Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear Reactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Study of Quasielastic Barrier Distributions as a Step towards the Synthesis of Superheavy Elements with Hot Fusion Reactions

The excitation functions for quasielastic scattering of Ne 22 + Cm 248 , Mg 26 + Cm 248 , and Ca 48 + U 238 are measured using a gas-filled recoil ion separator. The quasielastic barrier distributions are extracted for these systems and are compared with coupled-channel calculations. The results indicate that the barrier distribution is affected dominantly by deformation of the actinide target nuclei, but also by vibrational or rotational excitations of the projectile nuclei, as well as neutron transfer processes before capture. From a comparison between the experimental barrier distributions and the evaporation residue cross sections for Sg ( Z = 106 ), Hs (108), Cn (112), and Lv (116), it is suggested that the hot fusion reactions take advantage of a compact collision, where the projectile approaches along the short axis of a prolately deformed nucleus. Overall, a new method is proposed to estimate the optimum incident energy to synthesize unknown superheavy nuclei using the barrier distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Systematic Matter and Binding-Energy Distributions from a Dispersive Optical Model Analysis

We present the first systematic dispersive-optical-model analysis of 16,18 O, 40,48 Ca, 58,64 Ni, 112,124 Sn, and 208 Pb. In all systems, roughly half the total nuclear binding energy is associated with the most-bound 10% of the total nucleon density. The extracted neutron skins reveal interplay of asymmetry, Coulomb, and shell effects on the skin thickness. Here, our results indicate that optical-model fits on isotopic pairs are effective for constraining nuclear structural quantities otherwise difficult to observe experimentally.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Enhanced Deuteron Coalescence Probability in Jets

The transverse-momentum ($p_T$) spectra and coalescence parameters $B_2$ of (anti)deuterons are measured in p-p collisions at $\sqrt{s}=13$ $\text{TeV}$ for the first time in and out of jets. In this measurement, the direction of the leading particle with the highest $p_T$ in the event ($p^{lead}_T > 5 GeV/c$) is used as an approximation for the jet axis. The event is consequently divided into three azimuthal regions, and the jet signal is obtained as the difference between the toward region, that contains jet fragmentation products in addition to the underlying event (UE), and the transverse region, which is dominated by the UE. The coalescence parameter in the jet is found to be approximately a factor of 10 larger than that in the underlying event. This experimental observation is consistent with the coalescence picture and can be attributed to the smaller average phase-space distance between nucleons in the jet cone as compared with the underlying event. The results presented in this Letter are compared to predictions from a simple nucleon coalescence model, where the phase-space distributions of nucleons are generated using pythia8 with the Monash 2013 tuning, and to predictions from a deuteron production model based on ordinary nuclear reactions with parametrized energy-dependent cross sections tuned on data. The latter model is implemented in pythia8.3. Both models reproduce the observed large difference between in-jet and out-of-jet coalescence parameters, although the almost flat trend of the $B^{Jet}_2$ is not reproduced by the models, which instead give a decreasing trend.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Modification of Quark-Gluon Distributions in Nuclei by Correlated Nucleon Pairs

We extend the QCD Parton Model analysis using a factorized nuclear structure model incorporating individual nucleons and pairs of correlated nucleons. Our analysis of high-energy data from lepton deep-inelastic scattering, Drell-Yan, and W and Z boson production simultaneously extracts the universal effective distribution of quarks and gluons inside correlated nucleon pairs, and their nucleus-specific fractions. Such successful extraction of these universal distributions marks a significant advance in our understanding of nuclear structure properties connecting nucleon- and parton-level quantities. Published by the American Physical Society 2024

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Distinguishing Charged Lepton Flavor Violation Scenarios with Inelastic 𝜇 → 𝑒 Conversion

The Mu2e and COMET experiments are expected to improve existing limits on charged lepton flavor violation (CLFV) by roughly 4 orders of magnitude. 𝜇 → 𝑒 conversion experiments are typically optimized for electrons produced without nuclear excitation, as this maximizes the electron energy and minimizes backgrounds from the free decay of the muon. Here we argue that Mu2e and COMET will be able to extract additional constraints on CLFV from inelastic 𝜇 → 𝑒 conversion, given the 27 Al target they have chosen and backgrounds they anticipate. We describe CLFV scenarios in which inelastic CLFV can induce measurable distortions in the near-endpoint spectrum of conversion electrons, including cases where certain contributing operators cannot be probed in elastic 𝜇 → 𝑒 conversion. We extend the nonrelativistic EFT treatment of elastic 𝜇 → 𝑒 conversion to include the new nuclear operators needed for the inelastic process, evaluate the associated nuclear response functions, and describe several new-physics scenarios where the inelastic process can provide additional information on CLFV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Investigation of an octupole breathing mode of 208 Pb as a resolution to the elliptical-to-triangular azimuthal anisotropy puzzle in ultracentral relativistic heavy ion collisions

