Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Experimental study of a free turbulent shear flow at Mach 19 with electron-beam and conventional probes

An experimental study of the initial development region of a hypersonic turbulent free mixing layer was made. Data were obtained at three stations downstream of a M = 19 nozzle over a Reynolds range of 1.3 million to 3.3 million per meter and at a total temperature of about 1670 K. In general, good agreement was obtained between electron-beam and conventional probe measurements of local mean flow parameters. Measurements of fluctuating density indicated that peak root-mean-square (rms) levels are higher in the turbulent free mixing layer than in boundary layers for Mach numbers less than 9. The intensity of rms density fluctuations in the free stream is similar in magnitude to pressure fluctuations in high Mach number flows. Spectrum analyses of the measured fluctuating density through the shear layer indicate significant fluctuation energy at the lower frequencies (0.2 to 5 kHZ) which correspond to large-scale disturbances in the high-velocity region of the shear layer.

Harvey, W. P.↗
NASA NTRS1974

Simulation of real-gas effects for Mars entry

The changes in aerodynamic characteristics due to real-gas effects associated with high speed flight (characterized by large shock density ratios) are primarily the result of changes in surface pressures acting on the forebody. The surface pressures are affected by a change in shock density ratio (real-gas effects) in two ways. First, the level of pressure at the stagnation point relative to freestream dynamic pressure is changed, and second, the distribution of surface pressure relative to stagnation-point pressure is changed. The density-ratio effect on the stagnation point pressure level can be estimated by considering the flow of a perfect gas about a blunt body.

Hunt, J. L.↗
NASA NTRS1980

The effects of titanium impurities in N/+//P silicon solar cells

Microscopic and electrical measurements were performed to explain the degradation mechanisms associated with the presence of titanium impurities in silicon. The measurements included X-ray topography, transmission electron microscopy, and deep level transient spectroscopy, before and after processing. The results indicated the presence of TiO2 precipitates, the density of which increased after phosphorus diffusion. A majority carrier trapping level was observed in the wafers before processing. It was concluded that 10% of the Ti in the N(+)/P silicon solar cells formed electrically active centers which caused degradation of the cell junction. 14% of the remaining Ti precipitated out as TiO2, forming electrically active defects, which also caused junction degradation.

Salama, A. M.↗
NASA NTRSDate not supplied

The Impact of Pixel Size on the Characterization of Deep Convective Clouds for Calibration

The NASA CERES project provides the scientific community the observed TOA SW and LW fluxes for climate monitoring and climate model validation. CERES utilizes hourly geostationary imager derived broadband fluxes, which rely on the channel radiances and associated cloud retrievals, are used to estimate the broadband fluxes between CERES observations. This requires stable and consistent cross-platform imager visible channel calibration. The CERES project utilizes deep convective clouds (DCC) as an invariant Earth target to both monitor the stability of sensors and for radiometric scaling. GSICS, an international collaboration, is also evaluating and implementing the DCC invariant target calibration methodology to provide consistent calibration coefficients across geostationary imagers anchored to the AquaMODIS or the NOAA-20 VIIRS calibration reference. Tropical DCC are the brightest, coldest, most Lambertian, top of the atmosphere Earth targets. The DCC invariant target calibration methodology relies on a large ensemble of tropical D CC-identified pixel-level reflectances, which are aggregated as probability density functions (PDF). By assuming the monthly PDF shape is otherwise consistent in time excepting shifts in reflectance caused by changes in the sensor calibration, the imager stability is monitored. Radiometric scaling is accomplished by ratioing the sensor pair DCC PDF reflectance values. The success of the DCC methodology relies on consistent PDF distributions. The goal of this study is to determine the impact of pixel resolution on the DCC reflectance distribution. Single SNPP-VIIRS 750-m and Landsat 8 OLI 30-m granules are aggregated to degrade the pixel resolution from the native level. The DCC pixels are identified using a BT threshold. Most of the brightest DCC pixels are also the coldest, although there are exceptions. It was found that increasing the BT threshold exponentially increased the number of darker pixels. The pixel resolution did not seem to impact the DCC reflectance PDF distribution for pixel resolutions less than 3 km, which suggests that imagers of varying pixel resolutions may be radiometrically scaled to each other using DCC targets.

