealed in the ejected column by in situ small-angle x-ray scattering. Optical spectroscopy confirmed the dominance of copper particles in the plasma column originating directly from the copper substrate. Nano- and macroparticles of copper were verified also by ex situ scanning electron microscopy. The direct conversion of solid metals to nanoparticles is demonstrated and various applications are proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Operation and upgrade of diagnostic neutral beam injector RUDI at TEXTOR tokamak

The status and the executing modernization of RUssian Diagnostic Injector (RUDI) are described. The ion source consists of arc plasma emitter and multiaperture four-electrode ion optical system. The present ion optical system with round beamlets is to be replaced by new slit apertures system for the reducing beam angular divergence in one direction. Due to enlarged dimensions and transparency of new ion optical system the extracted ion beam current will be by 50% increased. For the extension of beam pulse duration from 4 s to 8-10 s an optimized metal-ceramic arc-discharge channel is introduced. In the paper, the optical measurements results of beam parameters, including the profile of species distribution, scanned by custom-built multichannel spectroscope, are also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurements of the highest acceleration gradient for ions produced with a long laser pulse

Ultrafast plasma light ion streams have been produced using the 300 ps, kJ-class iodine laser, operating at PALS Centre in Prague. Ion detection was performed through standard ion collectors (IC) in time-of-flight configuration (TOF), shielded by thin metallic absorbers. This new diagnostics technique has been theoretically studied and experimentally tested in order to cut the long photopeak contribution and to analyze the ultrafast particle signal. Processing the obtained experimental IC-TOF data, including deconvolution processes of the TOF signals, UV/soft-x-ray photopeak absorption, and ion transmission calculations for different metallic filters, is shown. Mainly amorphous carbon (graphite) targets have been irradiated in order to limit the maximum number of ion charge states and to focus our study on demonstrating the validity of the proposed investigation technique. Maximum ion energy and acceleration gradient estimations as a function of the laser energy and focal spot diameter are reported.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Extremely broadened high-order harmonics generated by the femtosecond pulses propagating through the filaments in air

We demonstrate a considerable broadening of the harmonics generating in laser plasma using the laser pulses propagating through the filaments in air. A fourfold increase of harmonic bandwidth was achieved in the case of phase-modulated laser pulses, alongside with an increase in harmonic conversion efficiency (from 5x10{sup -6} to 1.2x10{sup -5}). We also present the studies of harmonic generation using phase-modulated pulses at different ranges of ellipticity of the polarization of laser beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of spot size on extreme ultraviolet efficiency of laser-produced Sn plasmas

We have investigated the spot size effects on the extreme ultraviolet conversion efficiency (CE) of CO{sub 2} laser-produced Sn plasmas. The estimated CE of the laser to 13.5 nm radiation, within a 2% bandwidth, using a 10.6 {mu}m CO{sub 2} laser with various pulse widths (25-55 ns) showed a double hump structure during a target-lens scan, where the CE is nearly 25% lower at the best focal position. Density analysis of the CO{sub 2} laser-produced plasma showed steep density gradients at the best focal position, and a reduction in CE at the best focal position, which is explained by the lack of efficient coupling between the laser and the plasma.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stopping power of a buffer gas for laser plasma debris mitigation

The stopping power of a buffer gas against laser-plasma debris is quantitatively assessed by means of visualization techniques. For ablation of planar tin targets in an Ar ambient, an expanding wavefront was visualized, whose translation energy was rapidly reduced within a few millimeters above the target surface. The fastest debris component was along the normal to the target with an initial kinetic energy of 1.1 keV. The buffer gas efficiency changed in a line-of-sight-dependent way, thermalizing more efficiently the on-axis components. The maximum stopping power of the gas buffer was determined as high as 0.4 keV/mm. Due to the reduction in stopping power, nonlinearly with the debris kinetic energy, a gas buffer thickness of 10 mm is required at the studied atmospheric pressure in order to mitigate high energy debris below a fiducial threshold of 0.1 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The study of helicon plasma source

Helicon plasma source is known as efficient generator of uniform and high density plasma. A helicon plasma source was developed for investigation of plasma neutralization and plasma lens in the Institute of Modern Physics in China. In this paper, the characteristics of helicon plasma have been studied by using Langmuir four-probe and a high argon plasma density up to 3.9x10{sup 13} cm{sup -3} have been achieved with the Nagoya type III antenna at the conditions of the magnetic intensity of 200 G, working gas pressure of 2.8x10{sup -3} Pa, and rf power of 1200 W with a frequency of 27.12 MHz. In the experiment, the important phenomena have been found: for a given magnetic induction intensity, the plasma density became greater with the increase in rf power and tended to saturation, and the helicon mode appeared at the rf power between 200 and 400 W.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