Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DIFFUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Axial magnetic flux amplification in Hall-magnetohydrodynamic simulations of externally magnetized z-pinches

It is shown that externally magnetized gas-puff z-pinches under compression can exhibit robust axial flux amplification under suitable axial boundary conditions. This effect relies upon the Hall term in the generalized Ohm's law to generate azimuthal currents in the presence of a driving axial electric field. Under dynamic compression, the total current tends to flow in a mostly force-free boundary layer, separating the predominately azimuthal field outside the layer and the predominately axial field inside the layer. The effect only appears to occur if the axial boundaries allow for outflow or absorption of electromagnetic energy. The effect is mitigated by imposing either periodic or conducting axial boundary conditions. A semi-analytic equilibrium analysis agrees with steady-state solutions of the time-dependent electron-magnetohydrodynamic equations and provides an estimate of the scaling of the boundary layer as well as suggesting a scenario for the formation of the boundary layer. When operative, the effect can significantly impede plasma compression due to the increase in axial flux that diffuses into the pre-compressed plasma or through the presence of conductors that inhibit movement of the generated axial flux. Several facilities have noted unusual implosion behavior in z-pinch experiments with applied axial fields that does not appear to be explainable within the standard magnetohydrodynamic model. In conclusion, it is suggested that these experiments can be explained by the axial flux amplification and concentration effect

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ogo 6 measurements of supercooled plasma in the equatorial exosphere.

Plasma measurements performed on Ogo 6 reveal electron and ion temperature values that on occasion appear to be well below the expected neutral gas temperature. The phenomenon is observed only at night above 500 km near the magnetic equator. It is suggested that the expansion cooling of the plasma is accomplished by downward motions of the F region plasma induced by winds or diffusion, by outward E x B drift, or more probably by the upward flow of plasma during interhemisphere transport along magnetic field lines. It is also suggested that preferential cooling of electrons because of their greater thermal conductivity should tend to give ion temperatures greater than electron temperatures during the postsunset cooling of the plasmasphere when photoelectrons are absent.

Hanson, W. B.↗

Neutralization of beam-emitting spacecraft by plasma injection

An impulsive plasma injection has been used to study charge neutralization of the Space Shuttle Orbiter while it was emitting an electron beam into space. This investigation was performed by Space Experiments with Particle Accelerators on Spacelab-1. A plasma consisting of 10 to the 19th argon ion-electron pairs was injected into space for 1 ms while an electron beam was also being emitted into space. The electron beam energy and current were as high as 5 keV and 300 mA. While the orbiter potential was positive before the plasma injection and began to decrease during the plasma injection, it was near zero for 6 to 20 ms after the plasma injection. The recovery time to the initial level of charging varied from 10 to 100 ms. In a laboratory test in a large space chamber using the same flight hardware, the neutralization time was 8-17 ms and the recovery time was 11-20 ms. The long duration of the neutralization effect in space can be explained by a model of diffusion of the cold plasma which is produced near the Orbiter by charge exchange between the neutral argon atoms and the energetic argon ions during plasma injection.

Sasaki, S.↗

Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile

Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating (ECRH) and, in some cases, with low power of ECRH after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m −3 .

high performance plasma↗

The automated array assembly task of the low-cost silicon solar array project, phase 2

Several specific processing steps as part of a total process sequence for manufacturing silicon solar cells were studied. Ion implantation was identified as the preferred process step for impurity doping. Unanalyzed beam ion implantation was shown to have major cost advantages over analyzed beam implantation. Further, high quality cells were fabricated using a high current unanalyzed beam. Mechanically masked plasma patterning of silicon nitride was shown to be capable of forming fine lines on silicon surfaces with spacings between mask and substrate as great as 250 micrometers. Extensive work was performed on advances in plated metallization. The need for the thick electroless palladium layer was eliminated. Further, copper was successfully utilized as a conductor layer utilizing nickel as a barrier to copper diffusion into the silicon. Plasma etching of silicon for texturing and saw damage removal was shown technically feasible but not cost effective compared to wet chemical etching techniques.

