Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NSLS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Applying Matlab LOCO to the NSLSII Storage Ring Commissioning

Linear Optics from Closed Orbits (LOCO) has been a powerful beam-based diagnostics and optics control method for storage rings and synchrotrons worldwide ever since it was established at NSLS by J. Safranek. This method measures the orbit response matrix and optionally the dispersion function of the machine. The data are then fitted to a lattice model by adjusting parameters such as quadrupole and skew quadrupole strengths in the model, BPM gains and rolls, corrector gains and rolls of the measurement system. Any abnormality of the machine that affects the machine optics can then be identified. The resulting lattice model is equivalent to the real machine lattice as seen by the BPMs. Since there are usually two or more BPMs per betatron period in modern circular accelerators, the model is often a very accurate representation of the real machine. According to the fitting result, one can correct the machine lattice to the design lattice by changing the quadrupole and skew quadrupole strengths. LOCO is so important that it is routinely performed at many electron storage rings to guarantee machine performance, especially after the Matlab-based LOCO code became available. The Matlab version includes a user-friendly interface, with many useful fitting and analysis options.

36 MATERIALS SCIENCE↗

LOCO Application to NSLSII SR Dispersion and Beta Beating Correction

During the short run in early July, 2014, we made changes to the Matlab LOCO setup for NSLS-II and applied LOCO successfully to the machine. The MML setup was verified with I/O tests for all quadrupole families. The LOCO setup was further tested with an intentional quadrupole error. After the successful LOCO correction, the rms beta beat was reduced from the initial values of 5.5% x and 5.6% y, to 1.9% x and 1.0% y, respectively. The rms horizontal dispersion error was reduced from 21 mm to 6 mm. It is critical to keep the same closed orbit for LOCO correction to take effect. Because presently some correctors are nearly saturated, closed orbit cannot be controlled for additional iterations. We expect LOCO to achieve better optics correction after the orbit control is improved.

36 MATERIALS SCIENCE↗

Predicted Effect of Linac Misalignments on Emmittance Growth

The NSLS-II linac was commissioned in the spring of 2012. The normalized transverse rms emittance was measured to be approximately 23 mm-mrad in single bunch mode and 20 mm-mrad in multiple bunch mode. This is larger than the design value of 16 mm-mrad. Simulations of the linac show that the emittance should be about 40% lower than measured. It has been suggested that misalignments in the linac, particularly in the low energy section are contributing to the emittance grow in the linac. This paper discusses how misalignments in the low energy section of the linac contribute to emittance growth.

36 MATERIALS SCIENCE↗

Reviewed Approach to Defining the Active Interlock Envelope for Front End Ray Tracing

To protect the NSLS-II Storage Ring (SR) components from damage from synchrotron radiation produced by insertion devices (IDs) the Active Interlock (AI) keeps electron beam within some safe envelope (a.k.a Active Interlock Envelope or AIE) in the transverse phase space. The beamline Front Ends (FEs) are designed under assumption that above certain beam current (typically 2 mA) the ID synchrotron radiation (IDSR) fan is produced by the interlocked e-beam. These assumptions also define how the ray tracing for FE is done. To simplify the FE ray tracing for typical uncanted ID it was decided to provide the Mechanical Engineering group with a single set of numbers (x,x’,y,y’) for the AIE at the center of the long (or short) ID straight section. Such unified approach to the design of the beamline Front Ends will accelerate the design process and save valuable human resources. In this paper we describe our new approach to defining the AI envelope and provide the resulting numbers required for design of the typical Front End.

36 MATERIALS SCIENCE↗

Thermal FEA for Front End Fixed Mask (SST)

The purpose of this study was to determine the temperature of the Fixed Mask using heat loads of the U42 Undulator. Finite Element Analysis was conducted on the fixed mask, to determine the temperature distribution on it, for 500 milli-amp current for NSLS-II. The Fixed mask has the sine wave surface profile.

36 MATERIALS SCIENCE↗

Longitudinal Beam Dynamics with a Higher-Harmonic Cavity for Bunch Lengthening

In Sect.1 we review the conditions of operation of an HHC system assuming its stability. We first discuss the longitudinal dynamics with an active HHC and the conditions that lead to a quartic potential in the limit of small oscillations, together with formulae giving the bunch lengthening factor and the synchrotron frequency dependence on the amplitude of the synchrotron oscillations. We discuss next passive HHC operations with uniform fillings, and distinguish the case of normal-conducting HHC, where optimal conditions of operation can be met, from the case of superconducting HHC, where optimal conditions of operation can be satisfied only approximately. In Sect.2 we address the stability of the passive superconducting 3HC system of the NSLS-II storage ring via self-consistent simulations with code SPACE. The case of nominal fractional filling of 80% is compared with the case of fractional filling of 90% and with the uniform filling case. It is shown that for values of the detuning frequency in the neighborhood of the good working point discussed in Sect.2, unstable regimes of oscillation are found, with detuning frequency threshold dependent on the gap in the filling. It is shown that the instability regime is characterized by dipole and quadrupole modes of oscillation exhibiting asymptotically nonlinear saturation. A discussion of the average bunch lengthening, together with the degree of uniformity across the bunch train, achievable under stable conditions as a function of the fractional filling concludes the paper.