DCC↗
NASA NTRS2001

Radar Sounding of Mars: A Focus on MARSIS

Radar has the unique capability of looking under the dry and cold surfaces of Mars. The depth of penetration of radio waves depends on a number of surface and subsurface parameters such as surface topography, subsurface geological structure, and surface and subsurface electromagnetic properties. Among these parameters, the surface topography is known best largely due to valuable data provided by Mars Global Surveyor's MOLA (Mars Orbiter Laser Altimeter) instrument. However, little information is available on the electromagnetic properties and subsurface characteristics of Mars. In addition to dispersion, the ionosphere will also attenuate the radio wave. The level of attenuation depends on the ionosphere's electron density and its profile shape and the electron-neutral collision frequency. Fortunately, information from past missions can provide some information on the expected level of attenuation. A figure shows expected total radio wave attenuation under three different ionospheric conditions. Additional information is contained in the original extended abstract.

Safaeinili, A.↗
NASA NTRS1982

An evaluation of Seasat SAR imagery for urban analysis

Digitally processed Seasat SAR imagery of the Denver, Colorado, area is analyzed with regard to the types of urban data that can be detected and/or inferred from satellite-borne L-band systems. Black-and-white images of the scene were generated at three scales to determine the advantages and detail discernible at each level of display. The large-scale imagery was density-sliced to evaluate the feasibility of producing a semiautomated land-cover classification from the SAR data. Gray level classes were assigned colors to aid interpretation and subsequently compared with the black-and-white images to assess the contribution of each technique and benefits of combining the data from both procedures.

Henderson, F. M.↗
NASA NTRS2009

Estimation of Separation Buffers for Wind-Prediction Error in an Airborne Separation Assistance System

Wind prediction errors are known to affect the performance of automated air traffic management tools that rely on aircraft trajectory predictions. In particular, automated separation assurance tools, planned as part of the NextGen concept of operations, must be designed to account and compensate for the impact of wind prediction errors and other system uncertainties. In this paper we describe a high fidelity batch simulation study designed to estimate the separation distance required to compensate for the effects of wind-prediction errors throughout increasing traffic density on an airborne separation assistance system. These experimental runs are part of the Safety Performance of Airborne Separation experiment suite that examines the safety implications of prediction errors and system uncertainties on airborne separation assurance systems. In this experiment, wind-prediction errors were varied between zero and forty knots while traffic density was increased several times current traffic levels. In order to accurately measure the full unmitigated impact of wind-prediction errors, no uncertainty buffers were added to the separation minima. The goal of the study was to measure the impact of wind-prediction errors in order to estimate the additional separation buffers necessary to preserve separation and to provide a baseline for future analyses. Buffer estimations from this study will be used and verified in upcoming safety evaluation experiments under similar simulation conditions. Results suggest that the strategic airborne separation functions exercised in this experiment can sustain wind prediction errors up to 40kts at current day air traffic density with no additional separation distance buffer and at eight times the current day with no more than a 60% increase in separation distance buffer.

Consiglio, Maria C.↗
NASA NTRS1990

Atmospheric drag perturbations on the Mars Observer Orbiter

The nominal launch date of the Mars Observer spacecraft is 09 - 16 - 02, with Mars encounter on 08 - 19 - 93 and the mapping orbit established on 12 - 06 - 93. Because this orbit is nearly circular at low altitude (361 km), both gravity and atmospheric drag will dominate the orbital evolution and are also the major error sources. This paper provides: (1) a summary of atmospheric density and errors for the Mars Observer orbit and time frame, (2) an assessment of spacecraft-position errors using current density estimates, and (3) an estimate of atmospheric density modeling improvement directly from the Doppler data acquired during flight operations. With an improved gravity field model, reconstructed spacecraft-position errors are at the level of 0.5 km (1sigma). However, when predicting the spacecraft's position over 14 days, the density error (at the 90-percent confidence level) dominates, yielding a down-track error of almost 70 km. By modeling the mean atmospheric density, this error can be reduced by at least a factor of two.

