Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTOELECTRICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Solvothermal synthesis and high optical performance of three-dimensional sea-urchin-like TiO{sub 2}

Graphical abstract: I–V characteristics of different TiO{sub 2} microspheres based DSSCs (a) 3D sphere-like, (b) 3D flower-like, (c) 3D sea-urchin-like. - Highlights: • 3D sea-urchin-like TiO{sub 2} was synthesized by solvothermal method. • The effects of preparation parameters on the microstructure of the microspheres were investigated. • The photoelectric properties of 3D sea-urchin-like TiO{sub 2} were studied upon DSSCs. • The PCE of the 3D sea-urchin-like TiO{sub 2} was higher than that of other morphologies. - Abstract: Three-dimensional (3D) sea-urchin-like TiO{sub 2} microspheres were successfully synthesised by solvothermal method. The effects of preparation parameters including reaction temperature, concentration and mass fraction of precursor, and solvent volume on the microstructure of the microspheres were investigated. Results of scanning electron microscopy showed that the preparation parameters played a critical role in the morphology of 3D sea-urchin-like TiO{sub 2}. In addition, when the sea-urchin-like TiO{sub 2} nanostructures were used as the dye-sensitized solar cells (DSSCs) anode, the power-conversion efficiency was higher than that of other morphologies, which was due to the special 3D hierarchical nanostructure, large specific surface area, and enhanced absorption of UV–vis of the TiO{sub 2} nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mesoporous palladium–copper ferrites as highly efficient and magnetically separable catalysts for Suzuki coupling reaction

Highlights: • Mesoporous Cu–Pd ferrites were prepared by a facile, mild and environment-friendly route. • The catalysts have shown great efficiencies in Suzuki coupling reaction and up to 36.9 × 10{sup 3} h{sup −1} TOF can be obtained. • The catalyst can be magnetically separated easily and have shown prominent recyclability. - Abstract: Mesoporous Cu–Pd ferrites were prepared by using MCM-41 and SBA-15 mesoporous molecular sieves as hard templates and well characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), ICP-atomic emission spectroscopy, N{sub 2} adsorption–desorption and X-ray photoelectric spectroscopy (XPS). Compared with samples prepared by the sol–gel auto-combustion methods, the as-prepared mesoporous ferrites have shown uniform pore size and much higher specific surface areas. The samples showed a remarkably high activity in connection with the Suzuki coupling reaction, especially Cu{sub 0.99}Pd{sub 0.01}Fe{sub 2}O{sub 4} prepared by using MCM-41 as template obtained an excellent TOF as high as 36.9 × 10{sup 3} h{sup −1} and no obvious decrease in the activity was observed after ten consecutive runs.

36 MATERIALS SCIENCE↗

Enhancing photovoltaic performance of dye-sensitized solar cells by rare-earth doped oxide of SrAl{sub 2}O{sub 4}:Eu{sup 3+}

Graphical abstract: Current–voltage characteristics of DSSCs based on the photoanodes doping different SrAl{sub 2}O{sub 4}:Eu{sup 3+} and doping 3% SrAl{sub 2}O{sub 4}. - Highlights: • A down-conversion (DC) nanocrystal (SrAl{sub 2}O{sub 4}:Eu{sup 3+}) was synthesized. • The effect of SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode in DSSCs was investigated. • SrAl{sub 2}O{sub 4}:Eu{sup 3+} doped in photoanode appeared the better photovoltaic performances. • The dual function of DC and p-type doping effect were explained. - Abstract: SrAl{sub 2}O{sub 4}:Eu{sup 3+} down-conversion (DC) nanocrystals were synthesized by a sol–gel method and then doped in TiO{sub 2} as a photoanode in dye-sensitized solar cells (DSSCs). Differential thermal analysis, fourier transform infrared spectroscopy, X-ray diffraction and Brunauer–Emmet–Teller analysis confirmed the formation of SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals with diameters of ∼47 nm, pore size of ∼25 nm, sintering temperature of 1300 °C. The photoluminescence and UV–vis absorption spectra of the SrAl{sub 2}O{sub 4}:Eu{sup 3+} revealed a DC from ultraviolet light to visible light which matched the strong absorbing region of the N719 dye. The photoelectric conversion efficiency of the DSSCs with a TiO{sub 2} photoanode doped with 3 wt% SrAl{sub 2}O{sub 4}:Eu{sup 3+} was 20% higher than that with a pure TiO{sub 2} photoanode. This phenomenon could be mainly explained by SrAl{sub 2}O{sub 4}:Eu{sup 3+} nanocrystals’ ability of DC and increased the short-circuit current density. It could be minorly due to the p-type doping effect and slightly improved the open-circuit voltage.

