SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Tokamak Fusion Test Reactor (TFTR), the largest such facility in the U.S., is discussed with respect to instrumentation in general and mechanisms in particular. The design philosophy and detailed implementation of a universal probe mechanism for TFTR is discussed.
Cable technology is discussed. Manufacturing flow and philosophy are considered. Acceptance, gratification and flight tests are discussed. Fifteen-meter and fifty-meter models are considered. An economic assessment is included.
The methods in the Deep Space Network to support the maintenance of microprocessor based devices are described. Tests are performed by in circuit emulation and the ability to generate executable microdiagnostics in the field. More comprehensive diagnostics which may be down loaded from a remote location are generated. The need for a change in past training philosophy when dealing with microprocessor is pointed out.
A schematic description of the steering control process is presented. It is shown that this process can be described in terms of levels of control. Level of control will depend on driver's skill in making use of 'clever' strategies which may be related to knowledge about the path to follow (input) and/or the vehicle under control. This knowledge may be referred to as an internal model of a particular task element. Internal information, as derived from these internal models will probably be used together with proprioceptive feedback. It is hypothesized that the efficiency of the higher levels of control will be dependent on the accuracy of both the internal and proprioceptive information. Based on this research philosophy a series of experiments is carried out. Two primary experiments were done in order to analyse subjects' ability to reproduce steering-wheel positions and movements without visual feedback. Steering-wheel angle amplitude, steering force and movement frequency were involved as independent variables.
The compatibility and performance of the Shuttle communications system must be certified prior to operational missions. For this purpose, NASA has established the Electronics Systems Test Laboratory (ESTL) at the Johnson Space Center. This paper discusses the Shuttle communications system compatibility and performance testing being performed in the ESTL. The ESTL system verification test philosophy, including capabilities, procedures, and unique testing equipment are summarized. Summaries of the significant results of compatibility and performance tests of the Orbiter/Space-flight Tracking and Data Network, Orbiter/Air Force Remote Tracking Station, Orbiter/Tracking and Data Relay Satellite System and Orbiter/Shuttle Launch Support System interfaces are presented. The ESTL's unique ability to locate potential communication problems and participate in the resolution of these problems are discussed in detail.
The basic system parameters of a frequency-hopping multiple-access system are investigated. Noncoherent binary FSK and M-ary FSK signal formats are studied in a random-access asynchronous environment. Both slow and fast frequency hopping are considered. Under relatively ideal conditions, the degradation in performance with respect to the number of users is determined. The dependence on performance due to hopping rate and bandwidth constraint is developed. It is shown, for example, that, for fast hopping, the optimum hopping rate is that which spreads the users' power over the entire available bandwidth during each baud time. This agrees with the basic spread spectrum philosophy of making the signal appear white over as wide a bandwidth as possible. The computational results describe the trade-off between the number of tones in M-ary FSK and the number of hops per symbol. Given a specified number of tones in the frequency-hopping system, the results describe the manner in which the system degrades as the number of users is increased.
The Long Duration Exposure Facility (LDEF) is a large (14 feet diameter by 30 feet long) Shuttle transported, reusable spacecraft. The LDEF can accommodate up to 13,000 pounds of experiments mounted in 86 standard trays. This paper describes the philosophy and approach used for the passive thermal design of the LDEF. Also discussed are the standardized guidelines and techniques used in the thermal design and integration of approximately 50 different thermally passive experiments. A technique for reducing multinode thermal models of experiments to 2 nodes is also presented. This approach allows the efficient thermal integration of large numbers of experiments with the LDEF spacecraft.
The current development status of components to control the flow of propellants (liquid fluorine and hydrazine) in a demonstration space storable propulsion system is discussed. The criteria which determined the designs for the pressure regulator, explosive-actuated valves, propellant shutoff valve, latching solenoid-actuated valve and propellant filter are presented. The test philosophy that was followed during component development is outlined. The results from compatibility demonstrations for reusable connectors, flange seals, and CRES/Ti-6Al4V transition tubes and the evaluations of processes for welding (hand-held TIG, automated TIG, and EB), cleaning for fluorine service, and decontamination after fluorine exposure are described.
This paper presents the results obtained from a study conducted to evaluate the dynamic behavior of Dynamics Explorers-A and -B spacecraft. The effects of environmental torques on the spacecraft motion, momentum buildup due to these torques, and the long appendages on the main body motion are studied using numerical simulations. The numerical results are compared with flight data and are found to be in good agreement. A control philosophy for DE-B to minimize the pitch axis drift is developed. The performance of DE-B in inverted mode and during the inversion maneuver as well as in the normal mode are studied. The spin ripple effect on DE-A due to the long appendages is analyzed and the results are correlated with flight data.
