Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “M CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Low-speed Aerodynamic Investigations of a Hybrid Wing Body Configuration

Two low-speed static wind tunnel tests and a water tunnel static and dynamic forced-motion test have been conducted on a hybrid wing-body (HWB) twinjet configuration. These tests, in addition to computational fluid dynamics (CFD) analysis, have provided a comprehensive dataset of the low-speed aerodynamic characteristics of this nonproprietary configuration. In addition to force and moment measurements, the tests included surface pressures, flow visualization, and off-body particle image velocimetry measurements. This paper will summarize the results of these tests and highlight the data that is available for code comparison or additional analysis.

Vicroy, Dan D.↗
NASA NTRSDate not supplied

Streamlining GNC Architecture Development and FSW Integration forthe Mars Ascent Vehicle

The Mars Ascent Vehicle (MAV) will be the first vehicle to perform an ascent from the surface ofanother atmospheric planetary body outside of the Earth-Moon system. Significant light-time delayrequires complete autonomy of flight throughout ascent, and naturally a high level of reliability isdesired in both MAV’s hardware and software subsystems. The MAV Guidance, Navigation and Controls(GNC) team and the MAV Flight Software (FSW) team have partnered together to improve the efficiencyof algorithm integration onto the MAV flight processor, and to increase confidence that said integrationis successful and without human error. An interface architecture is proposed for the GNC suite thatallows both the guidance and navigation subsystems to provide code algorithms directly in C++, and thecontrols subsystem to provide MATLAB Simulink auto-coded algorithms. Several continuous integration/deployment (CI/CD) methodologies have been considered for ease of transition of algorithm code fromthe GNC team to the FSW team. The GNC/FSW teams also worked together to develop a cFS-friendlywrapper which abstracts the integration of the GNC algorithm code into an interface-level API that iscompatible with cFS. Several iterations of vehicle GNC code have been produced between the GNC/FSWteam’s partnership, and this strong interface between these two teams have allowed the GNC/FSWteams to greatly increase confidence of efficient and error-free implementation of the GNC code ontoMAV for a successful flight.

GNC↗
NASA NTRS1985

Spectroradiometric calibration of the Thematic Mapper and Multispectral Scanner system

The results of analyses of Thematic Mapper (TM) images acquired on July 8 and October 28, 1984, and of a check of the calibration of the 1.22-m integrating sphere at Santa Barbara Research Center (SBRC) are described. The results obtained from the in-flight calibration attempts disagree with the pre-flight calibrations for bands 2 and 4. Considerable effort was expended in an attempt to explain the disagreement. The difficult point to explain is that the difference between the radiances predicted by the radiative transfer code (the code radiances) and the radiances predicted by the preflight calibration (the pre-flight radiances) fluctuate with spectral band. Because the spectral quantities measured at White Sands show little change with spectral band, these fluctuations are not anticipated. Analyses of other targets at White Sands such as clouds, cloud shadows, and water surfaces tend to support the pre-flight and internal calibrator calibrations. The source of the disagreement has not been identified. It could be due to: (1) a computational error in the data reduction; (2) an incorrect assumption in the input to the radiative transfer code; or (3) incorrect operation of the field equipment.

Slater, P. N.↗
NASA NTRS1995

Method for coding low entrophy data

A method of lossless data compression for efficient coding of an electronic signal of information sources of very low information rate is disclosed. In this method, S represents a non-negative source symbol set, (s(sub 0), s(sub 1), s(sub 2), ..., s(sub N-1)) of N symbols with s(sub i) = i. The difference between binary digital data is mapped into symbol set S. Consecutive symbols in symbol set S are then paired into a new symbol set Gamma which defines a non-negative symbol set containing the symbols (gamma(sub m)) obtained as the extension of the original symbol set S. These pairs are then mapped into a comma code which is defined as a coding scheme in which every codeword is terminated with the same comma pattern, such as a 1. This allows a direct coding and decoding of the n-bit positive integer digital data differences without the use of codebooks.

Yeh, Pen-Shu↗
NASA NTRS1987

Transonic wall interference assessment and corrections for airfoil data from the 0.3-meter TCT adaptive wall test section

The wall interference assessment/correction code presented is nonlinear, involves four walls, and is applicable to transonic airfoil data from wind tunnels with shaped, solid top and bottom walls. Attention is given to its application to data from the NASA 0.3-m Transonic Cryogenic Tunnel Adaptive Test Section, for two sizes of a NACA 0012 airfoil and to simulated data for an inviscid two-dimensional full-potential code. This study indicates that while adaptive wall wind tunnels significantly reduce some aspects of wall-interference effects (by comparison to straight solid and slotted wall wind tunnels), residual wall and other interference effects are present.

