Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Revision of Paschen's Law Relating to the ESD of Aerospace Vehicle Surfaces

The purpose of this work is to develop a form of Paschen's law that takes into account the flow of gas past electrode surfaces. This work was performed under a NASA Science Innovation Fund (SIF) project at the Kennedy Space Center in collaboration with the University of Central Florida. In 2010 the Electrostatics and Surface Physics Laboratory (ESPL) at the Kennedy Space Center performed an electrostatic safety analysis on the flight termination system (FTS) antenna for the Ares I rocket. Paschen's law, derived by Friedrich Paschen in 1889 to relate sparking voltage to gas pressure and electrode separation, does not take into account the effect of flowing gas between the electrodes. The safety of the FTS housing to triboelectric charging was shown only after extensive laboratory testing. Potential benefits are of a form of Paschen's law that considers gas velocity. This work is applicable to current and planned rockets and aerospace vehicles and could lead to possible relaxation of electrostatic launch criteria. Launch aborts can cost up to about a million US dollars depending on the vehicle. [ElectroStatic Discharge (ESD)]

Paschen↗

Rapid Flight Control Law Deployment and Testing Framework for Subscale VTOL Aircraft

A set of procedures was developed to enable rapid flight control law deployment and testing on subscale vertical takeoff and landing (VTOL) aircraft. Low-cost, subscale flight vehicles have become well-suited testbeds for rapid flight dynamics and controls research progression; however, integration of custom flight control laws onto flight hardware has historically been an arduous task. The toolchain described in this report leverages Simulink with the UAV Toolbox, a Pixhawk flight computer running PX4 firmware, and QGroundControl to efficiently design and flight test custom control algorithms. A subscale CL-84 VTOL aircraft was used as a testbed in this investigation to exercise the hardware integration process on a physical model. Implementation of custom attitude stabilization control laws and programmed test input excitations for aircraft system identification were demonstrated using the expeditious hardware integration process. The detailed procedures given in this report are expected to be used in future flight test efforts.

flight testing↗

Design of a Collocation-Based Active Flutter Suppression Control Law for the IAWTM Wind Tunnel Model

The design of an active flutter suppression (AFS) control law for upcoming wind tunnel tests in the Transonic Dynamics Tunnel (TDT) at the NASA Langley Research Center (LaRC) with the Integrated Adaptive Wing Technology Maturation (IAWTM) project is presented. The test article is a highly flexible half-span model of a transport airplane and tests will focus on the transonic regime. The control law is based on the concept of collocation, sometimes called identically located accelerometer and force (ILAF), which uses local velocity feedback to increase damping for all aeroelastic modes. A multiple-input multiple-output (MIMO) extension of this architecture is used for performance and robustness improvements. Results showed that the proposed control law with three fixed gains stabilized the design models over most of the test envelope and successfully extended the open-loop flutter boundary to higher Mach numbers and dynamic pressures.

Active flutter suppression↗

A Review on the Coalescence of Confined Drops with a Focus on Scaling Laws for the Growth of the Liquid Bridge

The surface–tension-driven coalescence of drops has been extensively studied because of the omnipresence of the phenomenon and its significance in various natural and engineering systems. When two drops come into contact, a liquid bridge is formed between them and then grows in its lateral dimensions. As a result, the two drops merge to become a bigger drop. The growth dynamics of the bridge are governed by a balance between the driving force and the viscous and inertial resistances of involved liquids, and it is usually represented by power–law scaling relations on the temporal evolution of the bridge dimension. Such scaling laws have been well-characterized for the coalescence of unconfined or freely suspended drops. However, drops are often confined by solid or liquid surfaces and thus are a different shape from spheres, which affects their coalescence dynamics. As such, the coalescence of confined drops poses more complicated interfacial fluid dynamics challenges compared to that of unconfined drops. Although there have been several studies on the coalescence of confined drops, they have not been systematically reviewed in terms of the properties and geometry of the confining surface. Thus, we aim to review the current literature on the coalescence of confined drops in three categories: drop coalescence on a solid surface, drop coalescence on a deformable surface, and drop coalescence between two parallel surfaces with a small gap (i.e., Hele-Shaw cell), with a focus on power–law scaling relations, and to suggest challenges and outlooks for future research on the phenomena.

Sangjin Ryu↗

Listing triangles in expected linear time on a class of power law graphs.

