Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Theoretical predictions for hot-carrier generation from surface plasmon decay

Decay of surface plasmons to hot carriers finds a wide variety of applications in energy conversion, photocatalysis and photodetection. However, a detailed theoretical description of plasmonic hot-carrier generation in real materials has remained incomplete. Here we report predictions for the prompt distributions of excited 'hot' electrons and holes generated by plasmon decay, before inelastic relaxation, using a quantized plasmon model with detailed electronic structure. We find that carrier energy distributions are sensitive to the electronic band structure of the metal: gold and copper produce holes hotter than electrons by 1-2 eV, while silver and aluminium distribute energies more equitably between electrons and holes. Momentum-direction distributions for hot carriers are anisotropic, dominated by the plasmon polarization for aluminium and by the crystal orientation for noble metals. We show that in thin metallic films intraband transitions can alter the carrier distributions, producing hotter electrons in gold, but interband transitions remain dominant.

36 MATERIALS SCIENCE↗

Heteroepitaxial vertical perovskite hot-electron transistors down to the monolayer limit

Two-dimensional heterostructures combined with vertical geometries are candidates to probe and utilize the physical properties of atomically-thin materials. The vertical configuration enables a unique form of hot-carrier spectroscopy as well as atomic-scale devices. Here, we present the room-temperature evolution of heteroepitaxial perovskite hot-electron transistors using a SrRuO 3 base down to the monolayer limit ( ~ 4 Å). As a fundamental electronic probe, we observe an abrupt transition in the hot-electron mean free path as a function of base thickness, coinciding with the thickness-dependent resistive transition. As a path towards devices, we demonstrate the integrated synthesis of perovskite one-dimensional electrical edge contacts using water-soluble and growth-compatible Sr 3 Al 2 O 6 hard masks. Edge-contacted monolayer-base transistors exhibit on/off ratios reaching ~ 10 8 , complete electrostatic screening by the base manifesting pure hot-electron injection, and excellent scaling of the output current density with device dimensions. These results open new avenues for incorporating emergent phenomena at oxide interfaces and in heterostructures.

36 MATERIALS SCIENCE↗

The critical role of hot carrier cooling in optically excited structural transitions

The hot carrier cooling occurs in most photoexcitation-induced phase transitions (PIPTs), but its role has often been neglected in many theoretical simulations as well as in proposed mechanisms. Here, by including the previously ignored hot carrier cooling in real-time time-dependent density functional theory (rt-TDDFT) simulations, we investigated the role of hot carrier cooling in PIPTs. Taking IrTe2 as an example, we reveal that the cooling of hot electrons from the higher energy levels of spatially extended states to the lower energy levels of the localized Ir–Ir dimer antibonding states strengthens remarkably the atomic driving forces and enhances atomic kinetic energy. These two factors combine to dissolute the Ir–Ir dimers on a timescale near the limit of atomic motions, thus initiating a deterministic kinetic phase transition. We further demonstrate that the subsequent cooling induces nonradiative recombination of photoexcited electrons and holes, leading to the ultrafast recovery of the Ir–Ir dimers observed experimentally. These findings provide a complete picture of the atomic dynamics in optically excited structural phase transitions.

36 MATERIALS SCIENCE↗

3D Plasma Equilibrium and Stability with Hot Particle Anisotropic Pressure

The anisotropic pressure free-boundary three-dimsnsional (3D) equilibrium code ANI-MEC with nested magnetic flux surfaces has been developed as an extension of the VMEC2000 code. The preconditioning algorithm included is exploited to allow the computation of equilibrium states with radial force balance error improvements exceeding 4 orders of magnitude compared with the non-conditioned results. Large off-axis energetic particle deposition has been applied in a 2-field period quasiaxisymmetric stellarator reactor at <{beta}>{approx_equal}4.5% to test the limitations of the code. The hot particle pressures are roughly uniform around the flux surfaces when p{sub parallel}>p{sub perpendicular}. The fast particle perpendicular pressures localise in the region of deposition for p{sub perpendicular}>p{sub parallel}, while the energetic particle parallel pressures concentrate on the low-field side. Two anisotropic pressure models for global fluid stability implemented in the TERPSICHORE code have been applied to the LHD Heliotron for a sequence of equilibria with fixed <{beta}{sub dia}>{approx_equal}5%(<{beta}{sub th}>{approx_equal}3.5%) varying the fast particle temperature ratio T{sub parallel}/T{sub perpendicular}. Global magnetohydrodynamic modes are quasi-stable according to the model with rigid hot particle layers, while they become stabilised according to the fully interacting energetic particle model with increasing T{sub parallel}/T{sub perpendicular}. As T{sub parallel}/T{sub perpendicular} approaches 3, however, the n = 1 mode family becomes unstable. A transition from a nearly stable quasi-external ballooning-interchange structure to a weakly unstable internal kink mode takes place. The investigation of beam-driven fusion in a Heliotron system is broached. A background plasma with cold ions and warm electrons at <{beta}{sub ith}>{approx_equal}1% is examined with fixed T{sub parallel}/T{sub perpendicular} = 10 in which the hot particle contribution to <{beta}> is increased. An equilibrium limit is reached when the hot parallel component <{beta}{sub parallel}{sup h}> exceeds 6.1%. The rigid model predicts stability, while the fully interacting model shows stabilisation for <{beta}{sub parallel}{sup h} greater than 3%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot electron generation forming a steep interface in superintense laser-matter interaction

