Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Method for scavenging mercury

Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

Chang, Shih-ger↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics: Preprint

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure pAr, was varied in the range of 6 - 20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions of the Mo films were strongly dependent on pAr, indicating a consistent and significant decrease in theMo film density pMo with increasing pAr. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. Dielectric functions of Mo were then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(InxGa1-x)Se2 (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for processmonitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using dielectric functions deduced from SE.

14 SOLAR ENERGY↗

A Multi-spectroscopic Investigation of Sulphur Speciation in Silicate Glasses and Slags

Sulphur K-edge x-ray absorption near-edge structure (XANES), sulphur K{sub {alpha}} and K{sub {beta}} high resolution x-ray emission spectroscopies (XES), electron paramagnetic resonance (EPR) and optical absorption spectroscopies have been used to study the speciation of sulphur in a range of soda-lime-silica glasses and silicate slags. Several inorganic standards with known sulphur oxidation states and structural environments have also been analysed. Results confirm that the average oxidation state of sulphur in glasses decreases, as expected, in the order (colourless>light olive>dark olive>light amber>dark amber). This behaviour is consistent with decreasing S{sup 6+}/{Sigma}S ratio, which has been quantified by linear combination fitting of XES S K{alpha} spectra, and with analysed sulphur contents which exhibit a characteristic relationship with oxygen partial pressure, pO{sub 2}. A combination of S{sup 6+}, S{sup 5+}, S{sup 4+} and more reduced sulphur species has been detected in olive and amber glasses. The S{sup 4+} and S{sup 5+} species are most evident in olive-coloured glasses produced under moderately reducing conditions that coincide with minimum sulphur solubilities. The reduced form of sulphur, present in all reduced glasses, is interpreted as being present as S{sup 2-} on the basis of XANES, XES, EPR and optical measurements. An alternative interpretation of the data is that there is a continuum of less strongly reduced species, primarily S{sup +} and S{sup 2+}; this interpretation has less merit. In this paper we show that the established relationship that describes sulphur redox only in terms of S{sup 6+} and S{sup 2-}, and which states that only these two species co-exist over a narrow, moderately reducing range of pO{sub 2}, does not fully describe the behaviour of S in the industrial, non-equilibrated glasses studied. Hence this relationship requires slight modification for non-equilibrated systems to explain the existence of intermediate sulphur oxidation states such as S{sup 4+} and S{sup 5+}, particularly within the intermediate pO{sub 2} range that corresponds with sulphur solubility minima.

36 MATERIALS SCIENCE↗

Method for scavenging mercury

Disclosed herein is a method for removing mercury from a gas stream comprising contacting the gas stream with a getter composition comprising bromine, bromochloride, sulphur bromide, sulphur dichloride or sulphur monochloride and mixtures thereof. In one preferred embodiment the getter composition is adsorbed onto a sorbent. The sorbent may be selected from the group consisting of flyash, limestone, lime, calcium sulphate, calcium sulfite, activated carbon, charcoal, silicate, alumina and mixtures thereof. Preferred is flyash, activated carbon and silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Promoting Improved Ballistic Resistance of Transparent Armor

Transparent armor is a material or system of materials designed to be optically transparent, yet protect from fragmentation or ballistic impacts. Although engineered to defeat specific threats, or a range of threats, there are general requirements common to all of these designs. The primary requirement for a transparent armor system is to not only defeat the designated threat but also provide a multi-hit capability with minimized distortion of surrounding areas. Ground platforms have several parameters that must be optimized, such as weight, space efficiency, and cost versus performance. Glass exhibits tensile failure stress that is very much dependent on the amount of material being stressed, the side being tensile-stressed (i.e., air-versus tin-side if a float glass), and where it is being tensile stressed (i.e., in the middle or near an edge). An axiom arising from those effects is a greater amount of allowable deflection (i.e., higher failure stress) of a ballistically impacted transparent armor will result in improved ballistic resistance. Therefore, the interpretation and management of those tensile-failure-stress dependencies shall ultimately improve ballistic resistance and its predictability of transparent armor. Each of those three dependencies (size, side, and location) in a soda-lime silicate glass is described.

