Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MIMIC models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Kinetic Monte Carlo simulation of the aging of nanoporous metals.

Nanoporous metallic particles are of great interest for a range of applications including catalysis, gas storage, and electrical energy storage. In particular, recent work has shown that bulk powders of porous palladium can be synthesized in a scalable fashion. This material has pore sizes in the 2-5 nm range and has promise for use in hydrogen storage applications. However, because of the small pore size such materials are very susceptible to morphological evolution during aging, especially at elevated temperatures, leading to degradation of their storage properties. To better understand and predict the phenomena at work in nanoporous metal aging, we have developed a kinetic Monte Carlo (kMC) model for the simulation of atomic diffusion in a Pd lattice. The model is implemented in Sandia's parallelized kMC code SPPARKS. SPPARKS utilizes a spatial decomposition parallelization scheme, allowing large-scale simulations including millions of atoms. The diffusion model includes single-atom hops as well as Schwoebel barrier events that mimic concerted atom motions involving multiple lattice sites. Our simulations show that for statistically homogeneous nanoporous networks, coarsening at elevated temperature as measured by the surface area can be described by a scaling law that closely follows the L {approx} {sup 1/4} scaling predicted by continuum surface diffusion theory. This scaling holds despite the presence of surface faceting due to our simulations being run at temperatures below the roughening temperature of the material. Sensitivities of the rate of coarsening, the scaling exponent, and the amount of surface faceting to model parameters including temperature and event activation rates are explored. Because of the large spatial scales attainable in our computations, we are able to simulate nanoporous particle geometries similar to those synthesized in the laboratory, and compare directly to material aging experiments including porosimetry measurements and TEM images of particles.

08 HYDROGEN↗

Full-Loop Simulation of the Combustion of Biomass in a Circulating Fluidized Bed Combustor

Interest in circulating fluidized bed (CFB) boilers as a power generation technology has skyrocketed in recent years because of several advantages this technology offers over conventional boilers, such as increased gas-solid mixing, which results in higher combustion efficiency, and the ability to use lower rank fuels. CFB combustors are operated at lower temperatures than conventional thermal power generation combustors, thus reducing NO x emissions, while SO 2 emissions can be conveniently controlled through the addition of Ca-based sulfur sorbents within the combustor. This report summarizes the development of a comprehensive computational fluid dynamics (CFD) model for biomass combustion in a 50 kW th CFB combustor employing the multiphase particle-in-cell (PIC) approach in the open-source Multiphase Flow with Interphase eXchanges (MFiX) Software Suite at the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The experimental combustor was designed, built, and operated at CanmetENERGY, Natural Resources Canada in Ottawa, Canada. This work is the culmination of a multi-year collaboration between NETL and CanmetENERGY. The hydrodynamics in the full loop are validated against cold-flow experiments conducted at CanmetENERGY. To mimic the dense packing in the standpipe in the absence of a collisional model in the MFiX-PIC approach, the ram valve in the return leg is partially closed to obstruct the flow. A combustion reaction scheme was developed that considers the volatiles released by the fuel as a lumped species that fully converts to CO 2 and H 2 O. The so-called enhanced simplified combustion scheme produces an excellent match with experimental data in terms of the species concentrations of CO 2 and O 2 at the outlet and the freeboard, demonstrating the utility of the comprehensive model for a range of flow conditions and operating temperatures. Furthermore, the model can be readily adapted to simulate combustion of a variety of biomass fuels as well as co-fired systems under air and oxy-fuel conditions.

09 BIOMASS FUELS↗

Considering computational speed vs. accuracy: Choosing appropriate mesoscale RVE boundary conditions