Superintense laser light (>10{sup 20} W/cm{sup 2}) is able to sweep the preplasma over short times and compress the preplasma density gradient typically generated by the prepulse of today's high-intensity, high energy laser systems. Hot electron generation at steep plasma density gradients has been studied in a previous paper [A. J. Kemp, Y. Sentoku, and M. Tabak, Phys. Rev. Lett. 101, 075004 (2008)], which identified a mode of hot electron acceleration that is characterized by the formation of low-density shelf in front of the target. In this paper, we deal with laser incidence on slab target in one-dimensional situation and follow the formation of a steep interface and hot electron acceleration up to later stages of the interaction. We find that a novel mode of absorption appears during which the coupling efficiency drops, while a large number of sub-MeV hot electrons is produced at the interface. These dc-ponderomotive electrons play a dominant role in the bulk heating of solid density targets. We propose an analytical model to describe this absorption mode, explain electron energy spectra, and identify the parameter regime where it appears.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collimated hot electron jets generated from subwavelength grating targets irradiated by intense short-pulse laser

Hot electron emission from subwavelength grating targets irradiated by a 60 fs short-pulse laser was investigated at moderate intensities in excess of 10{sup 15} W/cm{sup 2}. Collimated hot electron jets with a divergence angle as small as 5 deg. were observed at the specular reflection direction when the laser beam was incident at the resonance angle for surface plasmon excitation. When the incident angle, which departs from the resonant angle, is increased, the collimated hot electron jet remains near the specular reflection direction, but its intensity attenuates gradually. At the same time, the number of the hot electrons with very large spreading angle emitting along the target normal direction increases with the incident angle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control of the hot electrons produced by laser interaction with nanolayered target

Hot electrons generated by short-pulse-laser interaction with nanolayered target (NT) are investigated using two-dimensional particle-in-cell simulation. Compared to the planar target, the NT leads to more efficient conversion of laser energy to the kinetic energy of the accelerated electrons. However, the energy absorption by the NT decreases at both too-low and too-high laser intensities. At lower laser intensities it is because of the weaker electric and magnetic fields generated by the hot-electron jets and smaller relativistic skin depth. At higher laser intensities it is because of the damage or destruction of the layered structure by the laser field. On the other hand, the dependence of the conversion efficiency and hot-electron number on the duration of the (short) laser pulse and the nanolayer length is weak. Control of the hot-electron characteristics by tailoring the parameters of the laser and the NT is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Impact of Ceramic Shell Strength on Hot Tearing during Investment Casting

The effect of ceramic shell strength on hot tearing susceptibility during solidification was inspected practicing investment casting of the cobalt-base superalloy samples with the same casting conditions, but different ceramic shell systems. Results showed that the lower the ceramic shell strength upon using polymer additives, the lower the hindered contraction rate, and the lower the hindered contraction rate, the smaller the hot tearing tendency. Optical microscopy and electron microscopy scanning revealed that the hot tear propagated along the last solidified interdendritic phase, and that the hot tear surface had two major modes: (1) the ductile region in the outer layer; and (2) the inner region of liquid embrittlement.

36 MATERIALS SCIENCE↗

Dielectric breakdown properties of hot SF{sub 6}/He mixtures predicted from basic data

