Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High frequency analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Viral community analysis in a marine oxygen minimum zone indicates increased potential for viral manipulation of microbial physiological state

Microbial communities in oxygen minimum zones (OMZs) are known to have significant impacts on global biogeochemical cycles, but viral influence on microbial processes in these regions are much less studied. Here we provide baseline ecological patterns using microscopy and viral metagenomics from the Eastern Tropical North Pacific (ETNP) OMZ region that enhance our understanding of viruses in these climate-critical systems. While extracellular viral abundance decreased below the oxycline, viral diversity and lytic infection frequency remained high within the OMZ, demonstrating that viral influences on microbial communities were still substantial without the detectable presence of oxygen. Viral community composition was strongly related to oxygen concentration, with viral populations in low-oxygen portions of the water column being distinct from their surface layer counterparts. However, this divergence was not accompanied by the expected differences in viral-encoded auxiliary metabolic genes (AMGs) relating to nitrogen and sulfur metabolisms that are known to be performed by microbial communities in these low-oxygen and anoxic regions. Instead, several abundant AMGs were identified in the oxycline and OMZ that may modulate host responses to low-oxygen stress. We hypothesize that this is due to selection for viral-encoded genes that influence host survivability rather than modulating host metabolic reactions within the ETNP OMZ. Together, this study shows that viruses are not only diverse throughout the water column in the ETNP, including the OMZ, but their infection of microorganisms has the potential to alter host physiological state within these biogeochemically important regions of the ocean.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Real-space atomic dynamics in metallic liquids investigated by inelastic neutron scattering

Understanding the dynamics of liquids at the atomic level remains a major challenge. Even though viscosity is one of the most fundamental properties of liquids, its atomistic origin is not fully elucidated. Through inelastic neutron scattering experiment on levitated metallic liquid droplets, the time-dependent pair correlation function, the Van Hove function, was determined for Z⁢r 50 ⁢C⁢u 50 and Z⁢r 80 ⁢P⁢t 20 liquids at various temperatures. The time for change in local atomic connectivity, τ LC , which is the timescale of atomic bond cutting and forming, is estimated based on the exponential decay of the nearest neighbor peak of the Van Hove function. At high temperatures above the crossover temperature T A , τ LC is equal to the Maxwell relaxation time, τ M =η/G ∞ , where η is the macroscopic shear viscosity and G ∞ is the high-frequency shear modulus. Below T A the ratio of τ M /τ LC increases with decreasing temperature, indicating increased atomic cooperativity as predicted by molecular dynamics simulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Enhanced Component Performance Study: Motor-Operated Valves 1998-2024

This report presents an enhanced performance evaluation of motor-operated valves (MOVs) at U.S. commercial nuclear power plants. The data used in this study are based on the operating experience failure reports from calendar year 1998 through 2024 as reported in the Institute of Nuclear Power Operations (INPO) Industry Reporting and Information System (IRIS). The MOV failure modes considered are fail to open or close (FTOC), fail to operate or control (FTOP), and spurious operation (SO). The component reliability estimates and the reliability data are trended for the most recent 10-year period while yearly estimates for reliability are provided for the entire study period. The following increasing trend was identified for MOVs for the most recent 10-year period: • Low-demand MOV frequency of FTOC demands (demands per reactor year). The following decreasing trends were identified for MOVs for the most recent 10-year period: • Low-demand MOV FTOC failure probability • High-demand MOV SO failure rate • Low-demand MOV frequency of FTOC events (failures per reactor year) • High-demand MOV frequency of SO events (failures per reactor year).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Evidence for topological semimetallicity in a chain-compound TaSe 3

Among one-dimensional transition-metal trichalcogenides, TaSe 3 is unconventional in many respects. One is its strong topological semimetallicity as predicted by first-principles calculations. We report the experimental investigations of the electronic properties of one-dimensional-like TaSe 3 single crystals. While the b-axis electrical resistivity shows good metallicity with a high residual resistivity ratio greater than 100, an extremely large magnetoresistance is observed reaching ≈7 × 10 3 % at 1.9 K for 14 T. Interestingly, the magnetoresistance follows the Kohler’s rule with nearly quadratic magnetic field dependence, consistent with the electron–hole compensation scenario as confirmed by our Hall conductivity data. Both the longitudinal and Hall conductivities show Shubnikov-de Haas oscillations with two frequencies: F α ≈ 97 T and F β ≈ 186 T. Quantitative analysis indicates that F α results from the two-dimensional-like electron band with the non-trivial Berry phase [1.1π], and Fβ from the hole band with the trivial Berry phase [0(3D) -0.16π(2D)]. Our experimental findings are consistent with the predictions based on first-principles calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Evaluation of Power Transmission Lines Hardening Scenarios Using a Machine Learning Approach