Esposito, P. B.↗
NASA NTRS1990

Regional distribution of mineral and matrix in the femurs of rats flown on Cosmos 1887 biosatellite

The location and nature of the defect in mineralization known to occur in growing animals after spaceflight are studied. The distribution of bone mineral density in situ is mapped, and these images are correlated with the chemical composition of the diaphyseal bone. Concentrations of mineral and osteocalcin are found to be low in the distal half of the diaphysis and concentrations of collagen to be low with evidence of increased synthesis in the proximal half of the diaphysis of the flight bones. X-ray microtomography indicates a longitudinal gradient of decreasing mineralization toward the distal diaphysis. Analysis of embedded sections by backscattered electrons reveals patterns of mineral distribution in the proximal, central, and distal regions of the diaphysis and also shows a net reduction in mineral levels toward the distal shaft. Increases in mineral density to higher fractions in controls are less in the flight bones at all three levels.

Mechanic, Gerald L.↗
NASA NTRS2002

Application of Accelerometer Data to Mars Odyssey Aerobraking and Atmospheric Modeling

Aerobraking was an enabling technology for the Mars Odyssey mission even though it involved risk due primarily to the variability of the Mars upper atmosphere. Consequently, numerous analyses based on various data types were performed during operations to reduce these risk and among these data were measurements from spacecraft accelerometers. This paper reports on the use of accelerometer data for determining atmospheric density during Odyssey aerobraking operations. Acceleration was measured along three orthogonal axes, although only data from the component along the axis nominally into the flow was used during operations. For a one second count time, the RMS noise level varied from 0.07 to 0.5 mm/s2 permitting density recovery to between 0.15 and 1.1 kg per cu km or about 2% of the mean density at periapsis during aerobraking. Accelerometer data were analyzed in near real time to provide estimates of density at periapsis, maximum density, density scale height, latitudinal gradient, longitudinal wave variations and location of the polar vortex. Summaries are given of the aerobraking phase of the mission, the accelerometer data analysis methods and operational procedures, some applications to determining thermospheric properties, and some remaining issues on interpretation of the data. Pre-flight estimates of natural variability based on Mars Global Surveyor accelerometer measurements proved reliable in the mid-latitudes, but overestimated the variability inside the polar vortex.

Tolson, R. H.↗
NASA NTRS2002

Subcutaneous administration of insulin-like growth factor (IGF)-II/IGF binding protein-2 complex stimulates bone formation and prevents loss of bone mineral density in a rat model of disuse osteoporosis

Elevated serum levels of insulin-like growth factor binding protein-2 (IGFBP-2) and a precursor form of IGF-II are associated with marked increases in bone formation and skeletal mass in patients with hepatitis C-associated osteosclerosis. In vitro studies indicate that IGF-II in complex with IGFBP-2 has high affinity for bone matrix and is able to stimulate osteoblast proliferation. The purpose of this study was to determine the ability of the IGF-II/IGFBP-2 complex to increase bone mass in vivo. Osteopenia of the femur was induced by unilateral sciatic neurectomy in rats. At the time of surgery, 14-day osmotic minipumps containing vehicle or 2 microg IGF-II+9 microg IGFBP-2/100g body weight/day were implanted subcutaneously in the neck. Bone mineral density (BMD) measurements were taken the day of surgery and 14 days later using a PIXImus small animal densitometer. Neurectomy of the right hindlimb resulted in a 9% decrease in right femur BMD (P<0.05 vs. baseline). This loss in BMD was completely prevented by treatment with IGF-II/IGFBP-2. On the control limb, there was no loss of BMD over the 14 days and IGF-II/IGFBP-2 treatment resulted in a 9% increase in left femur BMD (P<0.05). Bone histomorphometry indicated increases in endocortical and cancellous bone formation rates and in trabecular thickness. These results demonstrate that short-term administration of the IGF-II/IGFBP-2 complex can prevent loss of BMD associated with disuse osteoporosis and stimulate bone formation in adult rats. Furthermore, they provide proof of concept for a novel anabolic approach to increasing bone mass in humans with osteoporosis.

