Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Synthesis of magnesiowüstite nanocrystallites embedded in an amorphous silicate matrix via low energy multiple ion implantations

The synthesis process is presented for experimentally simulating modifications in cosmic dust grains using sequential ion implantations or irradiations followed by thermal annealing. Cosmic silicate dust analogues were prepared via implantation of 20–80 keV Fe - , Mg - , and O - ions into commercially available p-type silicon (100)wafers. The as-implanted analogues are amorphous with a Mg/(Fe+Mg) ratio of 0.5 tailored to match theoretical abundances in circumstellar dusts. Before the ion implantations were performed, Monte-Carlo-based ion-solid interaction codes were used to model the dynamic redistribution of the implanted atoms in the silicon substrate. 600 keV helium ion irradiation was performed on one of the samples before thermal annealing. Two samples were thermally annealed at a temperature appropriate for an M-class stellar wind, 1000 K, for 8.3 h in a vacuum chamber with a pressure of 1 x 10 -7 torr. The elemental depth profiles were extracted utilizing Rutherford Backscattering Spectrometry (RBS) in the samples before and after thermal annealing. X-ray diffraction (XRD)analysis was employed for the identification of various phases in crystalline minerals in the annealed analogues. Transmission electron microscopy (TEM) analysis was utilized to identify specific crystal structures. RBS analysis shows redistribution of the implanted Fe, Mg, and O after thermal annealing due to incorporation into the crystal structures for each sample type. XRD patterns along with TEM analysis showed nanocrystalline Mg and Fe oxides with possible incorporation of additional silicate minerals.

79 ASTRONOMY AND ASTROPHYSICS↗

Morphology control of ZnO nanostructures for high efficient dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) were fabricated based on different ZnO nanostructures with controllable morphologies synthesized via capping agent-assisted hydrothermal method. The capping agent hindered the growth along (001) direction, so the morphology evolved from rods to nanosheets with increasing the amounts of capping agents. The kinetics of the photoelectrochemical properties in DSSCs were also evaluated via electrochemical impedance spectroscopy with focusing on exploring the electron lifetime, electron diffusion coefficient and effective diffusion length of the cells in a quantitative manner based on an equivalent circuit model. The physical properties, such as specific surface area, photoluminescence and ultraviolet–vis diffuse reflectance spectra (DRS), were also extensively characterized in detail. DSSCs fabricated with ZnO nanosheets/rod hierarchical structures as photoanodes showed significantly improved photovoltaic performance with open-circuit voltage increasing from 0.45 V to 0.73 V, as well as the overall conversion efficiency 5.69 times better than that of ZnO rod. It was attributed to higher surface area (21.96 m{sup 2}·g{sup −1}) and more efficient light absorption, as well as more efficient electron transfer process. - Highlights: • Controlled morphologies from rods to nanosheets were manipulated by hydrothermal method. • Different ZnO morphologies based DSSCs were investigated by IV and EIS with forward biases. • DSSCs based on nano hierarchical structures yield 5.67 times higher of power conversion efficiency than that of rods.

36 MATERIALS SCIENCE↗

Computer Simulation Methods for Defect Configurations and Nanoscale Structures

This chapter will describe general computer simulation methods, including ab initio calculations, molecular dynamics and kinetic Monte-Carlo method, and their applications to the calculations of defect configurations in various materials (metals, ceramics and oxides) and the simulations of nanoscale structures due to ion-solid interactions. The multiscale theory, modeling, and simulation techniques (both time scale and space scale) will be emphasized, and the comparisons between computer simulation results and exprimental observations will be made.

