Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MgO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Auger spectroscopy of fracture surfaces of ceramics

Results of Auger electron spectroscopy (AES) studies of fracture surfaces in a series of ceramic materials, including Al2O3, MgO, and Si3N4, which were formed using different processing techniques. AES on the fractured surface of a lunar sample is also discussed. Scanning electron micrograph fractography is used to relate the surface chemistry to the failure mode. Combined argon ion sputtering and AES studies demonstrate the local variations in chemistry near the fracture surface. The problems associated with doing AES in insulators are also discussed, and the experimental techniques directed toward solving them are described.

Marcus, H. L.↗

The interior structure of Jupiter (consequences of Pioneer 10 data)

Models of the Jovian interiors are based on theoretical equations of state of hydrogen and helium supported by a few experimental points and an observed parameter such as oblateness, gravitational coefficients, heat emission, and magnetic fields. The models fall into three categories: (1) those which assume a uniform and rather low H2/He ratio throughout the planet, (2) those in which this ratio is solar and thus higher and (3) those which take into account the lack of complete miscibility of the two elements in the condensed state. Recent values of the observed parameters obtained by Pioneer 10 permit improvements of the first two models but also pose new questions. In the first category of models the new data indicate that the amount of hydrogen has to be increased, while in the solar models which have a heavy core (made of SiO2, MgO, Fe and Ni), the abundance of hydrogen has to be decreased, both changes pointing in the direction of incomplete miscibility present in the third category of models.

Smoluchowski, R.↗

The crystal chemistry of armalcolites from Apollo 17

Single-crystal X-ray studies of armacolites from the 2 to 5 mm fraction of Apollo 17 soils 75082 and 78502 are evaluated. The two types of armacolites studied show slight composition differences and identical structures. Precession photographs of each crystal show the two forms, ortho and para, to have the same space group and nearly the same cell dimensions. The analyses conducted support the proposition that the difference in optical properties is caused by differing MgO and Cr2O3 contents.

Smyth, J. R.↗

Experimental liquid line of descent and liquid immiscibility for basalt 70017

The paper describes one possible liquid line of descent produced for a high-titanium mare basalt composition through an arbitrarily chosen series of partial equilibrium and fractional crystallization experiments on basalt 70017. The liquid line of descent leading to immiscibility at 994 C is characterized by enrichment of FeO, K2O, SiO2, and MnO and depletion of MgO and TiO2 in the residual liquids. The composition of the residual liquid at the onset of immiscibility is ferrobasaltic, and the initial appearance of immiscible liquids in the form of silica-rich spherules is in the vicinity of plagioclase-liquid contacts. The integrated bulk composition of the areas of finely exsolved liquids indicates that the trend of the liquid line of descent is at a small angle to the tie lines joining the two liquids.

Rutherford, M. J.↗

Shock wave ignition of metal powders

The interaction between isolated metal particles and shock-induced flowfields is analyzed to characterize physical events and determine experimental feasibility for shock wave ignition studies. Emphasis is placed on incident shock wave phenomenon as opposed to reflected shock wave. A pre-ignition particle-flow interaction is hypothesized which presumes a vapor phase ignition reaction and an absence of significant vaporization prior to particle melting and erosion. Rapid vaporization of eroded mass is expected, with ignition reaction in the particle wakes. Experimental observation of the 6438-A Cd line and the 3721-A MgO band support the ignition mechanism hypothesized. Scattered cloud data are believed to substantiate the hypothesis that ignition delays could be correlated with predicted melting times.

Fox, T. W.↗

Accelerated heat-aging studies on fluororubber in various media

Heat-aging studies were conducted on fluororubber (copolymers of vinylidene fluoride and perfluoropropylene) using N,N-dicinnamylidene-1,6-hexanediamine, a Schiff's base of 1,6-hexanediamine, and MgO as acid acceptor. The principal technique employed was chemical stress relaxation for determining network changes brought about in the heat-aged fluororubber. This technique was backed up by swelling measurements, gel permeation chromatography, and IR spectroscopy. Stress relaxation curves are plotted for a wide range of variation in parameters (time, crosslinking density, state of curing, temperature, intermittent and continuous relaxation).

Kalfayan, S. H.↗

Composition and origin of Luna 16 aluminous mare basalts

The mineralogy and petrology of 58 lithic fragments, 52 of which are basaltic, in the Luna 16 samples were studied, with textures, and mineral and bulk compositions determined by petrographic and electron microprobe techniques. These mare basalt fragments differ from other mare basalts in being aluminous (11-20%) which results in plagioclase and (olivine) microphenocrysts; moreover, they have very low-FeO and MgO and high-CaO, FeO/MgO, and normative diopside contents.