36 MATERIALS SCIENCE↗

Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped C3A in the presence of sulfates

This study details the differences in real-time hydration between pure tricalcium aluminate (cubic C{sub 3}A or 3CaO {center_dot} Al{sub 2}O{sub 3}) and Na-doped tricalcium aluminate (orthorhombic C{sub 3}A or Na{sub 2}Ca{sub 8}Al{sub 6}O{sub 18}), in aqueous solutions containing sulfate ions. Pure phases were synthesized in the laboratory to develop an independent benchmark for the reactions, meaning that their reactions during hydration in a simulated early age cement pore solution (saturated with respect to gypsum and lime) were able to be isolated. Because the rate of this reaction is extremely rapid, most microscopy methods are not adequate to study the early phases of the reactions in the early stages. Here, a high-resolution full-field soft X-ray imaging technique operating in the X-ray water window, combined with solution analysis by {sup 27}Al nuclear magnetic resonance (NMR) spectroscopy, was used to capture information regarding the mechanism of C{sub 3}A hydration during the early stages. There are differences in the hydration mechanism between the two types of C{sub 3}A, which are also dependent on the concentration of sulfate ions in the solution. The reactions with cubic C{sub 3}A (pure) seem to be more influenced by higher concentrations of sulfate ions, forming smaller ettringite needles at a slower pace than the orthorhombic C{sub 3}A (Na-doped) sample. The rate of release of aluminate species into the solution phase is also accelerated by Na doping.

36 MATERIALS SCIENCE↗

Development and application of the EPIC model for carbon cycle, greenhouse-gas mitigation, and biofuel studies

This chapter provides a comprehensive review of the EPIC model in relation to carbon cycle, greenhouse-gas mitigation, and biofuel applications. From its original capabilities and purpose (i.e., quantify the impacts or erosion on soil productivity), the EPIC model has evolved into a comprehensive terrestrial ecosystem model for simulating with more or less process-level detail many ecosystem processes such as weather, hydrology, plant growth and development, carbon cycle (including erosion), nutrient cycling, greenhouse-gas emissions, and the most complete set of manipulations that can be implemented on a parcel of land (e.g. tillage, harvest, fertilization, irrigation, drainage, liming, burning, pesticide application). The chapter also provides details and examples of the latest efforts in model development such as the coupled carbon-nitrogen model, a microbial denitrification model with feedback to the carbon decomposition model, updates on calculation of ecosystem carbon balances, and carbon emissions from fossil fuels. The chapter has included examples of applications of the EPIC model in soil carbon sequestration, net ecosystem carbon balance, and biofuel studies. Finally, the chapter provides the reader with an update on upcoming improvements in EPIC such as the additions of modules for simulating biochar amendments, sorption of soluble C in subsoil horizons, nitrification including the release of N2O, and the formation and consumption of methane in soils. Completion of these model development activities will render an EPIC model with one of the most complete representation of biogeochemical processes and capable of simulating the dynamic feedback of soils to climate and management in terms not only of transient processes (e.g., soil water content, heterotrophic respiration, N2O emissions) but also of fundamental soil properties (e.g. soil depth, soil organic matter, soil bulk density, water limits).

climate change, mitigation, biofuels, biogeochemic↗

New Manufacturing Method for Paper filler and Fiber Material

The study compares commercial available filler products with a new developed “Hybrid Fiber Filler Composite Material” and how main structural, optical and strength properties are affected by increasing the filler content of at least 5% over commercial values. The study consists of: (i) an overview of paper filler materials used in the paper production process, (ii) discusses the manufacturing technology of lime based filler materials for paper applications, (iii) gives an overview of new emerging paper filler technologies, (iv) discusses a filler evaluation of commercial available digital printing paper products, (v) reports from a detailed handsheet study and 12” pilot plant paper machine trial runs with the new Hybrid Fiber Filler Composite Material, and (vi) evaluates and compares commercial filler products and the new Hybrid Fiber Filler Composite Material with a life cycle analyses that explains manufacturing, economic and environmental benefits as they are applied to uncoated digital printing papers.

