Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC CONFINEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

First application of a digital mirror Langmuir probe for real-time plasma diagnosis

For the first time, a digital Mirror Langmuir probe (MLP) has successfully sampled plasma temperature, ion saturation current, and floating potential together on a single probe tip in real time in a radio-frequency driven helicon linear plasma device. This is accomplished by feedback control of the bias sweep to ensure a good fit to I-V characteristics with a high frequency, high power digital amplifier and field-programmable gate array (FPGA) controller. Measurements taken by the MLP were validated by a low speed I-V characteristic manually collected during static plasma conditions. Plasma fluctuations, induced by varying the axial magnetic field (f̃ = 10 Hz), were also successfully monitored with the MLP. Further refinement of the digital MLP pushes it towards a turn-key system that minimizes the time to deployment and lessens the learning curve, positioning the digital MLP as a capable diagnostic for the study of low radio-frequency plasma physics. These demonstrations bolster confidence in fielding such digital MLP diagnostics in magnetic confinement experiments with high spatial and adequate temporal resolution such as edge plasma, scrape-off layer, and divertor probes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression of first-wall interaction in negative triangularity plasmas on TCV

Magnetically confined fusion plasmas with negative triangularity (d) exhibit greater L-mode confinement than with positive d. Recent experiments in the TCV and DIII-D tokamaks have correlated the confinement improvement to a reduction of fluctuations within the plasma core. We report on fluctuation measurements in the scrape-off layer (SOL) for −0.61 < d < +0.64 in limited and diverted ohmic L-mode plasmas; these reveal a strong reduction in SOL fluctuation amplitudes at d < −0.25, and, surprisingly, an almost full suppression of plasma interaction with the main-chamber first-wall, which could have important implications for the prospects of using negative d plasmas as a reactor solution. An exploration of several physical mechanisms suggests that a reduced connection length—intrinsic to negative d plasmas—plays a critical role in the origin of this phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical and computational studies on the scattering of radio frequency waves by fluctuations

The practical and economic viability of tokamak fusion reactors depends, in a significant way, on the efficiency of radio frequency (RF) waves to deliver energy and momentum to the plasma in the core of the reactor. Among the various attributes of RF waves is their ability to heat magnetically confined plasmas, induce plasma currents in an effort to achieve steady state, and modify the current profile so as to control plasma instabilities like the neoclassical tearing modes. The RF electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the turbulent plasma in the scrape-off layer (SOL) along their path to the core plasma. While the propagation and damping of RF waves in the core is reasonably well understood, the same is not true for RF propagation through the SOL. In present day fusion devices, the radial width of the SOL is of the order of a few centimeters. In ITER and in future fusion reactors this width will be of the order of tens of centimeters. Any deleterious effects on RF waves due to plasma turbulence in the SOL has to be properly understood in order to optimize the delivery of RF energy and momentum into the core. This paper is on a multi-pronged approach that is being pursued to quantify the effect of SOL plasma on RF waves. The SOL is composed of coherent filamentary, or blob like, structures and incoherent fluctuations. For coherent structures a full-wave theoretical model has been developed. This model is used to benchmark computational codes that are subsequently used to study general distribution of filaments, thereby extending the range of the theoretical formulation. For incoherent fluctuations, a common approach towards quantifying the effects of turbulence is the Kirchhoff technique. This technique is based on physical optics and the wave fields at any point on a spatially varying surface are approximated to be the same as the fields on a tangent plane at that point. The results from the theoretical analysis are compared with full-wave numerical simulations for incoherent fluctuations. The final part of these studies is to construct the effective permittivity of a turbulent plasma that is a mix of coherent and incoherent fluctuations. Towards this end, the ``effective medium approximation'' is being used to construct the permittivity of the turbulent plasma that will be used in full-wave and physical optics studies of scattering. All these approaches are distinctly different from previous studies on the RF wave propagation through turbulent plasmas. The theory and computations discussed in this paper apply to RF waves in any frequency range and for arbitrary variations in density, and reveal new and important physical insights into the scattering of RF waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-species collisions for delta-f gyrokinetic simulations: Implementation and verification with GENE

