Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Effects of electron irradiation on large insulating surfaces used for European Communications Satellites

Samples of aluminized Kapton used for passive thermal control on the VHF shield and the antenna dish of ESA's OTS satellite and its derivatives were subjected to an incident electron beam of 25 keV and irradiated for 8 hours at room temperature and at -173 C under a vacuum of the 10 to the minus 6 th power torr. Visual observations during electron irradiation, measurements of leakage current and discharge characteristics, and material degradation following completion of irradiation are discussed.

Reddy, J.↗

Current understanding of the physics of type III solar radio bursts

One of the most exciting plasma physics investigations of recent years has been connected with the understanding of a new strong turbulent plasma state excited by propagating electron beams. This new state is initiated on the linear level by parametric instabilities (OTS, modulational, etc.) and results in a very dynamic state composed of collective clusters of modes called solitons, cavitons, spikons, etc. Introduction of these concepts into the classic beam-plasma interaction problem has rendered quasi-linear and weak turbulence theories inapplicable over most of the interesting parameter range, and helped explain many paradoxes connected with the propagation of beams in the laboratory and space. Following a brief review of these nonlinear notions, the means by which their application to type III solar radiobursts has revolutionized understanding of their propagation, radioemission and scaling properties and has guided the in situ observations towards a more complete understanding are demonstrated. A particular burst (May 16, 1971) is analyzed in detail and compared with numerical predictions.

Papadopoulos, K.↗

Self-acting geometry for noncontact seals

Performance ot two self acting seal designs for a liquid oxygen (LOX) turbopump was predicted over ranges of pressure differential and speed. Predictions were compared with test results. Performance of a radial face seal for LOX was predicted up to 448 N/cu cm and 147 m/sec. Performance of a segmented circumferential seal for helium was predicted up to 69 N/cu cm and 189 m/sec. Results confirmed predictions of noncontact operation. Qualitative agreement between test and analysis was found. The LOX face seal evidently operated with mostly liquid in the self acting geometry and mostly gas across the dam.

Allen, G. P.↗

MLS: Airplane system modeling

Analysis, modeling, and simulations were conducted as part of a multiyear investigation of the more important airplane-system-related items of the microwave landing system (MLS). Particular emphasis was placed upon the airplane RF system, including the antenna radiation distribution, the cabling options from the antenna to the receiver, and the overall impact of the airborne system gains and losses upon the direct-path signal structure. In addition, effort was expended toward determining the impact of the MLS upon the airplane flight management system and developing the initial stages of a fast-time MLS automatic control system simulation model. Results ot these studies are presented.

Thompson, A. D.↗

Temperature-dependent ion mixing and diffusion during sputtering of thin films of CrSi2 on silicon

Measurements of sputtering yields and composition profiles have been carried out using backscattering spectrometry for samples of CrSi2 on Si irradiated wth 200-keV Xe ions. When the CrSi2 layer is thinner than the ion range, the sputtering yield ratio of Si to Cr increases from 3.5 for room-temperature irradiation to 65 at 290 C. For a thick sample, the corresponding increase is from 2.4 to 4.0 only. These changes are explained in terms of a rise in the Si surface concentration ot 290 C. The driving force for this process seems to be the establishment of stoichiometric CrSi2 compound. Transport of Si to the surface is by ion mixing in the thin sample and thermal diffusion through the thick layer.

Shreter, U.↗

Long life communication satellites: Electric power supply during the eclipse period

The electric batteries, essentially nickel-cadmium for French satellites such as D1 A, D1 C, D1 D, D2 B, D5 A, D5 B, etc. and the batteries for such satellites as Symphonie, ANS, INTASAT, ESRO 4, and COS-B are discussed. The experience obtained led to the development of long lifetime batteries for communication satellites. Real simulation tests showed a lifetime of four years and accelerated lifetime tests of twelve years. These batteries will be applied in OTS, METEOSAT, and Marots. At the same time, new batteries are being developed, based on nickel-hydrogen or on silver-hydrogen, which should provide longer lifetime and better reliability.

Font, S.↗

RIM as an implementation tool for a distributed heterogeneous database

The another distributed database system (ADDS) prototype supports interactive, d hoc retrieval from several of the Amoco/Standard DHDBMS. The ADDS conceptual design, the usage of RIM in several components of ADDS, and some enhancements ot RIM that were used by the developers of the ADDS prototype are outlined. Topics covered include: (1) ADDS Overview; (2) composite database dictionary/directory; (3) user interface and user profiles; (4) subrequest execution; (5) merger/formatter; and (6) a transportable implamentation.