36 MATERIALS SCIENCE↗

RASDR: Benchtop Demonstration of SDR for Radio Astronomy

The Society of Amateur Radio Astronomers (SARA) members present the benchtop version of RASDR, a Software Defined Radio (SDR) that is optimized for Radio Astronomy. RASDR has the potential to be a common digital receiver interface useful to many SARA members. This document describes the RASDR 0.0 , which provides digitized radio data to a backend computer through a USB 2.0 interface. A primary component of RASDR is the Lime Microsystems Femtocell chip which tunes from a 0.4-4 GHz center frequency with several selectable bandwidths from 0.75 MHz to 14 MHz. A second component is a board with a Complex Programmable Logic Device (CPLD) chip that connects to the Femtocell and provides two USB connections to the backend computer. A third component is an analog balanced mixer up conversion section. Together these three components enable RASDR to tune from 0.015 MHz thru 3.8GHz of the radio frequency (RF) spectrum. We will demonstrate and discuss capabilities of the breadboard system and SARA members will be able to operate the unit hands-on throughout the workshop.

astronomy↗

ENERGY EFFICIENCY CHALLENGES ADDRESSED THROUGH THE USE OF ADVANCED REFRACTORY CERAMIC MATERIALS

Refractory ceramics can play a critical role in improving the energy efficiency of traditional industrial processes through increased furnace efficiency brought about by the employment of novel refractory systems and techniques. Examples of advances in refractory materials related to aluminum, gasification, glass, and lime are highlighted. Energy savings are realized based on reduction of chemical reactions, elimination of mechanical degradation caused by the service environment, reduction of temperature limitations of materials, and elimination of costly installation and repair needs. Key results of projects resulting from US Department of Energy (DOE) funded research programs are discussed with emphasis on applicability of these results to high temperature furnace applications and needed research directions for the future.

Hemrick, James Gordon↗

A Biochar Classification System and Associated Test Methods

In this chapter, a biochar classification system related to its use as soil amendment is proposed. This document builds upon previous work and constrains its scope to materials with properties that satisfy the criteria for biochar as defined by either the International Biochar Initiative (IBI) Biochar Standards or the European Biochar Community (EBC) Standards, and it is intended to minimise the need for testing in addition to those required according to the above-mentioned standards. The classification system envisions enabling stakeholders and commercial entities to (i) identify the most suitable biochar to fulfil the requirements for a particular soil and/or land-use, and (ii) distinguish the application of biochar for specific niches (e.g., soilless agriculture). It is based on the best current knowledge and the intention is to periodically review and update the document based on new data and knowledge that become available in the scientific literature. The main thrust of this classification system is based on the direct or indirect beneficial effects that biochar provides from its application to soil. We have classified the potential beneficial effects of biochar application to soils into five categories with their corresponding classes, where applicable: (i) carbon (C) storage value, (ii) fertiliser value, (iii) liming value, (iv) particle-size, and (v) use in soil-less agriculture. A summary of recommended test methods is provided at the end of the chapter.

Biochar↗

Simulation of integrated pollutant removal (IPR) water-treatment system using ASPEN Plus

Capturing CO2 from fossil fuel combustion provides an opportunity for tapping a significant water source which can be used as service water for a capture-ready power plant and its peripherals. Researchers at the National Energy Technology Laboratory (NETL) have patented a process—Integrated Pollutant Removal (IPR®)—that uses off-the-shelf technology to produce a sequestration ready CO2 stream from an oxy-combustion power plant. Water condensed from oxy-combustion flue gas via the IPR system has been analyzed for composition and an approach for its treatment—for in-process reuse and for release—has been outlined. A computer simulation model in ASPEN Plus has been developed to simulate water treatment of flue gas derived wastewater from IPR systems. At the field installation, water condensed in the IPR process contains fly ash particles, sodium (largely from spray-tower buffering) and sulfur species as well as heavy metals, cations, and anions. An IPR wastewater treatment system was modeled using unit operations such as equalization, coagulation and flocculation, reverse osmosis, lime softening, crystallization, and pH correction. According to the model results, 70% (by mass) of the inlet stream can be treated as pure water, the other 20% yields as saleable products such as gypsum (CaSO4) and salt (NaCl) and the remaining portion is the waste. More than 99% of fly ash particles are removed in the coagulation and flocculation unit and these solids can be used as filler materials in various applications with further treatment. Results discussed relate to a slipstream IPR installation and are verified experimentally in the coagulation/flocculation step.