The power transmission infrastructure is vulnerable to extreme weather events, particularly hurricanes and tropical storms. A recent example is the damage caused by Hurricane Maria (H-Maria) in the archipelago of Puerto Rico in September 2017, where major failures in the transmission infrastructure led to a total blackout. Numerous studies have been conducted to examine strategies to strengthen the transmission system, including burying the power lines underground or increasing the frequency of tree trimming. However, few studies focus on the direct hardening of the transmission towers to accomplish an increase in resiliency. This machine learning-based study fills this need by analyzing three direct hardening scenarios and determining the effectiveness of these changes in the context of H-Maria. A methodology for estimating transmission tower damage is presented here in this study as well as an analysis of impact of replacing structures with a high failure rate with more resilient ones. We found the steel self-support-pole to be the best replacement option for the towers with high failure rate. Furthermore, the third hardening scenario, where all wooden poles were replaced, exhibited a maximum reduction in damaged towers in a single line of 66% while lowering the mean number of damaged towers per line by 10%.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Relativistic Shear Boundary Layer and the Gamma-Ray Emission of GW170817

We present an analysis of the radiation characteristics of kinetic shear boundary layers created by relativistic plasma jets. Using a model of electromagnetic field data based on particle-in-cell simulations of an electron–ion plasma, we solve the motion of individual test electrons and compute their instantaneous radiated power and peak frequency. By analyzing a large number of test electrons in this manner, we find two distinct electron populations present around the shear boundary layer. The most highly radiative electrons execute looping motion due to crossed electric and magnetic fields as they are accelerated along the bulk flow of the jet, and eventually cross the shear boundary interface at steep angles. Electrons that never cross the shear boundary interface radiate much less energy as a group. Summing over all of the highly radiative electrons, we compute the distribution of the total radiated energy as a function of the angle relative to the bulk flow. Furthermore, this result has important potential implications for the observed radiation output of short gamma-ray bursts viewed at large angles from the jet axis, such as the neutron star merger event GW170817/GRB 170817A.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Linear instabilities in the hot-ion regime in a high-field spherical tokamak

Abstract The present operating high-field compact spherical tokamak ST40 is an important step toward an ST-based fusion reactor (Gryaznevich and Asunta 2017 Fusion Eng. Des. 123 177; McNamara 2023 Nucl. Fusion 63 054002). Temperature and density profiles and their uncertainties in recent hot ion ST40 plasmas with central ion temperatures exceeding 8.6 keV, have been inferred using an integrated analysis of several diagnostics including line-of-sight integration and volume average measurements, as well as limited profile information from a charge-exchange-recombination spectrometer. A linear gyrokinetic stability analysis has been carried out to identify the most unstable micro-instabilities in these hot ion plasmas. In one of these plasmas, it is found that linear growth rates of both ion- and electron-scale ( k θ ρ s ⩾ 0.2 where k θ is the poloidal wavenumber and ρ s is the ion gyro-radius with sound speed) modes decrease from the edge toward the core of the plasma (i.e. from ρ = 0.8 to 0.3 where ρ is the square root of the normalized magnetic flux), while the change of linear growth rates at k θ ρ s < 0.2 is non-monotonic. In particular, at ρ = 0.3 no unstable mode was found at k θ ρ s > 5 , and about an order of magnitude reduction in the maximum linear growth rate in the ion-scale wavenumber range of 0.2 ⩽ k θ ρ s < 1 is seen at ρ = 0.3 compared with the ρ = 0.8 location. It is found through parametric scans that while the ion temperature gradient (ITG) mode/trapped electron mode (TEM) and kinetic ballooning mode (KBM)/kinetic shear Alfvén (KSA) mode are more important in the plasma core, ubiquitous mode (UM) is found to be the important ion-scale instability at ρ ⩾ 0.6 . At ρ = 0.8, two instabilities are found at the electron scale, with one being the typical electrostatic electron temperature gradient (ETG) mode at ρ e scale and beyond and the other being an unidentified low-real-frequency instability (at the intermediate scale between electron and ion gyroradii) which can propagate in the ion direction and is driven by ETG. The existence of UM at the ion scale and the low-real-frequency instability and ETG mode at the electron scale at ρ = 0.8 is supported by an extensive linear gyrokinetic stability analysis of another ST40 hot ion plasma in a wider parametric range, taking into account the uncertainties in the experimental profiles.