Coleman, M. G.↗

Analytic model for coaxial helicity injection in tokamak plasmas

Using a partial differential equation for the time evolution of the mean-field poloidal magnetic flux that incorporates resistivity {eta} and hyper-resistivity {Lambda} terms, an exact analytic solution is obtained for steady-state coaxial helicity injection (CHI) in force-free large aspect ratio tokamaks. The analytic mean-field Ohm's law model allows for calculation of the tokamak CHI current drive efficiency and the plasma inductances at arbitrary levels of magnetic fluctuations, or dynamo activity. The results of the mean-field model suggest that CHI approaching Ohmic efficiency is only possible in tokamaks when the size of the effective current drive boundary layer, {delta}{identical_to}({Lambda}/{eta}){sup 1/2}, becomes greater than half the size of the plasma, {delta}>a/2, with a the plasma minor radius. The electron thermal diffusivity due to magnetic fluctuation induced transport is obtained from the expression {chi}{sub e}={Lambda}/{mu}{sub 0}d{sub e}{sup 2}, with {mu}{sub 0} the permeability of free space and d{sub e} the electron skin depth, which for typical tokamak fusion plasma parameters is on the order of a millimeter. Thus, the ratio of the energy confinement time to the resistive diffusion time in a tokamak plasma driven by steady-state CHI approaching Ohmic efficiency is shown to be constrained by the relation {tau}{sub E}/{tau}{sub {eta}}<(d{sub e}/a){sup 2}{approx_equal}10{sup -6}. The mean-field model suggests that steady-state CHI can be viewed most simply as a boundary layer of stochastically wandering magnetic field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE FERMI BUBBLES. II. THE POTENTIAL ROLES OF VISCOSITY AND COSMIC-RAY DIFFUSION IN JET MODELS

The origin of the Fermi bubbles recently detected by the Fermi Gamma-ray Space Telescope in the inner Galaxy is mysterious. In the companion paper Guo and Mathews (Paper I), we use hydrodynamic simulations to show that they could be produced by a recent powerful active galactic nucleus (AGN) jet event. Here, we further explore this scenario to study the potential roles of shear viscosity and cosmic-ray (CR) diffusion on the morphology and CR distribution of the bubbles. We show that even a relatively low level of viscosity ({mu}{sub visc} {approx}> 3 g cm{sup -1} s{sup -1}, or {approx}0.1%-1% of Braginskii viscosity in this context) could effectively suppress the development of Kelvin-Helmholtz instabilities at the bubble surface, resulting in smooth bubble edges as observed. Furthermore, viscosity reduces circulating motions within the bubbles, which would otherwise mix the CR-carrying jet backflow near bubble edges with the bubble interior. Thus viscosity naturally produces an edge-favored CR distribution, an important ingredient to produce the observed flat gamma-ray surface brightness distribution. Generically, such a CR distribution often produces a limb-brightened gamma-ray intensity distribution. However, we show that by incorporating CR diffusion that is strongly suppressed across the bubble surface (as inferred from sharp bubble edges) but is close to canonical values in the bubble interior, we obtain a reasonably flat gamma-ray intensity profile. The similarity of the resulting CR bubble with the observed Fermi bubbles strengthens our previous result in Paper I that the Fermi bubbles were produced by a recent AGN jet event. Studies of the nearby Fermi bubbles may provide a unique opportunity to study the potential roles of plasma viscosity and CR diffusion on the evolution of AGN jets and bubbles.

79 ASTRONOMY AND ASTROPHYSICS↗

Formation of a very thin current sheet in the near-earth magnetotail and the explosive growth phase of substorms

A magnetofricional method is used to construct two-dimensional MHD equilibria of the Earth's magnetosphere for a given distribution of entropy functions(S = pV(exp gamma), where p is the plasma pressure and V is the tube volume per unit magnetic flux. It is found that a very thin current sheet with B (sub zeta) is less than 0.5 nu T and thickness less than 1000 km can be formed in the near-earth magnetotail (x is approximately -8 to -20R(sub e) during the growth phase of substorm. The tail current sheets are found to become thinner as the entropy or the entropy gradient increases. It is suggested that the new entropy anti-diffusion instability associated with plasma transport across field lines leads to magnetic field dipolarization and accelerates the formation of thin current sheet, which may explain the observed explosive growth phase of substorms.

Lee, L. C.↗

Evolution of plasma loops in a semi-toroidal pinch experiment

The FlareLab experiment is a pulsed-power discharge generating magnetized plasma loops similar to a pinch experiment in a semi-toroidal configuration. After gas breakdown along a circular magnetic guide field, the structure expands in its major radius as the plasma becomes highly conductive and the discharge current rises. Photographs, current and electron density measurements reveal a significant broadening in the lateral direction leading to an increasing departure from radial symmetry of plasma parameters in the cross section. It is shown that the luminosity is related to both high electron density and high current density. Simultaneous measurements of current density and electric field reveal a high parallel resistivity of the plasma leading to fast diffusion across the magnetic field. Indications for anomalous resistivity are found by comparison with the Spitzer formula. As the experiment differs from a z-pinch experiment only by the semi-circular shape of the current path, the observed evolution is unexpected and might be of more fundamental significance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transverse diffusion of electrons in a magnetoplasma

Plasma density and temperature profiles were measured for plasma electrons which were generated by a plasma source and ionization from a 1 kev electron beam. Electron plasma parameters were measured with a cylindrical Langmuir probe which was moved perpendicular to the axis of the beam and field. Electron densities decreased exponentially from the beam center and the decay constant varied with magnetic field in accordance with the Bohm theory of cross field diffusion. This enhanced diffusion effect due to instabilities generated by the electron beam is orders of magnitude larger than that due to particle collisions.