36 MATERIALS SCIENCE↗

A simple method to fabricate an NIR detector by PbTe nanowires in a large scale

Highlights: • PbTe nanowires were grown by tellurization of the Pb sheets for the first time. • It was observed a band gap value for the PbTe nanostructures in the NIR region. • NIR detector was fabricated in a large scale using a simple method. • Effect of Te concentration on morphology of PbTe nanostructures was investigated. - Abstract: A simple method was used to fabricate a near-infrared (NIR) detector using PbTe nanostructures. Samples were synthesized by tellurization of lead sheets in a tube furnace. PbTe nanostructures with wires and flakes shapes were grown on the lead sheets that were placed at 300 and 330 °C, respectively, while, PbTe nanoporous were grown at 360 and 390 °C. X-ray diffraction patterns and X-ray photoelectron spectra results indicated that, the PbTe phase was formed in all samples. UV–vis diffuse reflectance spectra measurements showed a band gap for the PbTe nanostructures in the near-infrared region of the electromagnetic spectrum. Actually, the results indicated that, the band gap values of the PbTe nanowires and nanoporous were 1.54 eV and 1.61 eV, respectively. Finally, the PbTe nanostructures were used as a simple photoresponse device under a red light source. The photoresponse results revealed, PbTe nanowires are promising for photoelectrical applications in the NIR region.

36 MATERIALS SCIENCE↗

Large-scale synthesis of Bi2S3 nanorods and nanoflowers for flexible near-infrared laser detectors and visible light photodetectors

Highlights: • Bi{sub 2}S{sub 3} nanorods and nanoflowers flexible laser detectors have been fabricated successfully. • The photoelectric properties were studied upon 808 nm and 980 nm laser beam irradiation. • Bi{sub 2}S{sub 3} nanorods flexible photodetector exhibits higher LDR value than other Bi{sub 2}S{sub 3} based photodetectors. - Abstract: Rod-like and flower-like bismuth sulphide semiconductor nanomaterials were large-scale synthesized and applied for flexible near-infrared laser detectors and visible light photodetectors. The nanorod-based flexible laser detectors have high photoresponse characteristics to 808 nm and 980 nm laser light, and their switching ratio were calculated to be 9.2 and 23.6 times, respectively. The flexible laser detectors exhibit good linear current characteristics, photo-sensitivity dependence of light intensity. Especially, the flexible nanorod-based photodetector has high LDR (linear dynamic range) value of 19.60 dB. Furthermore, the Bi{sub 2}S{sub 3} nanorods based visible light photodetector exhibits higher LDR value than other Bi{sub 2}S{sub 3} based photodetectors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Low cost and facile fabrication of broadband laser power meter based on reduced graphene oxide film

Highlights: • The reduced graphene oxide film is used to fabricate the low cost laser powermeter. • The photoresponse of the device is explored in the visible to near-infrared range. • The photoresponse of the device is linearly related to the irradiated laser power. • The photoelectric current of the device does not depend on the laser spot size. - Abstract: Here, we have demonstrated a new type of broadband reduced graphene oxide-based laser power meter in simple and low cost method. The broadband photosensitivity of the device is confirmed by photocurrent measurements at different incident laser wavelengths of 405, 532, 635 and 808 nm. It is shown that its photocurrent increases linearly with increasing the power of the laser beam. Also, it is observed that the photocurrent behavior of the device does not depend upon the size of the laser spot. It should be noted that the reduced graphene oxide power meter is the thermal detection device. Therefore, the response of the sample in the vacuum is greatly enhanced in compared to the environmental air. Cooling system can also decrease the time required for the establishment of thermal equilibrium and thus reduce the response time of the power meter. These results open up exciting opportunities for developing broadband photodetectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical bath deposition of single crystal SnS nanobelts on glass substrates