Kurat, G.↗

Chemical constraints for mare basalt genesis

Sequential instrumental neutron activation analysis was used to study 10 Apollo-15 rake basalts for 23 bulk, minor and trace elements and 13 basaltic fragments from the Apollo-15 deep drill core 15003 Station 8 for eight major, minor and trace elements. Attention is given here to La-MgO-TiO2 correlations, La/Sm-La and Sm/Eu-La correlations, the La/Sm-Sc correlation, and basalt genesis models.

Ma, M.-S.↗

A three dimensional dynamic study of electrostatic charging in materials

A description is given of the physical models employed in the NASCAP (NASA Charging Analyzer Program) code, and several test cases are presented. NASCAP dynamically simulates the charging of an object made of conducting segments which may be entirely or partially covered with thin dielectric films. The object may be subject to either ground test or space user-specified environments. The simulation alternately treats (1) the tendency of materials to accumulate and emit charge when subject to plasma environment, and (2) the consequent response of the charged particle environment to an object's electrostatic field. Parameterized formulations of the emission properties of materials subject to bombardment by electrons, protons, and sunlight are presented. Values of the parameters are suggested for clean aluminum, Al2O3, clean magnesium, MgO, SiO2 kapton, and teflon. A discussion of conductivity in thin dielectrics subject to radiation and high fields is given, together with a sample calculation.

Katz, I.↗

Recovery and radiation corrections and time constants of several sizes of shielded and unshielded thermocouple probes for measuring gas temperature

Performance characteristics were experimentally determined for several sizes of a shielded and unshielded thermocouple probe design. The probes are of swaged construction and were made of type K wire with a stainless steel sheath and shield and MgO insulation. The wire sizes ranged from 0.03- to 1.02-mm diameter for the unshielded design and from 0.16- to 0.81-mm diameter for the shielded design. The probes were tested through a Mach number range of 0.2 to 0.9, through a temperature range of room ambient to 1420 K, and through a total-pressure range of 0.03 to 0.2.2 MPa (0.3 to 22 atm). Tables and graphs are presented to aid in selecting a particular type and size. Recovery corrections, radiation corrections, and time constants were determined.

Glawe, G. E.↗

Thermal barrier coating system

A coating system which contains a bond coating and a thermal barrier coating is applied to metal surfaces such as turbine blades and provides both low thermal conductivity and improved adherence when exposed to high temperature gases or liquids. The bond coating contains NiCrAlY and the thermal barrier coating contains a reflective oxide. The reflective oxides ZrO2-Y2O3 and ZrO2-MgO have demonstrated significant utility in high temperature turbine applications.

Stecura, S.↗

Reactions of yttria-stabilized zirconia with oxides and sulfates of various elements

The reactions between partially stabilized zirconia, containing 8 weight-percent yttria, and oxides and sulfates of various elements were studied at 1200, 1300, and 1400 C for times to 800, 400, and 200 hours, respectively. These oxides and sulfates represent impurities and additives potentially present in gas turbine fuels or impurities in the turbine combustion air as well as the elements of the substrate alloys in contact with zirconia. Based on the results, these compounds can be classified in four groups: (1) compounds which did not react with zirconia (Na2SO4, K2SO4, Cr2O3, Al2O3 and NiO); (2) compounds that reached completely with both zirconia phases (CaO, BaO, and BaSO4); (3) compounds that reacted preferentially with monoclinic zirconia (Na2O, K2O, CoO, Fe2O3, MgO, SiO2, and ZnO); and (4) compounds that reacted preferentially with cubic zirconia (V2O5, P2O5).

Zaplatynsky, I.↗

Redox equilibria of multivalent ions in silicate glasses

Experimental studies were made on the compositional dependence of the redox equilibrium of Eu in synthetic silicate liquids, together with an empirical model describing the observed compositional dependence. Electron paramagnetic resonance (EPR) was used to measure the concentration ratio of Eu(2+) to Eu(3+) in various glasses formed by rapidly quenching silicate liquids. The compositional field studied comprised mixtures of SiO2, TiO2, Al2O3, CaO, MgO, and Na2O. The proposed model describes the Eu(2+)/Eu(3+) ratio over the entire compositional field in terms of parameters easily related to each glass composition. The general applicability and utility of the model is further demonstrated by its application to the Fe(2+)-Fe(3+), Ce(3+)-Ce(4+), and Cr(3+)-Cr(6+) redox reactions in binary alkali oxide silicate glasses of Li, Na, and K.