A multi-species linearized collision operator based on the model developed by Sugama et al. has been implemented in the nonlinear gyrokinetic code, GENE. Such a model conserves particles, momentum, and energy to machine precision, and is shown to have negative definite free energy dissipation characteristics, satisfying Boltzmann’s H-theorem, including for realistic mass ratio. Finite Larmor Radius (FLR) effects have also been implemented into the local version of the code. For the global version of the code, the collision operator has been developed to allow for block-structured velocity space grids, allowing for computationally tractable collisional global simulations. The validity of the collision operator has been demonstrated by relaxation and conservation tests, as well as appropriate benchmarks. The newly implemented operator shall be used in future simulations to study magnetically confined fusion plasma turbulence and transport in more extreme regions with higher collisionality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inference of Experimental Radial Impurity Transport on Alcator C-Mod: Bayesian Parameter Estimation and Model Selection.

We present a fully Bayesian approach for the inference of radial profiles of impurity transport coefficients and compare its results to neoclassical, gyrofluid and gyrokinetic modeling. Using nested sampling, the Bayesian Impurity Transport InferencE (BITE) framework can handle complex parameter spaces with multiple possible solutions, offering great advantages in interpretative power and reliability with respect to previously demonstrated methods. BITE employs a forward model based on the pySTRAHL package, built on the success of the well-known STRAHL code [Dux, IPP Report, 2004], to simulate impurity transport in magnetically-confined plasmas. In this paper, we focus on calcium (Ca, Z=20) Laser Blow-Off injections into Alcator C-Mod plasmas. Multiple Ca atomic lines are diagnosed via high-resolution X-ray Imaging Crystal Spectroscopy and Vacuum Ultra-Violet measurements. We analyze a sawtoothing I-mode discharge for which neoclassical and turbulent (quasilinear and nonlinear) predictions are also obtained. We find good agreement in diffusion across the entire radial extent, while turbulent convection and density profile peaking are estimated to be larger in experiment than suggested by theory. Efforts and challenges associated with the inference of experimental pedestal impurity transport are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the correlation between ‘non-local’ effects and intrinsic rotation reversals in Alcator C-Mod

Contemporary predictive models for heat and particle transport in tokamak plasmas are based on the assumption that local fluxes can be described in terms of local plasma parameters, where electromagnetic drift-wave-type turbulence is driven by local gradients and results in cross-field transport. The question of whether or not transport could be dominated by non-local terms in certain circumstances is essential for our understanding of transport in magnetically confined plasmas, and critical for developing predictive models for future tokamaks, such as ITER. Perturbative transport experiments using cold-pulse injections at low density seem to challenge the local closure of anomalous transport: a rapid temperature increase in the core of the plasma following a sharp edge cooling is widely observed in tokamaks and helical devices. Past work in Ohmic plasmas in Alcator C-Mod and in ECH plasmas in KSTAR found that the temperature inversions disappear at higher densities, above the intrinsic toroidal rotation reversal density. These observations suggested that the so-called 'non-local' heat transport effects were related to the intrinsic rotation reversal, and therefore to changes in momentum transport. In this work, new experiments and analysis at Alcator C-Mod show that intrinsic rotation reversals and disappearance of temperature inversions are not concomitant in Ohmic plasmas at high plasma current and in ICRH L-modes. This new data set shows that the correlation between transient temperature inversions and intrinsic rotation reversals is not universal, suggesting that 'non-local' heat transport and momentum transport effects may be affected by different physical mechanisms.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Outlier classification using autoencoders: application for fluctuation driven flows in fusion plasmas

Understanding the statistics of fluctuation driven flows in the boundary layer of magnetically confined plasmas is desired to accurately model the lifetime of the vacuum vessel components. Mirror Langmuir probes (MLPs) are a novel diagnostic that uniquely allow us to sample the plasma parameters on a time scale shorter than the characteristic time scale of their fluctuations. Sudden large-amplitude fluctuations in the plasma degrade the precision and accuracy of the plasma parameters reported by MLPs for cases in which the probe bias range is of insufficient amplitude. While some data samples can readily be classified as valid and invalid, we find that such a classification may be ambiguous for up to 40% of data sampled for the plasma parameters and bias voltages considered in this study. In this contribution, we employ an autoencoder (AE) to learn a low-dimensional representation of valid data samples. By definition, the coordinates in this space are the features that mostly characterize valid data. Ambiguous data samples are classified in this space using standard classifiers for vectorial data. In this way, we avoid defining complicated threshold rules to identify outliers, which require strong assumptions and introduce biases in the analysis. By removing the outliers that are identified in the latent low-dimensional space of the AE, we find that the average conductive and convective radial heat fluxes are between approximately 5% and 15% lower as when removing outliers identified by threshold values. For contributions to the radial heat flux due to triple correlations, the difference is up to 40%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heating of pinch devices with lasers