Breitbart, Y. J.↗

Vacuum-deposited optical coatings experiment (A0138-4)

The stability of various vacuum deposited optical coatings exposed to the space environment were analyzed. A wide range of optical components manufactured by vacuum deposition, such as metallic and multidielectric reflective coatings in the UV range, metal dielectric interference filtes in the UV and IR ranges, narrow-bandpass filters int he near-UV and visible ranges, selective metallic mirrors in the range from 1500 to 2500 A. antireflective and reflective IR coatings, beam splitters in the visible and IR ranges, and optical surface reflection (OSR) coatings were developed. Many of these components were incorporated into scientific and technical experiments flown on balloons and rockets as well as on Symphonie, Meteosate, OTS, D2-B, TIROS n, and others. It appears that these components operate successfully in flight.

Malherbe, A.↗

Monodeurated methane in the outer solar system. 2. Its detection on Uranus at 1.6 microns

Deuterium in the atmosphere of Uranus has been studied only via measurements of the exceedingly weak dipole lines of hydrogen-deuteride (HD) seen in the visible region of the spectrum. The other sensitive indicator of deuterium in the outer solar system is monodeuterated methane (CH3D) but the two bands normally used ot study this molecule, NU sub 2 near 2200 1/cm and NU sub 6 near 1161 1/cm, have not been detected in Uranus.

Debergh, C.↗

Solar particle history: 1983 version

It has long been known that the great majority of nuclear active solar particles are emitted in a few large storms in each 11 year cycle. A single storm in August 1972 dominated the fluence of particles of energy >10 MeV. Such storms can occur, it seems, at any time within the more active half ot the cycle. On a time scale long compared to 11 years, the knowledge comes from two sources. Terrestrial C-14 sets limits on the largest proton bursts that can have taken place in the 8000 years. Lunar surface samples have yielded data on mean fluxes on a time scale from the C-14 to the Mn-53 mean life. A mean flux was found of 70 protons >10 MeV and a rigidity constant R sub o = 100 MV to be robust on the 1,000,000 to 10,000,000 year time scale. Over the shorter periods represented by C-14 and Kr-81 the fluxes seem to have been higher by a factor of roughly three. Some examples of dating are discussed.

Arnold, J. R.↗

Heat flow increase following the rise of mantle isotherms and crustal thinning

Heat flow measurements in the western United States define a zone of high heat flow which coincides with the Basin and Range Province where extension has taken place recently. In this region, the average reduced heat flow is approx 30 mW sq. meters higher than in stable continental provinces; locally (e.g., Battle Mountain High), the heat flow anomaly can be more than 100 mW/sq meters above average. Estimates of the amount of extension range between 30% and 100% for the past 30 Ma. In the Colorado Plateau, which has been uplifted without major tectonic deformation, the heat flow is only slightly above average. Analytical calculations show that an abrupt change in heat flow at the base of the lithosphere 30 Ma ago would not affect the surface significantly. Uplift would proceed at a slow rate. A thermal perturbation at the base of a 40 km thick crust, however, would reach the surface faster and, after 30 Ma, the increase in surface heat flow would be about 75% of the amplitude of the heat flow anomaly. The number of volcanic rocks in the Basin and Range suggests that magma intrusions may provide an effective heat transfer mechanism. It can be show that if the source of the intrusions is at the base of the lithosphere, the response time will be much longer than 30 Ma, and most ot the heat transferred from the asthenosphere will be absorbed in the lithosphere.

Mareschal, J. C.↗

Thermal and electrical contact conductance studies

Prediction of electrical and thermal contact resistance for pressed, nominally flat contacts is complicated by the large number of variables which influence contact formation. This is reflected in experimental results as a wide variation in contact resistances, spanning up to six orders of magnitude. A series of experiments were performed to observe the effects of oxidation and surface roughness on contact resistance. Electrical contact resistance and thermal contact conductance from 4 to 290 K on OFHC Cu contacts are reported. Electrical contact resistance was measured with a 4-wire DC technique. Thermal contact conductance was determined by steady-state longitudinal heat flow. Corrections for the bulk contribution ot the overall measured resistance were made, with the remaining resistance due solely to the presence of the contact.