ubiquitous mode↗
DOE OSTI2021

Adaptive Extremum Seeking Control Based LCL Filter Resonant Frequency Online Estimation

The LCL filter has been widely used in the grid-tied inverter systems. However, the resonance of the LCL filter can reduce the system stability margin and the control performance. Moreover, the grid impedance variations can lead to the drift of the resonant frequency, which can further worsen the system robustness. Thus, it is important to know the actual resonant frequency of the LCL filter. In this letter, an adaptive extremum seeking control (AESC) based estimation scheme is proposed to estimate the resonant frequency of the LCL filter online. Further by injecting a high-frequency (HF) signal into the inverter output voltage, the AESC scheme can identify the extremum of the LCL filter amplitude response, i.e., resonant peak. The amplitude of injection signal is adaptive based on the inverter HF response, which can address the tradeoff between the dynamic response and inverter output current quality. Most importantly, compare to other method, the proposed scheme has very low computational complexity, which minimizes the burden to the normal inverter controller operation. Stability analysis is given in this letter, and experimental studies are conducted to validate the effectiveness of the proposed scheme.

42 ENGINEERING↗
DOE OSTI2025

Design, Prototyping, Fabrication and Test of the Mu2e AC-Dipole Magnet

Fermilab Magnet Systems is building three High-frequency AC-Dipole Magnets for the Mu2e experiment at Fermilab. These magnets are composed of three single-loop one-meter-long ferrite loaded segments. The excitation consists of a copper tube, which is also used as a means for its cooling with the inherited challenges of Voltage and Frequency uncoupling. These magnets are designed to operate either at 300 kHz or 4.4 MHz via resonance tuning. Following the completion of the design, prototyping, and analysis phases, all ferrites and other components were procured, and the magnets were fabricated to meet vacuum compatibility requirements using strict procedures. Each magnet undergoes thorough baking and testing before being installed in the experiment. This paper discusses the magnets' role in proton background suppression as it represents a unique and essential device for the Mu2e experiment at Fermilab. We present the magnet design choices, modeling approach, and the challenges encountered during fabrication. Additionally, we outline the power supply driving mechanism, the testing that was performed, and our results.

Elementi, Luciano [Fermilab] (ORCID:00000002766372↗
DOE OSTI2020

Frequency domain measurements of melt pool recoil force using modal analysis

Recoil pressure is a critical factor affecting the melt pool dynamics during Laser Powder Bed Fusion (LPBF) processes. Recoil pressure depresses the melt pool. When the recoil pressure is low, thermal conduction and capillary forces may be inadequate to provide proper fusion between layers. However, excessive recoil pressure can produce a keyhole inside the melt pool, which is associated with gas porosity. Direct recoil pressure measurements are challenging because it is localized over an area proportionate to the laser spot size producing a force in the mN range. This paper reports a vibrationbased approach to quantify the recoil force exerted on a part in a commercial LPBF machine. The measured recoil force is consistent with estimates from high speed synchrotron imaging of entrained particles, and the results show that the recoil force scales with applied laser power and is inversely related to the laser scan speed. These results facilitate further studies of melt pool dynamics and have the potential to aid process development for new materials.

42 ENGINEERING↗
DOE OSTI2022

Low 13 C- 13 C abundances in abiotic ethane

Distinguishing biotic compounds from abiotic ones is important in resource geology, biogeochemistry, and the search for life in the universe. Stable isotopes have traditionally been used to discriminate the origins of organic materials, with particular focus on hydrocarbons. However, despite extensive efforts, unequivocal distinction of abiotic hydrocarbons remains challenging. Recent development of clumped-isotope analysis provides more robust information because it is independent of the stable isotopic composition of the starting material. Here, we report data from a 13 C- 13 C clumped-isotope analysis of ethane and demonstrate that the abiotically-synthesized ethane shows distinctively low 13 C- 13 C abundances compared to thermogenic ethane. A collision frequency model predicts the observed low 13 C- 13 C abundances (anti-clumping) in ethane produced from methyl radical recombination. In contrast, thermogenic ethane presumably exhibits near stochastic 13 C- 13 C distribution inherited from the biological precursor, which undergoes C-C bond cleavage/recombination during metabolism. Further, we find an exceptionally high 13 C- 13 C signature in ethane remaining after microbial oxidation. In summary, the approach distinguishes between thermogenic, microbially altered, and abiotic hydrocarbons. The 13 C- 13 C signature can provide an important step forward for discrimination of the origin of organic molecules on Earth and in extra-terrestrial environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

