Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “OPTOELECTRONIC DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Anisotropic Properties of Quasi‐1D In 4 Se 3 : Mechanical Exfoliation, Electronic Transport, and Polarization‐Dependent Photoresponse

Abstract Theoretical and experimental investigations of various exfoliated samples taken from layered In 4 Se 3 crystals are performed. In spite of the ionic character of interlayer interactions in In 4 Se 3 and hence much higher calculated cleavage energies compared to graphite, it is possible to produce few‐nanometer‐thick flakes of In 4 Se 3 by mechanical exfoliation of its bulk crystals. The In 4 Se 3 flakes exfoliated on Si/SiO 2 have anisotropic electronic properties and exhibit field‐effect electron mobilities of about 50 cm 2 V −1 s −1 at room temperature, which are comparable with other popular transition metal chalcogenide (TMC) electronic materials, such as MoS 2 and TiS 3 . In 4 Se 3 devices exhibit a visible range photoresponse on a timescale of less than 30 ms. The photoresponse depends on the polarization of the excitation light consistent with symmetry‐dependent band structure calculations for the most expected ac cleavage plane. These results demonstrate that mechanical exfoliation of layered ionic In 4 Se 3 crystals is possible, while the fast anisotropic photoresponse makes In 4 Se 3 a competitive electronic material, in the TMC family, for emerging optoelectronic device applications.

Vorobeva, Nataliia S.↗

Nanomaterials for LightManagement in Electro-Optical Devices

In the past decade, nanostructured materials and nanoparticles have emerged as the necessary ingredients for electrooptical applications and enhancement of device performance, in particular by making use of the light management aspects of the nanomaterials. The application areas that are being transformed profoundly include smart coating devices (e.g., electrochromic, photochromic, and thermochromic devices), solar energy, and sensing. Despite the large volume of work in the past on smart coating devices, and in particular on electrochromic devices and thermochromic fenestrations, for optical transmission or reflection control, applications remain limited because of slow response time and nonuniformity in the case of large surfaces. Recent works in the field indicate that nanostructured electrochromic coatings would be an integral part of the solution to the above problem. One aspect that can thus be focused on would be the fabrication and characterization of the nanostructured smart coating materials and their compatibility with other layers in the overall smart coating device. In the area of solar photovoltaics, nanomaterials have been used in designing light-trapping schemes for inorganic as well as organic solar cells. One particular category of solar cells that has attracted much interest is the plasmonic solar cells in which metallic nanoparticles are incorporated, helping in enhancing their energy conversion efficiency. Nanostructured solar cells would eventually develop into a 'game changing' technology for making solar cells that are affordable and highly efficient, providing a sizeable alternative energy source for our ever-increasing energy needs. Sensors based on the optical properties of constituting nanostructures and nanoparticles also form a most interesting class of bio- and electrochemical sensing devices. The possibility of synthetizing nanoparticles and structures of specifically desired sizes and shapes has indeed opened a whole new range of sensing applications. In parallel to the experimental development of nanomaterials for light management in devices, theoretical modeling and analysis have also accomplished much progress, and different methods for simulating the optical properties of nanoparticles and structures have been proposed. This special issue of the Journal of Nanomaterials is thus dedicated to articles dealing with nanostructured materials that can be used for light management purpose in different applications. Silicon-rich oxide (SRO) is a dielectric material that contains Si nanoparticles and exhibits interesting physical characteristics for applications in optoelectronic devices. The work by Aceves-Mijares et al. examine, in detail the electro-, cathode- and photoluminescence properties of SRO and discuss the origin of light emission in this type of materials. SRO films, of high and medium silicon excess density, obtained by low-pressure chemical vapor deposition and annealed at 1,100 C have been studied. Results obtained by the authors have led to conclude that SRO emission properties are due to oxidation state nanoagglomerates rather than to nanocrystals, and the emission mechanism is similar to that in the donor-acceptor decay in semiconductors with a specific wide emission spectrum. Two papers are devoted to nanostructured electrochromic thin films, a category of materials most suitable for controlling light transmission or absorption in electrooptical devices, including smart window coatings. Dinh et al. have shown that by mixing nanostructured Ti and W oxides films, one can obtain devices with considerable enhancement of electrochromic efficiency and electrochemical stability as compared to the conventional nonnanostructured films. As large-area mixed Ti and W oxides can be prepared by the simple doctor blade technique followed by an electrochemical process, this type of nanostructured electrochromic films can be considered a good candidate for smart window applications. Djaoued et al. have presented their studies on the synthesis, characterization, and electrochromic applications of porous WO{sub 3} thin films with different nanocrystalline phases. Asymmetric type electrochromic devices have been constructed using hexagonal, monoclinic, and orthorhombic porous WO{sub 3} thin porous films, and their enhanced electrochromic functionality has been well demonstrated. The paper on smart materials by Chen et al. presents the synthesis of thermochromic W-doped VO{sub 2} (monoclinic/rutile) nanopowders using a novel and simple solution-based process as opposed to other conventional techniques such as excimer laser-assisted metal organic deposition and magnetron sputtering. This simple process is based on the reaction of ammonium metavanadate (NH{sub 4}VO{sub 3}) and oxalic acid dihydrate (C{sub 2}H{sub 2}O{sub 4} {center_dot} 2H{sub 2}O) followed by addition of appropriate ammonium tungstate (N{sub 5}H{sub 37}W{sub 6}O{sub 24} {center_dot} H{sub 2}O).