Vansciver, S. W.↗

Dissociation of metastable O2 as a potential source of atmospheric odd oxygen

An analysis of the possible dissociation of metastable oxygen molecules subject ot constraints imposed by selection rules for molecular transitions, airglow observations, and atmospheric chemistry leads to the following conclusions. Dissociation of O2(b1Sigma g +) must produce a negligible number of oxygen atoms at all altitudes in the earth's atmosphere. However, if the dissociation cross section of O2(a1Delta g) has a maximum value in the range 10 to the -20th to 10 to the -19th/sq cm, then the process O2(a1Delta g) + h(nu) yields O2(C3Delta u) yields O(3P) + O(3P) will constitute a significant, and potentially the major, source of odd oxygen in the uppermost stratosphere and mesosphere.

Frederick, J. E.↗

A lead-on-sapphire superconducting cavity of superior quality

A cavity consisting of a superconducting lead film on a sapphire substrate has been fabricated to obtain the enhanced frequency stability possible with this configuration. The cavity exhibits a quality value Q exceeding 2 x 10 to the 9th in its TE011 mode with a resonant frequency of 2.689 GHz. Methods of fabrication and testing of the cavity are presented. Since the interface between the film and substrate is exposed ot the full value of the resonant magnetic field, the present experiment is the most sensitive test to date for enhanced losses at the interface itself. No evidence of such losses is used. In fact, the measured values of the surface resistance match very well predictions for RF losses based on the BCS theory.

Thakoor, S.↗

Noble gases in the diamond-free ureilite, ALHA 78019 - The roles of shock and nebular processes

The noble gases for unshocked ureilite ALHA 78019 and moderately shocked ureilite Kenna are measured. The preparation of the samples and the analysis procedures are described. The analyses reveal that for ALHA 78019 the residue yield equals 2.5 percent of the original mass of the meteorite and 25 percent of the gas is contained in the fine-grained amorphous carbon, and for Kenna the residue yield equals 2.9 percent and 60 percent of the noble gas is contained in the carbon. It is noted that the gases and carbon are present in the ureilites prior ot the shock that produced the diamond, and the shock has no effect on the origin of the carbon in these meteorites. The source of the gas-rich carbon in the ureilite ALHA 78019 is investigated; the Xe-130/C ratio, which equals 4.2 x 10 to the -10th, implies that the gases were acquired while the ureilite was exposed to the solar nebula.

Wacker, J. F.↗

Computational solution of atmospheric chemistry problems

Extensive studies were performed on problems of interest in atmospheric chemistry. In addition to several minor projects, four major projects were performed and described (theoretical studies of ground and low-lying excited states of ClO2; ground and excited state potential energy surfaces of the methyl peroxy radical; electronic states ot the FO radical; and theoretical studies S02 (H2O) (sub n)).

Jafri, J.↗

A second generation experiment in fault-tolerant software

Information was collected on the efficacy of fault-tolerant software by conducting two large-scale controlled experiments. In the first, an empirical study of multi-version software (MVS) was conducted. The second experiment is an empirical evaluation of self testing as a method of error detection (STED). The purpose ot the MVS experiment was to obtain empirical measurement of the performance of multi-version systems. Twenty versions of a program were prepared at four different sites under reasonably realistic development conditions from the same specifications. The purpose of the STED experiment was to obtain empirical measurements of the performance of assertions in error detection. Eight versions of a program were modified to include assertions at two different sites under controlled conditions. The overall structure of the testing environment for the MVS experiment and its status are described. Work to date in the STED experiment is also presented.

Knight, J. C.↗

A computational strategy for making complicated structural problems simple

An effective computational strategy is presented for the analysis of large and complex structures. The strategy is based on generating the response of the complex structure using large perturbations from that of a lower-order (simpler) model associated with a simpler structure (or a simpler mathematical/discrete model of the original structure). The three key elements of the strategy are: (a) mixed (or primitive variable) formulation with the fundamental unknowns consisting of generalized displacements and stress parameters; (2) operator splitting, or a reduction method to relate the arrays and degrees of freedom of the original complex structure ot those of the simpler system; and (3) efficient iterative process for the generation of the response of the complex structure starting from that of the simpler system. The effectiveness of the proposed strategy is demonstrated by means of two numerical examples.

Noor, Ahmed K.↗