Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Imprint control of BaTiO 3 thin films via chemically induced surface polarization pinning

Surface-adsorbed polar molecules can significantly alter the ferroelectric properties of oxide thin films. Thus, fundamental understanding and controlling the effect of surface adsorbates are crucial for the implementation of ferroelectric thin film devices, such as ferroelectric tunnel junctions. Herein, we report an imprint control of BaTiO 3 (BTO) thin films by chemically induced surface polarization pinning in the top few atomic layers of the water-exposed BTO films. Our studies based on synchrotron X-ray scattering and coherent Bragg rod analysis demonstrate that the chemically induced surface polarization is not switchable but reduces the polarization imprint and improves the bistability of ferroelectric phase in BTO tunnel junctions. Here, we conclude that the chemical treatment of ferroelectric thin films with polar molecules may serve as a simple yet powerful strategy to enhance functional properties of ferroelectric tunnel junctions for their practical applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strongly enhanced flux pinning in one-step deposition of BaFe 2 (As 0.66 P 0.33 ) 2 superconductor films with uniformly dispersed BaZrO 3 nanoparticles

The high upper critical field and low anisotropy of the iron-based superconductor BaFe 2 As 2 make it promising for its use in the construction of superconducting magnets. However, its critical current density in high magnetic fields needs to be improved. Here we demonstrate a simple, one-step and industrially scalable means of achieving just this. We show that introducing controlled amounts of uniformly dispersed BaZrO 3 nanoparticles into carrier doped BaFe 2 As 2 significantly improves its superconducting performance without degrading its structural or superconducting properties. Our BaFe 2 (As 0.66 P 0.33 ) 2 films also exhibit an increase in both the irreversibility line and critical current density at all magnetic-field orientations. These films exhibit nearly isotropic critical current densities in excess of 1.5 MA cm –2 at 15 K and 1 T—seven times higher than previously reported for BaFe 2 As 2 films. The vortex-pinning force in these films reaches ~59 GN m –3 at 5 K and 3–9 T, substantially higher than that of the conventional Nb 3 Sn wire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pinning ångström-size solid ionic channels for rare-earth element separation

High-purity rare-earth elements are essential for modern technologies, yet current solvent extraction processes are energy-intensive and environmentally harmful because of inadequate selectivity and ligand toxicity. Although combining size exclusion and binding affinity can improve lanthanide separation, the role of long-range confinement remains underexplored. Here we report lanthanide separation in aqueous systems using extremely confined manganese oxide solid ionic channels with optimized layer spacing. Different lanthanides induce distinct solid-state phase transformations in manganese oxide, creating a strong driving force for separation. Two lanthanide groups, differing by ~1.4 Å in spacing, were identified and confirmed to be stable by density functional theory. The narrower confinement of heavier Group II lanthanides improves cross-group separation by increasing the dehydration barrier for lighter Group I lanthanides without inducing strong binding. Here, we further developed a strategy to pin the confinement dimensions and enhance same-group separation, increasing enrichment factors for La–Nd and La–Pr pairs from 1.6 ± 0.1 and 1.5 ± 0.1 to 5.4 ± 0.1 and 4.2 ± 0.1, respectively.

Chemical engineering↗

Dynamic phases, pinning, and pattern formation for driven dislocation assemblies

We examine driven dislocation assemblies and show that they can exhibit a set of dynamical phases remarkably similar to those of driven systems with quenched disorder such as vortices in superconductors, magnetic domain walls, and charge density wave materials. These phases include pinned-jammed, fluctuating, and dynamically ordered states, and each produces distinct dislocation patterns as well as specific features in the noise fluctuations and transport properties. Lastly, our work suggests that many of the results established for systems with quenched disorder undergoing plastic depinning transitions can be applied to dislocation systems, providing a new approach for understanding pattern formation and dynamics in these systems.

36 MATERIALS SCIENCE↗

Geometrical Vortex Lattice Pinning and Melting in YBaCuO Submicron Bridges.

Since the discovery of high-temperature superconductors (HTSs), most efforts of researchers have been focused on the fabrication of superconducting devices capable of immobilizing vortices, hence of operating at enhanced temperatures and magnetic fields. Recent findings that geometric restrictions may induce self-arresting hypervortices recovering the dissipation-free state at high fields and temperatures made superconducting strips a mainstream of superconductivity studies. Here in this paper we report on the geometrical melting of the vortex lattice in a wide YBCO submicron bridge preceded by magnetoresistance (MR) oscillations fingerprinting the underlying regular vortex structure. Combined magnetoresistance measurements and numerical simulations unambiguously relate the resistance oscillations to the penetration of vortex rows with intermediate geometrical pinning and uncover the details of geometrical melting. Our findings offer a reliable and reproducible pathway for controlling vortices in geometrically restricted nanodevices and introduce a novel technique of geometrical spectroscopy, inferring detailed information of the structure of the vortex system through a combined use of MR curves and large-scale simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Destructive reverse bias pinning in perovskite/silicon tandem solar modules caused by perovskite hysteresis under dynamic shading