Relativistic heavy ion collisions provide a unique opportunity to probe the nuclear structure by taking an instantaneous snapshot of the colliding nuclei and converting it into momentum anisotropies of final emitted hadrons. A long-standing puzzle of too large a ratio of the elliptical-to-triangular (𝑣 2 -to-𝑣 3 ) anisotropies in ultracentral 208 Pb + 208 Pb collisions at the Large Hadron Collider (LHC) cannot be solved simply by hydrodynamic simulations with initial conditions containing the spherical or certain deformed shape of 208 Pb. Here, in this Letter, using the iEBE-VISHNU relativistic viscous hydrodynamic hybrid model simulations with the TR⁢ENTo initial condition, we show that a dynamic octupole deformation—a shape-breathing mode of 208 Pb —could potentially solve the 𝑣2-to-𝑣3 puzzle and simultaneously describe the 𝑣 3 ⁡{4} data measured in experiment. Our results highlight the unique capability of capturing transient collective properties of nuclei on yoctosecond (10 −24 s) timescales, unfeasible with low-energy nuclear reactions.

Xu, Hao-jie [Huzhou University, Zhejiang (China)] ↗
DOE OSTI2025

Electromagnetic radii of light nuclei from variational Monte Carlo calculations

We present variational Monte Carlo calculations of charge and magnetic radii in 𝐴 ≤ 10 nuclei. The calculations are based on the Norfolk two- and three-nucleon interactions, and associated one- and two-nucleon electromagnetic charge and current operators derived up to next-to-next-to-next-to-leading order in the chiral expansion. The charge and magnetic radii are extracted from the respective form factors. We find that the charge radii are within 5% of the experimental values for the nuclei considered. For the magnetic radii, a comparison is available only with 3 H and 3 ⁢He electron scattering data that are affected by large error bars. We hope that our predictions foster an interest in precisely measuring magnetic radii of heavier systems.

lepton induced nuclear reactions↗
DOE OSTI2022

Review of Direct Neutron Conversion and Detection Processes

Commercial and laboratory neutron detection systems use indirect neutron response of materials like pressurized helium-3 (via nuclear reaction 3He(n, p)3H) to measure and count neutrons emanating from a source. Recently a host of semiconductors, especially a ternary semiconductor of lithium indium diselenide (6LiInSe2) and a quaternary alloy of enriched lithium-6, indium, phosphorous, and selenium (6LiInP2Se6), have shown promising neutron counting possibilities by directly converting neutrons into charge-carrying elements within the body of the semiconductor. These semiconductors have high thermal neutron capture cross sections, suitable energy bandgaps (~2.0 electron volts) for room-temperature operations, and a favorable electronic band structure for efficient electron charge transport. The article examines the semiconductor properties of these compounds in terms of their neutron counting capabilities and possible ways to extract neutron energy information from them. Lithium-6 and boron-10 (with thermal neutron absorption cross sections of 938 ± 6 and 3855 ± 26 barns, respectively) produce charged particles to be measured via indirect neutron interactions. The efficiency of indirect conversion neutron detectors is limited because of the inefficiencies in conversion mechanism. In case of direct conversion, the neutrons create charged particles in a single material for neutron capture and charge collection, increasing detection efficiency. Unlike 3He proportional counters, which provide no neutron energy information, the semiconductors can be used as neutron energy spectrometer. Fully resolved neutron energy by 6LiInP2Se6 from a plutonium-beryllium source has been reported in the literature. We will discuss the influence of these multilayered semiconductors’ crystallographic structures and growth techniques on neutron energy determination.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2020

Electrical power generation from moderate-temperature radiative thermal sources

Moderate-temperature thermal sources (100° to 400°C) which radiate waste heat are often the by-product of mechanical work, chemical or nuclear reactions, or information processing. We demonstrate conversion of thermal radiation into electrical power using a bipolar grating-coupled complementary metal-oxide-silicon (CMOS) tunnel diode. A two-step photon-assisted tunneling charge pumping mechanism results in separation of charge carriers in pn-junction wells leading to a large open-circuit voltage developed across a load. Electrical power generation from a broadband blackbody thermal source has been experimentally demonstrated with converted power densities of 27 to 61 microwatts per square centimeter for thermal sources between 250° and 400°C. Scalable, efficient conversion of radiated waste heat into electrical power can be used to reduce energy consumption or to power electronics and sensors.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

coh3

CoH3 (CoH ver.3) is an optical model, exciton pre-equilibrium, and Hauser-Feshbach statistical model code, which calculates nuclear reaction cross sections for medium to heavy targets in the keV to MeV energy region. This program is written in standard C++, divided into approximately 200 source and header files. CoH solves the Schroedinger equation for optical potentials defined in the code, and calculates differential elastic scattering, reaction, and total cross sections, for neutron, proton, deuteron, triton, 3He, and alpha-particle. Deformed optical potentials are solved with the coupled-channels method, in which the ground state rotational band members, or vibrational phonon states are coupled. The optical model gives particle transmission coefficients that are fed into the statistical model calculations. CoH includes the pre-equilibrium model (exciton model), the direct/semidirect capture model, and the multi-stage Hauser-Feshbach statistical decay with width fluctuation correction based on the Gaussian orthogonal ensemble. For weakly coupled levels, the DWBA (distorted wave Born approximation) method is used to calculate the direct inelastic scattering process to the excited states.

