Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOMOGENEITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Selective Bidentate Coordination Reconstructs Residual PbI 2 to Homogenize Interfacial Energetics in Perovskite Solar Cells

Spatially heterogeneous interfacial energetics, often originating from residual lead iodide (PbI 2 ), represent a fundamental bottleneck to both the efficiency and operational stability of perovskite photovoltaics. Conventional PbI 2 passivation strategies based on monodentate ligands or highly polar solvents either interact weakly with PbI 2 or undesirably perturb the underlying three-dimensional perovskite lattice. Here, we report a diammonium bidentate strategy that selectively reconstructs residual PbI 2 into corner-sharing PbI 6 octahedra while preserving the bulk perovskite. Enabled by dual-site coordination, a newly designed thiophene-based bidentate ligand (MeXT) stabilizes PbI 6 units during passivation and establishes spatially homogeneous interfacial energetics. Perovskite solar cells incorporating MeXT achieve 26.19% power conversion efficiency and retain over 80% of their initial efficiency after 1000 h of continuous 1-sun illumination at 75 °C. This dual-anchor coordination passivation strategy establishes a general design principle for selectively treating residual PbI 2 and creating electronically coherent and operationally stable interfaces in perovskite photovoltaics.

ligands↗

Green Rust Reduction of Chromium Part 2: Comparison of Heterogeneous and Homogeneous Chromate Reduction

White and green rusts are the active chemical reagents of buried scrap iron pollutant remediation. In this work, a comparison of the initial electron-transfer step for the reduction of CrO{sub 4}{sup -2} by Fe{sub (aq)}{sup 2+} and Fe(OH){sub 2}(s) is presented. Using hybrid density functional theory and Hartree-Fock cluster calculations for the aqueous reaction, the rate constant for the homogeneous reduction of chromium by ferrous iron was determined to be 5 x 10{sup -2} M{sup -1} s{sup -1} for the initial electron transfer. Using a combination of Hartree-Fock slab and cluster calculations for the heterogeneous reaction, the initial electron transfer for the heterogeneous reduction of chromium by ferrous iron was determined to be 1 x 10{sup 2} s{sup -1}. The difference in rates is driven by the respective free energies of reaction: 33.4 vs -653.2 kJ/mol. This computational result is apparently the opposite of what has been observed experimentally, but further analysis suggests that these results are fully convergent with experiment. The experimental heterogeneous rate is limited by surface passivation from slow intersheet electron transfer, while the aqueous reaction may be an autocatalytic heterogeneous reaction involving the iron oxyhydroxide product. As a result, it is possible to produce a clear model of the pollutant reduction reaction sequence for these two reactants.

36 MATERIALS SCIENCE↗

Preparation of homogeneous gold-silver alloy nanoparticles using the apoferritin cavity as a nanoreactor

Homogeneous Au-Ag alloy nanoparticles have been synthesized in the cavity of horse spleen apoferritin (HSAF) by a diffusion technique. Low concentration of NH4OH solution has been used stabilize Ag(I) ions at pH 8.3, where channels between the subunits of HASF are open for the diffusion of metal ions. The Au-Ag nanoparticle cores are 5.6-6.3 nm in diameter with narrow size distribution (≤ 1.0 nm), and their average diameter was gradually increased with an increase of Ag content. The core formation ratios of Au-Ag-HASF samples are higher than 80%. These series of nanoparticles were applied for the reduction of 4-nitrophenol in the presence of NaBH4. As the Au content was increased in the Au-Ag-HSAF nanoparticles, the rate constant of the reduction was exponentially increased from 1.3 x 10-3 s-1 (pure Ag-HSAF) to 7.58 x 10-2 s-1 (pure Au-HSAF). These synthesized Au-Ag nanoparticles with different compositions will be further applicable in catalysis, sensing, and biomedical areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Super‐Droplet Method to Simulate Lagrangian Microphysics of Nuclear Fallout in a Homogeneous Cloud