NASA Discipline Regulatory Physiology↗
NASA NTRS1996

The Effects of Dissipation and Coarse Grid Resolution for Multigrid in Flow Problems

The objective of this paper is to investigate the effects of the numerical dissipation and the resolution of the solution on coarser grids for multigrid with the Euler equation approximations. The convergence is accomplished by multi-stage explicit time-stepping to steady state accelerated by FAS multigrid. A theoretical investigation is carried out for linear hyperbolic equations in one and two dimensions. The spectra reveals that for stability and hence robustness of spatial discretizations with a small amount of numerical dissipation the grid transfer operators have to be accurate enough and the smoother of low temporal accuracy. Numerical results give grid independent convergence in one dimension. For two-dimensional problems with a small amount of numerical dissipation, however, only a few grid levels contribute to an increased speed of convergence. This is explained by the small numerical dissipation leading to dispersion. Increasing the mesh density and hence making the problem over resolved increases the number of mesh levels contributing to an increased speed of convergence. If the steady state equations are elliptic, all grid levels contribute to the convergence regardless of the mesh density.

Eliasson, Peter↗
NASA NTRS2016

Ames S-32 O-16 O-18 Line List for High-Resolution Experimental IR Analysis

By comparing to the most recent experimental data and spectra of the SO2 628 ν1/ν3 bands (see Ulenikov et al., JQSRT 168 (2016) 29-39), this study illustrates the reliability and accuracy of the Ames-296K SO2 line list, which is accurate enough to facilitate such high-resolution spectroscopic analysis. The SO2 628 IR line list is computed on a recently improved potential energy surface (PES) refinement, denoted Ames-Pre2, and the published purely ab initio CCSD(T)/aug-cc-pVQZ dipole moment surface. Progress has been made in both energy level convergence and rovibrational quantum number assignments agreeing with laboratory analysis models. The accuracy of the computed 628 energy levels and line list is similar to what has been achieved and reported for SO2 626 and 646, i.e. 0.01-0.03 cm(exp −1) for bands up to 5500 cm(exp −1). During the comparison, we found some discrepancies in addition to overall good agreements. The three-IR-list based feature-by-feature analysis in a 0.25 cm(exp −1) spectral window clearly demonstrates the power of the current Ames line lists with new assignments, correction of some errors, and intensity contributions from varied sources including other isotopologues. We are inclined to attribute part of detected discrepancies to an incomplete experimental analysis and missing intensity in the model. With complete line position, intensity, and rovibrational quantum numbers determined at 296 K, spectroscopic analysis is significantly facilitated especially for a spectral range exhibiting such an unusually high density of lines. The computed 628 rovibrational levels and line list are accurate enough to provide alternatives for the missing bands or suspicious assignments, as well as helpful to identify these isotopologues in various celestial environments. The next step will be to revisit the SO2 828 and 646 spectral analyses.

Sulfur dioxide↗
NASA NTRS1989

On the populating mechanisms of the autoionising states of Al III ions produced in a Penning ionisation discharge

Spectra emitted by Al II and Al III in the 100-1900-A range from a Penning ionization discharge (PID) have been analyzed in order to study the populating mechanisms of the autoionizing levels of the Al III ion. Electron temperature and density estimates and Al III line intensities obtained using a collisional-radiative model are found to differ from those obtained experimentally, implying that the autoionizing levels of the Na I-like ion may be populated, in the PID plasma, by the inner-shell ionization of excited Mg I-like ions. It is suggested that such autoionizing lines could be used to search for populations inversions in the soft X-ray domain.

