Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laser Spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Tm,Ho:YAG laser with tunable range of 2.08-2.12 microns and its applications to spectroscopy

In recent advanced lasers, 2 micron solid-state lasers such as Tm:YAG and Ho:YAG lasers are very attractive for laser radar remote sensing technologies because of eye safety, realizations of all solid-state laser pumped by diode laser and smaller dimension, tunability of lasing wavelength, possibility of coherent detection, etc. Featuring these advantages, 2 micron lasers have been candidated as laser transmitters for use in water vapor Differential Absorption Lidar (DIAL), laser altimeter, Doppler wind sensor, Mie lidar, etc. Characterization of a tunable Cr, Tm, Ho:YAG laser and its applications to spectroscopy concerning absorption and reflectance are reported.

Asai, Kazuhiro↗
DOE OSTI2025

Online monitoring of lanthanide species with combined spectroscopy in flowing aqueous aerosol systems

Combined spectroscopic analysis through absorption and laser-induced breakdown spectroscopy (LIBS) was used to monitor Nd and Pr concentrations in a flowing aqueous system. A unique, online sampling approach was employed that allowed for an approximately closed analysis loop of liquids from a reservoir. Absorption spectroscopy was performed with an optical flow cell, and LIBS was performed on an aerosol stream. Multivariate calibrations based on combined absorption and LIBS signals were built for Nd and Pr and then used to monitor concentrations in mixed solutions in a series of spiking tests. In these tests, the concentrations of Nd and Pr in solution were intermittently changed while spectroscopic signals were monitored in real-time. The combined spectroscopic signals and multivariate models were successful in monitoring changing concentrations of lanthanide species with high accuracy and minimal latency. Root-mean squared error of predictions were 0.015 mol L −1 and 0.019 mol L −1 for Nd and Pr respectively, and these lanthanides were able to be monitored to an accuracy of < 0.2 wt%. This work demonstrates both the capabilities of a sampling system for online analysis of liquids and the capabilities of multimodal spectroscopic characterization for real-time, continuous tracking of species in potentially hazardous liquid systems.

absorbance spectroscopy↗
DOE OSTI2025

Type-I and type-II interfaces in a MoSe 2 /WS 2 van der Waals heterostructure

We report experimental evidence that MoSe 2 and WS 2 allow the formation of type-I and type-II interfaces, according to the thickness of the former. Heterostructure samples are obtained by stacking a monolayer WS 2 flake on top of a MoSe 2 flake that contains regions of thickness from one to four layers. Photoluminescence spectroscopy and transient absorption measurements reveal a type-II interface in the regions of monolayer MoSe 2 in contact with monolayer WS 2 . In other regions of the heterostructure formed by multilayer MoSe 2 and monolayer WS 2 , features of type-I interface are observed, including the absence of charge transfer and dominance of intralayer excitons in MoSe 2 . Furthermore, the coexistence of type-I and type-II interfaces in a single heterostructure offers opportunities to design sophisticated two-dimensional materials with finely controlled photocarrier behaviors.

2D materials↗
NASA NTRS1984

Lasers, their development, and applications at M.I.T. Lincoln Laboratory

A historical account of the work on lasers at MIT Lincoln Laboratory is presented. Highlighted are the efforts that led to the coinvention of the semiconductor laser and the Laboratory's later role in establishing the feasibility of GaInAsP/InP semiconductor lasers for use in fiber telecommunications at 1.3-1.5 micron wavelengths. Descriptions of other important developments include tunable lead-salt semiconductor and solid-state lasers for spectroscopy and LIDAR applications, respectively, as well as ultrastable CO2 lasers for coherent infrared radar.