Sulfur hexafluoride (SF{sub 6}) gas has a quite high global warming potential and hence it is required that applying any substitute for SF{sub 6} gas. Much interest in the use of a mixture of helium and SF{sub 6} as arc quenching medium was investigated indicating a higher recovery performance of arc interruption than that of pure SF{sub 6}. It is known that the electrical breakdown in a circuit breaker after arc interruption occurs in a hot gas environment, with a complicated species composition because of the occurrence of dissociation and other reactions. The likelihood of breakdown relies on the electron interactions with all these species. The critical reduced electric field strength (the field at which breakdown can occur, relative to the number density) of hot SF{sub 6}/He mixtures related to the dielectric recovery phase of a high voltage circuit breaker is calculated in the temperature range from 300 K to 3500 K. The critically reduced electric field strength of these mixtures was obtained by balancing electron generation and loss mechanisms. These were evaluated using the electron energy distribution function derived from the Boltzmann transport equation under the two-term approximation. Good agreement was found between calculations for pure hot SF{sub 6} and pure hot He and experimental results and previous calculations. The addition of He to SF{sub 6} was found to decrease the critical reduced electric field strength in the whole temperature range due to a lack of electron impact attachment process for helium regardless its high ionization potential. This indicates that not the behaviour of dielectric strength but possibly the higher energy dissipation capability caused mainly by light mass and high specific heat as well as thermal conductivity of atomic helium contributes most to a higher dielectric recovery performance of arc interruption for SF{sub 6}/He mixtures.

74 ATOMIC AND MOLECULAR PHYSICS↗

Numerical simulation of temperature field, microstructure evolution and mechanical properties of HSS during hot stamping

The hot stamping of boron steels is widely used to produce ultra high strength automobile components without any spring back. The ultra high strength of final products is attributed to the fully martensitic microstructure that is obtained through the simultaneous forming and quenching of the hot blanks after austenization. In the present study, a mathematical model incorporating both heat transfer and the transformation of austenite is presented. A FORTRAN program based on finite element technique has been developed which permits the temperature distribution and microstructure evolution of high strength steel during hot stamping process. Two empirical diffusion-dependent transformation models under isothermal conditions were employed respectively, and the prediction capability on mechanical properties of the models were compared with the hot stamping experiment of an automobile B-pillar part.

36 MATERIALS SCIENCE↗

Hot electron production in laser solid interactions with a controlled pre-pulse

Hot electron generation plays an important role in the fast ignition approach to inertial confinement fusion (ICF) and other applications with ultra-intense lasers. Hot electrons of temperature up to 10–20 MeV have been produced by high contrast picosecond duration laser pulses focussed to intensities of ∼10{sup 20} W cm{sup −2} with a deliberate pre-pulse on solid targets using the Vulcan Petawatt Laser facility. We present measurements of the number and temperature of hot electrons obtained using an electron spectrometer. The results are correlated to the density scale length of the plasma produced by a controlled pre-pulse measured using an optical probe diagnostic. 1D simulations predict electron temperature variations with plasma density scale length in agreement with the experiment at shorter plasma scale lengths (<7.5μm), but with the experimental temperatures (13–17 MeV) dropping below the simulation values (20–25 MeV) at longer scale lengths. The experimental results show that longer interaction plasmas produced by pre-pulses enable significantly greater number of hot electrons to be produced.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron acoustic wave driven vortices with non-Maxwellian hot electrons in magnetoplasmas

Linear dispersion characteristics of the Electron Acoustic Wave (EAW) and the corresponding vortex structures are investigated in a magnetoplasma in the presence of non-Maxwellian hot electrons. In this regard, kappa and Cairns distributed hot electrons are considered. It is noticed that the nonthermal distributions affect the phase velocity of the EAW. Further, it is found that the phase velocity of EAW increases for Cairns and decreases for kappa distributed hot electrons. Nonlinear solutions in the form of dipolar vortices are also obtained for both stationary and non-stationary ions in the presence of kappa distributed hot electrons and dynamic cold electrons. It is found that the amplitude of the nonlinear vortex structures also reduces with kappa factor like the electron acoustic solitons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the correlation of the Auger generated hot electron emission and efficiency droop in III-N light-emitting diodes

Recent experiments presented in by Iveland et al. [Phys. Rev. Lett. 110, 177406 (2013)] demonstrated that hot electron emission from cesiated p-contacts of III-nitride quantum-well (QW) light-emitting diodes (LEDs) coincides with the onset of the efficiency droop. We have carried out Monte Carlo simulations of hot-electron transport in realistic III-N LEDs. The simulations account for the hole population and all relevant electron scattering and recombination processes. We show that Auger recombination generates a significant hot electron population, which is temporarily trapped in the conduction band side-valleys, without decaying completely before reaching the p-contact. The leakage current due to electron overflow and thermal escape from the QWs is shown to have a minimal impact on the droop. We conclude that the experimentally observed hot electrons are created by Auger recombination in QWs, and that the Auger effect as the origin of the droop is the only consistent explanation for the experimental findings of Iveland et al., [Phys. Rev. Lett. 110, 177406 (2013)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hot-electron energy relaxation time in Ga-doped ZnO films