Enumerating triangles (3-cycles) in graphs is a kernel operation for social network analysis. For example, many community detection methods depend upon finding common neighbors of two related entities. We consider Cohen's simple and elegant solution for listing triangles: give each node a 'bucket.' Place each edge into the bucket of its endpoint of lowest degree, breaking ties consistently. Each node then checks each pair of edges in its bucket, testing for the adjacency that would complete that triangle. Cohen presents an informal argument that his algorithm should run well on real graphs. We formalize this argument by providing an analysis for the expected running time on a class of random graphs, including power law graphs. We consider a rigorously defined method for generating a random simple graph, the erased configuration model (ECM). In the ECM each node draws a degree independently from a marginal degree distribution, endpoints pair randomly, and we erase self loops and multiedges. If the marginal degree distribution has a finite second moment, it follows immediately that Cohen's algorithm runs in expected linear time. Furthermore, it can still run in expected linear time even when the degree distribution has such a heavy tail that the second moment is not finite. We prove that Cohen's algorithm runs in expected linear time when the marginal degree distribution has finite 4/3 moment and no vertex has degree larger than {radical}n. In fact we give the precise asymptotic value of the expected number of edge pairs per bucket. A finite 4/3 moment is required; if it is unbounded, then so is the number of pairs. The marginal degree distribution of a power law graph has bounded 4/3 moment when its exponent {alpha} is more than 7/3. Thus for this class of power law graphs, with degree at most {radical}n, Cohen's algorithm runs in expected linear time. This is precisely the value of {alpha} for which the clustering coefficient tends to zero asymptotically, and it is in the range that is relevant for the degree distribution of the World-Wide Web.

99 GENERAL AND MISCELLANEOUS↗

Come Hell or High-Water: Challenges for Adapting Pacific Northwest Water Law

The Pacific Northwest region of the United States has been recognized as a leader in crafting water laws that work to balance human needs and ecological considerations. However, this region is experiencing changing dynamics that test the strength of existing water policies and laws. Such dynamics include increasing populations, new and exempt uses, quantification of tribal treaty rights, species protection, renegotiation of the Columbia River Treaty, and the impacts of a changing climate. Together, these dynamics are stressing the legal framework, which remains vital to ensuring sustainable water supplies now and into the future. Here, the history behind water resources management in Oregon, Washington, Idaho, and Montana provides the foundation for the laws in place today. Although all four states share regulatory features, nuances specific to each state have tremendously affected their governance structures and ability to adapt to changing dynamics. Although a challenge to meet these changing dynamics, collaborative efforts offer creative opportunities for meeting current and future needs.

99 GENERAL AND MISCELLANEOUS↗

Hanford WTP LAW Melter Startup and Tuning Feed Material Development - 17065

The U.S. Department of Energy's (DOE) Hanford Site in southeast Washington state is home to 56 million gallons of chemical and radioactive waste stored in underground tanks, the result of more than four decades of plutonium production. To address this challenge, the U.S. Department of Energy contracted Bechtel National, Inc., to design and build the world's largest radioactive waste treatment plant. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will use vitrification to immobilize most of Hanford's waste. Vitrification involves blending the waste with glass-forming materials, and heating it to high temperature to form molten glass, then pouring it into stainless steel containers. In this glass form, its radioactivity will decay over hundreds to thousands of years. In advance of full operation of WTP, a sequential process of commissioning will be undertaken to ensure the plant operates safely and within design requirements. The first phase of WTP operations will focus on the Low-Activity Waste (LAW) Vitrification Facility and its supporting facilities and systems. Commissioning of the LAW Facility will employ a progressive approach to address the complexity of system operation and introduction of hazards. This approach starts with introduction of low hazard and simple testing configurations, and incrementally increasing the complexity and hazardous makeup of testing feed materials, culminating in fully integrated treatment of radioactive tank waste during hot commissioning. Testing with simulants that are chemically similar to radioactive tank waste introduces significant chemical hazards into treatment systems in the form of nitrogen oxides (NOx) and anhydrous ammonia. A method of testing to allow tuning and demonstration of equipment and to develop operator proficiency prior to introducing these chemical hazards was deemed necessary. To that end, the development and testing of a new 'tuning feed' material is in progress. The tuning feed is important because its use will enable the first-time integration of all LAW Facility process systems. The tuning feed must include key physical and chemical characteristics that correspond to the commissioning simulant and low activity tank waste, without the inherently hazardous materials or toxic off-gas constituents that result from tank waste treatment. Tuning feed is being developed to provide representative melter feed rheology, glass chemistry, cold cap formation, and off-gas generation rate in order to predict system response to actual tank waste to the extent practical. The tuning feed must also be compatible with process equipment and other process streams that will be encountered during the cold commissioning testing program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