Highlights: • Single crystal SnS nanobelts were deposited by CBD method. • The morphologies of SnS nanobelts were regulated by mole ratios of precursors and pH levels. • The photo-electrical properties of SnS nanobelts were characterized. - Abstract: SnS nanobelt thin films were deposited on glass substrates in acidic solution by chemical bath deposition (CBD) method. The belt-like morphologies of as-deposited SnS thin films were characterized by scanning electron microscope (SEM) and transmission electron microscopy (TEM). X-ray diffraction (XRD) and Raman measurements were carried out to confirm the crystal structures and phase purities of SnS nanobelt thin films. The morphologies and phase purities of SnS thin films were influenced greatly by the tin and sulfur precursors. The bandgaps of SnS nanobelts were determined to be 1.39–1.41 eV by UV–vis absorption and photoluminescence (PL) spectra. Current-voltage ((IV)) and current-time ((I-T)) characteristics were studied to demonstrate the photoelectric performances of SnS nanobelt thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

PPV derivative/ZnO nanorods heterojunction: Fabrication, Characterization and Near-UV light sensor development

Highlights: • We have fabricated a PPV-C6/ZnO NRs heterojunction by a simple and low cost method. • We have studied the structural and optical properties of the heterojunction. • I–V characteristics of EGa-In/Si/PPV-C6/ ZnO NRs /graphite devices were analyzed. • Photoelectrical study shows a potential opportunity for UV light sensor development. - Abstract: Poly(1,4-phenylenevinylene) derivative (PPV-C{sub 6}) based solution was spin-coated onto hydrothermally grown and vertically aligned ZnO nanorods (ZnO NRs).The morphological and the optical properties of the PPV-C{sub 6}/ZnO NRs hybrid heterojunction have been studied and shown a penetration of PPV-C{sub 6}into the interspaces between the ZnO NRs with enhanced excitonic dissociation. The current–voltage characteristics in dark and under 395 nm LED illumination have been analyzed. A short-circuit current J{sub sc} of 4691.42 μA/cm{sup 2}, an open-circuit voltage V{sub oc} of 0.46 V giving rise to a responsivity of about 29.32 mA/W have been obtained for the illuminated graphite/PPV-C6/ZnO NRs/Si/EGa-In structure based near UV light sensor showing an enhanced responsivity by a factor of about 200 compared with bare ZnO NRs based one. We have succeeded in the development of low cost near-UV light sensors by simple low temperature hydrothermal method using eco-friendly, low cost and easily fabricated electrodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The core-shell-structured NaYF4:Er3+,Yb3+@NaYF4:Eu3+ nanocrystals as dual-mode and multifunctional luminescent mechanism for high-performance dye-sensitized solar cells

Highlights: • NaYF{sub 4}:Er{sup 3+},Yb{sup 3+}@NaYF{sub 4}:Eu{sup 3+} nanocrystals have been successfully prepared. • Higher quality NYFEY@NYFE with dual-mode emission was demonstrated. • The conversion efficiency of the DSSCs with NYFEY@NYFE reaches 7.37%. • Up-conversion luminescence was completed by Er{sup 3+} ions from infrared to visible light. • Down-conversion luminescence was fulfilled by Eu{sup 3+} ions from ultraviolet to visible light. - Abstract: The core-shell-structured NaYF{sub 4}:Er{sup 3+},Yb{sup 3+}@NaYF{sub 4}:Eu{sup 3+} (NYFEY@NYFE) nanocrystals with dual-mode emission have been satisfactorily prepared through a solvothermal method utilizing oleic acid and octadecene. From the emission spectra of dual-mode luminescent nanocrystals, it could be seen that nanocrystals consisted of two disparate units, one supplying up-converting luminescence excited with the 980 nm laser and the other providing down-converting luminescence by means of ultraviolet excitation, which are assigned to {sup 4}S{sub (3/2)} → {sup 4}I{sub (15/2)} transitions of Er{sup 3+} and {sup 5}D{sub 0} → {sup 7}F{sub 2} transitions of Eu{sup 3+}, separately. And then, a novel photoelectrode structure via introducing dual-mode luminescent materials was proposed. The photoelectric conversion efficiency of DSSCs with NYFEY@NYFE photoelectrode attains 7.37%, raised by a factor of 1.37 in comparison to that of the DSSCs without Eu{sup 3+} and Er{sup 3+} doping. The preparation of dual-mode NYFEY@NYFE not only has great significance to the study of material itself but its application in DSSCs, and can be also applied to other types of solar cells.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of dislocation configurations in SiC crystals through X-ray topography aided by ray tracing simulations