Modeling a material’s microstructure using continuum theories allows for inspection of the relationship between coarse scale and fine scale behaviors. Computational limits generally require selection of a sub-volume from a bulk sample in order to directly model the microstructure. Boundary conditions are applied to the sub-volume to mimic the excluded bulk material. Appropriate selection of boundary conditions helps effectively determine the appropriate spatial scale required of the sub-volume. Applicable boundary conditions include direct displacement, periodic, and uniform traction. While direct displacement and periodic boundary conditions are commonly used, uniform traction boundary conditions have seen limited use due to rigid body stability issues in simulations of compression or shear deformation. A new application of uniform traction boundary conditions was developed through linear constraint equations, similar to approaches employed by direct displacement and periodic boundary conditions, to quench rigid body motions with minimal interference of the relative deformation of the model. These boundary conditions were tested by compressing several synthetically generated periodic microstructures using the finite element method. Evaluating the effective stiffness along the compression axis, the direct displacement boundary condition produced the stiffest response, whereas the uniform traction boundary condition produced the most compliant. Periodic boundary conditions produced the same response for all volumes analyzed and both the direct displacement and uniform traction boundary conditions trended toward the periodic response as the domain volume increased. Computational performance was also evaluated for each boundary condition using implicit and explicit solvers. Direct displacement boundary conditions presented the lowest computational cost of all of the boundary conditions followed by periodic then uniform traction. The computational expense of periodic and uniform traction boundary conditions limited the viable spatial scale and mesh resolutions able to be simulated. Selection of appropriate boundary conditions for specific uses need to be a balance between allowable computational expense and accuracy of the method. Techniques for evaluating which boundary conditions to use are discussed.

42 ENGINEERING↗

Parallel discrete event simulation: A shared memory approach

With traditional event list techniques, evaluating a detailed discrete event simulation model can often require hours or even days of computation time. Parallel simulation mimics the interacting servers and queues of a real system by assigning each simulated entity to a processor. By eliminating the event list and maintaining only sufficient synchronization to insure causality, parallel simulation can potentially provide speedups that are linear in the number of processors. A set of shared memory experiments is presented using the Chandy-Misra distributed simulation algorithm to simulate networks of queues. Parameters include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential simulation of most queueing network models.

Reed, Daniel A.↗

Map-level baryonification: unified treatment of weak lensing two-point and higher-order statistics

Precision cosmology benefits from extracting maximal information from cosmic structures, motivating the use of higher-order statistics (HOS) at small spatial scales. However, predicting how baryonic processes modify matter statistics at these scales has been challenging. The baryonic correction model (BCM) addresses this by modifying dark-matter-only simulations to mimic baryonic effects, providing a flexible, simulation-based framework for predicting both two-point and HOS. We show that a 3-parameter version of the BCM can jointly fit weak lensing maps' two-point statistics, wavelet phase harmonics coefficients, scattering coefficients, and the third and fourth moments to within 2% accuracy across all scales ℓ < 2000 and tomographic bins for a DES-Y3-like redshift distribution ( z ≲ 2), using the FLAMINGO simulations. These results demonstrate the viability of BCM-assisted, simulation-based weak lensing inference of two-point and HOS, paving the way for robust cosmological constraints that fully exploit non-Gaussian information on small spatial scales.

79 ASTRONOMY AND ASTROPHYSICS↗

A hydrological emulator for global applications – HE v1.0.0

Abstract. While global hydrological models (GHMs) are very useful in exploring water resources and interactions between the Earth and human systems, their use often requires numerous model inputs, complex model calibration, and high computation costs. To overcome these challenges, we construct an efficient open-source and ready-to-use hydrological emulator (HE) that can mimic complex GHMs at a range of spatial scales (e.g., basin, region, globe). More specifically, we construct both a lumped and a distributed scheme of the HE based on the monthly abcd model to explore the tradeoff between computational cost and model fidelity. Model predictability and computational efficiency are evaluated in simulating global runoff from 1971 to 2010 with both the lumped and distributed schemes. The results are compared against the runoff product from the widely used Variable Infiltration Capacity (VIC) model. Our evaluation indicates that the lumped and distributed schemes present comparable results regarding annual total quantity, spatial pattern, and temporal variation of the major water fluxes (e.g., total runoff, evapotranspiration) across the global 235 basins (e.g., correlation coefficient r between the annual total runoff from either of these two schemes and the VIC is >0.96), except for several cold (e.g., Arctic, interior Tibet), dry (e.g., North Africa) and mountainous (e.g., Argentina) regions. Compared against the monthly total runoff product from the VIC (aggregated from daily runoff), the global mean Kling–Gupta efficiencies are 0.75 and 0.79 for the lumped and distributed schemes, respectively, with the distributed scheme better capturing spatial heterogeneity. Notably, the computation efficiency of the lumped scheme is 2 orders of magnitude higher than the distributed one and 7 orders more efficient than the VIC model. A case study of uncertainty analysis for the world's 16 basins with top annual streamflow is conducted using 100 000 model simulations, and it demonstrates the lumped scheme's extraordinary advantage in computational efficiency. Our results suggest that the revised lumped abcd model can serve as an efficient and reasonable HE for complex GHMs and is suitable for broad practical use, and the distributed scheme is also an efficient alternative if spatial heterogeneity is of more interest.