Green, Lawrence L.↗
NASA NTRS1992

Heat shield erosion in a dusty Martian atmosphere

The study calculates the effects of dust particle impacts on the erosion of the forebody heat shield for a 26-m diameter aerobraking vehicle entering the Martian atmosphere at 8.6 km/s. An explicit thin-layer Navier-Stokes code is used to compute the dustless flowfield about the vehicle for the actual Martian atmospheric composition. The deceleration and melting of the dust particles within the forebody shock layer was computed for dust spherules having initial diameters from 1 to 19 microns. All the particles began vaporizing shortly after entering the shock layer, but most survived to hit the heat shield surface. The two different heat shield materials considered were Shuttle ceramic tiles with glassy surfaces and a moderate-density ablator. For a vehicle with a ballistic coefficient of 200 kg/sq m, a glassy heat shield surface experienced an average of 7 mm of surface erosion, or 20 times the thickness of the glassy layer on ceramic tiles.

Papadopoulos, Periklis↗
NASA NTRS1999

Helicon Plasma Source Optimization Studies for VASIMR

A helicon plasma source at Oak Ridge National Laboratory is being used to investigate operating scenarios relevant to the VASIMR (VAriable Specific Impulse Magnetoplasma Rocket). These include operation at high magnetic field (> = 0.4 T), high frequency (<= 30 MHz), high power (< = 3 kW), and with light ions (He+, H+). To date, He plasmas have been produced with n(sub e0) = 1.7 x 10(exp 19)/cu m (measured with an axially movable 4mm microwave interferometer), with Pin = I kW at f = 13.56 MHz and absolute value of B(sub 0) = 0.16 T. In the near future, diagnostics including a mass flow meter and a gridded energy analyzer array will be added to investigate fueling efficiency and the source power balance. The latest results, together with modeling results using the EMIR rf code, will be presented.

Goulding, R. H.↗
NASA NTRS1986

PN/S calculations for a fighter W/F at high-lift yaw conditions

The NASA/Ames parabolized Navier/Stokes computer code was used to calculate the turbulent flow over the wing/fuselage for a generic fighter at M = 2.2. 18 deg angle-of-attack, and 0 and 5 deg yaw. Good test/theory agreement was achieved in the zero yaw case. No test data were available for the yaw case.

Wai, J. C.↗
NASA NTRS1990

Aerobraking in a dusty Martian atmosphere

The effects of dust particle impacts on the erosion of the heat shield were estimated for a 26 m diameter aerobraking vehicle entering the Mars atmosphere at 8.6 km/sec. An explicit Navier-Stokes code was used to compute the flow field about the vehicle for the actual Martian atmospheric composition at a speed of 7.5 km/sec. The deceleration and melting of the dust particles within the forebody shock-layer was computed for dust spherules having initial diameters from 3 to 10 microns. Two heat shield materials were considered: Shuttle tiles with glassy surfaces and a low-density ablator known as Avcoat.

Chang, I-Dee↗
NASA NTRS1993

The first ultraviolet spectropolarimetric study of NGC 1068

We present the first ultraviolet spectropolarimetric observations of the Type 2 Seyfert galaxy NGC 1068 obtained by the Wisconsin Ultraviolet Photo Polarimeter Experiment (WUPPE). In this communication we discuss the continuum polarization in the ultraviolet. Shortward of 2500 A the polarization becomes constant at 16 percent at a position angle of 112 deg. This is in general agreement with the 1983 prediction of Miller and Antonucci (1983) and their thick torus model, in which a hidden Type 1 Seyfert nucleus is seen in light scattered by electrons outside the obscured nuclei.

Code, Arthur D.↗
NASA NTRS1993

Three-D CFD Analysis of Hydrostatic Bearings

The hydrostatic bearing promises life and speed characteristics currently unachievable with rolling element bearings alone. In order to achieve the speed and life requirements of the next generation of rocket engines, turbopump manufacturers are proposing hydrostatic bearings to be used in place of, or in series with, rolling element bearings. The design of a hydrostatic bearing is dependent on accurate pressure in the bearing. The stiffness and damping of the hydrostatic bearing is very sensitive to the bearing recess pressure ratio. In the conventional approach, usually ad hoc assumptions were made in determining the bearing pressure of this approach is inherently incorrect. In the present paper, a more elaborate approach to obtain bearing pressure is used. The bearing pressure and complete flow features of the bearing are directly computed by solving the complete 3-D Navier Stokes equation. The code used in the present calculation is a modified version of REACT3D code. Several calculations have been performed for the hydrostatic bearing designed and tested at Texas A&M. Good agreement has been obtained between computed and test results. Detailed flow features in the bearing will also be described and discussed.