In this work, we demonstrate how perovskite hysteresis can result in permanent reductions in power output in perovskite/silicon tandem modules—including irreversible hotspot-induced damage—from only brief periods of shading. We show that reverse bias events in which a perovskite cell is biased above a threshold voltage—which in this work we find to be as low as –1.1 V—produces a temporary reduction in power output that is of sufficient magnitude to keep the cell pinned in reverse bias after the shading event ends. As a hysteretic phenomena, this crucial failure mode may be overlooked by static models of perovskite-based solar cells. Higher reverse bias voltages exacerbate the temporary reduction in short-circuit photocurrent, which is also sensitive to the level of illumination under reverse bias. Numerical device modelling demonstrates that this effect is consistent with our understanding of perovskite hysteresis as a consequence of mobile ion-electron coupling controlling rates of non-radiative recombination over time. Measurements of the dynamic response of single-junction perovskite cells are extrapolated to two-terminal and four-terminal perovskite/silicon tandem module modelling. We validate these models with measurements from an equivalent electronic circuit that represents a two-terminal perovskite–silicon tandem mini module. Two module-level solutions are discussed that address this issue, which includes increasing the number of bypass diodes and choosing better suited silicon bottom cells with higher shunter resistance in two-terminal tandem modules.

14 SOLAR ENERGY↗

Pinning dislocations in colloidal crystals with active particles that seek stacking faults

There is growing interest in functional, adaptive devices built from colloidal subunits of micron size or smaller. A colloidal material with dynamic mechanical properties could facilitate such microrobotic machines. Here we study via computer simulation how active interstitial particles in small quantities can be used to modify the bulk mechanical properties of a colloidal crystal. Passive interstitial particles are known to pin dislocations in metals, thereby increasing resistance to plastic deformation. We extend this tactic by employing anisotropic active interstitials that travel super-diffusively and bind strongly to stacking faults associated with partial dislocations. We find that: (1) interstitials that are effective at reducing plasticity compromise between strong binding to stacking faults and high mobility in the crystal bulk. (2) Reorientation of active interstitials in the crystal depends upon rotational transitions between high-symmetry crystal directions. (3) The addition of certain active interstitial shapes at concentrations as low as 60 per million host particles (0.006%) can create a shear threshold for dislocation migration. This work demonstrates how active materials in a dense matrix can locally sense their environment and lead to bulk property changes.

36 MATERIALS SCIENCE↗

Nonsuperconducting Micron Size Particle as Effective Pinning Centre for Enhanced J{sub c} in High-T{sub c} Superconductors

Understanding the real mechanism responsible for achieving high transport critical current density (J{sub c}) in the high temperature (high-T{sub c}) cuprate superconductors has been one of the primary goal. The only promising way is to tailor the high-Tc cuprate material during preparation stage incorporating suitable non-superconducting particles within superconducting matrix, which are known to serve as effective pining centers. Incorporation of non-superconducting particle like silver with dimension down to micron/submicron size in the superconducting matrix is very stable and form a homogenous solid solution matrix, which has got the better stability on aging and found to be effective in enhancing flux pining in high-Tc superconducting system. In this paper, studies have been made to investigate and review the effect of non-superconducting micron size Ag particle in to the matrix of RE-Ba-Cu-O (RE = Sm, Gd and Y) 123 high-Tc ceramic superconducting system. XRD, SEM, magnetization, magnetotransport and microwave induce DC voltage measurements were carried out to study the effect of Ag into 123-superconducting system. It is observed that controlled addition of Ag into Sm-Ba-Cu-O (SBCO), Gd-Ba-Cu-O (GBCO) and Y-Ba-Cu-O (YBCO) ceramic superconductor do not react with the decomposed phases but remains in the metallic form. This brings about a lowering of the normal-state resistivity. The increase of magnetic critical current density (Jmc), transport critical current density (Jtc), and, hence pinning force density (Fp) with Ag addition into above three systems suggest the creation of an SNS-type proximity junction at the intergranular region and stronger Josephson current paths between the superconducting intergrains. This is attributed to the physical densification and consequent reduction of the total number of weak links by Ag addition into the above mentioned ceramic superconducting system.