WTP Modifications to Support DFLAW: LAW, BOF, Lab - 16219

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a one-of-a-kind nuclear waste treatment facility being designed and constructed for the U.S. Department of Energy by Bechtel National, Inc. and principal subcontractor URS to process and vitrify radioactive waste stored in underground tanks at the Hanford Site. The Tank Operations Contractor, Washington River Protection Solutions, has responsibility to retrieve, stage, pretreat, and deliver the tank waste feed to WTP. To treat tank waste as soon as practicable, a scenario is being considered to deliver pretreated feed straight to WTP's Low-Activity Waste (LAW) Vitrification Facility. This scenario is called the Direct Feed LAW (DFLAW) program. Balance of Facility utility and system facilities are designed for full WTP operation. Thirteen of these are needed to support reduced throughput during DFLAW operation, of which eight require moderate to extensive changes. Extensive changes include permanent plant modifications that allow DFLAW to operate if the Pretreatment (PT) Facility is unavailable. Under full WTP operation, effluents from the LAW Facility will be returned to the PT Facility for further processing and/or transfer to the Liquid Effluent Retention Facility/Effluent Treatment Facility. The PT Facility also handles all flush water from the tank farm transfers. To address these requirements, a Value Improvement Project was performed. The recommended approach is to provide a 'split stream' Effluent Management Facility (EMF) with an evaporator to support DFLAW. The required modifications for DFLAW facilities are discussed in this paper. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cold Commissioning Simulant Selection for the Hanford Tank Waste Treatment Plant LAW Facility - 18465

Commissioning the Low-Activity Waste (LAW) Facility of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) will require large volumes (∼2,000,000 liters) of a non-radioactive, chemically analogous waste simulant. Cold commissioning will provide for operator training in an integrated facility, demonstration of mechanical process equipment capacity, environmental performance demonstration of emissions control systems, and process control systems shakedown and tuning. Selection of the cold commissioning simulant is following a structured four-phase process to arrive at the preferred composition and recipe. Phases I, II and III are complete. Phase I laid the framework for decision making with preparation of a Project Management Plan, an update to the Simulant Development, Approval, Validation, and Documentation procedure, and a kickoff meeting to gather stakeholder input into the simulant definition and selection criteria. Phase II consisted of a comprehensive literature search and compilation of LAW simulant recipes, followed by initial screening against the selection criteria identified in Phase I. This process identified 72 candidate simulant recipes and down-selected 9 for further study. Phase III studies involved a) statistical comparisons of the similarity of candidate simulant compositions to the tank waste feed vector, b) process modelling of the commissioning sequence with each simulant to estimate glass former and simulant material consumption, offgas and effluent volumes and compositions, and product glass volumes and compositions, and c) evaluation of simulants against the immobilized LAW glass composition algorithm to determine allo able waste loading to ensure compliance with product specifications and process constraints. The results of these studies identified two of the candidate recipes to be carried forward to full-scale testing. Phase IV consists of testing these two recipes at vendor facilities to determine scalability, fabricability, and stability of the simulants when produced at industrial scale. Scalability is the ability to take a recipe from bench scale (1 to 40 liters) batch size to full scale (>35,000 liters) batch size. Fabricability is the ability of a recipe to be prepared in large batches without the need for complex or expensive mechanical equipment, heating, or cooling systems. Stability is the ability of a simulant to withstand long term storage and variations in environmental conditions without unacceptable changes in key characteristics (the set of chemical, physical, and rheological parameters that the simulant is intended to exhibit during cold commissioning tests). Simulants will also be tested for compatibility with other startup material (i.e., frit), tuning simulants, and environmental performance demonstration test spiking solutions to ensure against unexpected situations. Using a structured process is essential when making high impact decisions such as waste simulant selection. Proper planning and a clear explanation of how the decision process will unfold is key to obtaining stakeholder buy-in as more information is gathered. The documentation resulting from this structured selection process will be compiled and summarized in a Cold Commissioning Simulant Definition deliverable due to the Department of Energy 24 months before the start of Cold Commissioning. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ab initio generation of thermal neutron scattering law for uranium dioxide