A description is given of the inertial measurement unit (IMU) redundancy management (RM) techniques for automatic in-flight monitoring of inertial instrument performance by the Space Shuttles primary onboard guidance, navigation, and control computers. The techniques and rationale for detecting and identifying faulty instruments are discussed. Special attention is given to the design philosophy, thresholds, and error propagation characteristics of the IMU RM system. The derivation of thresholds is described from the viewpoint of reliability and the safety of the vehicle and crew.
In connection with the decision to conduct with the Shuttle an orbital, manned mission on its first launch, certain problems arose related to mission safety, which had to be provided without the benefit of either a graduated flight test program or an initial unmanned flight concept. In an attempt to overcome these problems, the philosophy was adopted to provide a reasonable estimate of maximum possible errors in the preflight predicted aerodynamics. The flight control system (FCS) was to be certified on the basis of the estimated errors prior to STS-1. A set of 'worst case' aerodynamic uncertainties, defined as variations, was developed. As part of the first flight certification, variations, combined with other system uncertainties, were used to 'stress' the FCS through a multitude of simulations. Attention is given to an Orbiter description, the entry mission, the correlation of aerodynamic uncertainties, the application of aerodynamic variation in FCS and trajectory design, and the flight test results.
The impact of mechanical-reliability practice on the Saturn/Apollo launch program is considered with reference to the interrelationship of analysts and designers with management. Rocket engine development, ground testing, and launch facilities in the Saturn/Apollo program are discussed, and the Saturn reliability approach is examined in regard to management style, decision making, human error control, and reliability analyses. It is noted that the use of conservative design philosophy contributed to achieved reliability.
The current philosophy and development directions being taken towards realization of medical systems for use on board space stations are discussed. Data was gained on the performance of physical examinations, venipuncture and blood flow, blood smear and staining, white blood cell differential count, throat culture swab and colony count, and microscopy techniques during a 28-day period of the Skylab mission. It is expected that the advent of Shuttle flights will rapidly increase the number of persons in space, create a demand for in-space rather than on-earth medical procedures, and necessitate treatments for disorders without the provision for an early return to earth. Attention is being given to pressurized environment and extravehicular conditions of treatment, the possibilities of the use of the OTV for moving injured or ill crewmembers to other space stations, and to isolation of persons with communicable diseases from station crews.
The teleoperator maneuvering system (TMS), consisting of the vehicle, the shuttle orbiter bay cradle with airborne support equipment, and the aft flight deck control station, is described. The vehicle is a reusable remotely controlled free flying vehicle capable of a variety of missions including payload placement, retrieval, servicing, viewing, and large space systems assembly support. The TMS flies preprogrammed trajectories as well as being controlled or reprogrammed from the aft flight deck or the ground. A building block design philosophy is described which permits the evolution of capability as it is needed and delays cost as much as possible. Various mission operations are discussed.
Research at NASA Langley's Materials Characterization Instrumentation Section has followed the philosophy of improving the science base of nondestructive evaluation and advancing the state of the art of quantitative interpretability of physical measurements of materials. Details of several R&D programs choosen to highlight the last several years are given. Applications of these technologies are presented in the area of stress measurement, characterization of metal heat treatment, and evaluation of material internal structure. A second focus of the program is on quantitative transducers/measurements that have resulted in better data in irregular inhomogeneous materials such as composites. Examples are presented of new capabilities resulting from these advances that include fatigue and impact damage evaluation.
A definition for human factors or ergonomics and its industrial and domestic application is presented. Human factors engineering, which discovers and applies information about human abilities, limitations, and other characteristics to the design of tools, machines, systems, tasks, jobs, and environments for safe, comfortable, and effective human use, is outlined. The origins of human factors and ergonomics, the philosophy of human factors, goals and objectives, systems development and design, are reviewed.
The Corporate Information System (CIS), an integrated information system intended to tie the corporation together as a functioning entity, is described. In addition to being a major upgraded automated data processing system, the CIS is a management philosophy which recognizes data as a valuable corporate resource and which distinguishes between data and selected data, or information. It further recognizes that different users need different kinds of information. Plans for CIS development are discussed. It will offer its users not just after-the-fact data, but timely information in a format that is meaningful and useful to the particular user, so that the information can be applied in planning, controlling, and decision making by all levels of management. In effect, CIS will help the corporation itself to function as a total, integrated system by typing together administrative activities through information exchange. The CIS supports the operational, tactical control, and strategic planning functions of the corporation. Operational functions are the day-to-day processing necessary to support the corporation's work, such as purchasing and payroll.
This document provides a general comparison of the state of the art of Soviet helicopter design vs. that of the West (U.S. in particular). It includes both commonalities and differences in conceptual design philosophies by addressing design parameters and design effectiveness according to accepted criteria. The baseline for comparison is by design gross weight which is presented in four categories: under 12,000 lb, 30-100,000 lb, and greater than 100,000 lb.