14 SOLAR ENERGY↗

Addition of the Lewis Acid Zn(C 6 F 5 ) 2 Enables Organic Transistors with a Maximum Hole Mobility in Excess of 20 cm 2 V –1 s –1

Incorporating the molecular organic Lewis acid tris(pentafluorophenyl)borane [B(C 6 F 5 ) 3 ] into organic semiconductors has shown remarkable promise in recent years for controlling the operating characteristics and performance of various opto/electronic devices, including, light-emitting diodes, solar cells, and organic thin-film transistors (OTFTs). Despite the demonstrated potential, however, to date most of the work has been limited to B(C 6 F 5 ) 3 with the latter serving as the prototypical air-stable molecular Lewis acid system. Herein, the use of bis(pentafluorophenyl)zinc [Zn(C 6 F 5 ) 2 ] is reported as an alternative Lewis acid additive in high-hole-mobility OTFTs based on small-molecule:polymer blends comprising 2,7-dioctyl[1]benzothieno [3,2-b][1]benzothiophene and indacenodithiophene–benzothiadiazole. Systematic analysis of the materials and device characteristics supports the hypothesis that Zn(C 6 F 5 ) 2 acts simultaneously as a p-dopant and a microstructure modifier. It is proposed that it is the combination of these synergistic effects that leads to OTFTs with a maximum hole mobility value of 21.5 cm 2 V –1 s –1 . In conclusion, the work not only highlights Zn(C 6 F 5 ) 2 as a promising new additive for next-generation optoelectronic devices, but also opens up new avenues in the search for high-mobility organic semiconductors.

36 MATERIALS SCIENCE↗

Advances in Singlet Fission Chromophore Design Enabled by Vibrational Spectroscopies

Singlet fission leads to the formation of two separate triplet T 1 excitons from an initial singlet S1 exciton through 1 (TT) and 1 (T...T), multiexcitonic intermediates that retain singlet character. Its ability to achieve external quantum efficiencies higher than 100% made it an attractive candidate for optoelectronic device applications. However, singlet fission has not been applied widely despite having been investigated by a myriad of spectroscopic methods, in part due to our poor understanding of how to optimize molecular structure and packing in chromophores well-suited to large-scale production. Vibrational spectroscopies provide a solution, because they directly probe nuclear motions, allowing us to monitor evolving structural changes in molecules undergoing singlet fission, thus providing us with roadmaps to design molecules suitable for optoelectronic applications. Furthermore, this Perspective reviews the contributions and analyzes the future directions of vibrational spectroscopies to the advancement in our knowledge about the mechanisms and rational designing of chromophores undergoing efficient singlet fission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting driving potentials at the buried SiO 2 nanolayers in solar cells by chemical-selective nonlinear x-ray spectroscopy

We present an approach to selectively examine an asymmetric potential in the buried layer of solar cell devices by means of nonlinear x-ray spectroscopy. Detecting second harmonic generation signals while resonant to the SiO 2 core level, we directly observe existence of the band bending effect in the SiO 2 nanolayer, buried in the heterostructures of Al/LiF/SiO 2 /Si, TiO 2 /SiO 2 /Si, and Al 2 O 3 /SiO 2 /Si. Furthermore, the results demonstrate high sensitivity of the method to the asymmetric potential that determines performance of functional materials for photovoltaics or other optoelectronic devices.