Finkenthal, M.↗
NASA NTRS2016

Gene Expression and Structural Skeletal Responses to Long-Duration Simulated Microgravity in Rats

Spaceflight has deleterious effects on skeletal structure and function, specifically causingprofound loss in bone mass, density, and strength, as well as changes in expression levels of genes related to oxidative stress [Hyeon et al., Smith et al.]. It is known that bone resorption remains elevated after spaceflight and that bone density and strength fail to recover completely even years following spaceflight [Smith et al., Carpenter et al.]. However, our current understanding of the signaling pathways and molecular mechanisms that control bone loss and that link oxidative stress, bone resorption, and mechanical unloading of skeletal tissue is incomplete. Here, we aim to examine skeletal responses to simulated long-duration spaceflight on bone loss using the ground-based hindlimb unloading (HU) model in adult (9 months old) male rats. We hypothesized that simulated microgravity leads to the temporal regulation of oxidative-defense genes and pro-osteoclastogenic factors, showing progression and eventual plateau during long-term unloading, and that transient changes at early timepoints in these pathways precede skeletal adaptations to long-duration unloading. We will identify oxidativestress and bone resorption-related changes using global gene expression analysis (Affymetrix arrays) for both acute (within 14 days) and long-term timepoints (90 days). We will also use quantitative PCR to examine changes in expression of genes related to oxidative metabolism (e.g. Nrf2, SOD-1), bone turnover (resorption and formation markers, e.g. TRAP, osteocalcin respectively, SOST), and osteoclastogenesis (e.g. RANKL, OPG) at both early and late timepoints. We will then use detailed microarchitectural and structural analysis through microcomputed tomography to relate gene expression changes with structural changes in bone, expecting that plateaus in gene expression correlate with long-term changes in bone microarchitecture.

Rael, Victoria E.↗
NASA NTRS1989

Parallel Optical Random Access Memory (PORAM)

It is shown that the need to minimize component count, power and size, and to maximize packing density require a parallel optical random access memory to be designed in a two-level hierarchy: a modular level and an interconnect level. Three module designs are proposed, in the order of research and development requirements. The first uses state-of-the-art components, including individually addressed laser diode arrays, acousto-optic (AO) deflectors and magneto-optic (MO) storage medium, aimed at moderate size, moderate power, and high packing density. The next design level uses an electron-trapping (ET) medium to reduce optical power requirements. The third design uses a beam-steering grating surface emitter (GSE) array to reduce size further and minimize the number of components.

Alphonse, G. A.↗
NASA NTRS1986

Short-term variability of nitrogen dioxide in the winter stratosphere

Measurements of limb radiance from the Solar Mesosphere Explorer (SME) satellite are used to infer the NO2 density at the 10- and 16-mbar pressure levels from January 1 to March 31 of 1982. A photochemical-dynamical model is developed using the presently accepted chemistry of the NO(x) family. The dynamical model produces isentropic trajectories which simulate the history of air parcels. From the trajectories the photochemical model calculates NO2 densities, which are compared to those observed by SME. Although the model generally reproduces the spatial and temporal variations rather well, some disagreement was noted for conditions of exceptionally low temperatures. Further analysis indicates that the temperature sensitivity of the N2O5 photolysis cross sections may be overestimated at low temperatures.

Zawodny, J. M.↗
NASA NTRS2019

Evaluating a Regional Climate Model Simulation of Greenland Ice Sheet Snow and Firn Density for Improved Surface Mass Balance Estimates

Modeling vertical profiles of snow and firn density near the surface of the Greenland ice sheet (GrIS) is key to estimating GrIS mass balance, and by extension, global sea level change. To understand sources of error in simulated GrIS density, we compare GrIS density profiles from a leading regional climate model with coincident in situ measurements. We identify key contributors to model density and mass balance biases, including underestimated simulated fresh snow density (which leads to underestimation of density in the top 1 m of snow by ~10%). In areas undergoing frequent melting, positive density biases (of 7% in the top 1 m, and 10% between 1 and 10 m) are likely associated with errors in representing meltwater production, retention and refreezing. The results highlight the importance of accurately capturing fresh snow density and meltwater processes in models used to estimate GrIS mass balance change.

P M Alexander↗