Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Minimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Length minimization design considerations in photonic integrated circuits incorporating directional couplers

Because directional couplers involve channel waveguides which are very close to one another, transition regions to regions where channel waveguides are widely separated are utilized. The total length of a directional coupler and transition regions can be minimized for a particular degree of field confinement. Calculations presented for LiNbO3-, GaAlAs-, and SiO2/Si-based optical channel waveguides demonstrate the presence of a minimum total length corresponding to a particular degree of field confinement. The overall length at the minimum is shown to be significantly lower than for other values of field confinement allowing single-mode operation. This implies that either more devices can be integrated on a substrate or that less material is needed for an integrated optical circuit.

Boyd, Joseph T.↗
NASA NTRS1992

Minimization of vibration in elastic beams with time-variant boundary conditions

This paper presents an innovative method for minimizing the vibration of structures with time-variant boundary conditions (supports). The elastic body is modeled in two ways: (1) the first model is a letter seven type beam with a movable mass not to exceed the lower tip; (2) the second model has an arm that is a hollow beam with an inside mass with adjustable position. The complete solutions to both problems are carried out where the body is undergoing large rotation. The quasi-static procedure is used for the time-variant boundary conditions. The method developed employs partial differential equations governing the motion of the beam, including the effects of rigid-body motion, time-variant boundary conditions, and calculus of variations. The analytical solution is developed using Laplace and Fourier transforms. Examples of elastic robotic arms are given to illustrate the effectiveness of the methods developed.

Amirouche, F. M. L.↗
NASA NTRS1992

Minimizing conflicts: A heuristic repair method for constraint-satisfaction and scheduling problems

This paper describes a simple heuristic approach to solving large-scale constraint satisfaction and scheduling problems. In this approach one starts with an inconsistent assignment for a set of variables and searches through the space of possible repairs. The search can be guided by a value-ordering heuristic, the min-conflicts heuristic, that attempts to minimize the number of constraint violations after each step. The heuristic can be used with a variety of different search strategies. We demonstrate empirically that on the n-queens problem, a technique based on this approach performs orders of magnitude better than traditional backtracking techniques. We also describe a scheduling application where the approach has been used successfully. A theoretical analysis is presented both to explain why this method works well on certain types of problems and to predict when it is likely to be most effective.

Minton, Steve↗
NASA NTRS1991

Automating an orbiter approach to Space Station Freedom to minimize plume impingement

The Space shuttle orbiter Reaction Control System's (RCS) plume impingement during proximity operations with Space Station Freedom (SSF) is a structural design driver for the SSF solar panels and radiators. A study underway at JSC is investigating whether the use of an automated approach controller could result in the reduction of plume impingement induced loads during orbiter approach to SSF. Ongoing real time person-in-the-loop (PIL) simulations of an orbiter approaching the SSF show that orbiter trajectory control can vary significantly from one pilot to the next. This variation is a cause for concern since current analyses predict that plume impingement loads resulting from PIL orbiter approaches may exceed the solar panel and radiator load limits. The use of an automated approach controller is expected to reduce peak loads by both minimizing orbiter translational jet firings in certain directions and controlling the frequency at which they occur during various phases of the approach.

Spehar, Peter T.↗
NASA NTRS1992

Complex generalized minimal residual algorithm for iterative solution of quantum-mechanical reactive scattering equations

Complex dense matrices corresponding to the D + H2 and O + HD reactions were solved using a complex generalized minimal residual (GMRes) algorithm described by Saad and Schultz (1986) and Saad (1990). To provide a test case with a different structure, the H + H2 system was also considered. It is shown that the computational effort for solutions with the GMRes algorithm depends on the dimension of the linear system, the total energy of the scattering problem, and the accuracy criterion. In several cases with dimensions in the range 1110-5632, the GMRes algorithm outperformed the LAPACK direct solver, with speedups for the linear equation solution as large as a factor of 23.

Chatfield, David C.↗
NASA NTRS1992

A parameterization of minimal plants

The authors present the input-normal Riccati parameterization which allows a minimal plant (A, B, C, D) to be represented completely by its B, C, and D matrices. In addition to the basic parameterization, they present useful gradient expressions for a cost functional J(A, B, C, D) when the plant is restricted to the input-normal Riccati form. The parameterization is valid for both stable and unstable, and continuous-time and discrete-time systems.