Lauer, H. V., Jr.↗

High-silica glass inclusions in olivine of Luna-24 samples

Optical examination of nine polished grain mounts of Luna-24 drill-core material (0.09-0.50 mm size) revealed melt inclusions in olivine crystals. Two inclusions consist of clear glass with exceptionally high Si, yet contain no visible daughter minerals and have had no reaction effects with the olivine walls. Their compositions (one has SiO2 93.8, Al2O3 1.51, FeO 2.32, MgO 1.61, CaO 0.06, Na2O less than 0.05, K2O 0.11, total 99.41%; the other is similar) are unique and quite unlike the high-Si high-K melt of granitic composition that is found as inclusions in late-stage minerals of these (and the Apollo) samples, from silicate liquid immiscibility. The host olivines are Fo73 and Fo51. The origin of the melt in the inclusions and the lack of reaction effects are perplexing unsolved problems.

Roedder, E.↗

Improved performance of silicon nitride-based high temperature ceramics

Results are presented regarding experiments intended for improving the strength and toughness of hot-pressed Si3N4 (HPSN), improving the strength and oxidation resistance of reaction-sintered Si3N4 (RSSN), and improving the strength and oxidation resistance of sinterable Si-Al-O-N compositions. It is shown that the use of ZrO2 instead of MgO as a sintering aid improved the room-temperature and high-temperature flexural strength of HPSN, in addition to enhancing the rupture strength and Charpy impact resistance. The use of crushable energy absorbing layers increased the impact resistance of HPSN. Impregnation of RSSN with solutions that oxidize to Al2O3 or ZrO2 resulted in increased bending strength at room temperature. Beta-prime Si-Al-O-N sintered to full density by means of the sintering aids CeO2, Y2O3, and ZrO2 yielded the greatest strength with Y2O3 and the greatest oxidation resistance with ZrO2.

Ashbrook, R. L.↗

Near-opposition limb darkening of solids of planetary interest

Results are presented for a general laboratory study of the limb darkening at small phase angles of various materials of planetary interest, with particular attention given to the wavelength dependence of limb darkening. Only substances stable at room temperature were measured, including basalt, graphite, mixtures of MgO and charcoal powders, olivine, goethite, bronzite, CaCO3, MgSO4, BaSO4, limonite, and hematite. Previous studies aimed at determining the nature of limb darkening at opposition for different common materials are reviewed. It is found that the scattering properties of most particulate materials near phase zero can be described adequately by Minnaert's law, but that such a representation is totally inadequate for materials that tend to fracture into flakes with mirrorlike surfaces (e.g., bronzite and graphite). The results also indicate that materials such as olivine have scattering properties within deep absorption bands which exhibit definite departures from Minnaert's law at large angles of incidence or emission.

Veverka, J.↗

Coarse-grained basalt 71597 - A product of partial olivine accumulation

Rock 71597, a coarse-grained plagioclase-poikilitic basalt that contains 15.8% MgO and 19.3% modal olivine, is described. Olivine and ilmenite crystals occur in two size generations, and large subequant olivine crystals, small 'matrix' olivines, and large ilmenite crystals are characterized. Since large olivine and ilmenite crystals with skeletal habits suggestive of crystallization under relatively rapid cooling are found in a rock whose texture is consonant with slower cooling, it is suggested that the large skeletal crystals formed toward the more rapidly cooled margin of a flow and accumulated by gravitational crystal settling toward the flow's interior. In support of this hypothesis, calculations indicate that the observed olivine compositions are approximately 10 mol% too Fe-rich to have crystallized from a melt of composition corresponding to that of 71597.

Warner, R. D.↗

Thermal barrier coatings: Burner rig hot corrosion test results

A Mach 0.3 burner rig test program was conducted to examine the sensitivity of thermal barrier coatings to Na and V contaminated combustion gases simulating potential utility gas turbine environments. Coating life of the standard ZrO2-12Y2O3/Ni-16.2Cr-5.6Al-0.6Y NASA thermal barrier coating system which was developed for aircraft gas turbines was significantly reduced in such environments. Two thermal barrier coating systems, Ca2SiO4/Ni-16.2Cr-5.6Al-0.6Y and ZrO2-8Y2O3/Ni-16.4Cr-5.1Al-0.15Y and a less insulative cermet coating system, 50 volume percent MgO-50 volume percent Ni-19.6Cr-17.1Al-0.97Y/Ni-16.2Cr-5.6Al-0.6Y, were identified as having much improved corrosion resistance compared to the standard coating.

Hodge, P. E.↗