14 SOLAR ENERGY↗

Ab initio quantum dynamics of plasmonic charge carriers

Surface plasmons respond strongly to electric fields and generate energetic (hot) charge carriers that can be used in optoelectronic devices. However, utilization of hot carriers has to outcompete fast carrier relaxation in metals. Often, the reported efficiencies of nanoscale devices based on plasmon excitations are low and the mechanisms of device operation remain inconsistent within the field. Further developments hinge on fundamental understanding of the nature and kinetics of plasmon decay processes. In this work, we provide an overview of time domain ab initio modeling of hot carrier dynamics, demonstrating that atomistic details of the surface structure of plasmonic materials, and their chemical interaction with semiconducting and molecular charge acceptors and substrates, play key roles in governing the dynamics pathways. Considered case studies represent various dynamics channels and illustrate solar energy and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hyperthermal neutral beam sources for material processing (invited)

Hyperthermal neutral beams have a great potential for material processes, especially for etching and thin film deposition for semiconductor and display fabrication as well as deposition for various thin film applications. Plasma-induced damage during plasma etching is a serious problem for manufacturing deep submicron semiconductor devices and is expected to be a problem for future nanoscale devices. Thermal and plasma-induced damage is also problematic for thin film depositions such as transparent conductive oxide films on organic light emitting diodes or flexible displays due to high temperature processes in plasma environments. These problems can be overcome by damage-free and low-temperature processes with hyperthermal neutral beams. We will present the status of the hyperthermal neutral beam development and the applications, especially, in semiconductor and display fabrication and introduce potential applications of thin film growing for optoelectronic devices such as light emitting diodes.

36 MATERIALS SCIENCE↗

Low-temperature sprayed SnO x nanocomposite films with enhanced hole blocking for efficient large area perovskite solar cells

Scalable fabrication of charge transport layers with high uniformity and compactness is essential for the commercialization of perovskite solar cells (PSCs). Cost-effective deposition of high-quality electron transport layers (ETLs) is a particularly important step to achieve low-cost, efficient and large-area PSCs. Here, an open-air (relative humidity of 40–50%) and low-temperature (≤100 °C) ultrasonic spray coating of tin oxide (SnO 2 ) nanocomposite films incorporating nanocrystalline SnO 2 nanoparticles in an amorphous SnO x matrix is demonstrated to fabricate large-area ETLs for planar PSCs. The optimized SnO 2 /SnO x nanocomposite exhibits significantly enhanced hole-blocking and high-power conversion efficiencies of 18% and 16% for planar PSCs with an active area of 0.2 cm 2 and 1 cm 2 , respectively. More importantly, the devices show little current–voltage hysteresis as well as good shelf-life stability by maintaining ~90% of the initial performance without encapsulation after 2500 hours storage under inert conditions. Additionally, high voltages of >6.0 V have been obtained for solar modules of 2.1 cm 2 aperture area comprising six sub-cells in series, suggesting that the low-temperature, open-air and fast spray coating is suitable and transferable to deposit large-area charge transport layers for scalable PSCs or other optoelectronic devices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Interface and optical properties of Zn 1-x Mg x O films with Mg content of more than 70% grown on the (1$\bar{2}$10)-ZnO substrates

Fabricating Zn 1-x MgxO films with a high Mg content is key to their applications in deep-ultraviolet optoelectronic devices. In this work, we report the preparation of Zn1-xMgxO films on ($1\bar{2}10$)-ZnO substrates by molecular beam epitaxy. The Zn 1-x Mg x O/($1\bar{2}10$)-ZnO structure is revealed by x-ray diffraction and high-resolution transmission electron microscopy. Remarkably, no cubic MgO is observed for films with 74.6% Mg content; the film shows mainly the wurtzite structure with some intermediate phases at the interface. Photoluminescence spectra show that the film exhibits good optoelectronic properties with a bandgap of 4.6 eV. This work provides a new avenue for the fabrication of deep-ultraviolet Zn 1-x Mg x O films.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interface Design for Metal Halide Perovskite Solar Cells

With the rise of thin-film photovoltaics, the research community brought the interfaces within the device into the spotlight for performance enhancements. This Perspective lays out why this notion is especially applicable for solar cells based on metal halide perovskite (MHP) absorber materials, for which we reach a significant improvement of device functionality and stability through the means of engineering the energetics and electronic properties at the interface. After examining recent key developments in chemical and electronic structure characterization of MHPs that led to this avenue, we will iterate the next steps toward interlayer tailoring and analysis. The future goal is to derive a comprehensive model for interface energetics in perovskite solar cells and to set up respective design rules for stable high-efficiency cells. This approach also pertains to the broader scope of MHP-based optoelectronic devices for which charge carrier transport across the interfaces and surface recombination play a major role.