Abstract Nuclear detonations produce hazardous local and global particles or fallout. Predicting fallout size, chemical components, and location is necessary to inform officials and determine immediate guidance for the public. However, existing nuclear detonation fallout models prescribe the particle size distributions based on limited observations. In this work, we apply the super‐droplet method, which is a numerical modeling technique developed for cloud microphysics, to simulate size distributions of particles in a mushroom cloud formed post‐detonation of a nuclear device. We model fallout formation and evolution with homogeneous nucleation and condensation of a single species and a Monte Carlo coagulation algorithm. We verify the numerical methods representing coagulation and condensation processes against analytical test problems. Additionally, we explore several scenarios for the integral system mass and yield in equivalent kilotons (kt) of TNT (trinitrotoluene). The fallout size distribution median diameter d pg follows a scaling law based on the integral system mass m v 0 kg and yield Y kt: nm. We test the effect of cloud turbulence, enhanced nucleation and growth, and vapor volatility with a sensitivity study. The range in median diameter predictions for simulations of historical tests performed over the Pacific encompass the measurements of particles sampled from the cloud caps. Predicted median particle size ranges up to 217, 123, 86, and 35 nm for historical tests with yields of 0.2, 0.7, 2, and 10 Mt, respectively. This work can be expanded in many different directions to build a more predictive model for fallout formation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Supramolecular metal-organic frameworks that display high homogeneous and heterogeneous photocatalytic activity for H 2 production

Self-assembly has a unique presence when it comes to creating complicated, ordered supramolecular architectures from simple components under mild conditions. Here, we describe a self-assembly strategy for the generation of the first homogeneous supramolecular metal-organic framework (SMOF-1) in water at room temperature from a hexaarmed [Ru(bpy) 3 ] 2+ -based precursor and cucurbit[8] uril (CB[8]). The solution-phase periodicity of this cubic transition metal-cored supramolecular organic framework (MSOF) is confirmed by small-angle X-ray scattering and diffraction experiments, which, as supported by TEM imaging, is commensurate with the periodicity in the solid state. We further demonstrate that SMOF-1 adsorbs anionic Wells-'Dawson-type polyoxometalates (WD-POMs) in a one-cage-one-guest manner to give WD-POM@SMOF-1 hybrid assemblies. Upon visible-light (500 nm) irradiation, such hybrids enable fast multi-electron injection from photosensitive [Ru(bpy) 3 ] 2+ units to redox-active WD-POM units, leading to efficient hydrogen production in aqueous media and in organic media. The demonstrated strategy opens the door for the development of new classes of liquid-phase and solid-phase ordered porous materials.

36 MATERIALS SCIENCE↗

Redox-homogeneous, gel electrolyte-embedded high-mass-loading cathodes for high-energy lithium metal batteries

Lithium metal batteries have higher theoretical energy than their Li-ion counterparts, where graphite is used at the anode. However, one of the main stumbling blocks in developing practical Li metal batteries is the lack of cathodes with high-mass-loading capable of delivering highly reversible redox reactions. To overcome this issue, here we report an electrode structure that incorporates a UV-cured non-aqueous gel electrolyte and a cathode where the LiNi 0.8 Co 0.1 Mn 0.1 O 2 active material is contained in an electron-conductive matrix produced via simultaneous electrospinning and electrospraying. This peculiar structure prevents the solvent-drying-triggered non-uniform distribution of electrode components and shortens the time for cell aging while improving the overall redox homogeneity. Moreover, the electron-conductive matrix eliminates the use of the metal current collector. When a cathode with a mass loading of 60 mg cm -2 is coupled with a 100 µm thick Li metal electrode using additional non-aqueous fluorinated electrolyte solution in lab-scale pouch cell configuration, a specific energy and energy density of 321 Wh kg -1 and 772 Wh L -1 (based on the total mass of the cell), respectively, can be delivered in the initial cycle at 0.1 C (i.e., 1.2 mA cm -2 ) and 25 °C.

25 ENERGY STORAGE↗

Atomic-scale homogeneous plastic flow beyond near-theoretical yield stress in a metallic glass

Abstract The onset of yielding and the related atomic-scale plastic flow behavior of bulk metallic glasses at room temperature have not been fully understood due to the difficulty in performing the atomic-scale plastic deformation experiments needed to gain direct insight into the underlying fundamental deformation mechanisms. Here we overcome these limitations by combining a unique sample preparation method with atomic force microscopy-based indentation, which allows study of the yield stress, onset of yielding, and atomic-scale plastic flow of a platinum-based bulk metallic glass in volumes containing as little as approximately 1000 atoms. Yield stresses markedly higher than in conventional nanoindentation testing were observed, surpassing predictions from current models that relate yield stress to tested volumes; subsequent flow was then established to be homogeneous without exhibiting collective shear localization or loading rate dependence. Overall, variations in glass properties due to fluctuations of free volume are found to be much smaller than previously suggested.