TESS cycle 1 observations of roAp stars with 2-min cadence data

ABSTRACT We present the results of a systematic search for new rapidly oscillating Ap (roAp) stars using the 2-min cadence data collected by the Transiting Exoplanet Survey Satellite (TESS) during its Cycle 1 observations. We identify 12 new roAp stars. Amongst these stars we discover the roAp star with the longest pulsation period, another with the shortest rotation period, and six with multiperiodic variability. In addition to these new roAp stars, we present an analysis of 44 known roAp stars observed by TESS during Cycle 1, providing the first high-precision and homogeneous sample of a significant fraction of the known roAp stars. The TESS observations have shown that almost 60 per cent (33) of our sample of stars are multiperiodic, providing excellent cases to test models of roAp pulsations, and from which the most rewarding asteroseismic results can be gleaned. We report four cases of the occurrence of rotationally split frequency multiplets that imply different mode geometries for the same degree modes in the same star. This provides a conundrum in applying the oblique pulsator model to the roAp stars. Finally, we report the discovery of non-linear mode interactions in α Cir (TIC 402546736, HD 128898) around the harmonic of the principal mode – this is only the second case of such a phenomenon.

Holdsworth, D. L.↗
DOE OSTI2025

E3SM‐Arctic: Regionally Refined Coupled Model for Advanced Understanding of Arctic Systems Interactions

Earth system models are essential tools for climate projections, but coarse resolutions limit regional accuracy, especially in the Arctic. Regionally refined meshes (RRMs) enhance resolution in key areas while maintaining computational efficiency. This paper provides an overview of the United States (U.S.) Department of Energy's (DOE's) Energy Exascale Earth System Model version 2.1 with an Arctic RRM, hereafter referred to as E3SMv2.1-Arctic, for the atmosphere (25 km), land (25 km), and ocean/ice (10 km) components. We evaluate the atmospheric component and its interactions with land, ocean, and cryosphere by comparing the RRM (E3SM2.1-Arctic) historical simulations (1950–2014) with the uniform low-resolution (LR) counterpart, reanalysis products, and observational data sets. The RRM generally reduces biases in the LR model, improving simulations of Arctic large-scale mean fields, such as precipitation, atmospheric circulation, clouds, atmospheric river frequency, and sea ice thickness. However, it introduces a seasonally dependent surface air temperature bias, reducing the LR cold bias in summer but enhancing the LR warm bias in winter, which contributes to the underestimated winter sea ice area and volume. Radiative feedback analysis shows similar climate feedback strengths in both model configurations, with the RRM exhibiting a more positive surface albedo feedback and contributing to a stronger surface warming than LR. These findings underscore the importance of high-resolution modeling for advancing our understanding of Arctic climate changes and their broader global impacts, although some persistent biases appear to be independent of model resolution at 10–100 km scales.

Energy Exascale Earth System Model (E3SM)↗
DOE OSTI2024

Microwave Flow Cytometric Detection and Differentiation of Escherichia coli

Label-free measurement and analysis of single bacterial cells are essential for food safety monitoring and microbial disease diagnosis. We report a microwave flow cytometric sensor with a microstrip sensing device with reduced channel height for bacterial cell measurement. Escherichia coli B and Escherichia coli K-12 were measured with the sensor at frequencies between 500 MHz and 8 GHz. The results show microwave properties of E. coli cells are frequency-dependent. A LightGBM model was developed to classify cell types at a high accuracy of 0.96 at 1 GHz. Thus, the sensor provides a promising label-free method to rapidly detect and differentiate bacterial cells. Nevertheless, the method needs to be further developed by comprehensively measuring different types of cells and demonstrating accurate cell classification with improved machine-learning techniques.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

High-frequency and Vertical Variations of Soil Moisture and their Impact on Ecosystem Dynamics