Liu, Yaling↗

COMPLEX STRUCTURE IN CLASS 0 PROTOSTELLAR ENVELOPES. III. VELOCITY GRADIENTS IN NON-AXISYMMETRIC ENVELOPES, INFALL, OR ROTATION?

We present an interferometric kinematic study of morphologically complex protostellar envelopes based on observations of the dense gas tracers N{sub 2}H{sup +} and NH{sub 3}. The strong asymmetric nature of most envelopes in our sample leads us to question the common interpretation of velocity gradients as rotation, given the possibility of projection effects in the observed velocities. Several 'idealized' sources with well-ordered velocity fields and envelope structures are now analyzed in more detail. We compare the interferometric data to position-velocity (PV) diagrams of kinematic models for spherical rotating collapse and filamentary rotating collapse. For this purpose, we developed a filamentary parameterization of the rotating collapse model to explore the effects of geometric projection on the observed velocity structures. We find that most envelopes in our sample have PV structures that can be reproduced by an infalling filamentary envelope projected at different angles within the plane of the sky. The infalling filament produces velocity shifts across the envelope that can mimic rotation, especially when viewed at single-dish resolutions and the axisymmetric rotating collapse model does not uniquely describe any data set. Furthermore, if the velocities are assumed to reflect rotation, then the inferred centrifugal radii are quite large in most cases, indicating significant fragmentation potential or more likely another component to the line-center velocity. We conclude that ordered velocity gradients cannot be interpreted as rotation alone when envelopes are non-axisymmetric and that projected infall velocities likely dominate the velocity field on scales larger than 1000 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling the Collisional-Plastic Stress Transition for Bin Discharge of Granular Material

We propose a heuristic model for the transition between collisional and frictional/plastic stresses in the flowof granular material. Our approach is based on a physically motivated, nonlinear ‘blending’ function that produces aweighted average of the limiting stresses, depending on the local void fraction in the flow field. Previously publishedstress models are utilized to describe the behavior in the collisional (Lun et al., 1984) and quasi-static limits (Schaeffer,1987 and Syamlal et al., 1993). Sigmoidal and hyperbolic tangent functions are used to mimic the observed smooth yetrapid transition between the collisional and plastic stress zones. We implement our stress transition model in an opensourcemultiphase flow solver, MFIX (Multiphase Flow with Interphase eXchanges, www.mfix.org) and demonstrate itsapplication to a standard bin discharge problem. The model’s effectiveness is illustrated by comparing computationalpredictions to the experimentally derived Beverloo correlation. With the correct choice of function parameters, themodel predicts bin discharge rates within the error margins of the Beverloo correlation and is more accurate than one ofthe alternative granular stress models proposed in the literature. Although a second granular stress model in the literatureis also reasonably consistent with the Beverloo correlation, we propose that our alternative blending function is likely tobe more adaptable to situations with more complex solids properties (e.g., ‘sticky’ solids).

42 ENGINEERING↗

Biomimetics as a Model for Inspiring Human Innovation

Electroactive polymers (EAP) are human made actuators that are the closest to mimic biological muscles. Technology was advanced to the level that biologically inspired robots are taking increasing roles in the world around us and making science fiction ideas a closer engineering reality. Artificial technologies (AI, AM, and others) are increasingly becoming practical tools for making biologically inspired devices and instruments with enormous potential for space applications. Polymer materials are used to produce figures that resemble human and animals. These materials are widely employed by the movie industry for making acting figures and by the orthopedic industry to construct cyborg components. There are still many challenges ahead that are critical to making such possibilities practical. The annual armwrestling contest is providing an exciting measure of how well advances in EAP are implemented to address the field challenges. There is a need to document natures inventions in an engineering form to possibly inspire new capabilities.