Silicon carbide as a wide bandgap semiconductor is of great research interest for its widespread deployment in a range of electronic and optoelectronic devices, particularly in power electronics. However, defects in silicon carbide crystals are still major concerns that is hampering the development of high-performance devices. X-ray topography, particularly using the synchrotron beam has been instrumental in characterizing and analyzing defect configurations in silicon carbide crystals to optimize crystal growth as well as understand the effect of defects on device performance. Here, in recent years, the use of ray-tracing simulation technique based on the orientation contrast mechanism to simulate contrast of defects observed on actual X-ray topographs has proven to be an effective approach to investigate the nature of crystallographic defects in various semiconductors. This review discusses the principle of ray-tracing simulation and its application and modifications to incorporate the effects of surface relaxation and photoelectric absorption to better simulate different dislocations observed in 4H–SiC as well as 6H–SiC crystals of various orientations. The adaptation to weak beam topography and plane wave topography is also discussed. The application of ray-tracing simulation in dislocation characterization of silicon carbide of different polytypes is systematically reviewed including different types of dislocations observed in both off-axis wafers and axial-sliced samples through synchrotron X-ray topography under various beam conditions, recording geometries and reflections. The result of ray-tracing simulation is further utilized in other studies including the investigation of effective penetration depth of all types of dislocations lying on the basal plane on grazing-incidence X-ray topography.

Engineering↗

Sub-5 nm edge-rich 1T'-ReSe 2 as bifunctional materials for hydrogen evolution and sodium-ion storage

The rhenium-based transition metal dichalcogenides (TMDs), as new members in the TMDs family, have raised great interests recently. Due to the anisotropic structure and unique photoelectric properties, they have potential applications for electrochemical energy conversion and storage. In this work, we performed density functional theory (DFT) calculations on pristine 1T'-ReSe 2 toward hydrogen evolution reaction (HER). The results indicated that the Gibbs free energy of the 1T'-ReSe 2 edge site for HER could be as small as 0.01 eV, superior to other reported TMDs. Experimentally, we developed a strategy to fabricate sub-5 nm sized 1T'-ReSe 2 nanoflakes on carbon nanotubes. Such a small size for the nanoflakes brought abundant edge exposure, which boosted the catalytic activity in the HER. Specifically, the 1T'-ReSe 2 nanoflakes needed only 23 and 60 mV overpotentials to achieve –1 and –10 mA cm –2 current densities, along with a low Tafel slope of 37 mV dec –1 and a high exchange current density of 0.3 mA cm –2 . The edge-rich and layered 1T'-ReSe 2 was also explored as an anode for sodium ion battery. The in operando X-ray absorption near edge structure (XANES) technique was applied to investigate the TMD behavior in real-time during the sodiation/desodiation process. Furthermore, the in situ results revealed that the nanosized 1T'-ReSe 2 is electrchemically reversible during discharge/charge cycles. The electrochemical test results demonstrated that 1T'-ReSe 2 could be a promising anode material for alkaline batteries.

25 ENERGY STORAGE↗

Gamma-ray imaging of Np-237 metal using an organic glass imager

Neutron and gamma-ray imaging systems are deployed within the field of nuclear safeguards for the detection and localization of special nuclear materials and other materials of interest. 237 Np is one of these materials of interest due its presence in spent nuclear fuel and potential for use in nuclear weapons when purified. Here, for the first time, a 6 kg neptunium sphere (98.8 wt% 237 Np) was measured using a dual-particle imager, from the University of Michigan, consisting of organic glass and inorganic scintillators. The novel composition of organic glass scintillator was recently developed at Sandia National Labs and has been used in particle imaging systems due to its time resolution and particle discrimination capabilities. Gamma-ray energy spectra from single and coincident events were extracted and the sequencing of Compton scatter and photoelectric absorption gamma-ray events was used to generate images using simple backprojection. The emissions of interest in this work are the 312 keV and 416 keV gamma rays from 233 Pa, a daughter isotope from the neptunium decay series. The results of this work show that there is close agreement between the true source location in angular space and the converged location from the gamma ray images created using the system. The gamma spectroscopy from single and coincident events also identified the characteristic emission from the daughter isotope and could be used to assist with the identification of 237 Np. Furthermore, successful localization of the source with 5 s of data demonstrates the practical application of the imaging system for imaging and detection of material in weapons-useable quantities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Determination of the effective sample thickness via radiative capture