Neutronic analysis of moderated nuclear fission systems, e.g. nuclear reactors, relies upon an accurate prediction of the thermal neutron spectrum. Thermal neutrons have wavelengths on the order of the interatomic spacing between atoms in matter. Consequently, the scattering cross-sections of these neutrons are affected by the scattering law of the material (i.e. S(α,β), where α and β are dimensionless momentum and energy transfer variables), which describes the atomic structure and thermodynamic motion of the atomic nuclei. Uranium-dioxide (UO{sub 2}) is the primary fuel source for nuclear power reactors moderated by light water. In such systems (e.g. nuclear power reactors, spent fuel pools, etc.) the nuclear fuel comprises a large fraction of the system volume, approximately 1/3 in light-water reactors. Therefore, the scattering law of the fuel material may impact the thermal neutron spectrum and criticality of these systems. In this work previously established ab initio lattice dynamics (AILD) methods were utilized to calculate the phonon density of states (DOS), which acts as a fundamental input to the scattering law. Subsequently, the S(α,β) of UO{sub 2} was generated for publication as an ENDF thermal scattering library (TSL), which will be available for use in standard neutronics computer applications. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Taking into account the temperature effect in nitrate solutions: validation of the Pitzer and 'ISOTEMP' density laws to be implemented in the Latec workbench - 14343

For many years, various methodologies have been investigated by IRSN to calculate nitrate solutions densities. No later than 2002, a new method to calculate nitrate densities supported by theoretical concepts, called' isopiestic' method, was proposed. This method, however, limits the calculation of the bulk density of solutions to 25 deg. C due to the lack of measurements at other temperatures. The objective of the paper is to continue the work initiated in 2002 by accounting for the dilation of the temperature effect, building a 'modified isopiestic law' and also implementing the Pitzer methodology. A comparison with other available density laws such as the Kumar and Sakurai laws is then necessary to validate the implementation. (authors)

42 ENGINEERING↗

A least-squares finite element method based on the Helmholtz decomposition for hyperbolic balance laws

In this paper, a least-squares finite element method for scalar nonlinear hyperbolic balance laws is proposed and studied. The approach is based on a formulation that utilizes an appropriate Helmholtz decomposition of the flux vector and is related to the standard notion of a weak solution. This relationship, together with a corresponding connection to negative-norm least-squares, is described in detail. As a consequence, an important numerical conservation theorem is obtained, similar to the famous Lax–Wendroff theorem. The numerical conservation properties of the method in this paper do not fall precisely in the framework introduced by Lax and Wendroff, but they are similar in spirit as they guarantee that when L 2 convergence holds, the resulting approximations approach a weak solution to the hyperbolic problem. The least-squares functional is continuous and coercive in an H -1 -type norm, but not L 2 -coercive. Nevertheless, the L 2 convergence properties of the method are discussed. Convergence can be obtained either by an explicit regularization of the functional, that provides control of the L 2 norm, or by properly choosing the finite element spaces, providing implicit control of the L 2 norm. Numerical results for the inviscid Burgers equation with discontinuous source terms are shown, demonstrating the L 2 convergence of the obtained approximations to the physically admissible solution. The numerical method utilizes a least-squares functional, minimized on finite element spaces, and a Gauss–Newton technique with nested iteration. Finally, we believe that the linear systems encountered with this formulation are amenable to multigrid techniques and combining the method with adaptive mesh refinement would make this approach an efficient tool for solving balance laws (this is the focus of a future study).

97 MATHEMATICS AND COMPUTING↗

Flow of “stress power-law” fluids between parallel rotating discs with distinct axes

The problem of flow between parallel rotating discs with distinct axes corresponds to the case of flow in an orthogonal rheometer and has been studied extensively for different fluids since the instrument's inception. All the prior studies presume a constitutive prescription of the fluid stress in terms of the kinematical variables. In this paper, we approach the problem from a different perspective, i.e., a constitutive specification of the symmetric part of the velocity gradient in terms of the Cauchy stress. Such an approach ensures that the boundary conditions can be incorporated in a manner quite faithful to real world experiments with the instrument. Interestingly, the choice of the boundary condition is critical to the solvability of the problem for the case of creeping/Stokes flow. Furthermore, when the no-slip condition is enforced at the boundaries, depending on the model parameters and axes offset, the fluid response can show non-uniqueness or unsolvability, features which are absent in a conventional constitutive specification. In case of creeping/Stokes flow with prescribed values of the stress, the fluid response is indeterminate. We also record the response of a particular case of the given “stress power-law” fluid; one that cannot be attained by the conventional power-law fluids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LAW ENFORCEMENT TECHNOLOGY ROADMAP: LESSONS TO DATE FROM THE NORTHWEST TECHNOLOGY DESK AND THE NORTHWEST FADE PILOTS

The goal of this report is to provide insight into the information technology needs of law enforcement based on first hand observations as an embedded and active participant over the course of two plus years. This report is intended as a preliminary roadmap for technology and project investment that will benefit the entire law enforcement community nationwide. Some recommendations are immediate and have more of an engineering flavor, while others are longer term and will require research and development to solve.