14 SOLAR ENERGY↗

Microgravity Processing and Photonic Applications of Organic and Polymeric Materials

Some of the primary purposes of this work are to study important technologies, particularly involving thin films, relevant to organic and polymeric materials for improving applicability to optical circuitry and devices and to assess the contribution of convection on film quality in unit and microgravity environments. Among the most important materials processing techniques of interest in this work are solution-based and by physical vapor transport, both having proven gravitational and acceleration dependence. In particular, PolyDiAcetylenes (PDA's) and PhthaloCyanines (Pc's) are excellent NonLinear Optical (NLO) materials with the promise of significantly improved NLO properties through order and film quality enhancements possible through microgravity processing. Our approach is to focus research on integrated optical circuits and optoelectronic devices relevant to solution-based and vapor processes of interest in the Space Sciences Laboratory at the Marshall Space Flight Center (MSFC). Modification of organic materials is an important aspect of achieving more highly ordered structures in conjunction with microgravity processing. Parallel activities include characterization of materials for particular NLO properties and determination of appropriation device designs consistent with selected applications. One result of this work is the determination, theoretically, that buoyancy-driven convection occurs at low pressures in an ideal gas in a thermalgradient from source to sink. Subsequent experiment supports the theory. We have also determined theoretically that buoyancy-driven convection occurs during photodeposition of PDA, an MSFC-patented process for fabricating complex circuits, which is also supported by experiment. Finally, the discovery of intrinsic optical bistability in metal-free Pc films enables the possibility of the development of logic gate technology on the basis of these materials.

Frazier, Donald O.↗

Gain dynamics of quantum dot devices for dual-state operation

Ground state gain dynamics of In(Ga)As-quantum dot excited state lasers are investigated via single-color ultrafast pump-probe spectroscopy below and above lasing threshold. Two-color pump-probe experiments are used to localize lasing and non-lasing quantum dots within the inhomogeneously broadened ground state. Single-color results yield similar gain recovery rates of the ground state for lasing and non-lasing quantum dots decreasing from 6 ps to 2 ps with increasing injection current. We find that ground state gain dynamics are influenced solely by the injection current and unaffected by laser operation of the excited state. This independence is promising for dual-state operation schemes in quantum dot based optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In Situ Electrochemistry of Buried Interfaces in Metal Halide Perovskites: Probing Energy Bands, Halide Redox Activity, and Kinetics

Control over charge injection and extraction processes across buried interfaces is fundamental for all (opto)electronic multilayer device platforms, necessitating detailed understanding of local structural and chemical differences that promote defect formation, distort energetic band-edge alignments, and alter charge transport processes. Herein, the implementation of a low-cost electroanalytical methodologies’ tool suite is described to quantitatively characterize buried interfaces and redox reactions in printable, mixed electrical–ionic, and redox-active metal halide perovskites and a prototypical hole-transporting nickel oxide (NiO x ) thin film. The objective is to demonstrate the power of electrochemical methodologies to improve the nanoscale understanding of complex interfaces within optoelectronic devices by providing case studies on how to: i) differentiate between electronic and chemical properties in NiO x contacts; ii) measure changes in reversibility of halide redox reactions via NiO x surface states; iii) assess energy alignment and charge transport across (modified) buried interfaces; and iv) quantify defects at buried interfaces that change with modifiers and differences in perovskite processing, including increasing defect concentrations when films are slot-die-coated versus spin-cast. The collective approach addresses major challenges in understanding the precise energy landscape and interface reactivity under relevant electric fields that mimic operando conditions (away from equilibrium) and across length scales in thin film device formats.

(spectro)electrochemistry↗

Transparent Metal–Organic Framework/Polymer Mixed Matrix Membranes as Water Vapor Barriers

Preventing the permeation of reactive molecules into electronic devices or photovoltaic modules is of significant concern to ensure their life span and reliability. Our report is focused on the formation of highly functioning barrier films based on nanocrystals (NCs) of a water-scavenging metal-organic framework (MOF) and a hydrophobic cyclic olefin copolymer (COC) to overcome the current limitations. Water vapor transmission rates (WVTR) of the films reveal a 10-fold enhancement in the WVTR compared to the substrate while maintaining outstanding transparency over most of the visible and solar spectrum, a necessary condition for integration with optoelectronic devices.