Electroactive Polymers (EAP)↗

On the effect of mixing-driven vaporization in a homogeneous relaxation modeling framework

The homogeneous relaxation model (HRM) is one of the most widely used models to describe the liquid–gas phase transition in multiphase flows due to the occurrence of cavitation. However, in its original formulation, the HRM does not account for the presence of ambient gas species, which generally limits its applicability to the injector's internal flow where ambient gases are negligible. In this work, a mixing-driven vaporization (MDV) model was developed to extend the capability of the HRM in handling the mixing effect in the regions external to the nozzle, where vapor–liquid equilibrium for multi-species mixtures of fuel and ambient gas is considered. Herein, to assess the model performance, simulations of the Engine Combustion Network's Spray G injector were performed with the HRM and the MDV model under both flash-boiling and evaporating conditions. It was found that the MDV model led to a better match against x-ray measurements of fuel density in the near-nozzle region. In contrast to the HRM, the MDV model was able to reproduce the vaporization process in the mixing zone at the edge of the fuel jet, which aligns with the expected physics. This resulted in substantial differences in the prediction of other flow characteristics such as mixture temperature and pressure. Furthermore, this work demonstrates that evaporation timescales have a considerable effect on the MDV model's predictions, as shown by a parametric study in which a time factor was introduced to mimic the effect of different timescales due to different phase change mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MiR-138/SIRT1 axis is implicated in impaired learning and memory abilities of cerebral ischemia/reperfusion injured rats

The present study aimed to explore whether deregulated miR-138 is implicated in cerebral I/R injury-impaired learning and memory abilities. Rats were subjected to bilateral common carotid occlusion followed by reperfusion to induce cerebral I/R injury. A model of oxygen-glucose deprivation and reperfusion (OGD/R) was conducted to mimic cerebral I/R conditions in vitro. MiR-138 expression levels were reduced in the hippocampus of cerebral I/R injured rats. Inhibition of miR-138 ameliorated the impaired learning and memory abilities of rats, and promoted autophagy and thus attenuated apoptosis in the OGD/R-treated hippocampal neurons. Moreover, miR-138 targets the 3′-UTR of SIRT1 and repressed its expression. These results showed that miR-138 could improve the learning and memory abilities via promoting autophagy under cerebral I/R injured conditions.

60 APPLIED LIFE SCIENCES↗

Modular invariant inflation

Modular invariance is a striking symmetry in string theory, which may keep stringy corrections under control. In this paper, we investigate a phenomenological consequence of the modular invariance, assuming that this symmetry is preserved as well as in a four dimensional (4D) low energy effective field theory. As a concrete setup, we consider a modulus field T whose contribution in the 4D effective field theory remains invariant under the modular transformation and study inflation drived by T. The modular invariance restricts a possible form of the scalar potenntial. As a result, large field models of inflation are hardly realized. Meanwhile, a small field model of inflation can be still accomodated in this restricted setup. The scalar potential traced during the slow-roll inflation mimics the hilltop potential V{sub ht}, but it also has a non-negligible deviation from V{sub ht}. Detecting the primordial gravitational waves predicted in this model is rather challenging. Yet, we argue that it may be still possible to falsify this model by combining the information in the reheating process which can be determined self-completely in this setup.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Digital Rock Studies of Tight Porous Media