36 MATERIALS SCIENCE↗

An Adaptive Gap Prototype IVU from the X9 MGU Mechanics

In consideration of affordable options to construct a prototype of an Adaptive-Gap Undulator (AGU), in which different segments along the structure may have different gaps and periods, we investigate the possible use of an existing undulator structure and mechanics from former NSLSI. An AGU is intended to allow for conforming gap clearance to the vertical "envelope" within a straight section of the NSLS-II accelerator, allowing precise tuning of its magnet array segments to the same fundamental photon energy while still satisfying impedance constraints. Placing together undulator segments with different periods and gaps portends possible undesirable effects, such as "kicks" to electron trajectories and perturbations to undulator radiation phase at the segment junctions, as well as increased impedance.

36 MATERIALS SCIENCE↗

3D Hall Probe Calibration Procedure

Hall probes are commonly used to measure local magnetic field, however they need to be calibrated. This technical note describes the accurate 3D Hall probe calibration system developed by the NSLS-II Insertion devices group at BNL. The calibration procedure and the calibration curves of an Arepoc 3D Hall probe have been presented.

36 MATERIALS SCIENCE↗

Analysis of Structural Options for Bench Measurement of AGU Segment Prototype

Refer to Tech Note TN #257 for an introduction to the mechanics and structure for the proposed prototype of a multi-segment Adaptive-Gap Undulator (AGU). Here we investigate various proposed design options for a magnet structure intended to prototype the upper and lower halves of a single segment: A) Assembly SLS-15.55-004, the historic X9 platen (0.6m long, with integral strongback) and single large centric mechanical feed-through post; B) Initial assembly SR-ID-SAGU-4300 with three pairs of feed-throughs spaced along platen length (0.7m); C) That assembly SR-ID-SAGU-4300 with increased base plate thickness. All options have “base plate” affixed to the same actuated gap-drive system with single driven axis as was on NSLS X9 MGU. As shown in Figure 1, design criteria like Gap Tolerance, Taper Error, and the critical Planarity of the pole plane within the gap are used to evaluate performance. The error in planarity to be minimized is the differential in vertical displacement (Y direction) along the Platen length (beam Z direction). Applied loads are magnetic pressure and gravity.

36 MATERIALS SCIENCE↗

Performance Improvements to the Prototype Design of the AGU

The existing design for the Magnet Structure of the prototype multi-segment AGU (Adaptive- Gap Undulator) has undergone analysis (see TN #298). To optimize performance, after review of said analysis, certain design modifications are proposed herein. A primary constraint of this proposed design is to use the existing fabricated parts from initial assembly SR-ID-SAGU-4300 with three pairs of feed-throughs spaced along the platen length of a single segment, but with foresight for the eventual multi-segment prototype. Measurements of the center segment are to be conducted on the frame and gap-drive system of the NSLS X9 MGU with its single driven axis. The eventual multi-segment prototype will also use the sister devices (X13, X27) for simultaneous measurement of both central and outboard segments at various segment gaps. Criteria effecting IVU performance like Gap Tolerance, Taper Error, and the critical Planarity of pole plane as in Figure 1 are used to evaluate the design. The error in planarity to be minimized is the deviation of vertical displacement (Y direction) with Platen length (beam Z direction).

36 MATERIALS SCIENCE↗

Coupling between interfacial charge and mechanical deformation at high temperatures in ceramics. Final report

Basic research, under this project, has led to new fundamental discoveries in the effect of electric field (and temperature) on diffusion kinetics, electroluminescence and electronic conductivity in ceramic materials. For example, yttria stabilized zirconia sinters in just seconds well below 1000°C, while, at the same time, exhibiting a highly non-linear rise in conductivity, and intense electroluminescence. The phenomenon has been shown to occur in nearly all ceramics whether they are ionic or electronic conductors, or insulators. The rise in conductivity leads to Joule heating but in-situ measurements with a platinum standard at APS and Brookhaven (NSLS-II) have shown that the temperatures are much below what would have been needed to sinter in a few seconds. We have explored the hypothesis that huge concentrations of Frenkel pairs of vacancies and interstitials are produced. While these point defects accelerate sintering (by the interstitials being transported to the pores and the vacancies to the grain boundaries), they may also produce electron-hole pairs which can impart high electrical conductivity or recombine to emit photons. Many measurements, including in-situ measurements of lattice expansion are consistent with this hypothesis. However, the energy barrier for generating Frenkels in zirconia for example is much larger than can be expected at temperature and electrical fields in these experiments. Most recent work suggests that short wavelength phonons play a critical role in the genesis of the “flash” phenomenon. For example, the Debye temperature has been shown to be the lower bound for initiating flash. Molecular dynamics simulations have shown that large concentrations of Frenkel pairs can form under the proliferation of “optical” phonons at the edge of the Brillouin zone, that is with a wavelength at or below the lattice parameter. This project has led to the development of new experimental techniques as well as a software hardware interface for process and control and data analysis in real time, with a time scale of less than one second. This approach spells a new paradigm in materials science research. It potential impact on high rate manufacturing is self evident.

