Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HEAD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Comparison of two head-up displays in simulated standard and noise abatement night visual approaches

Situation and command head-up displays were evaluated for both standard and two segment noise abatement night visual approaches in a fixed base simulation of a DC-8 transport aircraft. The situation display provided glide slope and pitch attitude information. The command display provided glide slope information and flight path commands to capture a 3 deg glide slope. Landing approaches were flown in both zero wind and wind shear conditions. For both standard and noise abatement approaches, the situation display provided greater glidepath accuracy in the initial phase of the landing approaches, whereas the command display was more effective in the final approach phase. Glidepath accuracy was greater for the standard approaches than for the noise abatement approaches in all phases of the landing approach. Most of the pilots preferred the command display and the standard approach. Substantial agreement was found between each pilot's judgment of his performance and his actual performance.

Cronn, F.↗
NASA NTRS1975

Three methods of presenting flight vector information in a head-up display during simulated STOL approaches

A simulator study was conducted to determine the usefulness of adding flight path vector symbology to a head-up display designed to improve glide-slope tracking performance during steep 7.5 deg visual approaches in STOL aircraft. All displays included a fixed attitude symbol, a pitch- and roll-stabilized horizon bar, and a glide-slope reference bar parallel to and 7.5 deg below the horizon bar. The displays differed with respect to the flight-path marker (FPM) symbol: display 1 had no FPM symbol; display 2 had an air-referenced FPM, and display 3 had a ground-referenced FPM. No differences between displays 1 and 2 were found on any of the performance measures. Display 3 was found to decrease height error in the early part of the approach and to reduce descent rate variation over the entire approach. Two measures of workload did not indicate any differences between the displays.

Dwyer, J. H., III↗
NASA NTRS1974

Tail structures far from the head of Comet Kohoutek. I

Two tail structures 0.1 AU from the head of Comet Kohoutek were photographed during January 1974. One was a wavy structure resembling a helix while the other was an irregular swan-like cloud. Both features were propagating down the tail at approximately 250 km/sec, and the observed speed is probably the phase speed. We discuss the physical origin of these structures and interpret the helix as a kink instability resulting from currents flowing along the tail axis.

Hyder, C. L.↗
NASA NTRS1975

Shadow of the head of Comet Kohoutek

An earlier reported shadow of the head of Comet Kohoutek (1973f) was not found in later photographs of the comet. However, linear dark areas were seen and are described as the space between the plasma and the dust tails. The discrepancy in earlier observations is attributed to low resolution in them. Observation of a shadow is also discounted in terms of cometary physics, due to low dust content and the weakness and curvature of the dust tail.

Brandt, J. C.↗
NASA NTRS1977

Magnetic heading reference

This invention employs a magnetometer as a magnetic heading reference for a vehicle such as a small aircraft. The magnetometer is mounted on a directional dial in the aircraft in the vicinity of the pilot such that it is free to turn with the dial about the yaw axis of the aircraft. The invention includes a circuit for generating a signal proportional to the northerly turning error produced in the magnetometer due to the vertical component of the earth's magnetic field. This generated signal is then subtracted from the output of the magnetometer to compensate for the northerly turning error.

Garner, H. D.↗
NASA NTRS1976

Effects of head-down tilt on fluid and electrolyte balance

The metabolic effects of -5 deg tilt were studied in eight normal individuals. Exposure to tilt for 24 hr increased sodium excretion and decreased plasma volume. Plasma renin activity and plasma aldosterone levels were not significantly different from supine values during the first 6 hr of tilting, but were increased significantly at the end of the 24-hr tilt period. Creatinine clearance and potassium balance were not affected by the tilt. These findings indicate that head-down tilt induces a sodium diuresis and stimulation of the renin-angiotensin-aldosterone system.

Volicer, L.↗
NASA NTRS1977

Instability analysis of torispherical pressure vessel heads with triangular thin-shell finite elements

The elastic instability of an internally-pressurized cylindrical tank with a torispherical head is investigated using a triangular, doubly curved, thin-shell finite element. The formulation of the finite element, which is based upon cubic displacement functions and a modified principle of potential energy, is first described. Then, the element is verified by comparing numerical results for the linear, stable analysis to alternative solutions for the same problem. The subsequent instability investigation includes the solution of the linearized problem of equilibrium bifurcation, that is, of the classical eigenvalue problem, and a general nonlinear analysis, based on tracing the nonlinear load-displacement path. The critical pressure, obtained with use of the general nonlinear analysis, agrees closely with an experimental result as well as with a numerical solution stemming from an axisymmetric formulation.

Kanodia, V. L.↗
NASA NTRS1976

A physical comparison of a fluoroscopic CAT system and the EMI head scanner

A quantitative comparison of the capabilities to produce computerized tomograms was made between the EMI head scanner and reconstructions from images provided by a large screen low light level-TV camera fluoroscopic system. A phantom made from lucite containing rods of various materials and sizes was used. The computer printout of each was analyzed and a correlation of 0.8 was noted between the results of both systems. The differential attenuation detectability of the fluoroscopic system was found to be comparable to or better than the EMI unit. As expected from a consideration of the quantum statistics for each system, the noise in the obtained reconstructions was also comparable. It is concluded that such a fluoroscopic system performs favorably when compared to the presently available commercial systems.