20 FOSSIL-FUELED POWER PLANTS↗

Physics Integration KErnels (PIKE)

Pike is a software library for coupling and solving multiphysics applications. It provides basic interfaces and utilities for performing code-to-code coupling. It provides simple "black-box" Picard iteration methods for solving the coupled system of equations including Jacobi and Gauss-Seidel solvers. Pike was developed originally to couple neutronics and thermal fluids codes to simulate a light water nuclear reactor for the Consortium for Simulation of Light-water Reactors (CASL) DOE Energy Innovation Hub. The Pike library contains no physics and just provides interfaces and utilities for coupling codes. It will be released open source under a BSD license as part of the Trilinos solver framework (trilinos.org) which is also BSD. This code provides capabilities similar to other open source multiphysics coupling libraries such as LIME, AMP, and MOOSE.

Pawlowski, Roger↗

Effect of Deposition Temperature on the Tribology of MOCVD Zinc Oxide Thin Films Tested under Dry Contact

Zinc oxide has justifiably been attracting attention in several fields, and the relatively new field of tribology is not left out. Aside from its already extensively researched and documented applications in materials science, semiconductor and electronics industry, zinc oxide nanoparticles and thin films appear to be gaining fast grounds as tribological materials, thereby justifying a zealous approach in further exploring their inherent properties in this area. In this work, zinc oxide thin films were deposited by MOCVD (metal-organic chemical vapour deposition) on soda lime glass andAISI304L stainless steel plates at temperatures of 300°C, 330°C, 360°C, 390°C and 420°C respectively, using anhydrous zinc acetate as the precursor. The carrier gas was air with a flow rate of 2.5 dm 3 min -1 at atmospheric pressure, and deposition time of 2 hours each. The thickness and tribological properties of the thin films produced were thereafter investigated. The thickness was measured by RBS (Rutherford backscattering spectroscopy) using a 1.7 MeV Tandem Accelerator, and the friction and wear properties were tested with a HFRR (high frequency reciprocating rig) under dry contact conditions, Olympus BH-2 Optical Microscope, and ADE Phase Shift MicroXam Optical Surface Profiler. The thickness was found to decrease with increasing deposition temperature, although for the 300°C deposition temperature there appeared to be a bloated thickness, which is attributable to such factors as incomplete precursor decomposition, turbulence in precursor flow, and energy straggling during RBS measurement. The friction tests highlighted coefficients of friction which were relatively low at the onset of the tests, but thereafter rapidly increased, owing possibly to temperature rise, attendant rapid oxidation and aided abrasion by worn debris. The average coefficient of friction of each test was computed, and the outcome (0.33 – 0.43) for all of them was a material still good enough for use in reducing friction at nanolevel, even with worn out matter and increased working temperature, with no noticeable trend regarding their varied deposition temperatures. Microscope and profilometer profiles vividly showed wear scars with material removal and material transfer. The average wear scar diameters as well as the wear volumes were compiled for both the test balls and the thin films. The result showed a largely correlated trend in the wear scar diameters and the wear volumes, and the thin film deposited at 330°C was the coating with the least wear scars, material removal cum transfer on the test ball and sample. This result is attributed to the enhanced thickness of the sample over the others, apart from sample X1 earlier reported to have a problem in its thickness. As a result, this temperature is therefore recommended as the optimum deposition temperature for the best tribologically applicable zinc oxide thin films, using zinc acetate precursor by MOCVD.

36 MATERIALS SCIENCE↗

Studies of BONuS12 Radial GEM Detector and TCS Beam Spin Asymmetry in CLAS12

The Barely Offshell Nucleon Structure (BONuS12) experiment adopted the concept of spectator tagging technique to study the nearly-free neutron structure function Fn2 in the CLAS12 of Jefferson Lab. A novel Radial Time Projection Chamber (RTPC) detector was built, tested and integrated into the CLAS12 system to detect a back-moving low momentum tagged proton in d(e,ep)X deep-inelastic scattering. It was a 40 cm long gaseous detector consisting of 3 layers of cylindrical GEM foils for the charge amplification, with the data readout directly from the surrounding padboard. The RTPC detected the recoiling spectator proton, in coincidence with the scattered electron in the CLAS12. Nucleon structure functions are directly related to the partonic functions, quarks momentum distribution in one dimension. A Generalized Parton Distribution (GPD) came to the lime-light as it encodes the information of both longitudinal momentum and transverse position of partons inside the nucleons. Factorization of hard process such as DVCS allows to access GPDs. Timelike Compton Scattering (TCS), ?p ? ??p, is another process that allows to access the GPDs. TCS is studied experimentally in the CLAS12 of Jefferson lab using the quasi-real photoproduction of time-like photon which eventually decays to lepton pair. This dissertation presents the concept of spectator tagging in BONuS12, and the research and development efforts during the BONuS12 preparation leading up to the successful data-taking during spring and summer 2020. In addition, analysis framework to extract the beam spin asymmetry of TCS events through the CLAS12 Run group A data is presented.