Rediker, R. H.↗
NASA NTRS2005

Fiber lasers and amplifiers for science and exploration at NASA Goddard Space Flight Center

We discuss present and near-term uses for high-power fiber lasers and amplifiers for NASA- specific applications including planetary topography and atmospheric spectroscopy. Fiber lasers and amplifiers offer numerous advantages for both near-term and future deployment of instruments on exploration and science remote sensing orbiting satellites. Ground-based and airborne systems provide an evolutionary path to space and a means for calibration and verification of space-borne systems. We present experimental progress on both the fiber transmitters and instrument prototypes for ongoing development efforts. These near-infrared instruments are laser sounders and lidars for measuring atmospheric carbon dioxide, oxygen, water vapor and methane and a pseudo-noise (PN) code laser ranging system. The associated fiber transmitters include high-power erbium, ytterbium, neodymium and Raman fiber amplifiers. In addition, we will discuss near-term fiber laser and amplifier requirements and programs for NASA free space optical communications, planetary topography and atmospheric spectroscopy.

Krainak, Michael A.↗
DOE OSTI2024

Evolution and persistence of SiO emission in nanosecond laser ablation plumes

Analyzing laser-produced plasmas in a controlled oxygen-containing environment provides insight into the formation and evolution of molecular species through gas-phase oxidation. This study explores the role of ambient pressure and oxygen availability in forming SiO molecular species in laser ablation plumes. The self-emission emanating during the reactive ablation of Si targets was characterized by optical emission spectroscopy and optical time-of-flight techniques. Our results showed that the SiO species formation was greatly influenced by both the ambient pressure and oxygen availability. The intensity and the persistence of SiO emission bands are lower at higher oxygen concentrations, indicating they are depopulated by the formation of more complex silicon oxides. The oxygen partial pressure effects on plume chemistry showed that SiO formation is favored even with a minimal oxygen concentration in the environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2018

Forming Perchlorates on Mars Through Plasma Chemistry During Dust Events

We report experimental evidences to support a new formation mechanism, multiphase redox plasma chemistry, for perchlorate on Mars observed during the Phoenix mission, whose high concentrations and high ClO4/Cl ratio cannot be fully interpreted by photochemistry. This chemical reaction occurs between Cl-bearing minerals on the Mars surface and free radicals generated by electrostatic discharge (ESD) during Mars dust events (dust storms, dust devils, and grain saltation). We conducted simulated ESD experiments in a Mars chamber with pure CO2, CO2+H2O(g), and Mars Simulate Gas Mixture at Martian atmospheric pressure. We directly observed (1) the instantaneous generation of atmospheric free radicals CO2+, CO+, OI, HIII, HII, OH, ArI, N2, and N2+in normal glow discharge (NGD), detected by in situ plasma emission spectroscopy, and O3by UV and Mid-IR spectroscopy; (2) the fast transformation of NaCl to NaClO3and NaClO4detected by laser Raman spectroscopy, with oxychlorine enrichment at the sample surfaces confirmed by ion chromatography. Through two sets of experimental comparison, we found that the oxidation power of ESD-electron is three orders of magnitude higher than that of UVC-photon. We scaled our experimental results to the modeled ESD in Mars dust events and Mars surface UV radiation level, and concluded that plasma chemistry occurred during Mars dust events can be an additional important formation mechanism for the large amounts of perchlorates observed during various missions to Mars.

Wu, Zhongchen↗
NASA NTRS2018

A Spectrographic Receiver for Laser Spectrometers

Multiband LiDAR systems, which are typically single wavelength in transmission and reception, are becoming more applicable for scientific use. However, traditional LiDAR receivers do not scale well to tens or hundreds of received bands. We introduce the design for a spectrographic receiver using an array detector for laser spectrometers and present two of the many possible applications: fluorescence spectroscopy in the visible range and IR reflectance spectroscopy. Each laser pulse has the capability of exciting a target in various wavelengths, and a spectrographic receiver would be able to interpret this excitation, while a typical LiDAR consisting of single wavelength receiver would not. Using a spectrograph in a system with a pulsed laser in the visible or UV range is capable of the detection of fluorescent signal. These spectra reveal the presence of organics and is an applicable technology for planetary science. A spectrograph coupled with a pulsed laser in the IR range shows capability of detecting the presence of water in various forms also applicable technology for both Earth and planetary science. Both systems utilize a Czerny-Turner spectrograph design with a ZnSe prism for the dispersion of light onto an Avalanche Photo Diode (APD). This paper introduces the concept and design of a spectrographic receiver for laser spectrometers, as well as two possible applications.