Pinch devices under laser heating, determining plasma density and temperature and confining magnetic field strength with thermodynamic model

Vlases, G. C.↗

Electron impact excitation of Hg/+/

A crossed charged beam technique was employed in the investigation reported. The ion beam was crossed at right angles by a magnetically confined electron beam. Cross sections were determined as a function of electron impact energy. Considerable structure in the excitation cross section appears immediately above the threshold. It is pointed out that a primary application of cross sections is related to the calculation of plasma rate coefficients.

Crandall, D. H.↗

On the magnetic mirroring as the basic cause of parallel electric fields

Among the different proposed mechanisms for generating parallel electric fields, magnetic mirroring of charged particles seems to be the most plausible. In the present paper, it is suggested that magnetic mirroring is the basic cause of parallel electric fields in the magnetosphere and that the magnetic mirroring effect may be able to form the basis of an auroral theory that can remove a major portion of the ambiguity of observations. In the model proposed, the parallel electric field is due to a magnetic confinement of a negatively charged hot collision-free plasma. A transfer of electron gyroenergy into wave energy tends to weaken this confinement; if this energy transfer becomes too strong, the parallel potential gradient will break down. Hence, from this model, in contrast to certain other models of parallel electric fields, only a small fraction of the total auroral particle energy may be expected to be transformed into electromagnetic wave energy during the acceleration process.

Lennartsson, W.↗

Selection of alternative central-station technologies for the Satellite Power System (SPS) comparative assessment

An important effort is the Satellite Power System (SPS) comparative Assessment is the selection and characterization of alternative technologies to be compared with the SPS concept. The ground rules, criteria, and screening procedure applied in the selection of those alternative technologies are summarized. The final set of central station alternatives selected for comparison with the SPS concept includes: (1) light water reactor with improved fuel utilization, (2) conventional coal combustion with improved environmental controls, (3) open cycle gas turbine with integral low Btu gasifier, (4) terrestrial photovoltaic, (5) liquid metal fast breeder reactor, and (6) magnetic confinement fusion.

Samsa, M.↗

Magnetoacoustic heating by ion Landau damping

The Vlasov-fluid model of Freidberg (1972) is used to study the resonance heating of a sharp-boundary screw pinch. The analysis provides the first treatment of the magnetoacoustic heating of a cylindrical plasma by means of ion Landau damping, which was identified as a viable dissipative mechanism for the conversion of magnetoacoustic wave energy into ion thermal energy. In addition, local and global energy conservation are considered, and formulae and numerical results for the thermal energy doubling time and the associated induced rf electric fields are presented. It is shown that collisionless absorption can provide a heating mechanism when an equilibrium plasma column is pumped by oscillations of the confining magnetic field at a frequency near the oblique magnetoacoustic frequency.

Turner, L.↗

Study program for design improvements of the X-3060 klystron. Phase 3: Electron gun fabrication and beam analyzer evaluation. Phase 4: Klystron prototype fabrication and testing

A full scale model was produced to verify suggested design changes. Through beam analyzer study, the correct electron beam diameter and cross sectional profile were established in conjunction with the desired confining magnetic field. Comparative data on the performance of the X-3060 klystron, design predictions for the improved klystron, and performance data taken during acceptance testing of the prototype VKS-8274 JPL are presented.

Goldfinger, A.↗

Comparative health and safety assessment of the SPS and alternative electrical generation systems

A comparative analysis of health and safety risks is presented for the Satellite Power System and five alternative baseload electrical generation systems: a low-Btu coal gasification system with an open-cycle gas turbine combined with a steam topping cycle; a light water fission reactor system without fuel reprocessing; a liquid metal fast breeder fission reactor system; a central station terrestrial photovoltaic system; and a first generation fusion system with magnetic confinement. For comparison, risk from a decentralized roof-top photovoltaic system with battery storage is also evaluated. Quantified estimates of public and occupational risks within ranges of uncertainty were developed for each phase of the energy system. The potential significance of related major health and safety issues that remain unquantitied are also discussed.

Habegger, L. J.↗