Mcintyre, Bernard↗

The structure of 3-D collisional magnetized bow shocks in pulsed-power-driven plasma flows

Here we investigate three-dimensional (3-D) bow shocks in a highly collisional magnetized aluminium plasma, generated during the ablation phase of an exploding wire array on the MAGPIE facility (1.4 MA, 240 ns). Ablation of plasma from the wire array generates radially diverging, supersonic ($M_S$ $\sim 7$), super-Alfvénic ($M_A>1$) magnetized flows with frozen-in magnetic flux $(R_M\gg1)$. These flows collide with an inductive probe placed in the flow, which serves both as the obstacle that generates the magnetized bow shock, and as a diagnostic of the advected magnetic field. Laser interferometry along two orthogonal lines of sight is used to measure the line-integrated electron density. A detached bow shock forms ahead of the probe, with a larger opening angle in the plane parallel to the magnetic field than in the plane normal to it. Since the resistive diffusion length of the plasma is comparable to the probe size, the magnetic field decouples from the ion fluid at the shock front and generates a hydrodynamic shock, whose structure is determined by the sonic Mach number, rather than the magnetosonic Mach number of the flow. The 3-D simulations performed using the resistive magnetohydrodynamic (MHD) code Gorgon confirm this picture, but under-predict the anisotropy observed in the shape of the experimental bow shock, suggesting that non-MHD mechanisms may be important for modifying the shock structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Skin effect with arbitrary specularity in Maxwellian plasma

The problem of the skin effect with arbitrary specularity in Maxwellian plasma with specular-diffuse boundary conditions is solved. A new analytical method is developed that makes it possible to obtain a solution up to an arbitrary degree of accuracy. The method is based on the idea of symmetric continuation of not only the electric field, but also electron distribution function. The solution is obtained in a form of von Neumann series.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The physics of a single-event upset in integrated circuits: A review and critique of analytical models for charge collection

When an energetic particle (kinetic energy 0.5 MeV) originating from a radioactive decay or a cosmic ray transverse the active regions of semiconductor devices used in integrated circuit (IC) chips, it leaves along its track a high density electron hole plasma. The subsequent decay of this plasma by drift and diffusion leads to charge collection at the electrodes large enough in most cases to engender a false reading, hence the name single-event upset (SEU). The problem of SEU's is particularly severe within the harsh environment of Jupiter's radiation belts and constitutes therefore a matter of concern for the Galileo mission. The physics of an SEU event is analyzed in some detail. Owing to the predominance of nonlinear space charge effects and the fact that positive (holes) and negative (electrons) charges must be treated on an equal footing, analytical models for the ionized-charge collection and their corresponding currents as a function of time prove to be inadequate even in the simplest case of uniformly doped, abrupt p-n junctions in a one-dimensional geometry. The necessity for full-fledged computer simulation of the pertinent equations governing the electron-hole plasma therefore becomes imperative.

Vonroos, O.↗

Nitrogen mass transfer models for plasma-based low-energy ion implantation

The nitrogen mass transfer process in plasma-based low-energy ion implantation (PBLEII) is theoretically and experimentally studied in order to explore the process mechanism of PBLEII and therefore to optimize the apparatus design and the process conditions. An electron cyclotron resonance (ECR) microwave discharge generates the nitrogen plasma with a high density of 10{sup 11}–10{sup 12} ions/cm{sup 3}, which diffuses downstream to the process chamber along the divergent magnetic field. The nitrogen ions in the plasma implant into the surface and transport to the matrix of an austenitic stainless steel under the low negative pulsed bias of −2 kV at a process temperature of 400 °C. A global plasma model is used to simulate the ECR microwave plasma discharge for a range of working pressures and microwave powers. The fluid models are adopted to calculate the plasma downstream diffusion, the sheath expansion and the low-energy ion implantation on the surface. A nonlinear kinetic discrete model is established to describe the nitrogen transport in the austenitic stainless steel and the results are compared with the experimental measurements. Under an average implantation current density of 0.3–0.6 mA/cm{sup 2}, the surface nitrogen concentration in the range from 18.5 to 29 at. % is a critical factor for the nitrogen transport in the AISI 304 austenitic stainless steel by PBLEII, which accelerates the implanted nitrogen diffusion inward up to 6–12 μm during a nitriding time of 4 h.