Yu, Jiaxin↗

Low-temperature synthesis of homogeneous solid solutions of scheelite-structured Ca 1-x Sr x WO 4 and Sr 1-x Ba x WO 4 nanocrystals

Here, a series of compositionally complex scheelite-structured nanocrystals of the formula A 1-x A’ x WO 4 (A = Ca, Sr, Ba) have been prepared under benign synthesis conditions using the vapor diffusion sol–gel method. Discrete nanocrystals with sub-20 nm mean diameters were obtained after kinetically controlled hydro- lysis and polycondensation at room temperature, followed by composition-dependent thermal aging at or below 60 °C. Rietveld analysis of X-ray diffraction data and Raman spectroscopy verified the synthesis of continuous and phase-pure nanocrystal solid solutions across the entire composition space for A 1-x A’ x WO 4 , where 0 ≤ x ≤ 1. Elemental analysis by X-ray photoelectron and inductively coupled plasma- atomic emission spectroscopies demonstrated excellent agreement between the nominal and experi- mentally determined elemental stoichiometries, while energy dispersive X-ray spectroscopy illustrated good spatial elemental homogeneity within these nanocrystals synthesized under benign conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Efficiency analysis of helium-cooled MAS DNP: case studies of surface-modified nanoparticles and homogeneous small-molecule solutions

Despite the growing number of successful applications of dynamic nuclear polarization (DNP)-enhanced magic-angle spinning (MAS) NMR in structural biology and materials science, the nuclear polarizations achieved by current MAS DNP instrumentation are still considerably lower than the theoretical maximum. Here, the method could be significantly strengthened if experiments were performed at temperatures much lower than those currently widely used (~100 K). Recently, the prospects of helium (He)-cooled MAS DNP have been increased with the instrumental developments in MAS technology that uses cold helium gas for sample cooling. Despite the additional gains in sensitivity that have been observed with He-cooled MAS DNP, the performance of the technique has not been evaluated in the case of surfaces and interfaces that benefit the most from DNP. Herein, we studied the efficiency of DNP at temperatures between ~30 K and ~100 K for organically functionalized silica material and a homogeneous solution of small organic molecules at a magnetic field B 0 = 16.4 T. We recorded the changes in signal enhancement, paramagnet-induced quenching and depolarization effects, DNP build-up rate, and Boltzmann polarization. For these samples, the increases in MAS-induced depolarization and DNP build-up times at around 30 K were not as severe as anticipated. In the case of the surface species, we determined that MAS DNP at 30 K provided ~10 times higher sensitivity than MAS DNP at 90 K, which corresponds to the acceleration of experiments by multiplicative factors of up to 100.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zirconium and hafnium polyhedral oligosilsesquioxane complexes – green homogeneous catalysts in the formation of bio-derived ethers via a MPV/etherification reaction cascade

The polyhedral oligosilsesquioxane complexes, {[(isobutyl) 7 Si 7 O 12 ]ZrOPr i ·(HOPr i )}2 (I), {[(cyclohexyl) 7 Si 7 O 12 ]ZrOPr i ·(HOPr i )} 2 (II), {[(isobutyl) 7 Si 7 O 12 ]HfOPr i ·(HOPr i )} 2 (III) and {[(cyclohexyl) 7 Si 7 O 12 ]HfOPr i ·(HOPr i )} 2 (IV), were synthesized in good yields from the reactions of M(OPr i ) 4 (M = Zr, Hf) with R-POSS(OH) 3 (R = isobutyl, cyclohexyl), resp. I–IV were characterized by 1 H, 13 C and 29 Si NMR spectroscopy and their dimeric solid-state structures were confirmed by X-ray analysis. I–IV catalyze the reductive etherification of 2-hydroxy- and 4-hydroxy and 2-methoxy and 4-methoxybenzaldehyde and vanillin to their respective isopropyl ethers in isopropanol as a “green” solvent and reagent. I–IV are durable and robust homogeneous catalysts operating at temperatures of 100–160 °C for days without significant loss of catalytic activity. Likewise, I–IV selectively catalyze the conversion of 5-hydroxymethylfurfural (HMF) into 2,5-bis(isopropoxymethyl)furane (BPMF), a potentially high-performance fuel additive. Similar results were achieved by using a combination of M(OPr i ) 4 and ligand R-POSS(OH) 3 as a catalyst system demonstrating the potential of this “in situ” approach for applications in biomass transformations. A tentative reaction mechanism for the reductive etherification of aldehydes catalysed by I–IV is proposed.