Sandford, Macey↗
NASA NTRS1987

Absolute I(asterisk) quantum yields for the ICN A state by diode laser gain-vs-absorption spectroscopy

Absolute I(asterisk) quantum yields have been measured as a function of wavelength for room temperature photodissociation of the ICN A state continuum. The yields are obtained by the technique of time-resolved diode laser gain-vs-absorption spectroscopy. Quantum yields are evaluated at seven wavelengths from 248 to 284 nm. The yield at 266 nm is 66.0 + or - 2 percent and it falls off to 53.4 + or - 2 percent and 44.0 + or - 4 percent at 284 and 248 nm, respectively. The latter values are significantly higher than those obtained by previous workers using infrared fluorescence. Estimates of I(asterisk) quantum yields obtained from analysis of CN photofragment rotational distributions, as discussed by other workers, are in good agreement with the I(asterisk) yields reported here. The results are considered in conjunction with recent theoretical and experimental work on the CN rotational distributions and with previous I(asterisk) quantum yield results.

Hess, Wayne P.↗
NASA NTRS2002

Investigation of N2O Production from 266 and 532 nm Laser Flash Photolysis of O3/N2/O2 Mixtures

Tunable diode laser absorption spectroscopy has been employed to measure the amount of N2O produced from laser flash photolysis of O3/N2/O2 mixtures at 266 and 532 nm. In the 532 nm photolysis experiments very little N2O is observed, thus allowing an upper limit yield of 7 x 10(exp -8) to be established for the process O3 + N2 yield N2O + O2, where O3 is nascent O3 that is newly formed via O(3P(sub J)) + O2 recombination (with vibrational excitation near the dissociation energy of O3). The measured upper limit yield is a factor of approx. 600 smaller than a previous literature value and is approximately a factor of 10 below the threshold for atmospheric importance. In the 266 nm photolysis experiments, significant N2O production is observed and the N2O quantum yield is found to increase linearly with pressure over the range 100 - 900 Torr in air bath gas. The source of N2O in the 266 nm photolysis experiments is believed to be the addition reaction O(1D(sub 2)) + N2 + M yields (k(sub sigma)) N2O + M, although reaction of (very short-lived) electronically excited O3 with N2 cannot be ruled out by the available data. Assuming that all observed N2O comes from the O(1D(sub 2)) + N2 + M reaction, the following expression describes the temperature dependence of k(sub sigma) (in its third-order low-pressure limit) that is consistent with the N2O yield data: k(sub sigma) = (2.8 +/- 0.1) x 10(exp -36)(T/300)(sup -(0-88+0.36)) cm(sup 6) molecule(sup -2)/s, where the uncertainties are 2(sigma) and represent precision only. The accuracy of the reported rate coefficients at the 95% confidence level is estimated to be 30 - 40% depending on the temperature. Model calculations suggest that gas phase processes initiated by ozone absorption of a UV photon represent about 1.4% of the currently estimated global source strength of atmospheric N2O. However, these processes could account for a significant fraction of the oxygen mass-independent enrichment observed in atmospheric N2O, and they appear to be the first suggested photochemical mechanism that is capable of explaining the altitude dependence of the observed mass -independent isotopic signature.