Hot-electron energy relaxation time is deduced for Ga-doped ZnO epitaxial layers from pulsed hot-electron noise measurements at room temperature. The relaxation time increases from ∼0.17 ps to ∼1.8 ps when the electron density increases from 1.4 × 10{sup 17 }cm{sup −3} to 1.3 × 10{sup 20 }cm{sup −3}. A local minimum is resolved near an electron density of 1.4 × 10{sup 19 }cm{sup −3}. The longest energy relaxation time (1.8 ps), observed at the highest electron density, is in good agreement with the published values obtained by optical time-resolved luminescence and absorption experiments. Monte Carlo simulations provide a qualitative interpretation of our observations if hot-phonon accumulation is taken into account. The local minimum of the electron energy relaxation time is explained by the ultrafast plasmon-assisted decay of hot phonons in the vicinity of the plasmon–LO-phonon resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electroluminescence of hot electrons in AlGaN/GaN high-electron-mobility transistors under radio frequency operation

Hot electrons in AlGaN/GaN high electron mobility transistors are studied during radio frequency (RF) and DC operation by means of electroluminescence (EL) microscopy and spectroscopy. The measured EL intensity is decreased under RF operation compared to DC at the same average current, indicating a lower hot electron density. This is explained by averaging the DC EL intensity over the measured load line used in RF measurements, giving reasonable agreement. In addition, the hot electron temperature is lower by up to 15% under RF compared to DC, again at least partially explainable by the weighted averaging along the specific load line. However, peak electron temperature under RF occurs at high V{sub DS} and low I{sub DS} where EL is insignificant suggesting that any wear-out differences between RF and DC stress of the devices will depend on the balance between hot-carrier and field driven degradation mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasmonic photocatalytic reactions enhanced by hot electrons in a one-dimensional quantum well

The plasmonic endothermic oxidation of ammonium ions in a spinning disk reactor resulted in light energy transformation through quantum hot charge carriers (QHC), or quantum hot electrons, during a chemical reaction. It is demonstrated with a simple model that light of various intensities enhance the chemical oxidization of ammonium ions in water. It was further observed that light illumination, which induces the formation of plasmons on a platinum (Pt) thin film, provided higher processing efficiency compared with the reaction on a bare glass disk. These induced plasmons generate quantum hot electrons with increasing momentum and energy in the one-dimensional quantum well of a Pt thin film. The energy carried by the quantum hot electrons provided the energy needed to catalyze the chemical reaction. The results indicate that one-dimensional confinement in spherical coordinates (i.e., nanoparticles) is not necessary to provide an extra excited state for QHC generation; an 8 nm Pt thin film for one-dimensional confinement in Cartesian coordinates can also provide the extra excited state for the generation of QHC.

36 MATERIALS SCIENCE↗

Hot-carrier-induced linear drain current and threshold voltage degradation for thin layer silicon-on-insulator field P-channel lateral double-diffused metal-oxide-semiconductor

Hot-carrier-induced linear drain current (I{sub dlin}) and threshold voltage (V{sub th}) degradations for the thin layer SOI field p-channel lateral double-diffused MOS (pLDMOS) are investigated. Two competition degradation mechanisms are revealed and the hot-carrier conductance modulation model is proposed. In the channel, hot-hole injection induced positive oxide trapped charge and interface trap gives rise to the V{sub th} increasing and the channel conductance (G{sub ch}) decreasing, then reduces I{sub dlin}. In the p-drift region, hot-electron injection induced negative oxide trapped charge enhances the conductance of drift doping resistance (G{sub d}), and then increases I{sub dlin}. Consequently, the eventual I{sub dlin} degradation is controlled by the competition of the two mechanisms due to conductance modulation in the both regions. Based on the model, it is explained that the measured I{sub dlin} anomalously increases while the V{sub th} is increasing with power law. The thin layer field pLDMOS exhibits more severe V{sub th} instability compared with thick SOI layer structure; as a result, it should be seriously evaluated in actual application in switching circuit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Current gain above 10 in sub-10 nm base III-Nitride tunneling hot electron transistors with GaN/AlN emitter

We report on a tunneling hot electron transistor amplifier with common-emitter current gain greater than 10 at a collector current density in excess of 40 kA/cm{sup 2}. The use of a wide-bandgap GaN/AlN (111 nm/2.5 nm) emitter was found to greatly improve injection efficiency of the emitter and reduce cold electron leakage. With an ultra-thin (8 nm) base, 93% of the injected hot electrons were collected, enabling a common-emitter current gain up to 14.5. This work improves understanding of the quasi-ballistic hot electron transport and may impact the development of high speed devices based on unipolar hot electron transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