This technical report summarizes some recently developed approaches to studies of rock properties at a pore scale. Digital rock approach is complementary to laboratory and field studies. It can be especially helpful in situations where experimental data are uncertain, or are difficult or impossible to obtain. Digitized binary images of the pore geometries of natural rocks obtained by different imaging techniques are the input data. Computer-generated models of natural rocks can be used instead of images in a case where microtomography data are unavailable, or the resolution of the tools is insufficient to adequately characterize the features of interest. Simulations of creeping viscous flow in pores produce estimates of Darcy permeability. Maximal Inscribed Spheres calculations estimate two-phase fluid distribution in capillary equilibrium. A combination of both produce relative permeability curves. Computer-generated rock models were employed to study two-phase properties of fractured rocks, or tight sands with slit-like pores, too narrow to be characterized with micro-tomography. Various scenarios can simulate different fluid displacement mechanisms, from piston-like drainage to liquid dropout at the dew point. A finite differences discretization of Stokes equation is developed to simulate flow in the pore space of natural rocks. The numerical schemes are capable to handle both no-slip and slippage flows. An upscaling procedure estimates the permeability by subsampling a large data set. Capillary equilibrium and capillary pressure curves are efficiently estimated with the method of maximal inscribed spheres both an arbitrary contact angle. The algorithms can handle gigobytes of data on a desktop workstation. Customized QuickHull algorithms model natural rocks. Capillary pressure curves evaluated from computer-generated images mimic those obtained for microtomography data.

54 ENVIRONMENTAL SCIENCES↗

Rat Cardiovascular Responses to Whole Body Suspension: Head-down and Non-Head-Down Tilt

The rat whole body suspension technique mimics responses seen during exposure to microgravity and was evaluated as a model for cardiovascular responses with two series of experiments. In one series, changes were monitored in chronically catheterized rats during 7 days of Head-Down Tilt (HDT) or Non-Head-Down Tilt (N-HDT) and after several hours of recovery. Elevations of mean arterial (MAP), systolic, and diastolic pressures of approx. 20 % (P less than 0.05) in HDT rats began as early as day 1 and were maintained for the duration of suspension. Pulse pressures were relatively unaffected, but heart rates were elevated approx. 10 %. During postsuspension (2-7 h), most cardiovascular parameters returned to presuspension levels. N-HDT rats exhibited elevations chiefly on days 3 and 7. In the second series, blood pressure was monitored in 1- and 3-day HDT and N-HDT rats to evaluate responses to rapid head-up tilt. MAP, systolic and diastolic pressures, and HR were elevated (P less than 0.05) in HDT and N-HDT rats during head-up tilt after 1 day of suspension, while pulse pressures remained un changed. HDT rats exhibited elevated pretilt MAP and failed to respond to rapid head-up tilt with further increase of MAP on day 3, indicating some degree of deconditioning. The whole body suspended rat may be useful as a model to better understand responses of rats exposed to microgravity.

Musacchia, X. J.↗

The Three-Dimensional Combustion of Heterogeneous Propellants

A numerical framework is described which permits the calculation of the 3-D combustion field supported by a heterogeneous propellant, allowing for complete coupling between the condensed phase physics, the gas-phase physics, and the unsteady, uneven, regressing surface. A random packing algorithm is used to construct models of ammonium-perchlorate in hydroxyl-terminated-polybutadiene propellants which mimic experimental propellants designed by R. Miller, and these are numerically burnt. Mean burning rates are compared with experimental data for four packs, over a pressure range of 7-200atm.

Massa, L.↗

Numerical Simulations on Origin of Galilean Moons' Magnetic Anomalies

Galileo mission detected the magnetic anomalies originated from Galilean moons. These anomalies are likely generated in the moons interiors, under the influence of a strong ambient Jovian field. Among various possible generation mechanisms of the anomalies, we focus on magneto-convection and dynamos in the interiors via numerical simulation. To mimic the electromagnetic environment of the moons, we introduce in our numerical model an external uniform magnetic field B(sub 0) with a fixed orientation but varying field strength. Our results show that a finite B(sub 0) can substantially alter the dynamo processes inside the core. When the ambient field strength B(sub 0) increases to approximately 40% of the field generated by the pure dynamo action, the convective state in the core changes significantly: the convective flow decreases by 80% in magnitude, but the differential rotation becomes stronger in much of the fluid layer, leading to a stronger field generated in the core. The field morphologies inside the core tend to align with the ambient field, while the flow patterns show the symmetry-breaking effect under the influence of B(sub 0). Furthermore, the generated field tends to be temporally more stable.

Jiao, LiQuo↗