36 MATERIALS SCIENCE↗

Understanding the origin of high-rate intercalation pseudocapacitance in Nb 2 O 5 crystals

Pseudocapacitors aim to maintain the high power density of supercapacitors while increasing the energy density towards those of energy dense storage systems such as lithium ion batteries. Recently discovered intercalation pseudocapacitors (e.g. Nb 2 O 5 ) are particularly interesting because their performance is seemingly not limited by surface reactions or structures, but instead determined by the bulk crystalline structure of the material. We study ordered polymorphs of Nb 2 O 5 and detail the mechanism for the intrinsic high rates and energy density observed for this class of materials. We find that the intercalating atom (lithium) forms a solid solution adsorbing at specific sites in a network of quasi-2D NbO x faces with x {1.3, 1.67, or 2}, donating electrons locally to its neighboring atoms, reducing niobium. Open channels in the structure have low diffusion barriers for ions to migrate between these sites (Eb 0.28 0.44 eV) comparable to high-performance solid electrolytes. Using a combination of complementary theoretical methods we rationalize this effect in Li x Nb 2 O 5 for a wide range of compositions (x) and at finite temperatures. Multiple adsorption sites per unit-cell with similar adsorption energies and local charge transfer result in high capacity and energy density, while the interconnected open channels lead to low cost diffusion pathways between these sites, resulting in high power density. The nano-porous structure exhibiting local chemistry in a crystalline framework is the origin of high-rate pseudocapacitance in this new class of intercalation pseudocapacitor materials. As a result, this new insight provides guidance for improving the performance of this family of materials.

36 MATERIALS SCIENCE↗

Seeing structural evolution of organic molecular nano-crystallites using 4D scanning confocal electron diffraction (4D-SCED)

Abstract Direct observation of organic molecular nanocrystals and their evolution using electron microscopy is extremely challenging, due to their radiation sensitivity and complex structure. Here, we introduce 4D-scanning confocal electron diffraction (4D-SCED), which enables direct in situ observation of bulk heterojunction (BHJ) thin films. 4D-SCED combines confocal electron optic setup with a pixelated detector to record focused spot-like diffraction patterns with high angular resolution, using an order of magnitude lower dose than previous methods. We apply it to study an active layer in organic solar cells, namely DRCN5T:PC 71 BM BHJ thin films. Structural details of DRCN5T nano-crystallites oriented both in- and out-of-plane are imaged at ~5 nm resolution and dose budget of ~5 e − /Å 2 . We use in situ annealing to observe the growth of the donor crystals, evolution of the crystal orientation, and progressive enrichment of PC 71 BM at interfaces. This highly dose-efficient method opens more possibilities for studying beam sensitive soft materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Degradation science: Integrating modeling and experiments to predict localized corrosion processes (Annual Progress Report)

Additively manufactured (AM) eutectic high-entropy alloys (EHEAs), such as nano-lamellar AlCoCrFeNi 2.1 , have excellent strength, ductility, and wear resistance even at elevated temperatures, but their corrosion behavior in aggressive acids at different length scales remain poorly understood. This work investigates the corrosion behavior of laser powder bed–fused (L-PBF) AlCoCrFeNi 2.1 as a function of annealing temperatures, probing degradation mechanisms from nanoscopic to macroscopic length scales. The alloy is dual phase consisting of a ductile FCC L1 2 phase and a high-strength BCC B2 phase. Rapid solidification during L-PBF produces a far-from-equilibrium nano-lamellar structure with nearly homogeneous elemental distribution, which tends to evolve upon annealing toward Cr/Co/Fe-enriched FCC and Al/Ni-enriched B2. Three conditions were studied: as-printed, 600 °C/5 h, and 1000 °C/1 h, over which B2 lamellae coarsen, lamellar spacing increases, and elemental segregation becomes more prominent. Microstructure and chemistry were characterized by scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS), while in-situ electrochemical atomic force microscopy (EC-AFM) was used to link early (<5 h) local dissolution to microstructure after exposure in sulfuric acid. EC-AFM highlights preferential dissolution of the BCC/B2 phase where the surrounding matrix is Cr-depleted and directly quantifies the dissolution rates within individual phases, tracks the transition from early nano-scale attack to partial repassivation, to correlate height differences with current and impedance responses. To monitor longer-term behavior (up to 96 h), ex-situ AFM, SEM, and confocal imaging were combined with conventional bulk electrochemical tests, bridging nanoscale observations to micro/meso-scale damage morphologies. At the meso-scale, the deepest dissolution channels align with the build-direction lamellae and melt-pool boundaries, indicating that printing directionality guides the propagation of these localized corrosion sites. Annealing modifies corrosion by restructuring BCC/FCC phase fractions, lamellar spacing, and Cr/Al segregation, thereby changing the cathode/anode ratio and passive film stability. The results clarify how as-printed and annealed nano-lamellar architectures differ in their susceptibility to selective dissolution; how elemental segregation competes with residual stresses along the build direction. With these insights, future work will use CALPHAD-guided alloy modification to stabilize higher Cr contents in the B2 phase while retaining a dominant FCC+B2/BCC microstructure, with the goal of designing mechanically robust, corrosion-resistant EHEAs for safety-critical applications to leverage the LLNL’s broader national and global security mission.