99 GENERAL AND MISCELLANEOUS↗

Testing Hopkins’ Bioclimatic Law with PhenoCam data

We investigated the spatial and temporal patterns of vegetation phenology with phenometrics derived from PhenoCam imagery. Specifically, we evaluated the Bioclimatic Law proposed by Hopkins, which relates phenological transitions to latitude, longitude, and elevation. “Green-up” and “green-down” dates—representing the start and end of the annual cycles of vegetation activity—were estimated from measures of canopy greenness calculated from digital repeat photography. We used data from 65 deciduous broadleaf (DB) forest sites, 18 evergreen needleleaf (EN) forest sites, and 21 grassland (GR) sites. DB green-up dates were well correlated with mean annual temperature and varied along spatial gradients consistent with the Bioclimatic Law. Interannual variation in DB phenology was most strongly associated with temperature anomalies during a relatively narrow window of time. EN phenology was not well correlated with either climatic factors or spatial gradients, but similar to DB phenology, interannual variation was most closely associated with temperature anomalies. For GR sites, mean annual precipitation explained most of the spatial variation in the duration of vegetation activity, whereas both temperature and precipitation anomalies explained interannual variation in phenology. PhenoCam data provide an objective and consistent means by which spatial and temporal patterns in vegetation phenology can be investigated.

54 ENVIRONMENTAL SCIENCES↗

A Study on the Wiedemann-Franz Law in a Granular s-Wave Superconductor, Given the Tunneling Between the Grains in Cooper Pair Fluctuation Propagator and Impurity Vertex

The present study tries to investigate Wiedemann-Franz law near and far from the critical temperatures, given the tunneling between the grains in Cooper pair fluctuation propagator and impurity vertex. By means of Dyson’s equation, the Cooper pair fluctuation propagator, L(qkΩ{sub μ}) and the Cooperon (impurity vertex), λ(q, k, ε{sub 1}, ε{sub 2}), are initially calculated in the presence of tunneling between the grains. Then, the three distinct contributions of density of states, Maki-Thompson, and Aslamazov-Larkin, are calculated in the frameworks of the Green’s functions formalism and the Kubo formula technique. The evaluation is conducted under the limited tunneling conductance between the grains. Findings show that although the tunneling is efficient near the critical temperature, it is not effective when it is far from the critical temperature Compared to that in high temperatures, moreover, the deviation from the Wiedemann-Franz law is much more evident in low temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density Large Deviations for Multidimensional Stochastic Hyperbolic Conservation Laws

We investigate the density large deviation function for a multidimensional conservation law in the vanishing viscosity limit, when the probability concentrates on weak solutions of a hyperbolic conservation law. When the mobility and diffusivity matrices are proportional, i.e. an Einstein-like relation is satisfied, the problem has been solved in Bellettini and Mariani (Bull Greek Math Soc 57:31–45, 2010). When this proportionality does not hold, we compute explicitly the large deviation function for a step-like density profile, and we show that the associated optimal current has a non trivial structure. We also derive a lower bound for the large deviation function, valid for a more general weak solution, and leave the general large deviation function upper bound as a conjecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical properties, failure mechanisms, and scaling laws of bicontinuous nanoporous metallic glasses

Molecular dynamics simulations are employed to study the mechanical properties of nanoporous Cu x Zr 1-x metallic glasses (MGs) with five different compositions, x = 0.28, 0.36, 0.50, 0.64, and 0.72, and porosity in the range 0.1 < Φ < 0.7. Results from tensile loading simulations indicate a strong dependence of Young's modulus, E, and Ultimate Tensile Strength (UTS) on porosity and composition. By increasing the porosity from Φ = 0.1 to Φ = 0.7, the topology of the nanoporous MG shifts from closed cell to open-cell bicontinuous. The change in nanoporous topology enables a brittle-to-ductile transition in deformation and failure mechanisms from a single critical shear band to necking and rupture of ligaments. Genetic Programming (GP) is employed to find scaling laws for E and UTS as a function of porosity and composition. Here, a comparison of the GP-derived scaling laws against existing relationships shows that the GP method is able to uncover expressions that can predict accurately both the values of E and UTS in the whole range of porosity and compositions considered.

36 MATERIALS SCIENCE↗