36 MATERIALS SCIENCE↗

Low-Temperature Gold Deposition Improves CdTe Back Contacts

Improved back contacts can benefit CdTe photovoltaics (PV). In this work, Cd(Se,Te) PV absorbers are cooled during Au evaporation to thermally quench a chemical reaction occurring between gold and CdTe and the generation of a reaction product that lowers device efficiency. Reducing substrate temperature enhances PV power conversion efficiency via open-circuit voltage and fill factor increases. X-ray photoelectron spectroscopy (XPS) reveals that lower temperature also reduces chemical perturbations of the CdTe, potentially linking back contact formation to a CdTe degradation product that hinders PV performance. Comparing reaction enthalpy and substrate heating energy shows that back contact formation by sputtering elemental metals onto ZnTe may exhibit a degradation pathway analogous to that of CdTe/Au reported here. Degradation-diminishing contact formation processes are therefore of general interest for optoelectronic devices, and the reduced substrate temperature in this study is one example.

14 SOLAR ENERGY↗

On combining the conductor-like screening model and optimally tuned range-separated hybrid density functionals

Range-separated hybrid functionals whose range-separation parameter γ has been nonempirically tuned to a particular molecule have been shown to yield frontier orbital energies and other properties in very good agreement with experiments. Yet, many cases, such as organic optoelectronic devices, require the description of molecules embedded in an environment. This can be done by combining the γ-tuning procedure with polarizable continuum models in general and the very versatile conductor-like screening model in particular. There are at least two different ways of performing this combination. The partially vertical γ-tuning employs equilibrium solvation throughout. The strictly vertical γ-tuning, on the other hand, employs nonequilibrium solvation to obtain ionization energies. Here, we compare ground-state and excited-state properties of several different molecules relevant to organic optoelectronics that were obtained using both of the two different tuning procedures. While there are significant differences in the ground-state properties, we see virtually no difference in the excited-state properties. Given these conclusions, we find that both tuning procedures have to be used in conjunction for the correct description of both ground-state and excited-state properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructural, magnetic, and optical properties of the self-assembled (III{sub 1-x}Mn{sub x})V quantum structure

Diluted magnetic semiconductor (DMS) materials have attracted much attention because of the interest in both investigations of fundamental physical properties and promising applications for various spintronic devices. Among many DMS structures, (III{sub 1-x}Mn{sub x})V ferromagnetic semiconductor quantum structures have been particularly attractive due to their potential applications in spintronic devices and they have combined properties of both III-V semiconductors and Mn ferromagnetic compounds, and the excellent advantages derived by utilizing mature III-V based heterostructure technology. Even though not many papers have been reported on the formation of one layer of (III{sub 1-x}Mn{sub x})V Quantum structure-Quantum Dots(QDs) and Quantum Wires(Q-Wire), systematic studies concerning microstructural, magnetic, and optical properties of the (III{sub 1-x}Mn{sub x})V quantum structure have been more attractive because of the interest in promising applications in optoelectronic devices, such as spin injection lasers and spin switching devices.

36 MATERIALS SCIENCE↗

Direct Observation of Halide Migration and its Effect on the Photoluminescence of Methylammonium Lead Bromide Perovskite Single Crystals

Optoelectronic devices based on hybrid perovskites have demonstrated outstanding performance within a few years of intense study. However, commercialization of these devices requires barriers to their development to be overcome, such as their chemical instability under operating conditions. In order to investigate this instability and its consequences, the electric field applied to single crystals of methylammonium lead bromide (CH 3 NH 3 PbBr 3 ) is varied, and changes are mapped in both their elemental composition and photo-luminescence. Synchrotron-based nanoprobe X-ray fluorescence (nano-XRF) with 250 nm resolution reveals quasi-reversible field-assisted halide migration, with corresponding changes in photoluminescence. It is observed that higher local bromide concentration is correlated to superior optoelectronic performance in CH 3 NH 3 PbBr 3 . A lower limit on the electromigration rate is calculated from these experiments and the motion is interpreted as vacancy-mediated migration based on nudged elastic band density functional theory (DFT) simulations. The XRF mapping data provide direct evidence of field-assisted ionic migration in a model hybrid-perovskite thin single crystal, while the link with photoluminescence proves that the halide stoichiometry plays a key role in the optoelectronic properties of the perovskite.

36 MATERIALS SCIENCE↗