Davis, L.↗
NASA NTRS1991

Hydrodynamic behavior and electrochemical impedance of the Hanging Meniscus Rotating Disk (HMRD) electrode. I - Meniscus shape under rotation. II - I-BIEM calculations of frequency dispersion and minimization

The shape equations for an HMRD in static and rotating configurations are developed and solved numerically. A rationale for the applicability of the standard Levich equations to the rotating case is given. The region of stability of the HMRD is examined, and the observed small negative intercept for a Levich plot is explained. The iterative boundary integral equation method is applied to the problem of frequency dispersion at an HMRD electrode. It is shown that a range of disk sizes and heights can be chosen to give almost uniform primary and secondary current distribution and minimal frequency disperison.

Cahan, Boris D.↗
NASA NTRS1958

Drag Minimization for Wings and Bodies in Supersonic Flow

The minimization of inviscid fluid drag is studied for aerodynamic shapes satisfying the conditions of linearized theory, and subject to imposed constraints on lift, pitching moment, base area, or volume. The problem is transformed to one of determining two-dimensional potential flows satisfying either Laplace's or Poisson's equations with boundary values fixed by the imposed conditions. A general method for determining integral relations between perturbation velocity components is developed. This analysis is not restricted in application to optimum cases; it may be used for any supersonic wing problem.

Heaslet, Max A↗
NASA NTRS1994

Maximizing Performance Of A Telerobot With Minimal Software

Control software system of seven-degree-of-freedom telerobot designed to elicit maximum performance from minimal, fixed-software computer at remote robot site. Includes multiple control modules, each providing parameter-driven control of specified aspect of behavior of telerobot. Software system runs in Ada language on multiple 68020 processors or potentially on single central processing unit. Conceived for use in outer space, also proves useful in underwater construction and inspection, handling of materials in nuclear facilities, and cleaning up hazardous materials.

Backes, Paul G.↗
NASA NTRS1990

Weight minimization of a support structure

This paper addresses the weight minimization of a circular plate-like structure which resulted in a 26 percent weight reduction. The optimization was performed numerically with the COPES/ADS program using the modified method of feasible directions. Design parameters were the inner thickness and outer thickness of the plate with constraints on maximum yield stress and maximum transverse displacement. Also, constraints were specified for the upper and lower bounds of the fundamental frequency and plate thicknesses. The MSC/NASTRAN finite element program was used for the evaluation of response variables. Original and final designs of the plate were tested using an Instron tension-compression machine to compare finite element results to measured strain data. The difference between finite element strain components and measured strain data was within engineering accuracy.

Kluberdanz, Donald J.↗
NASA NTRS1993

Detection of CMOS bridging faults using minimal stuck-at fault test sets

The performance of minimal stuck-at fault test sets at detecting bridging faults are evaluated. New functional models of circuit primitives are presented which allow accurate representation of bridging faults under switch-level simulation. The effectiveness of the patterns is evaluated using both voltage and current testing.

Ijaz, Nabeel↗
NASA NTRS1994

Discretized energy minimization in a wave guide with point sources

An anti-noise problem on a finite time interval is solved by minimization of a quadratic functional on the Hilbert space of square integrable controls. To this end, the one-dimensional wave equation with point sources and pointwise reflecting boundary conditions is decomposed into a system for the two propagating components of waves. Wellposedness of this system is proved for a class of data that includes piecewise linear initial conditions and piecewise constant forcing functions. It is shown that for such data the optimal piecewise constant control is the solution of a sparse linear system. Methods for its computational treatment are presented as well as examples of their applicability. The convergence of discrete approximations to the general optimization problem is demonstrated by finite element methods.

Propst, G.↗
NASA NTRS1994

Probabilistic inspection strategies for minimizing service failures

The INSIM computer program is described which simulates the 'limited fatigue life' environment in which aircraft structures generally operate. The use of INSIM to develop inspection strategies which aim to minimize service failures is demonstrated. Damage-tolerance methodology, inspection thresholds and customized inspections are simulated using the probability of failure as the driving parameter.