Baily, N. A.↗
NASA NTRS1978

Experimental testing of flight control head up displays

Experiments and tests with 4 generations of head up displays was reported. The CV 191, based on fighter aircraft gunsights was replaced by the CV 193, with several improvements. The CV 193 V incorporates the velocity vector reference mark, eliminates much other data, clusters the rest in a small area of the visual field and is seen together with the outside landscape. The CV 91 presents only velocity vector and total angle of descent data, used when runway and horizon are visible; TC 121 displays an outline of the runway and can be used in visual and instrument approaches.

Berjal, M.↗
NASA NTRS1978

Project plan for joint FAA/NASA head-up display concept evaluation

Head-Up Display (HUD) concept for large commercial turbojet transport aircraft is considered for the its contribution to aviation safety in the form of improved performance during the approach and landing phase flight. The basic reearch areas represent fundamental questions that are still unresolved and which were considered important to the effective use of the HUD by pilots. Project documentation and management responsibilities are outlined.

Haines, R. F.↗
NASA NTRS1978

Simulation and flight evaluation of a head-up landing aid for general aviation

A head-up general aviation landing aid called a landing site indicator (LASI) was tested in a fixed-base, visual simulator and in an airplane to determine the effectiveness of the LASI. The display, which had a simplified format and method of implementation, presented to the pilot in his line of sight through the windshield a graphic representation of the airplane's velocity vector. In each testing model (simulation of flight), each of 4 pilots made 20 landing approaches with the LASI and 20 approaches without it. The standard deviations of approach and touchdown parameters were considered an indication of pilot consistency. Use of the LASI improved consistency and also reduced elevator, aileron, and rudder control activity. Pilots' comments indicated that the LASI reduced work load. An appendix is included with a discussion of the simulator effectiveness for visual flight tasks.

Harris, R. L., Sr.↗
NASA NTRS1980

Dimpling aircraft skins for countersunk-head rivets

Inexpensive hand-operated tool is used to dimple airframe skins to receive countersunk-head rivets. Tool replaces bulky pneumatic equipment normally used for dimpling and is useful for one person operation, thereby saving time and manpower.

Barbour, J. G.↗
NASA NTRS1978

A head-up display for mid-air drone recovery

During mid-air retrieval of parachute packages, the absence of a natural horizon creates serious difficulties for the pilot of the recovery helicopter. A head-up display (HUD) was tested in an attempt to solve this problem. Both a roll-stabilized HUD and a no-roll (pitch only) HUD were tested. The results show that fewer missed passes occurred with the roll-stabilized HUD when the horizon was obscured. The pilots also reported that the workload was greatly reduced. Roll-stabilization was required to prevent vertigo when flying in the absence of a natural horizon. Any HUD intended for mid-air retrieval should display pitch, roll, sideslip, airspeed, and vertical velocity.

Augustine, W. L.↗
NASA NTRS1978

Head tracking at large angles from the straight ahead position

One of the big advantages of a helmet sight in a high performance aircraft is its off-boresight capability in aiming a fire control system. However, tracking data using a target that is moving rapidly and randomly for an extended period of time is missing. This study is intended to provide data in this area that will be of value to engineers in designing head control systems.

Monk, D. L.↗
NASA NTRS1979

A review of some head-up display formats

Two alternate head-up display devices (HUD) were compared for properties relevant to the accurate performance of concurrent tasks in real flight conditions and in various flight modes. The comparisons were made to find the disorientation resistance of the HUDs along with the tracking accuracy, interference resistance, fixation resistance, and error resistance. The use of displacement and flight path information for vertical control is discussed in terms of flight stability. Several combinations of symbols and driving signals are described, including a compensated control law, which were used in simulated flight to deal with wind shear.

Naish, J. M.↗
NASA NTRS1979

The role of cognitive switching in head-up displays

The pilot's ability to accurately extract information from either one or both of two superimposed sources of information was determined. Static, aerial, color 35 mm slides of external runway environments and slides of corresponding static head-up display (HUD) symbology were used as the sources. A three channel tachistoscope was utilized to show either the HUD alone, the scene alone, or the two slides superimposed. Cognitive performance of the pilots was assessed by determining the percentage of correct answers given to two HUD related questions, two scene related questions, or one HUD and one scene related question.

Fischer, E.↗
NASA NTRS1978

Head-up display for Space Shuttle Orbiter

The very nature of Orbiter's approach and landing task must lead to a discussion of a Head-up Display (HUD) as an aid to this task. HUD has been proposed for Orbiter several times since 1970. However, all previous proposals to add HUD to the Orbiter avionics were defeated due to lack of sophistication and accuracy in state-of-the-art HUD systems, a simpler anticipated Orbiter landing task, and the anticipated role of autoland in the Orbiter approach and landing. Recent advances in HUD state-of-the-art and a more realistic understanding of Orbiter flight and handling characteristics make HUD a viable addition to the Orbiter avionics.

Ivins, M.↗