Kawano, Toshihiko↗
DOE OSTI2025

Nautilus

A collection of useful utilities for simulating nuclear reactions and related applications.

Krueger, Brendan K. [Los Alamos National Laborator↗
DOE OSTI2026

Jupyter-notebook-for-antisymmetrization-circuits

Validation through explicit state-vector validation of the swap operations generated using Dicke-state construction to produce the antisymmetrized states of targets and projectiles for nuclear reaction simulations using quantum computing techniques.

Stetcu, Ionel [Los Alamos National Laboratory]↗
DOE OSTI2024

Neutron diffraction: a primer

Because of the neutron’s special properties, neutron diffraction may be considered one of the most powerful techniques for structure determination of crystalline and related matter. Neutrons can be released from nuclear fission, from spallation processes, and also from low-energy nuclear reactions, and they can then be used in powder, time-of-flight, texture, single crystal, and other techniques, all of which are perfectly suited to clarify crystal and magnetic structures. With high neutron flux and sufficient brilliance, neutron diffraction also excels for diffuse scattering, for in situ and operando studies as well as for high-pressure experiments of today’s materials. For these, the wave-like neutron’s infinite advantage (isotope specific, magnetic) is crucial to answering important scientific questions, for example, on the structure and dynamics of light atoms in energy conversion and storage materials, magnetic matter, or protein structures. In this primer, we summarize the current state of neutron diffraction (and how it came to be), but also look at recent advances and new ideas, e.g., the design of new instruments, and what follows from that.

36 MATERIALS SCIENCE↗
DOE OSTI2020

w18_plxa Final Report Viewgraphs [Slides]

For our fusion concept, we want to look at the influence of: 1) Density perturbations of the liner [shell that pushes on the target to get the target to fusion conditions] and 2) Magnetic field and anisotropic conductivity effects. On the compression of the target (final ion temperatures, without nuclear reaction calculations)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Varying Quantum Degeneracy in Plasmas Created at the National Ignition Facility [Slides]

Physically realized electron gas systems usually reside in either the quantum non-degenerate or fully degenerate limit, where the average de Broglie wavelength of the thermal electrons becomes comparable with the interparticle distance between electrons. A few systems, such as young brown dwarfs and the cold dense fuels created in imploded cryogenic capsules at the National Ignition Facility, lie between these two limits and are partially degenerate. The National Ignition Facility has the unique capability of varying the electron quantum degeneracy by adjusting the laser drive used to implode the capsules. This allows experimental studies of the effects of the degeneracy level on plasma transport properties. By measuring rare nuclear reactions in these cold dense fuels, we show that the electron stopping power, which is the rate of energy loss per unit distance travelled by a charged particle, changes with increasing electron density. We observe a quantum-induced shift in the peak of the stopping power using diagnostics that measure above and below this peak. The observed changes in the stopping power are shown to be unique to the transition region between non-degenerate and degenerate plasmas. Our results support the screening models applied to partially degenerate astrophysical systems such as young brown dwarfs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Physics Flash Winter 2021 [Newsletter]

The Winter 2021 quarterly newsletter highlights articles titled "Putting down new markers for Los Alamos neutrino research", Direct measurements of nuclear reactions on radionuclides", Novel thermal neutron detector safeguards aircraft, HPC semiconductor electronics", along with the usual standard sections.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Coupled radiation transport and plasma physics for ICF simulations [Slides]

Describing high-temperature plasmas requires inclusion of several nonlinear coupled physics, including ion kinetics - for each isotope species present in the plasma, electron kinetics, thermal radiative transfer (TRT), electromagnetic description, and nuclear reactions (fusion burn). Simulating plasmas in ICF hohlraums aims to solve kinetic ions (particles), fluid electrons, energetic electrons, electromagnetics, kinetic radiation (MG DP solver), and laser-plasma interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

A New Data Analysis Technique for Determining Mix Parameters from HED Experiments

In designing, analyzing, and understanding high-energy-density (HED) physics experiments, including inertial confinement fusion (ICF) experiments, we must contend with the extension of hydrodynamics to new regimes where additional physics, such as radiation transport and nuclear reactions, become important and coupled to the dynamics. Our most sophisticated models and understanding are based in classical, low-energy physics, since that is what we have the easiest access to creating and diagnosing. To assess our extrapolation of that understanding to the HED regime will require comparable precision in experiments and measurements. This is particularly the important in the case of hydrodynamic turbulence — most experiments are designed with one or two dimensions of symmetry, but at small scales hydrodynamics is generically observed to crumple into a fine structure of apparently random, three-dimensional eddies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