36 MATERIALS SCIENCE↗

Reactive flash sintering and characterization of bulk high entropy nitrides

Over the past decade, numerous high-entropy ceramics have been synthesized, often displaying attractive properties. However, the study on facile preparation of bulk high entropy nitrides (HEN) are limited, despite its broad potential applications. This research demonstrates for the first time rapid fabrication (within ∼6 min) of bulk high-entropy nitrides, especially (Al 0.17 Nb 0.17 Ta 0.17 Ti 0.32 Zr 0.17 )N, from binary nitride powder mixtures using a highly efficient reactive flash sintering (RFS) technique. X-ray diffraction (XRD) shows the HENs from RFS are near single-phase solid solutions with a rock salt crystal structure, while in situ synchrotron study carried out during RFS captured in real time the formation of HEN, which was preserved upon cooling, suggesting thermodynamic stability of the HEN phase, even up to extreme pressure (∼35.6 GPa). Microscopic analyses using SEM, STEM, and EDS reveal decent uniformity for HEN with no obvious segregation of elements, even to submicron scale. Some properties of the obtained bulk HENs are consistent with expectations. For example, their hardness and bulk modulus are close to estimates based on rule-of-mixture (ROM) values from the constituent binary nitrides. Meanwhile, some other measured properties seem to show surprises. For example, the fracture toughness for the HENs (e.g., 7.81 ± 1.40 MPa•m 1/2 or higher) turns out to be more than double of the expected ROM estimates. The significantly improved fracture toughness is attributed to the observed nano-layered structure of the HENs, despite the HEN’s cubic crystal structure and high hardness. In addition, the oxidation resistance shows improvement up till ∼800°C, possibly due to Ta doping that suppress oxygen vacancy formation in the oxide shell, while the 5-metal HEN of (Al 0.17 Nb 0.17 Ta 0.17 Ti 0.32 Zr 0.17 )N displays superconductivity (T c of ∼5–7 K from magnetism and resistivity measurements, slightly lower than ROM estimate), despite insulating property of starting AlN. Furthermore, future study combining experimental investigation using larger samples to confirm the observed increase in fracture toughness and oxidation resistance, theoretical modeling at different length scale, and more detailed structural/chemical characterization, especially at the atomic scale, are all needed to fully understand the inter-relationships between composition, processing, structure, and novel properties for these HENs and the development of related new materials for different applications.