36 MATERIALS SCIENCE↗

Enhanced flux pinning by BaZrO3 and (Gd,y)2O3 nano-structures in metal organic chemical vapor deposited GdYBCO high temperature superconductor tapes

We have formed BaZrO3 nano-columns and (Gd,Y)2O3 nano-precipitates in reel-to-reel MOCVD processed (Gd,Y)Ba2Cu3O7-x coated conductors and increased the critical currents (Ic) of the conductors in applied magnetic fields to remarkable levels. A (Gd,Y)Ba2Cu3O7-x tape of 1m length with 6.5% Zr-additions and 30% composition rich in both Gd and Y showed Ic values of 813 A/cm-width at (self-field, 77K) and above 186 A/cm-width at (1T, 77K). The strongly enhanced flux pinning over a wide range of magnetic field orientations can be attributed to the bidirectionally aligned defect structures of BaZrO3 and (Gd,Y)2O3 created by optimized MOCVD conditions.

36 MATERIALS SCIENCE↗

Flux-Pinning Centers In Metal-Organic Deposited YBCO Coated Conductors

We present our recent results in introducing artificial flux-pinning centers in metal-organic deposited YBa{sub 2}Cu{sub 3}O{sub 7} coated conductors. In particular, we describe methods for creating point-like and planar defects through precursor and process modifications, and linear defects using post-process heavy-ion irradiation. We observe these defects through transmission-electron microscopy. Each type of defect contributes a particular critical-current signature and combinations of defects can be used to tailor the superconductor for specific applications.

36 MATERIALS SCIENCE↗

THE PUZZLE OF TWO DIFFERENT SUB-MICROMETER TUNGSTEN-RICH DEPOSITS IN BULK YBCO: ONE ACTS AS PINNING CENTERS AND THE OTHER DOES NOT

Two types of large grain YBCO samples doped with tungsten oxide, one with platinum and the other without, were produced using a slow cooling process. Observations of the trapped magnetic flux density showed that the flux density of the W-doped, Pt-free samples did not change with W doping levels of up to 2.1 mol%. In contrast, the (W+Pt)-doped samples resulted in a monotonic improvement in trapped magnetic flux density as a function of W doping. Microstructure studies indicate that both types of samples contain profuse sub-micrometer deposits of a W-rich compound. The Pt-free samples contain (W{sub 0.4}Y{sub 0.6})BaO{sub 3} deposits while the (W+Pt)-doped samples contain deposits of a (W{sub 0.5}Pt{sub 0.5})YBa{sub 2}O{sub 6} compound. Both types of deposits are of essentially the same size and have comparable number density. The results are strikingly similar to an earlier experiment in which uranium doped, Pt-free, large grain YBCO also did not show any improvement in trapped magnetic flux density. The U-doped, Pt-free samples contain profuse sub-micrometer deposits of a (U{sub 0.4}Y{sub 0.6})BaO{sub 3} compound, which have been shown to be ferromagnetic. The inability of both the (W{sub 0.4}Y{sub 0.6})BaO{sub 3} and (U{sub 0.4}Y{sub 0.6})BaO{sub 3} sub-micrometer deposits to act as pinning centers in self-field, suggest that this behavior is systematic.

36 MATERIALS SCIENCE↗

Tunable work function of a WO{sub x} buffer layer for enhanced photocarrier collection of pin-type amorphous silicon solar cells

An in situ postdeposition ultraviolet treatment was proposed to improve the electrical properties of a tungsten oxide (WO{sub x}) buffer layer of pin-type amorphous silicon-based solar cell. Based on the x-ray and ultraviolet photoelectron spectroscopy and the activation energy measurements, it was found that the work function of WO{sub x} is tunable by ultraviolet light treatment, and the collection performance of solar cells incorporating WO{sub x} with the lower work function is further improved. Moreover, the optimal band alignment scheme for a window layer is discussed in terms of obtaining enhanced carrier collection without open circuit voltage degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi level de-pinning of aluminium contacts to n-type germanium using thin atomic layer deposited layers

Fermi-level pinning of aluminium on n-type germanium (n-Ge) was reduced by insertion of a thin interfacial dielectric by atomic layer deposition. The barrier height for aluminium contacts on n-Ge was reduced from 0.7 eV to a value of 0.28 eV for a thin Al{sub 2}O{sub 3} interfacial layer (∼2.8 nm). For diodes with an Al{sub 2}O{sub 3} interfacial layer, the contact resistance started to increase for layer thicknesses above 2.8 nm. For diodes with a HfO{sub 2} interfacial layer, the barrier height was also reduced but the contact resistance increased dramatically for layer thicknesses above 1.5 nm.