Estupinan, E. G.↗
NASA NTRS2002

Method and apparatus for chemical and topographical microanalysis

A scanning probe microscope is combined with a laser induced breakdown spectrometer to provide spatially resolved chemical analysis of the surface correlated with the surface topography. Topographical analysis is achieved by scanning a sharp probe across the sample at constant distance from the surface. Chemical analysis is achieved by the means of laser induced breakdown spectroscopy by delivering pulsed laser radiation to the sample surface through the same sharp probe, and consequent collection and analysis of emission spectra from plasma generated on the sample by the laser radiation. The method comprises performing microtopographical analysis of the sample with a scanning probe, selecting a scanned topological site on the sample, generating a plasma plume at the selected scanned topological site, and measuring a spectrum of optical emission from the plasma at the selected scanned topological site. The apparatus comprises a scanning probe, a pulsed laser optically coupled to the probe, an optical spectrometer, and a controller coupled to the scanner, laser and spectrometer for controlling the operation of the scanner, laser and spectrometer. The probe and scanner are used for topographical profiling the sample. The probe is also used for laser radiation delivery to the sample for generating a plasma plume from the sample. Optical emission from the plasma plume is collected and delivered to the optical spectrometer so that analysis of emission spectrum by the optical spectrometer allows for identification of chemical composition of the sample at user selected sites.

Kossakovski, Dmitri A.↗
NASA NTRSDate not supplied

Variability in Mt. Sharp Group Bedrock as Seen By ChemCam Passive and Active Spectra

The Curiosity rover landed in Gale crater in August 2012 and has since been travelling up the central sedimentary mound known as Mt. Sharp. The ChemCam instrument on Curiosity was designed primarily for the use of Laser Induced Breakdown Spectroscopy (LIBS), where a laser ablates a small amount of material from the target and the spectrum of the resulting plasma yields elemental abundance data. ChemCam’s three spectrometers range from 240-905 nm and can also take passive spectra (without the use of the laser). The spectral range ChemCam passive spectra observe is sensitive to charge-transfer and crystal field absorptions related to iron-bearing minerals. In the first 2934 sols of Curiosity’s mission, 9,400 passive spectra were taken of bedrock targets in Mt. Sharp’s Murray and Carolyn Shoemaker formations. We examine these spectra using spectral slope/ratio and band depth calculations as well as Principal Component Analysis (PCA). For the first time, paired passive spectra and LIBS elemental abundances are compared on a large scale. Finally, CheMin data are compared to ChemCam passive observations to understand sources of spectral variability.

H T Manelski↗
NASA NTRSDate not supplied

Lunar Payloads to Constrain Exospheric Water through the NASA M-STAR program

Our understanding of water cycles on the Moon has significantly enhanced recent observations by Chang E-5, Lunar Prospector, and Chandrayaan-1 missions indicating the existence of an active water cycle on the Moon. In a new partnership between Delaware State University (DSU) and NASA Goddard Space Flight Center, enabled through the NASA’s M-STAR (MUREP Space Technology Artemis Research) program, we are developing low mass and power lunar rover payloads to enable long-duration human exploration missions. Payload technologies include wavelength modulation absorption spectroscopy to simultaneously detect water (H16OH) and isotopes (H16OD) in the (6700 nm) mid-infrared region using a closed path in compact Herriot cell optical design and wavelength modulation spectroscopy, and (2) Laser-induced breakdown spectroscopy (LIBS) to simultaneously detect and correlate water isotopes with characteristics elemental composition of lunar regolith. Due to the airless atmosphere of the Moon, we will utilize Artificial intelligence (AI) and Machine learning (ML) approaches to discriminate spectral interference with instrument drifts and correlate mid-IR trace gas profile with LIBS spectral information. This partnership will initiate a STEM engagement space program, e.g., Lander and CubeSat payload technology development for students and the next-generation NASA workforce for future lunar and Mars missions. DSU, a Historically Black University, prides itself in its proven excellence in teaching and research. It enrolls a diverse population of students (~5000) traditionally underrepresented in STEM disciplines. DSU has established itself at the forefront of optics and photonics research that transcends multidisciplinary fields of earth sciences, environmental, defense, and biomedical sensing applications.