Flash sintering↗

The annealing effects on the micro-structure and properties of RuMoC films as seedless barrier for advanced Cu metallization

100 nm thick RuMoC films and 5 nm thick RuMoC films with Cu capping have been deposited on Si(111) by magnetron co-sputtering with Ru and MoC confocal targets. The samples were subsequently annealed at temperatures ranging from 450 to 650 °C in vacuum at a pressure of 3 × 10{sup −4} Pa to study the annealing effects on the microstructures and properties of RuMoC films for advanced seedless Cu metallization applications. The sheet resistances, residual oxygen contents, and microstructures of the RuMoC films have close correlation with the doping contents of Mo and C, which can be easily controlled by the deposition power ratio of MoC versus Ru targets (DPR). When DPR was 0.5, amorphous RuMoC film (marked as RuMoC II) with low sheet resistances and residual oxygen contents was obtained. The fundamental relationship between the annealing temperatures with the microstructures and properties of the RuMoC films was investigated, and a critical temperature point was revealed at about 550 °C where the components and microstructures of the RuMoC II films changed obviously. Results indicated that below 550 °C, the RuMoC II films remained amorphous due to the well-preserved C-Ru and C-Mo bonds. However, above 550 °C, the microstructures of RuMoC II films transformed from amorphous to nano-composite structure due to the breakage of Ru-C bonds, while the supersaturated solid solution MoC segregated out along the grain boundaries of Ru, thus hindering the diffusion of Cu and O atoms. This is the main mechanism of the excellent thermal stability of the RuMoC films after annealing at high temperatures. The results indicated great prospects of amorphous RuMoC films in advanced seedless Cu metallization applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cubic phase stability, optical and magnetic properties of Cu-stabilized zirconia nanocrystals

By means of experimental and ab initio investigations, in this article we report on the cubic phase stability of Cu doped zirconia (ZrO 2 ) at room temperature, and further characterize its structural, optical and magnetic properties. Various compositions of Zr 1– x Cu x O 2 (0.01 ≤ x ≤ 0.25) nanocrystallites of average size ~16 nm were synthesized using co-precipitation technique. Thermal analysis and kinetics of crystallization revealed that the cubic phase at ambient temperature can be stabilized by using a critical calcination temperature of 500 °C for 8 h in air and a critical composition of $x_c$ = 0.10 ± 0.05. For $x < x_c$, some undigested monoclinic phase of ZrO 2 exists together with the cubic structure. However, for $x > x_c$, the monoclinic CuO emerges as a secondary phase with shrinkage of unit-cell volume with increasing the Cu content. At x = 0.05 and 500 °C calcination temperature, we observe a high degree of cubic crystallinity which breaks down into monoclinic phase with increasing calcination temperature beyond 550 °C. Electron magnetic resonance studies provide evidence for the substitution of Cu 2+ ( 2 D 5/9 ,3d 9 ) ions at Zr 4+ sites with g ∥ = 2.250, g ⊥ = 2.018 and average g a = (g ∥ + 2g ⊥ )/3 ~ 2.1. The temperature dependence of magnetic susceptibility measurements from 2 K to 300 K exhibits Curie–Weiss behaviour whose analysis using g a = 2.1 and spin S = 1/2 yields x = 0.028 and x = 0.068 for the nominal x = 0.05 and x = 0.20 samples, respectively. This magnetic analysis confirms the findings from x-ray diffraction that only a part of Cu is successfully doped into cubic phase of Cu-doped ZrO 2 . The optical bandgap decreases with increasing x, which is due to the emergence of Cu-d states at Fermi-level near the valence bands, thus making Cu-doped zirconia a hole doped (p-type) semiconductor.

electron spin resonance↗

Ultrastrong Ionotronic Films Showing Electrochemical Osmotic Actuation

Abstract A multifunctional soft material with high ionic and electrical conductivity, combined with high mechanical properties and the ability to change shape can enable bioinspired responsive devices and systems. The incorporation of all these characteristics in a single material is very challenging, as the improvement of one property tends to reduce other properties. Here, a nanocomposite film based on charged, high‐aspect‐ratio 1D flexible nanocellulose fibrils, and 2D Ti 3 C 2 T x MXene is presented. The self‐assembly process results in a stratified structure with the nanoparticles aligned in‐plane, providing high ionotronic conductivity and mechanical strength, as well as large water uptake. In hydrogel form with 20 wt% liquid, the electrical conductivity is over 200 S cm −1 and the in‐plane tensile strength is close to 100 MPa. This multifunctional performance results from the uniquely layered composite structure at nano‐ and mesoscales. A new type of electrical soft actuator is assembled where voltage as low as ±1 V resulted in osmotic effects and giant reversible out‐of‐plane swelling, reaching 85% strain.