Our procedure for determining the effective thickness of non-uniform irregular-shaped samples via radiative capture is described. In this technique, partial γ-ray production cross sections of a compound nucleus produced in a neutron-capture reaction are measured using Prompt Gamma Activation Analysis and compared to their corresponding standardized absolute values. For the low-energy transitions, the measured cross sections are lower than their standard values due to significant photoelectric absorption of the γ rays within the bulk-sample volume itself. Using standard theoretical techniques, the amount of γ-ray self absorption and neutron self shielding can then be calculated by iteratively varying the sample thickness until the observed cross sections converge with the known standards. The overall attenuation provides a measure of the effective sample thickness illuminated by the neutron beam. This procedure is illustrated through radiative neutron capture using powdered oxide samples comprising enriched 186 W and 182 W from which their tungsten-equivalent effective thicknesses are deduced to be 0.077(3) mm and 0.042(8) mm, respectively.

(n, γ) radiative capture↗

Fabrication of multilayer TiO{sub 2} thin films for dye-sensitized solar cells with high conversion efficiency by electrophoresis deposition

This research coats a commercial TiO{sub 2} nanoparticle Degussa P25 with good roundness and size uniformity on an indium tin oxide (ITO) glass substrate and to be photoelectrical electrode by electrophoresis deposition. It combined with dye N719, electrolyte I{sup -}/ I{sub 3}{sup -} and counter-electrode of Pt layer to produce dye-sensitized solar cells (DSSCs). Through the electrophoretic technique, a multilayer film of an appropriate thickness is deposited in the suspension containing TiO{sub 2} nanoparticles and isopropanol. In this process, electric current, voltage, and the number of deposition cycles are well controlled to obtain a single TiO{sub 2} film of around 3.3 {mu}m thick. Stacking is then performed to obtain a multilayer-typed TiO{sub 2} film of around 12 {mu}m thick. As the sintering temperature reaches 400 C, the prepared multilayer TiO{sub 2} film with a good compactness can increase the dye adsorption capability of the thin film and enhance its adsorption percentage. In addition, the heat treatment will transfer a portion of the rutile crystalline into the anatase crystalline, resulting in better material properties for DSSCs application. DSSCs produced are exposed to metal halide lamp and their energy conversion efficiency is measured. The I-V curve of the produced DSSCs shows that it has an excellent energy conversion efficiency of 6.9%. (author)

14 SOLAR ENERGY↗

Ionic liquid electrolyte based on S-propyltetrahydrothiophenium iodide for dye-sensitized solar cells

A new ionic liquid S-propyltetrahydrothiophenium iodide (T{sub 3}I) was developed as the solvent and iodide ion source in electrolyte for dye-sensitized solar cells. The electrochemical behavior of the I{sub 3}{sup -}/I{sup -} redox couple and effect of additives in this ionic liquid system was tested and the results showed that this ionic liquid electrolyte revealed good conducting abilities and potential application for solar devices. The effects of LiI and dark-current inhibitors were investigated. The dye-sensitized solar cell with the electrolyte (0.1 mol L{sup -1} LiI, 0.35 mol L{sup -1} I{sub 2}, 0.5 mol L{sup -1} NMBI in pure T{sub 3}I) gave short-circuit photocurrent density (J{sub sc}) of 11.22 mA cm{sup 2}, open-circuit voltage (V{sub oc}) of 0.61 V and fill factor (FF) of 0.51, corresponding to the photoelectric conversion efficiency ({eta}) of 3.51% under one Sun (AM1.5). (author)

14 SOLAR ENERGY↗

Preparation of 1-methyl-3-propylimidazolium acetate and its application in dye sensitized solar cells