water cycles↗
NASA NTRS1981

Laboratory Research

To properly interpret the rapidly growing body of data from comet observations, many types of laboratory measurements are needed. These include: (1) molecular spectroscopy in the visible, ultraviolet, infrared and microwave region of the spectra; (2) laser fluorescent spectroscopy of photofragments; (3) laboratory cross-section or reaction rate measurements using flow tube techniques, fluorescent spectroscopy detection for neutrals and ion-molecule reaction techniques; (4) experiments to simulate solar-wind interactions with comets; (5) studies of the properties and behavior of ice mixtures; (6) experiments on the sublimation rate of ice, and the phase transition from amorphous to crystalline ice; (7) investigations of the irradiation of ice; and (8) the electron impact dissociation and excitation of molecules of cometary interest. A nearly completed experiment on the proton irradiation of ice is described.

Donn, B.↗
NASA NTRS2010

Fiber-Based Laser Transmitter for Oxygen A-Band Spectroscopy and Remote Sensing

A fiber-based laser transmitter has been designed for active remote-sensing spectroscopy. The transmitter uses a master-oscillator-power-amplifier (MOPA) configuration with a distributed feedback diode-laser master oscillator and an erbium-doped fiber amplifier. The output from the MOPA is frequency-doubled with a periodically poled nonlinear crystal. The utility of this single-frequency, wavelength-tunable, power-scalable laser has been demonstrated in a spectroscopic measurement of the diatomic oxygen A-band.

Stephen, Mark A.↗
DOE OSTI2026

Photodissociation and Infrared Spectroscopy of U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n Cation-Molecular Complexes

Laser vaporization of uranium in a pulsed supersonic expansion of carbon dioxide is used to produce complexes of the form U + (CO 2 ) n , UO + (CO 2 ) n , and UO 2+ (CO 2 ) n . These ions are selected in a reflectron time-offlight mass spectrometer and studied with visible laser photodissociation and tunable infrared laser photodissociation spectroscopy in the region of the CO 2 antisymmetric stretch. The dissociation patterns and spectroscopy of these ions indicate that CO 2 ligands are intact molecules. Although reaction products that form oxide-carbonyl or oxalate species are predicted to be stable, there is no direct evidence in the frequency range studied for the formation of these species. There is no clear indication for the coordination numbers for singly charged uranium and its oxide complexes with CO 2 . However, there is strong support in the vibrational patterns for an eight-coordinate complex of the doubly charged UO 2+ species, i.e., UO 2+ (CO 2 ) 8 .

Cluster chemistry↗
DOE OSTI2025

Cation-π Bonding in Actinides: UO x + (Benzene) ( x = 0, 1, 2) Complexes Studied with Threshold Photodissociation Spectroscopy and Theory

Cation-π complexes of the form UO x + (benzene) (x = 0, 1, 2) are produced by laser vaporization and cooled in a supersonic molecular beam. These ions are mass selected and studied with UV–visible laser photodissociation spectroscopy. Each of these complexes photodissociates by elimination of the benzene ligand. Above an energetic threshold, the absorption and photodissociation are continuous, indicating a high density of strongly coupled electronic states. The thresholds for the dissociation of each of these three complexes are measured and assigned as their respective bond dissociation energies. The bond energies determined [U + –(benzene): 42.5 ± 0.3 kcal/mol; UO + –(benzene): 41.0 ± 0.3 kcal/mol; UO 2 + –(benzene): 39.7 ± 0.3 kcal/mol] are comparable to those of transition metal ion-benzene complexes. Computational studies at the DFT/B3LYP level complement the experiments, predicting dissociation energies in reasonably good agreement with the experiments. Experiments and theory agree that the U+(benzene) complex is more strongly bound than its corresponding oxide ions. This new thermochemistry on actinide cation-π bonding should stimulate higher-level computational studies on these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