Chemistry↗

Zeolite‐Based Catalysts for Conversion of Oxygenated Polymer Waste by Positron Annihilation

Positron Annihilation Lifetime Spectroscopy (PALS) has been employed to investigate the catalysts HZSM-5 and MESO−Y, which play a pivotal role in catalyzing and upgrading plastics, with a primary focus on oxygenated polymers, thereby transforming existing plastic materials into simpler, higher-quality value-added products. Here, in this study, PALS was systematically compared with other complementary analytical techniques. The research outcomes have successfully demonstrated the efficacy of PALS in elucidating the morphology and topology of zeolites at micro/meso-meter scales. The first experiment focuses on H-ZSM-5 zeolite subjected to treatments involving polyurethane and polypropylene. The second experiment delves into H-ZSM-5 zeolites with varying Si/Al ratios, both before and after conversion. The third experiment investigates Y zeolites that are surfactant templated to induce meso-porosity, examining their fresh state as well as their post-conversion condition. The PALS analysis was supplemented by BET (Brunauer-Emmett-Teller) analysis and NMR (Nuclear Magnetic Resonance) spectroscopies. Notably, PALS exhibits superior sensitivity, at the sub-nanometer scale, suggesting its potential as a preferred complementary method for catalysis studies. In conclusion, the integration of PALS into the repertoire of analytical tools enhances our understanding of catalyst behavior and catalytic processes, offering valuable insights for the advancement of plastic recycling and catalysis research.

32 - ENERGY CONSERVATION, CONSUMPTION, AND UTILIZA↗

Arabic Gum as Bio-Synthesizer for Ag–Au Bimetallic Nanocomposite Using Seed-Mediated Growth Technique and Its Biological Efficacy

Bio-synthesis of nanostructures is an ever green approach; therefore, the current work attempts to use Arabic gum as bio-synthesizer for manufacturing Ag–Au bimetallic nanocomposite, using seed-mediated growth technique. The relevance of the as-used natural gums for manufacturing of Ag–Au nanocomposite in quite simple, energy saving and cost effective methodology, has been successfully approved. Arabic gum acted concurrently as a reducer for metal ions to nano-sized structures and crystal growth modifier of the so-generated nanocomposite. Monitoring of interchanging in size distribution of the as-produced bimetallic nanocomposite by the effect of the gum concentration, concentration of nanometals precursors, their addition sequencing in reaction liquor, and reaction temperature, was illustrated and well characterized. UV–Visible spectra showed that the characteristic surface plasmon resonance peak for Ag–Au bimetallic nanocomposite was observed at 480–495 nm and XRD patterns confirmed the preparation of bimetallic nanostructures. According to zetasizer analyses and TEM micrographs, small sized (3.1 nm) Ag–Au bimetallic nanocomposite with narrow size distribution (1–7 nm) were obtained. The all prepared bimetallic nanocomposite showed good stability with polydispersity index ranged in 0.203–0.530. The mechanism of nanostructures’ generation was suggested and approved using FT-IR, 1HNMR and 13CNMR spectra. The prepared Ag–Au bimetallic nanocomposites showed excellent antibacterial activity against both of gram + ve and gram − ve strains.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Regularities and Mechanisms of Formation of Submicro-, Nano-, and Ultrafine-Grained Structures and Mechanical Properties of Metals and Alloys Under Different Treatments