36 MATERIALS SCIENCE↗

Current-Assisted Diffusion Bonding of Extruded Ti-22Al-25Nb Alloy by Spark Plasma Sintering: Interfacial Microstructure and Mechanical Properties

Spark plasma sintering (SPS) technology was used to current-assisted bond extruded Ti-22Al-25Nb alloy. The effects of bonding temperature (920-980 °C) and bonding time (10-30 min) on the microstructure evolution and shear strength of this alloy were investigated systematically. The temperature distribution in the specimen during the current-assisted bonding process was also analyzed by numerical simulation. It is noted that the highest temperature was obtained at the bonding interface. As the bonding temperature and bonding time increased, the voids in the interface shrank increasingly until they vanished. A complete metallurgical bonding interface could be produced at 960 °C/20 min/10 MPa, exhibiting the highest shear strength of 269.3 MPa. In addition, the shear strength of the bonded specimen depended on its interfacial microstructure. With increased bonding temperature, the fracture mode transformed from the intergranular fracture at the bonding interface to the cleavage fracture in the substrate.

36 MATERIALS SCIENCE↗

A reduced model of neutral-plasma interactions in the edge and scrape-off-layer: Verification comparisons with kinetic Monte Carlo simulations

The 2D scrape-off-layer turbulence code (SOLT) is extended to include neutral-plasma interactions. A Boltzmann equation is derived for the evolution of the bi-normally-averaged neutral distribution function, G( x ,vx,t), in the radial dimension, and this evolution is included in the new code (nSOLT). Neutral-plasma interactions are mediated by charge-exchange (CX) and ionization rates based on poloidally-averaged plasma density and temperature. Good agreement is obtained between asymptotically stationary neutral density profiles from nSOLT simulations and those previously obtained from the Monte Carlo neutral transport code DEGAS 2, for time-averaged NSTX H-mode plasma profiles. The sensitivity of the nSOLT neutral profiles to atomic physics parameters, with and without CX physics, is included in the comparison. In addition, nSOLT simulations that evolve the plasma in 1D, using radial diffusion as a proxy for turbulent (blob) transport, illustrate the convergence to a self-consistent neutral-plasma equilibrium sustained by a neutral source at the far-SOL boundary and plasma heating in the core; equilibria consistent with typical NSTX Ohmic L-mode plasmas are described.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simple model of plasma acceleration in a magnetic nozzle

A collisionless, steady-state, cold-plasma model is used to calculate the three-dimensional trajectory of a plasma as it is accelerated through a diverging magnetic field. The magnetic field is assumed to be axisymmetric with nonzero radial and axial components and zero azimuthal component. Although random thermal motion of plasma species is neglected in the cold plasma approximation, an important effect of plasma thermal energy is accounted for in the model as the kinetic energy of electrons in their Larmor motion about magnetic field lines. Calculations based on this model confirm previous studies which suggested that plasma separation from the field of a magnetic nozzle can take place even in the absence of collisional diffusion. It is shown that plasma divergence in a magnetic nozzle can be controlled by tailoring the field geometry.

Sercel, Joel C.↗

Narrow gap electronegative capacitive discharges

Narrow gap electronegative (EN) capacitive discharges are widely used in industry and have unique features not found in conventional discharges. In this paper, plasma parameters are determined over a range of decreasing gap length L from values for which an electropositive (EP) edge exists (2-region case) to smaller L-values for which the EN region connects directly to the sheath (1-region case). Parametric studies are performed at applied voltage V{sub rf}=500 V for pressures of 10, 25, 50, and 100 mTorr, and additionally at 50 mTorr for 1000 and 2000 V. Numerical results are given for a parallel plate oxygen discharge using a planar 1D3v (1 spatial dimension, 3 velocity components) particle-in-cell (PIC) code. New interesting phenomena are found for the case in which an EP edge does not exist. This 1-region case has not previously been investigated in detail, either numerically or analytically. In particular, attachment in the sheaths is important, and the central electron density n{sub e0} is depressed below the density n{sub esh} at the sheath edge. The sheath oscillations also extend into the EN core, creating an edge region lying within the sheath and not characterized by the standard diffusion in an EN plasma. An analytical model is developed using minimal inputs from the PIC results, and compared to the PIC results for a base case at V{sub rf}=500 V and 50 mTorr, showing good agreement. Selected comparisons are made at the other voltages and pressures. A self-consistent model is also developed and compared to the PIC results, giving reasonable agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