SEARCH · Engineering Papers
Results for “Hunting”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Are You Resilient? Site Energy and Water Resilience Indicators
There is growing interest among operators of individual or co-located facilities to plan for utility disruptions caused by natural hazards and threats. Energy and water resilience at the site level can be characterized as the ability to withstand, adapt, and recover from an energy and/or water supply disruption. But how can a site’s energy and water resilience posture be measured? An evaluation framework with clear performance measures or indicators can help organizations establish what it means to be energy and water resilient and assess progress towards meeting resilience goals across sites and over time. Tracking a consistent set of indicators can help organizations identify problem areas that should be addressed and ascertain if energy and water resilience has improved as a result of investments or operational or policy changes. Resilience indicators also provide a means for organizations with geographically distributed sites to identify common problem areas that may require higher-level attention. This paper outlines an approach that organizations can use to measure site energy and water resilience. This approach was developed by Pacific Northwest National Laboratory for the U.S. Department of Energy’s Federal Energy Management Program as part of an effort to help federal agencies plan for energy and water resilience in a more systematic and rigorous way. The paper defines a general structure for defining energy and water resilience indicators, and provides example indicators and potential rating methods.
Hydrochlorination at 200°C Relevant to the Removal of Cladding from Spent Nuclear Fuel
Explore the source record for details and available documents.
Biodegradable Lubricant from Esterified Propoxylated Glycerol (Final Report)
Explore the source record for details and available documents.
Active Sites and Structural Evolution of NiFeO x Catalysts Supported on Au(111) and HOPG Electrodes in the Electrocatalytic Oxygen Evolution Reaction (OER)
ACS Spring Meeting 2021, Virtual, April 5-16, 2021
DEVELOPMENT AND TESTING OF A SENSOR ROD FOR CHEMICAL AND PHYSICAL MEASUREMENTS IN A TAI
Explore the source record for details and available documents.
Active Sites and Structural Transformation of NiFeOx Catalysts during Electrocatalytic Oxygen Evolution Reaction (OER): Effects of Catalyst Loading and Support
The 67th AVS International Symposium and Exhibition, Virtual, October 24-29, 2021.
Multimodal Stigmatic Imaging Mass Spectrometry with Flat-Top Laser Probe: SBIR Phase I Final Technical Report
Explore the source record for details and available documents.
NNSS Growth and Future Opportunities: NNSS Contributions to Stockpile Stewardship
Presentation to be presented at A Night at the Museum: Our Growth and Future Opportunities at National Atomic Testing Museum, March 17, 2022 (https://nationalatomictestingmuseum.doubleknot.com/event/nnss-a-night-at-the-museum-our-growth-and-future-opportunities/2899889).
Biomass to Biochar: Maximizing the Carbon Value - Executive Summary
Converting biomass to biochar presents exciting opportunities to mitigate climate change, improve forest and soil health, decrease wildfire risk, bolster ecosystem services, and revitalize rural economies. Our expert panel examined how biomass is harvested, converted to biochar and applied and where operational changes and funding could significantly magnify biochar's contributions. To advance knowledge and efficacies, we found that a rigorous combination of coordinated long-term research, market research and development and enhancement of business support infrastructure that leads to collaborative policy development is essential. We also identified how barriers to five specific biochar technology sectors could be overcome and provide guidelines for effective funding.
Sharing the Effectiveness of Turbo FRMAC Implementation of IAEA Radiological Assessment Methodologies for Nuclear and Radiological Emergencies.
Abstract not provided.
Lubricating base oils from esterified alkoxylated polyols using saturated long-chain fatty acids
The present disclosure relates to methods and compositions for making bio-based, biodegradable, and non-bioaccumulating lubricating base oils generated by esterifying alkoxylated polyols (average alkoxylation ≥3) with long-chain (≥C14) saturated and unsaturated fatty acids (FA) or fatty acids modified using industry recognized techniques.
Frangible security device
The present disclosure pertains to a tamper indicating security device, which indicates unauthorized duplication of and/or access to a variety of secure documents, technologies, products, and/or protected volumes.
Evaluation and Comparison of a New Robust Waveform Against Direct Sequence Spread Spectrum for HF
This paper provides a comprehensive performance comparison between a filter bank multicarrier spread-spectrum (FBMC-SS) waveform and a current robust military waveform; namely, MIL-STD-188-110D, Waveform 0, proposed for communications through ionospheric/skywave HF channels. Waveform 0 is effectively a direct sequence spread spectrum waveform that uses the Walsh multi-codes to enhance the information transmission rate. It may thus be referred to as Walsh-DSSS. FBMC-SS, on the other hand, makes use of filter banks to provide excellent performance when the received signal is subject to partial band interference. Successful application of FBMC-SS for communications across skywave HF channels has been previously demonstrated, both theoretically and through experimental work. However, very little has been done to contrast FBMC-SS against Walsh-DSSS. The goal of this paper is to first add new features to FBMC-SS to bring it on par with Walsh- DSSS. These features include: (i), introduction of multi-codes that achieve a comparable (or better) data rate to the Walsh-DSSS; and (ii), addition of a scrambling step applied to the multi-codes to make the receiver detection robust against widely spread multipaths. With this established, in the second part of the paper, we examine the performance of the developed FBMC-SS against Walsh-DSSS when both are applied for communications across skywave HF channels. The two waveforms are compared both through a theoretical study and through experimental works across several skywave channels ranging from hundreds to thousands of kilometers.
The Performance of FBMC-SS in Challenging HF Channel Environments
Provide overview of FBMC-SS waveform Discuss parameters used for simulated results herein Present simulated results in challenging channel environments Cases: 2 path channel with 2nd path frequency offset 2 path MLD and “VP” channels Large narrowband interferer Highly congested interference case Highly dynamic interference case Clarify previously presented results Make conclusions from presented results
Chapter 11: Biochar Production
In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the main product, with heat and electrical energy as co-products of secondary interest. The reasons for this are as follows: when producing biochar, heat is the simplest form of energy to capture and utilize, electrical energy can be generated from heat energy with a wide range of available technologies small and large; rather than immediately combusting the gases released from biomass, there is potential to refine the gases into bio-oil and syngas. However, much larger investments of capital are needed to build facilities for which gaseous fuel production is the primary goal, as compared to those focused on biochar production with heat and electrical energy co-products. While the economic viability of biochar production will be improved by production of high-value co-products (e.g., wood acids for use in pesticides), the simplest production scheme is one in which biochar and heat are the primary products. Here we aim to provide a broader overview of thermochemical processes and technologies most relevant to biochar production in its current state of commercialization. All biochar is a result of pyrolysis (the reaction) but not all biochar is made with a dedicated pyrolysis reactor (the technology type). Further, all biochar is the result of a lack of complete combustion (the reaction), even biochar produced in a combustion or gasification reactor (the technology type). This is an important distinction to acknowledge in the following sections in which we discuss both thermochemical conversion reactions and technology types.