An overview of our original studies and the results reported in the literature on the investigation of variations in structure, phase composition, mechanical and other properties of metallic materials under external impacts is made, including their high-pressure processing by large (severe) plastic and megaplastic deformation, explosion loading, and irradiation with ultra-short laser pulses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic and nano-scale characterization of a 50-year-old hydrated C{sub 3}S paste

This paper investigates the atomic and nano-scale structures of a 50-year-old hydrated alite paste. Imaged by TEM, the outer product C–S–H fibers are composed of particles that are 1.5–2 nm thick and several tens of nanometers long. {sup 29}Si NMR shows 47.9% Q{sub 1} and 52.1% Q{sub 2}, with a mean SiO{sub 4} tetrahedron chain length (MCL) of 4.18, indicating a limited degree of polymerization after 50 years' hydration. A Scanning Transmission X-ray Microscopy (STXM) study was conducted on this late-age paste and a 1.5 year old hydrated C{sub 3}S solution. Near Edge X-ray Absorption Fine Structure (NEXAFS) at Ca L{sub 3,2}-edge indicates that Ca{sup 2+} in C–S–H is in an irregular symmetric coordination, which agrees more with the atomic structure of tobermorite than that of jennite. At Si K-edge, multi-scattering phenomenon is sensitive to the degree of polymerization, which has the potential to unveil the structure of the SiO{sub 4}{sup 4−} tetrahedron chain.

36 MATERIALS SCIENCE↗

Unusual size effects from tilted twin boundaries in nano-twinned metals

Tilted twin boundaries (TBs), whose plane normals are rotated at an angle from the parent grain axis, naturally occur in columnar-grained, nano-twinned (NT) metals. Here, using a combination of atomistic simulations and analytical modeling, we reveal that NT metals with the ideal, non-tilted TBs exhibit continuously increasing strength with decreasing twin thickness, and hence, no inverse twin thickness size effect on strength. In contrast, NT metals with tilted TBs exhibit an inverse size effect, and the critical twin thickness, below which strength decreases, increases as the TB-tilt angle increases. The analysis also identifies a critical value of TB tilt, for which strength becomes independent of twin thickness and is the weakest. The transition arises from a change in dislocation activity prevailing mostly on planes inclined to TBs to planes parallel to the TBs. Overall, these findings reveal a profound influence of TB tilt angle that could redirect the analysis and engineering of nano-twin structures.

36 MATERIALS SCIENCE↗

Electrochemical performance and stability of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ infiltrated La 0.8 Sr 0.2 MnO 3 Zr 0.92 Y 0.16 O 2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

We report that the La 0.8 Sr 0.2 MnO 3 -Zr 0.92 Y 0.16 O 2-δ (LSM-YSZ) composite is the most widely used oxygen electrode for solid oxide electrochemical cells (SOCs). However, operating temperatures > 700 degrees C are required for good performance since oxygen reactions are limitied to three-phase boundaries (TPBs) because of poor ionic conductivity of LSM. Furthermore, LSM-YSZ electrodes typically delaminate during electrolysis operation leading to cell degradation. One strategy to improve SOCs with LSM-YSZ electrodes is to infiltrate a mixed ionically and electronically conducting (MIEC) material that promotes oxygen exchange. However, infiltrated materials have a nano-scale structure that may not be stable under SOC operating temperatures. Here, we report results on the infiltration of SrTi 0.3 Fe 0.6 Co 0.1 O 3-δ (STFC), a recently reported high performance MIEC, into LSM-YSZ to improve its electrochemical performance and stability at intermediate temperatures. The infiltrated STFC enhances LSM-YSZ and cell performance, typically yielding a decrease in electrode polarization resistance by a factor > 3 times, resulting in an increase in fuel cell maximum power density and electrolysis current density (at 1.3 V) by a factor > 2 times. Perhaps more significantly, the infiltrated electrodes show good performance stability, with suppression of electrode delamination during electrolysis and no evidence of coarsening or segregation induced degradation.

36 MATERIALS SCIENCE↗