Lin, Shyi-Jang↗
NASA NTRS1994

Enhanced Decoding for the Galileo Low-Gain Antenna Mission

Due to a malfunctioning high-gain antenna, the Galileo spacecraft is transmitting all its data through a low-gain antenna, and the data rate will seldom exceed 100 bits per second during its two-year tour of Jupiter's satellites.

decoder Viterbi decoder Reed-Solomon baseline codi↗
NASA NTRS2010

The Deep Space Network Advanced Systems Program

The deep space network (DSN)--with its three complexes in Goldstone, California, Madrid, Spain, and Canberra, Australia--provides the resources to track and communicate with planetary and deep space missions. Each complex consists of an array of capabilities for tracking probes almost anywhere in the solar system. A number of innovative hardware, software and procedural tools are used for day-to-day operations at DSN complexes as well as at the network control at the Jet Propulsion Laboratory (JPL). Systems and technologies employed by the network include large-aperture antennas (34-m and 70-m), cryogenically cooled receivers, high-power transmitters, stable frequency and timing distribution assemblies, modulation and coding schemes, spacecraft transponders, radiometric tracking techniques, etc. The DSN operates at multiple frequencies, including the 2-GHz band, the 7/8-GHz band, and the 32/34-GHz band.

tracking↗
NASA NTRS1986

Evaluation of the infrared test method for the olympus thermal balance tests

The performance of the infrared (IR) rig used for the thermal balance testing of the Olympus S/C thermal model is discussed. Included in this evaluation are the rig effects themselves, the IRFLUX computer code used to predict the radiation inputs, the Monitored Background Radiometers (MBR's) developed to measure the absorbed radiation flux intensity, the Uniform Temperature Reference (UTR) based temperature measurement system and the data acquisition system. A preliminary set of verification tests were performed on a 1 m x 1 m zone to assess the performance of the IR lamps, calrods, MBR's and aluminized baffles. The results were used, in part, to obtain some empirical data required for the IRFLUX code. This data included lamp and calrod characteristics, the absorptance function for various surface types, and the baffle reflectivities.

Donato, M.↗
NASA NTRS1994

Turbomachinery Laboratory Texas A and M University research progress on annular gas seals

Three helically-grooved seals were tested and the results were compared to the MTI code SPIRALG. A smooth annular seal was tested at six eccentricity ratios from 0 to 0.5. The following are concluded in this viewgraph presentation: (1) Helical-grooved seals provide a substantial reduction in cross-coupled stiffness coefficients. Negative k(sub xy) values are obtained for no-swirl or low-swirl cases. (2) SPIRALG is completely unsuitable for the type of seal tested, namely, turbulent flow, wide grooves and lands, etc. (3) A good analysis code is needed to guide the design of helically-grooved annular seals including groove and smooth sections.

Childs, Dara W.↗
NASA NTRS2000

Summary of Transition Results From the F-16XL-2 Supersonic Laminar Flow Control Experiment

A variable-porosity suction glove has been flown on the F-16XL-2 aircraft to demonstrate the feasibility of this technology for the proposed High-Speed Civil Transport. Boundary-layer transition data on the titanium glove primarily have been obtained at speeds of Mach 2.0 and altitudes of 15,240-16,764 m (50,000-55,000 ft). The objectives of this flight experiment have been to achieve 0.50-0.60 chord laminar flow on a highly swept wing at supersonic speeds and to provide data to validate codes and suction design. The most successful laminar flow results have not been obtained at the glove design point, a speed of Mach 1.9 at an altitude of 15,240 m (50,000 ft); but rather at a speed of Mach 2.0 and an altitude of 16,154 m (53,000 ft). Laminar flow has been obtained to more than 0.46 wing chord at a Reynolds number of 22.7 x 10(exp 6). A turbulence diverter has been used to initially obtain a laminar boundary layer at the attachment line. A lower-surface shock fence was required to block an inlet shock from the wing leading edge. This paper discusses research variables that directly impact the ability to obtain laminar flow and techniques to correct for these variables.

Marshall, Laurie A.↗