36 MATERIALS SCIENCE↗

Integrated End-to-end Performance Prediction and Diagnosis for Extreme Scientific Workflows (IPPD) (Final Report)

This report details the accomplishments from the ASCR funded project “Integrated End-to-end Performance Prediction and Diagnosis for Extreme Scientific Workflows” under the award numbers FWP-66406 and DE-SC0012630, with a focus on the UC San Diego (Award No. DE-SC0012630) part of the accomplishments. We refer to the project as IPPD. The main activities of IPPD were centered on the development and integration of provenance information to capture empirically workflow information and identify the sources of bottlenecks as well as variability, and modeling and simulation to provide insights and predictively explore multiple scenarios for development of advanced techniques for optimization of resources and workflow execution. After a Phase I of the project, a Phase II effort focused on three major aspects: a) observe how data is generated, distributed, and used; b) analyze how data is (repeatedly) consumed with a focus both on repeated patterns and anomalies; and c) explore how to optimize data motion. The project leveraged and extended our existing tools with new research and demonstrated our work on the Belle II workflow suite as well as on workflows from NSLS-II.

97 MATHEMATICS AND COMPUTING↗

Design of double- and multi-bend achromat lattices with large dynamic aperture and approximate invariants

A numerical method to design nonlinear double- and multi-bend achromat (DBA and MBA) lattices with approximate invariants of motion is investigated. The search for such nonlinear lattices is motivated by Fermilab’s Integrable Optics Test Accelerator (IOTA), whose design is based on an integrable Hamiltonian system with two invariants of motion. While it may not be possible to design an achromatic lattice for a dedicated synchrotron light source storage ring with one or more exact invariants of motion, it is possible to tune the sextupoles and octupoles in existing DBA and MBA lattices to produce approximate invariants. In our procedure, the lattice is tuned while minimizing the turn-by-turn fluctuations of the Courant-Snyder actions J x and J y at several distinct amplitudes, while simultaneously minimizing diffusion of the on-energy betatron tunes. The resulting lattices share some important features with integrable ones, such as a large dynamic aperture, trajectories confined to invariant tori, robustness to resonances and errors, and a large amplitude-dependent tune-spread. Compared to the nominal NSLS-II lattice, the single- and multi-bunch instability thresholds are increased and the bunch-by-bunch feedback gain can be reduced.

43 PARTICLE ACCELERATORS↗

Evaluation of Synthetic Diamond Detectors for Fast Neutron and X-ray Detection [Slides]

Element6 has come out of a two year production pause (pre-COVID) with material that lacks their previous QC – some is excellent, but screening is needed. Applied Diamond can now make usable polycrystalline material, for applications not requiring absolute flux calibration. A large area possible (1cm 2 ). Great Lakes Crystal Technology has made great progress in two years, but still needs development to become a trusted supplier of single crystal material. LANL staff (Dongsung Kim) has developed proficient lithography and bonding expertise at CINT to make devices from vendor supplied material. LANL staff has continued and expanded capabilities for device testing at NSLS-II.

42 ENGINEERING↗

Ultracold Storage Ring

The modern ring upgrades aim at reaching beam low emittance while paying little attention to the beam energy spread. The purpose of this note is to conjecture on a possibility of designing a storage ring with ultimately small energy spread. This might be of interest with respect to the following two applications: increasing brightness and coherence of radiation at higher harmonics of undulator radiation and a potential of building a soft X-ray FEL on a storage ring. Throughout the tech note we are taking a 3 GeV storage ring of the NSLS-II size as an example.

43 PARTICLE ACCELERATORS↗

Systematic Errors Induced by Dipole Component Change in Quadrupole Beam-Based Alignment Measurements for Circular Accelerators

Beam-based alignment (BBA) for quadrupole magnets is now a well-established process for circular accelerators to steer beam orbit through the magnetic centers such that beam orbit is not disturbed when the gradients of quadrupoles are changed. At some facilities, the centers estimated from BBA techniques are also used as a proxy for steering beam through the centers of nearby nonlinear magnets to minimize degradation of nonlinear dynamics caused by off-centered orbit. The random errors associated with BBA are well known, but very little attention has been paid to the systematic error generated by a dipole component change, or equivalently a shift in the magnetic center, when the quadrupole strength is varied. The analytical formulas for this error and its amplification factor (potentially a few orders of magnitude) with respect to the magnetic center motion have been derived and confirmed with simulations. We address the significance of this error as well as the part that cannot be estimated from the beam-based measurement alone. Finally, the BBA measurements obtained at NSLS-II and their systematic errors on the order of hundreds of microns are discussed.

43 PARTICLE ACCELERATORS↗