Brot, Abraham↗
NASA NTRS1994

Weight minimization of structural components for launch in space shuttle

Minimizing the weight of structural components of the space station launched into orbit in a space shuttle can save cost, reduce the number of space shuttle missions, and facilitate on-orbit fabrication. Traditional manual design of such components, although feasible, cannot represent a minimum weight condition. At NASA Lewis Research Center, a design capability called CometBoards (Comparative Evaluation Test Bed of Optimization and Analysis Routines for the Design of Structures) has been developed especially for the design optimization of such flight components. Two components of the space station - a spacer structure and a support system - illustrate the capability of CometBoards. These components are designed for loads and behavior constraints that arise from a variety of flight accelerations and maneuvers. The optimization process using CometBoards reduced the weights of the components by one third from those obtained with traditional manual design. This paper presents a brief overview of the design code CometBoards and a description of the space station components, their design environments, behavior limitations, and attributes of their optimum designs.

Patnaik, Surya N.↗
NASA NTRS1992

Quasi-kernel polynomials and convergence results for quasi-minimal residual iterations

Recently, Freund and Nachtigal have proposed a novel polynominal-based iteration, the quasi-minimal residual algorithm (QMR), for solving general nonsingular non-Hermitian linear systems. Motivated by the QMR method, we have introduced the general concept of quasi-kernel polynomials, and we have shown that the QMR algorithm is based on a particular instance of quasi-kernel polynomials. In this paper, we continue our study of quasi-kernel polynomials. In particular, we derive bounds for the norms of quasi-kernel polynomials. These results are then applied to obtain convergence theorems both for the QMR method and for a transpose-free variant of QMR, the TFQMR algorithm.

Freund, Roland W.↗
NASA NTRS1995

Elliptic surface grid generation on minimal and parmetrized surfaces

An elliptic grid generation method is presented which generates excellent boundary conforming grids in domains in 2D physical space. The method is based on the composition of an algebraic and elliptic transformation. The composite mapping obeys the familiar Poisson grid generation system with control functions specified by the algebraic transformation. New expressions are given for the control functions. Grid orthogonality at the boundary is achieved by modification of the algebraic transformation. It is shown that grid generation on a minimal surface in 3D physical space is in fact equivalent to grid generation in a domain in 2D physical space. A second elliptic grid generation method is presented which generates excellent boundary conforming grids on smooth surfaces. It is assumed that the surfaces are parametrized and that the grid only depends on the shape of the surface and is independent of the parametrization. Concerning surface modeling, it is shown that bicubic Hermite interpolation is an excellent method to generate a smooth surface which is passing through a given discrete set of control points. In contrast to bicubic spline interpolation, there is extra freedom to model the tangent and twist vectors such that spurious oscillations are prevented.

Spekreijse, S. P.↗
NASA NTRS1994

Minimal microwave anisotrophy from perturbations induced at late times

Aside from primordial gravitational instability of the cosmological fluid, various mechanisms have been proposed to generate large-scale structure at relatively late times, including, e.g., 'late-time' cosmological phase transitions. In these scenarios, it is envisioned that the universe is nearly homogeneous at the times of last scattering and that perturbations grow rapidly sometimes after the primordial plasma recombines. On this basis, it was suggested that large inhomogeneities could be generated while leaving relatively little imprint on the cosmic microwave background (MBR) anisotropy. In this paper, we calculate the minimal anisotropies possible in any 'late-time' scenario for structure formation, given the level of inhomogeneity observed at present. Since the growth of the inhomogeneity involves time-varying gravitational fields, these scenarios inevitably generate significant MBR anisotropy via the Sachs-Wolfe effect. Moreover, we show that the large-angle MBR anisotropy produced by the rapid post-recombination growth of inhomogeneity is generally greater than that produced by the same inhomogeneity growth via gravitational instability. In 'realistic' scenarios one can decrease the anisotropy compared to models with primordial adiabatic fluctuations, but only on very small angular scales. The value of any particular measure of the anisotropy can be made small in late-time models, but only by making the time-dependence of the gravitational field sufficiently 'pathological'.

Jaffe, Andrew H.↗