In this paper, we reported the preparation of 1-methyl-3-propylimidazolium acetate (MPIAc), which proceeded via the metathesis of 1-methyl-3-propylimidazolium iodide (MPII) and lead acetate or potassium acetate. The apparent diffusion coefficients of triiodide and iodide in binary ionic liquids, MPIAc and MPII with various weight ratios, were demonstrated by cyclic voltammetry using a Pt ultramicroelectrode. It was found that the apparent diffusion coefficients of triiodide increased and those of iodide slightly increased with the weight ratio increase of MPIAc and MPII. The dye sensitized solar cells with the electrolyte, which was composed of 0.13 M I{sub 2}, 0.10 M LiI, 0.50 M 4-tert-butylpyrdine in the binary ionic liquid electrolyte of MPIAc (employing potassium acetate) and MPII (weight ratio 0.2), gave short circuit photocurrent density of 9.40 mA cm{sup -2}, open circuit voltage of 0.62 V, and fill factor of 0.57, corresponding to the photoelectric conversion efficiency of 3.34% at the illumination (air mass 1.5, 100 mW cm{sup -2}). (author)

1-Methyl-3-propylimidazolium acetate↗

Pomegranate leaves and mulberry fruit as natural sensitizers for dye-sensitized solar cells

This study employs chlorophyll extract from pomegranate leaf and anthocyanin extract from mulberry fruit as the natural dyes for a dye-sensitized solar cell (DSSC). A self-developed nanofluid synthesis system is employed to prepare TiO{sub 2} nanofluid with an average particle size of 25 nm. Electrophoresis deposition was performed to deposit TiO{sub 2} nanoparticles on the indium tin oxide (ITO) conductive glass, forming a TiO{sub 2} thin film with the thickness of 11 {mu}m. Furthermore, this TiO{sub 2} thin film was sintered at 450 C to enhance the thin film compactness. Sputtering was used to prepare counter electrode by depositing Pt thin film on FTO glass at a thickness of 20 nm. The electrodes, electrolyte (I{sub 3}{sup -}), and dyes were assembled into a cell module and illuminated by a light source simulating AM 1.5 with a light strength of 100 mW/cm{sup 2} to measure the photoelectric conversion efficiency of the prepared DSSCs. According to experimental results, the conversion efficiency of the DSSCs prepared by chlorophyll dyes from pomegranate leaf extract is 0.597%, with open-circuit voltage (V{sub OC}) of 0.56 V, short-circuit current density (J{sub SC}) of 2.05 mA/cm{sup 2}, and fill factor (FF) of 0.52. The conversion efficiency of the DSSCs prepared by anthocyanin dyes from mulberry extract is 0.548%, with V{sub OC} of 0.555 V and J{sub SC} of 1.89 mA/cm{sup 2} and FF of 0.53. The conversion efficiency is 0.722% for chlorophyll and anthocyanin as the dye mixture, with V{sub OC} of 0.53 V, J{sub SC} of 2.8 mA/cm{sup 2}, and FF of 0.49. (author)

14 SOLAR ENERGY↗

Controlled photo-discharge of dust in a complex plasma

One of the limitations in studying dusty plasmas is that many of the important properties of the dust (like the charge) are directly coupled to the surrounding plasma conditions rather than being determined independently. The application of high-intensity ultraviolet (UV) sources to generate discharging photoelectric currents may provide an avenue for developing methods of controlling dust charge. Careful selection of the parameters of the UV source and dust material may even allow for this to be accomplished with minimal perturbation of the background plasma. The Auburn Magnetized Plasma Research Laboratory (MPRL) has developed a ‘proof-of-concept’ experiment for this controlled photo-discharging of dust; a high-intensity, near-UV source was used to produce large changes in the equilibrium positions of lanthanum hexaboride ( $\textrm {LaB}_6$ ) particles suspended in an argon DC glow discharge with negligible changes in the potential, density and temperature profiles of the background plasma. The shifts in equilibrium position of the dust are consistent with a reduction in dust charge. Video analysis is used to quantify the changes in position, velocity and acceleration of a test particle under the influence of the UV and Langmuir probes are used to measure the effects on the plasma.

Physics↗