Poudel, Jiwan↗

A Review on the State of the Art of Machine Learning and Satellite Imaging: Detecting Scene Changes in Selected Nuclear Fuel Cycle Datasets

The timely detection of clandestine nuclear facilities is one of the greatest challenges faced by the International Atomic Energy Agency’s (IAEA). Idaho National Laboratory is currently applying machine learning (ML) to existing satellite imagery (SI) datasets to find facilities within the nuclear fuel life cycle, with primary focus placed on identifying critical predecessor (i.e., fuel fabrication and fuel enrichment) and successor (i.e., nuclear power plants) facilities. This could provide a satellite image methodology that the IAEA could leverage to discover clandestine facilities. The work presented in this paper describes the evolution of a workflow developed by this team for object detection related to critical infrastructure by expanding that workflow for the purpose of identifying nuclear fuel cycle components and automating dependency assessments. This will be done using two methods housed within a single pipeline. The first method involves implementing a DenseNet161 convolutional neural network to classify the images and explain the results using Local Interpretable Model-Agnostic Explanations (LIME). The second method implements You Only Look Once version 5 (YoloV5), to detect objects within images, provide a probability for the detection, and provide a bounding box that corresponds to the object of interest. The results of this work are anticipated to provide a clear picture of this portion of the nuclear fuel cycle and perform as a stand-alone tool for image assessment that can be expanded to additional fuel cycle components and implemented in international safeguards and national security domains. This capability addresses the IAEA’s need to detect undeclared nuclear materials and activities within a state while encompassing the entire nuclear fuel cycle.

97 MATHEMATICS AND COMPUTING↗

Techno-economic Analysis of CO2 Capture From Pulp/Paper Plants

This poster presentation evaluates the cost of capturing CO2 from a 400,000 air dried tonne (adt)/year pulp production plant, using Shell’s CANSOLV post-combustion capture process. There are five steps in a pulp/paper process: wood preparation, pulping, chemical recovery, bleaching and papermaking. There are three sources of CO2: combustion of waste wood in the wood-preparation step; combustion of black liquor, a product of pulping; and combustion of natural gas coupled with CO2 generated from calcination of limestone in the lime kiln used in chemical recovery. Standalone (pulp only) and integrated (pulp + paper) mills are modeled. The base case results and sensitivity analyses are displayed.

Mantripragada, Hari↗

Mercury control challenge for industrial boiler MACT affected facilities

An industrial coal-fired boiler facility conducted a test program to evaluate the effectiveness of sorbent injection on mercury removal ahead of a fabric filter with an inlet flue gas temperature of 375{sup o}F. The results of the sorbent injection testing are essentially inconclusive relative to providing the facility with enough data upon which to base the design and implementation of permanent sorbent injection system(s). The mercury removal performance of the sorbents was significantly less than expected. The data suggests that 50 percent mercury removal across a baghouse with flue gas temperatures at or above 375{sup o}F and containing moderate levels of SO{sub 3} may be very difficult to achieve with activated carbon sorbent injection alone. The challenge many coal-fired industrial facilities may face is the implementation of additional measures beyond sorbent injection to achieve high levels of mercury removal that will likely be required by the upcoming new Industrial Boiler MACT rule. To counter the negative effects of high flue gas temperature on mercury removal with sorbents, it may be necessary to retrofit additional boiler heat transfer surface or spray cooling of the flue gas upstream of the baghouse. Furthermore, to counter the negative effect of moderate or high SO{sub 3} levels in the flue gas on mercury removal, it may be necessary to also inject sorbents, such as trona or hydrated lime, to reduce the SO{sub 3} concentrations in the flue gas. 2 refs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