36 MATERIALS SCIENCE↗

Current-induced switching of magnetic tunnel junctions: Effects of field-like spin-transfer torque, pinned-layer magnetization orientation, and temperature

We study current-induced switching in magnetic tunnel junctions in the presence of a field-like spin-transfer torque and titled pinned-layer magnetization in the high current limit at finite temperature. We consider both the Slonczewski and field-like torques with coefficients a{sub J} and b{sub J}, respectively. At finite temperatures, σ=b{sub J}/a{sub J}=±1 leads to a smaller mean switching time compared that with σ=0. The reduction of switching time in the presence of the field-like term is due to the alignment effect (for σ>0) and the initial torque effect.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermi level pinning and the charge transfer contribution to the energy of adsorption at semiconducting surfaces

It is shown that charge transfer, the process analogous to formation of semiconductor p-n junction, contributes significantly to adsorption energy at semiconductor surfaces. For the processes without the charge transfer, such as molecular adsorption of closed shell systems, the adsorption energy is determined by the bonding only. In the case involving charge transfer, such as open shell systems like metal atoms or the dissociating molecules, the energy attains different value for the Fermi level differently pinned. The Density Functional Theory (DFT) simulation of species adsorption at different surfaces, such as SiC(0001) or GaN(0001) confirms these predictions: the molecular adsorption is independent on the coverage, while the dissociative process adsorption energy varies by several electronvolts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Linear nanometric tunnel junction sensors with exchange pinned sensing layer

Highly sensitive nanosensors with high spatial resolution provide the necessary features for high accuracy imaging of isolated magnetic nanoparticles. In this work, we report the fabrication and characterization of MgO-barrier magnetic tunnel junction nanosensors, with two exchange-pinned electrodes. The perpendicular magnetization configuration for field sensing is set using a two-step annealing process, where the second annealing temperature was optimized to yield patterned sensors responses with improved linearity. The optimized circular nanosensors show sensitivities up to 0.1%/Oe, larger than previously reported for nanometric sensors and comparable to micrometric spin-valves. Our strategy avoids the use of external permanent biasing or demagnetizing fields (large for smaller structures) to achieve a linear response, enabling the control of the linear operation range using only the stack and thus providing a small footprint device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi level pinning in Fe-doped PbTe under pressure

We synthesize an iron-doped PbTe single-crystal ingot and investigate the phase and the elemental composition as well as galvanomagnetic properties in weak magnetic fields (4.2 K≤T≤300 K, B ≤ 0.07 T) of Pb{sub 1−y}Fe{sub y}Te alloys upon varying the iron content, at atmospheric pressure and under hydrostatic compression up to 10 kilobars. We find an increase of iron concentration along the length of the ingot and the appearance of microscopic inclusions enriched with iron in the heavily doped samples. Lightly doped alloys are characterized by the p-type metal conductivity. An increase of the iron impurity content leads to a decrease in the free hole concentration, a stabilization of galvanomagnetic parameters, indicating the pinning of the Fermi energy by the iron resonant impurity level lying under the bottom of the valence band, and to the p-n inversion of the conductivity type. Under pressure, the free hole concentration in the sample, in which the stabilization of galvanomagnetic parameters takes place, increases by approximately a factor of four due to the flow of electrons from the valence band to the iron-induced resonant level. Using the two-band Kane and the six-band Dimmock dispersion relations, the pressure dependence of the Fermi energy is calculated. The model of the electronic structure rearrangement of Pb{sub 1−y}Fe{sub y}Te under pressure is proposed. The energy position and the pressure coefficient of the resonant iron impurity level are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cooperative spin freezing and the pinning assisted thermoremanent magnetization in Ni{sub 2.04}Mn{sub 1.36}Sn{sub 0.6} alloy

Detailed investigation on the ground-state magnetic properties of Ni{sub 2.04}Mn{sub 1.36}Sn{sub 0.6} alloy is reported. The sample undergoes martensitic type structural transformation from a cubic austenite phase to an orthorhombic martensite phase on cooling around T{sub M} = 220 K. It orders ferromagnetically just above room temperature with T{sub C} = 310 K. The phases above and below T{sub M} are predominantly ferromagnetic, although incipient antiferromagnetic correlations have been mooted between the Mn atoms sitting at two different crystallographic sites. The zero-field-cooled magnetic state shows a step like anomaly around T{sub B} = 100 K, and the sample is found to show clear signature of spin glass like behaviour below this point. It is also associated with considerable exchange bias effect below T{sub B}, where horizontal shift of isothermal magnetization loop is observed in the field-cooled state. Apart from exchange bias, there exists large thermoremanent magnetization. Interestingly, the thermoremanent magnetization obtained by cooling the sample from above and just below the first order martensitic transition failed to show any sizable change, which rules out any major role of field induced arrest across the first order transition. The observed thermoremanent magnetization is presumably due to the effect of pinning of uncompensated spins in this magnetically inhomogeneous system with random ferromagnetic as well as antiferromagnetic bonds on field cooling through the onset point (T{sub B}) of the spin-glass like state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