The vertical distribution of subsurface moisture is a major control on ecosystem dynamics and climate. The Mediterranean climate of California, with wet winters and dry summers, provides a testbed for understanding how transpiration is sustained through extended dry periods. The project developed and tested a new subsurface hydrology model that includes a parameterization of stochastic hydraulic conductivity to capture fracture flow, a diagnostic model of rooting profile that depends on the subsurface hydrology, and a representation of hydraulic redistribution by plant roots. A sensitivity study shows that it is plants with rooting depths >8 m that could access the subsurface moisture. The insight is applied to understand differential tree mortality during the 2012-2016 drought in California. The analysis shows that greater mortality trees on plutonic rocks than on sedimentary rocks. The study demonstrates, for the first time, the importance of lithology for the distribution and health of ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

An experimental study of the existence regions and non-linear interactions of drift wave and Kelvin–Helmholtz instabilities in a linear magnetized plasma

Experimental observations of the intrinsic excitation and non-linear interactions of drift wave (DW) and Kelvin–Helmholtz (KH) instabilities in a linear magnetized plasma column are presented. The experiments are carried out in the inverse mirror plasma experimental device (IMPED)—a cylindrical, magnetized, linear plasma machine designed to study low-frequency waves and instabilities in plasma. A novel feature of IMPED is the ability to control plasma profiles, such as the density n(r)⁠, electron temperature T e (r)⁠, and plasma potential V p (r) by varying the ratio Rm of the magnetic field in the main chamber to that in the source chamber. At high values of Rm, higher-density gradient scale length promotes the drift wave (DW) instability while lower Rm value results in a higher radial electric field, inducing a sheared poloidal flow that enhances the dominance of the Kelvin–Helmholtz (KH) mode. The background and fluctuating plasma parameters are characterized using various configurations of multiple in situ electric probes at different spatial locations to quantify the local gradients that excite the low-frequency primary instabilities. Statistical, spectral, and bispectral analysis of the density and potential signals help identify these modes in terms of wave number, frequency, phase, and amplitude and also delineate the nature of their non-linear interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Spatially resolved x-ray detection with photonic crystal scintillators

We study the self-collimation phenomenon in photonic crystals (PhC) of wide bandgap materials for ultra-fast and high spatial resolution x-ray detection. We work on various heavy inorganic scintillators: BaF 2 , GaN, ZnO, CsI:Tl, NaI:Tl, LYSO, WO 4 compounds, and plastic scintillators. Conventional scintillator detectors do not rely on a direct detection mechanism; hence, they require intricate design and fabrication processes. We offer a PhC design to observe self-collimation phenomena and overcome the ongoing spatial resolution challenges with these types of materials. We investigate the photonic band diagrams and iso-frequency contours. Fourier transforms based on finite-difference time-domain and frequency domain simulations are done for verifying and analyzing the self-collimation with the selected material. Light extraction efficiency at the PhC–air interface, depending on the truncation distance from the excitation point, is measured. Beam divergence values are calculated at 1 mm propagation distance. The vertical field profiles are obtained to observe the confinement. For the spatial resolution analysis, cross-sectional beam profiles have been examined. Furthermore, Gaussian envelopes are fitted to beam profiles for a consistent data analysis, and full-width-at-half-maximum values are considered. As a result, we theoretically prove and demonstrate the spatially resolved x-ray detection at the sub-micrometer level for a wide range of scintillator materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quantifying Flood Frequency Associated with Clustered Mesoscale Convective Systems in the United States

Mesoscale convective systems (MCSs) that are clustered in time and space can have a broader impact on flooding because they have larger area coverage than that of individual MCSs. The goal of this study is to understand the flood likelihood associated with MCS clusters. To achieve this, floods in the Storm Events Database in April–August of 2007–17 are matched with clustered MCSs identified from a high-resolution MCS dataset and terrestrial conditions in a land surface dataset over the central-eastern United States. In this work, our analysis indicates that clustered MCSs preferentially occurring in April–June are more effective at producing floods, which also last longer due to the greater rainfall per area and wetter initial soil conditions and, hence, produce greater runoff per area than nonclustered MCSs. Similar increases of flood occurrence with cluster-total rainfall size and wetter soils are also observed for each MCS cluster, especially for the overlapping rainfall areas within each cluster. These areas receive rainfall from multiple MCSs that progressively wet the soils and are therefore associated with higher flood likelihood. This study underscores the importance to understand clustered MCSs to better understand flood risks and their future changes.

54 ENVIRONMENTAL SCIENCES↗