09 BIOMASS FUELS↗

The Laplacian on homogeneous spaces

The solution of the eigenvalue problem of the Laplacian on a general homogeneous space G/H is given. Here, G is a compact, semisimple Lie group, H is a closed subgroup of G, and the rank of H is equal to the rank of G. It is shown that the multiplicity of the lowest eigenvalue of the Laplacian on G/H is just the degeneracy of the lowest Landau level for a particle moving on G/H in the presence of the background gauge field. Moreover, the eigenspace of the lowest eigenvalue of the Laplacian on G/H is, up to a sign, equal to the G-equivariant index of the Kostant's Dirac operator on G/H.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Homogeneous growth of antidot structures electrodeposited on Si by nanosphere lithography

The characteristics of cobalt antidot structures, electrodeposited on Si by nanosphere lithography, is investigated by analysis of current transients and optical and atomic force microscopy. Polystyrene colloidal masks of 1 ML (monolayer) or a maximum of 2, with sphere diameters ranging between 165 and 600 nm were fabricated by spin coating. For masks partially covered with bilayer regions, it is shown that the volume of deposited material in bilayer areas corresponds to only 5% of the cobalt deposited in the monolayer areas. This drastic reduction in the deposition rate affects the quality of the deposit. Therefore, the use of colloidal masks of homogeneous thickness is necessary to guarantee the electrodeposition of nanostructured films of controlled thickness. It will also be shown that the use of high quality colloidal masks yields a reproducible electrodeposition process, enabling the use of the current transient as a reliable tool for assessment of the deposition process.

36 MATERIALS SCIENCE↗

Nanocluster explosions and quasimonoenergetic spectra by homogeneously distributed impurity ions

A plasma expansion into vacuum and the resultant ion acceleration are studied analytically and numerically. The expansion of an initially uniform spherical plasma (consisting of a nanocluster or microdroplet) with radius R{sub u0} and electron density n{sub u0} is driven by the explosion of hot electrons having an initial temperature T{sub e0}. A self-similar solution describes the nonrelativistic expansion of a finite plasma mass with a full account of charge separation effects. Such key features as the energy spectrum, maximum ion energy, and energy transfer efficiency from the electrons to the ions are given by simple analytic formulas as a function of the normalized droplet radius, {lambda}{sub u}=R{sub u0}/{lambda}{sub D}, where {lambda}{sub D}={radical}(T{sub e0}/4{pi}n{sub u0}e{sup 2}) is the Debye length. The solution predicts that impurity ions doped homogeneously in a droplet plasma are accelerated quasimonoenergetically by the electrostatic field generated by the charge separation. The prediction is confirmed by N-body particle simulations. The origin of the monoenergetic spectrum is attributed to the spherical geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Homogeneous deformation of Au-based metallic glass micropillars in compression at elevated temperatures

We performed high-temperature microcompression tests on micron-sized pillar samples fabricated from Au{sub 49}Ag{sub 5.5}Pd{sub 2.3}Cu{sub 26.9}Si{sub 16.3} metallic glass near the glass transition temperature to investigate the homogeneous deformation behavior. Samples were invariably deformed uniformly. The strength was observed to decrease with increasing temperature and decreasing strain rate. Plastic flow behavior can be described by a shear transition zone model. The activation energy and the size of the basic flow unit were both deduced and compared favorably with the theory.

36 MATERIALS SCIENCE↗